Scribd
Upload
33 views5 pages

How To Boot From USB in Windows 7 (With Pictures) - Wikihow

This document provides a step-by-step guide on how to boot from a USB flash drive on a Windows 7 computer, including preparing the USB, accessing the BIOS, and changing the boot order. It emphasizes the need for the USB to be bootable and outlines the necessary key presses to access the Boot menu and BIOS settings. Additionally, it addresses common questions and tips for troubleshooting USB boot issues.

Uploaded by

AMANUALE D
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
33 views5 pages

How To Boot From USB in Windows 7 (With Pictures) - Wikihow

This document provides a step-by-step guide on how to boot from a USB flash drive on a Windows 7 computer, including preparing the USB, accessing the BIOS, and changing the boot order. It emphasizes the need for the USB to be bootable and outlines the necessary key presses to access the Boot menu and BIOS settings. Additionally, it addresses common questions and tips for troubleshooting USB boot issues.

Uploaded by

AMANUALE D
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

How to Boot from USB in Windows 7

Co-authored by Luigi Oppido and Jack Lloyd


Last Updated: May 1, 2024

This wikiHow teaches you how to boot from a USB flash drive rather than your computer's
hard drive on a Windows 7 computer. Booting from a USB allows you to do anything from
run a light operating system to use command line services such as Clonezilla. You can
even use a USB drive to install Windows 7 if needed. To boot from a USB, restart the
computer and press F8 to open the Boot menu. Find the USB options, and move your USB
to the top of the list.

Quick Steps

1. Plug a USB into your computer.


2. Restart your computer.
3. Press F8 before the Windows logo appears.
4. Open the Boot Order menu.
5. Select USB.
6. Move USB to the top of the list.

Part
1 Preparing to Boot

Understand how booting from a USB works. By default, your computer


1 starts up by reading the operating system information from its built-in hard
drive. You can change this by telling it to prioritize plugged-in USB items over the
built-in hard drive.
The settings for your computers boot behavior are in a menu called the BIOS,
which is a pre-startup menu you can access by pressing a key specific to your
computer model as your computer turns on.
In order to boot from a USB flash drive, the flash drive must be set up as a
bootable item, and it must have a disk image (ISO) file with an operating
system or similar service installed on it.

Determine your computer's BIOS key. The key that you press to access the
2 BIOS varies depending on your computer manufacturer and model. You can
look up your computer's BIOS key by typing your computer's manufacturer and
model name, along with "bios key", into a search engine and reviewing the
results, or you can consult your computer's manual if you still have it.
Most computers use one of the function keys (e.g., F12 ) as the BIOS key,
though some computers will use the Esc key or the Del key.
Advertisement

Plug your USB flash drive into your computer. The USB flash drive should
3 plug into one of the rectangular USB ports on your computer's housing.
On a laptop, the USB ports are typically on the sides of the housing, while
desktop computers typically have the USB ports on the front or back of the
tower.

Make the USB flash drive bootable. If your flash drive isn't already
4 bootable, use the Command Prompt or one of the Windows installation tools
to make it so.

Add the file to which you want to boot to the flash drive. Copy the ISO file
5 you want to boot from by clicking it once and then pressing Ctrl + C , then
open your flash drive and press Ctrl + V to paste in the file.
For example, if you're attempting to install or use Ubuntu Linux from the flash
drive, you would paste the Ubuntu ISO file into the flash drive's window.
Skip this step if you created a bootable USB using the Windows 7 or 10
installation tool.

Save and close any open work. Before you proceed with accessing the
6 BIOS, you'll want to save any open work and then close any open programs
to avoid losing your progress.

Advertisement

Part
2 Accessing the BIOS
1 Open Start . Click the multicolored Windows logo in the bottom-left corner
of the screen.

Click Shut down . It's on the right side of the Start menu. Doing so will
2 prompt the computer to begin shutting down.
You may have to confirm this decision.

Wait for your computer to finish shutting down. Once your computer falls
3 completely silent, you can proceed.

4 Press your computer's Power button . Your computer will begin to start
up.

Immediately begin tapping the BIOS key. You'll want to do this as soon as
5 you release the Power button, and don't stop until the BIOS screen appears.

Stop pressing the BIOS key when the BIOS page loads. The BIOS page
6 usually resembles a blue screen with white letters, though your BIOS may
look different. At this point, you're free to change your computer's boot order.

Advertisement

Part
3 Changing Boot Order

Find the "Boot Order" section. You may see this option on the main BIOS
1 screen, but you'll most likely have to scroll left or right (using the left and right
arrow keys, respectively) through the tabs at the top of the screen until you find
the "Boot Order" section.
You'll probably find this section on the Advanced tab, though many BIOS
variations have dedicated Boot Order tabs as well.

Open the "Boot Order" menu. If the "Boot Order" section is a menu item
2 instead of a heading, select it by using the arrow keys and then press
↵ Enter .

Select the "USB" option. Find and scroll down to the "USB" option in the list
3 of boot locations.
Look for the key legend. You'll usually find this in the lower-right side of the
4 screen, though it may be at the bottom of the screen instead.

Determine which key to use to move up the selected option. Usually you'll
5 press the + key to move up the selected option, but check the key legend's
information to be sure.

Move the "USB" option to the top of the list. Press the proper key until the
6 selected "USB" option is at the top of the "Boot Order" list. This ensures that,
when you boot up your computer again, your computer will look for a bootable
USB option instead of defaulting to the hard drive.

Advertisement

Part
4 Booting from USB

Save your changes and exit the BIOS. Press the "Save and Exit" key as
1 specified by the key legend, then press the "Confirm" key when prompted.
For example, you might press Esc to save your changes and then press Y to
confirm that you want to save and exit.
On some computers, like HP or Dell, you can select the boot device
temporarily, so you don't have to change the boot order of your machine. After
you install what you need from the selected boot device, your computer will
restart and boot to the hard drive as usual.

Restart your computer if necessary. If your computer doesn't boot from the
2 USB flash drive the first time, it might have already selected your hard drive
as the boot location. If so, you'll need to restart your computer (with the USB flash
drive plugged in) before proceeding.

Wait for your USB program's menu to appear. Once your computer
3 recognizes the USB flash drive as a bootable location, you should see the
USB flash drive's installed program, service, or menu appear.

Follow any on-screen instructions. When the menu appears, you can
4 proceed with running and/or installing your USB flash drive's program or
service.

Advertisement
Common Questions: Opening BIOS to Boot with USB

What is the boot key for Windows 7?

The boot key for Windows 7 is F8. You can find this key at the top row of your keyboard.

How do I force Windows to boot from USB?

You can force Windows to boot from USB as long as you can get into the BIOS. Make sure the
USB is plugged into your computer before pressing the Boot key.

Why is Windows not letting me boot from USB?

If Windows isn't letting you boot from USB, make sure the USB is in a proper format, such as
FAT32. If it still doesn't work, your USB may be corrupted and you'll need to repair it or try a
different one.

Tips

In some cases, your computer won't recognize the USB flash drive as a bootable
location if it's plugged into the wrong USB port. You can fix this by trying a
different USB port.
If you don't want to use Command Prompt to make the USB flash drive bootable,
you can use a free program such as Live Linux USB Creator instead.

Advertisement

Warnings

Making your USB flash drive bootable will erase the flash drive's contents.
Advertisement

Advertisement

You might also like