Scribd
Upload
14 views8 pages

Exercises Filtre

The document contains a series of exercises focused on designing and analyzing various types of filters, including low-pass, high-pass, band-pass, and band-reject filters. Each problem requires the calculation of parameters such as gain, cutoff frequency, and transfer functions, as well as the plotting of Bode diagrams. The exercises cover both theoretical aspects and practical circuit design considerations.

Uploaded by

Fady Lteif
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
14 views8 pages

Exercises Filtre

The document contains a series of exercises focused on designing and analyzing various types of filters, including low-pass, high-pass, band-pass, and band-reject filters. Each problem requires the calculation of parameters such as gain, cutoff frequency, and transfer functions, as well as the plotting of Bode diagrams. The exercises cover both theoretical aspects and practical circuit design considerations.

Uploaded by

Fady Lteif
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

Exercises:

Problem 1
2000
Find ω0, α and A0, then find ωc for 𝐻(𝑠) = 10𝑠2 +88.6𝑠+1000

Problem 2
a) Design a filter with the following specifications:
- Low Pass 2nd order active
- 3dB Chebyshev
- Cutoff at 22200 Hz
- Total gain = 10 ≈ 20dB
b) Write the transfer function of the circuit
c) Plot the asymptotic and real Bode diagrams

Problem 3
Design a second order Low Pass filter with:
a) Total gain = 10 = 20dB
b) Cutoff = 22000 rd/s
c) Butterworth filter

Problem 4
Given the following circuit:

Vin Vout

a) What is the nature of this filter (LP-HP-BP-BR)?


b) Find A0, ω0, α and ωc
Problem 5
Design a 2dB Chebyshev filter:
- LP active
- 4th order
- fc = 10 kHz

Problem 6
a) Design a 3rd order LP Filter:
- Active
- Total gain = 10
- Fc = 5000Hz
b) Write the transfer function
c) Plot the amplitude Bode diagram

Problem 7
Design a first order filter having the following characteristics:
- High pass
- Gain = 20 dB
- ωc = 10000 rd/s
- Use only capacitors and resistors. Do NOT use inductors

Problem 8
Analyze the following circuit:

Vout

Vin Vout

a) Transfer function
b) Nature of the filter and its order
c) A0, ω0 and ωc
Problem 9
Write the transfer function of the following circuit and deduce its nature:

Vin Vout

Problem 10
a) Design a HP 2dB Chebyshev Filter having the following characteristics:
- ωc = 104 rd/s
- A0 = 20dB
b) Write its transfer function
c) Plot its amplitude bode diagram

Problem 11
Design a 2nd order BP filter having:
- fl = 3kHz
- fh = 3.5kHz
- A0 = 5

Problem 12
With the same circuit in problem 12 design BP filter with fl = 1000 Hz and fc =10000Hz
Problem 13

Vin Vout

a) Write the transfer function


b) Deduce the nature of the filter
c) Find ωh and ωl

Problem 14
Same question as problem 14

Vin Vout

Problem 15

Vin Vout

a) Write the transfer function


b) Nature of the filter
c) Filter parameters
d) Deduce: α β ω0 if C = 0.01 uF, L = 1 H R = 1KΩ

Problem 16
Same questions as problem 16

Vin Vout

Problem 17

Vin Vout

- Transfer function
- Nature
- ω0, ωh, ωl¸A0, Q and α
Problem 18

Vin Vout

R1 = 1kΩ R2 = 1kΩ R3 = 9kΩ R4 = 1kΩ


R5 = 1kΩ R6 = 9kΩ C1 = 1uF C2 = 0.1uF
- Write the transfer function of this filter
- Deduce its nature and order
- Calculate it cutoff frequency

Problem 19
2000𝑠
For 𝐻(𝑠) = 5𝑠2 +200𝑠+50000

Find the type of the filter, its order, ω0, α, β, Q, ωc, ωh, ωl
Problem 20

Vout
Vin

- For this circuit, show it’s a BP filter


- Find : order, ωc, α, β, ωh, ωl

Problem 22
0.4 2
100 𝑠
10
Given 𝐻(𝑠) = 𝑠 2 0.2
(( ) + 𝑠+1)(𝑠2 +2𝑠+100)
10 10

Find A0 , α, β, Q, ωc, ωh, ωl


Problem 23

Vin Vout

Analyze the circuit.

You might also like