Memory Box

MEM-200

Seamless measurement
data connectivity
The MEM-200 is the device NIDEK products
use for measurement data storage.

MEM-200 Specifications
Interface specifications
RS-232C 4 ports (devices to be connected are as shown below)
Device set as master 1 port for auto refractometer
1 port (max) for lensmeter
3 ports (max) for refractor
1 port (max) for computer
Device set as slave 4 ports (max) for refractor
2 ports (max) for computer
LAN 3 ports
Connection with auto refractometer, lensmeter, computer, or MEM-200
USB 1 port
Connection with barcode scanner or magnetic card reader
Wireless LAN specifications (only for models with wireless LAN function)*
Standard IEEE 802.11a/b/g/n
Frequency 2.4 GHz: 2412 to 2484 MHz (ISM band: 1 to 13 ch)
5 GHz: 4910 to 5825 MHz (W52, W53, W56, and W58)
Modulation method Orthogonal frequency-division multiplexing (OFDM)
Direct-sequence spread spectrum (DS-SS and CCK)
Link rate 802.11n: 6.5 to 150 Mbps
802.11a/g: 6 to 54 Mbps
802.11b: 1 to 11 Mbps
Access method Infrastructure mode (access point and client)
Security WPA, WPA2, WEP (64/128 bits)

Power supply 5 V DC, 0.6 A

Power consumption Input: 100 to 240 V AC, 50/60 Hz
Output: 5 V DC, 2.2 A
Dimensions/mass 182 (W) x 95 (D) x 32 (H) mm / 420 g
7.2 (W) x 3.7 (D) x 1.3 (H)" / 0.9 lbs.
*Only for the countries (regions) certified by the Radio Law
Connection configurations
The MEM-200 enables storing measurement data imported from devices such as the auto
refractometer and lensmeter.
The refractor imports data stored on the MEM-200 for use as initial refraction values.
The measurement data can also be exported to computers for storage and data management.
The specifications for data transfer differ according to each product. Please contact us for further information.

Example 1 Example 2

TS-610 TS-310
RT-6100 RT-3100

LAN/WLAN LAN/WLAN

RS-232C RS-232C

Auto Ref/ Auto Auto Ref/ Auto

Keratometer Lensmeter Keratometer Lensmeter

Example 3 Example 4

TS-610
RT-6100
RT-6100 RT-3100

LAN/WLAN Hub

RS-232C

LAN/WLAN

Auto Ref/ Auto RS-232C

Keratometer Lensmeter

Auto Ref/ Auto

Keratometer Lensmeter
Product/model name: REFRACTOR RT-6100
REFRACTOR RT-3100
Tabletop Refraction System TS-310
The MEM-200 is optional for the Intelligent Refractor RT-6100/3100 and the Tabletop Refraction System TS-610/310.
Brochure and listed features of the device are intended for non-US practitioners.
Specifications may vary depending on circumstances in each country.
Specifications and design are subject to change without notice.

HEAD OFFICE TOKYO OFFICE NIDEK INC. NIDEK S.A. NIDEK TECHNOLOGIES S.R.L. NIDEK (SHANGHAI) CO., LTD. NIDEK SINGAPORE PTE. LTD.
(International Div.) (International Div.) 2040 Corporate Court, Ecoparc, Via dell’Artigianato, Rm3205,Shanghai Multi 51 Changi Business Park
34-14 Maehama, 3F Sumitomo Fudosan Hongo San Jose, CA 95131, U.S.A. 9 rue Benjamin Franklin, 6/A, 35020 Albignasego (Padova), Media Park, No.1027 Chang Central 2, #06-14,
Hiroishi-cho, Gamagori, Bldg., 3-22-5 Hongo, Bunkyo-ku, TEL: +1-408-468-6400 94370 Sucy En Brie, ITALY Ning Rd, Chang Ning District, The Signature 486066,
Aichi 443-0038, JAPAN Tokyo 113-0033, JAPAN +1-800-223-9044 FRANCE TEL: +39 049 8629200 / 8626399 Shanghai, CHINA 200050 SINGAPORE
TEL: +81-533-67-8895 TEL: +81-3-5844-2641 (US Only) TEL: +33-1-49 80 97 97 URL: www.nidektechnologies.it TEL: +86 021-5212-7942 TEL: +65 6588 0389
URL: www.nidek.com URL: www.nidek.com URL: usa.nidek.com URL: www.nidek.fr URL: www.nidek-china.cn URL: www.nidek.sg
[ Manufacturer ]

MEM-200_B01E004