K2 DCN
K2 DCN
Sr. No. Name of Experiment/Assignment/ Sheet / Job/ Project Activity Planned Date Actual Date Remark
A: A:
1 * Amplitude Shift Keying(ASK) using any simulator
B: B:
A: A:
2 Frequency Shift Keying(FSK) using any simulator
B: B:
A: A:
Phase Shift Keying(PSK) using any open source simulation
3
software
B: B:
A: A:
4 *Create and Test standard straight network cable(Universal Colour
Code) using crimping tool
B: B:
A: A:
5 Create and Test standard Cross network cable(Universal Colour
Code) using crimping tool B: B:
A: A:
6 * Generate a Time Division Multiplexing(TDM) signal
using relevant simulation software
B: B:
A: A:
7 *Create a Hybrid Network Using Bluetooth
B: B:
A: A:
8 *Locate the error bit in the given data string by applying
checksum error detection method
B: B:
A: A:
9 *Implement Wireless network
B: B:
A: A:
10 Write a ‘C’ program for parity check error detection
B: B:
A: A:
11 *Write a ‘C’ program for Cyclic Redundancy Check(CRC) error
detection B: B:
A: A:
12 *Write a ‘C’ program for error correction using Hamming
code B: B:
A: A:
13 *Configure static IP address in operating system along with
appropriate subnet mask for given problem B: B:
A: A:
15 *Execute TCP/IP network commands:ipconfig,ping,tracert
B: B:
A: A:
16 *Execute TCP/IP network commands: netstat, pathping,
route
B: B:
A: A:
17 *1) Install Wireshark and configure as packet sniffer-
i)Capture IP,TELNET, FTP packets using Wireshark
B: B:
A: A:
18 Capture TCP and UDP packet using Wireshark
B: B:
A: A:
19 Capture ARP and ICMP packet Traffic using Wireshark
B: B:
A: A:
20 Install Operating System Linux/Windows/Any other Server
B: B:
A: A:
Use FTP protocol to transfer file from one system to another
21 system
B: B:
A: A:
22 Create IPv6 environment in a small network using simulator
B: B:
A: A:
23 *Create HTTP server
B: B:
A: A:
24 *Create computers using Star topology with wired media
B: B:
A: A:
25 Create Tree topology using CISCO packet tracer software
B: B:
A: A:
26 Configure TELNET for remote login
B: B:
*Visit your computer laboratory-
i)Identify the type of topology A: A:
ii)Identify types of connecting devices with specifications
iii)Identify types of cables with specifications
27 iv)List the type of network applications commonly used in the
laboratory B: B:
iv)Draw the layout of installed network
B: B: