Motion

Scalar Quantities : Physical quantities which have magnitude only and no

direction are called scalar quantities.

Example : Mass, speed, volume, work, time, power, energy etc.

Vector Quantities : Physical quantities which have magnitude and direction both
and which obey triangle law are called vector quantities.

Example : Displacement, velocity, acceleration, force, momentum, torque etc.

e
Electric current, though has a direction, is a scalar quantity because it does not
obey triangle law.
Moment of inertia, pressure, refractive index, stress are tensor quantities.

om
Distance : Distance is the length of actual path covered by a moving object in a
given time interval.

Displacement : Shortest distance covered by a body in a definite direction is

called displacement.

1. Distance is a scalar quantity whereas displacement is a vector quantity both

having the same unit (metre)
hr
2. Displacement may be positive, negative or zero whereas distance is always
positive.

3. In general, magnitude of displacement = distance

c

Speed : Distance travelled by the moving object in unit time interval is called
speed i.e. speed = Distance/Time It is a scalar quantity and its SI unit is metre /
second (m/s).
jk

Velocity : Velocity of a moving object is defined as the displacement of the

object in unit time interval i.e. velocity = Displacement / Time

It is a vector quantity and its SI unit is metre / second.

Acceleration : Acceleration of an object is defined as the rate of change of

velocity of the object i.e. acceleration = Change in Velocity / Time

It is a vector quantity and its SI units is metre / second2 (m/s2)

 If velocity decreases with time then acceleration is negative and is called
retardation.

Circular Motion : It an object describes a circular path (circle) its motion is called
circular motion. If the object moves with uniform speed, its motion is uniform
circular motion.

Uniform circular motion is an accelerated motion because the direction of velocity

changes continuously.

Angular Velocity : The angle subtended by the line joining the object from the

e
origin of circle in unit time interval is called angular velocity.

It is generally denoted by ? and ? = ?/T

om
If T = time period = time taken by the object to complete one revolution, n =
frequency = no. of revolutions in one second.
then nT = 1 & ? = 2,,/T=2pn.

----> In one revolution, the object travels 2pr distance.

Linear speed = ?r = angular speed x radius

Newton's laws of motion : Newton, the father of physics established the laws of
motion in his book "principia" in 1687.
hr
Newton's first law of motion : Every body maintains its initial state of rest or
motion with uniform speed on a straight line unless an external force acts on it.

1. First law is also called law of Galileo or law of inertia.

c

2. Inertia : Inertia is the property of a body by virtue of which the body opposes
change in its initial state of rest or motion with uniform speed on a straight line.
jk

----> Inertia is of two types (i) Inertia of rest (ii) Inertia of motion

Some examples of Inertia :

(i) When a car or train starts suddenly, the passengers bends backward.

(ii)When a running horse stops suddenly, the rider bends forward.

(iii)When a coat / blanket is beaten by a stick, the dust particles are removed.

First law gives the definition of force.

 Force : Force is that external cause which when acts on a body changes or tries
to change the initial state of the body.

Momentum : Momentum is the property of a moving body and is defined as the

product of mass and velocity of the body i.e.
momentum = mass x velocity.

It is a vector quantity. Its SI unit is kgm/s.

Newton's second law of motion : The rate of change in momentum of a body is

directly proportional to the applied force on the body and takes place in the

e
direction of force.

If F = force applied, a = acceleration produced and m = mass of body the nF =

ma.

om
----> Newton's second law gives the magnitude of force.

----> Newton's first law is contained in the second law.

Newton's Third Law of Motion : To every action, there is an equal and opposite
reaction.
Examples of third law-(i) Recoil of a gun (ii) Motion of rocket (iii) Swimming (iv)
While drawing water from the well, if the string breaks up the man drawing water
hr
falls back.

Principle of conservation of linear momentum : If no external force acts on a

system of bodies, the total linear momentum of the system of bodies remains
constant.
As a consequence, the total momentum of bodies before and after collision
c

remains the same.

Impulse : When a large force acts on a body for very small time, then force is
jk

called impulsive force. Impulse is defined as the product of force and time.
Impulse = force x time = change in momentum.

----> It is a vector quantity and its direction is the direction of force. Its SI unit is
newton second (Ns).

Centripetal Force : When a body travels along a circular path, its velocity
changes continuously. Naturally an external force always acts on the body
towards the centre of the path.
The external force required to maintain the circular motion of the body is called
centripetal force.
 If a body of mass m is moving on a circular path of radius R with uniform
speed v, then the required centripetal force, F = mv2/R.

Centrifugal Force : In applying the Newton's laws of motion, we have to

consider some forces which can not be assigned to any object in the
surrounding. These forces are called pseudo force or inertial force.
Centrifugal force is such a pseudo force. It is equal and opposite to centripetal
force.

----> Cream separator, centrifugal drier work on the principle of centrifugal force.

e
----> Centrifugal force should not be confused as the reaction to centripetal force
because forces of action and reaction act on different bodies.

Moment of force : The rotational effect of a force on a body about an axis of

om
rotation is described in terms of moment of force.
Moment of a force about an axis of rotation is measured as the product of
magnitude of force and the perpendicular distance of direction of force from the
axis of rotation.
i.e. Moment of force = Force x moment arm

----> It is a vector quantity.

----> Its SI unit is newton metre (Nm)

hr
Centre of Gravity : The centre of gravity of a body is that point through which
the entire weight of body acts. The centre of gravity of a body does not change
with the change in orientation of body in space.
The weight of a body acts through centre of gravity in the downward direction.
Hence a body can be brought to equilibrium by applying a force equal to its
c

weight in the vertically upward direction through centre of gravity.

Equilibrium : If the resultant of all the forces acting on a body is zero then the
jk

body is said to be in equilibrium.

If a body is in equilibrium, it will be either at rest or in uniform motion. If it is at
rest, the equilibrium is called static, otherwise dynamic.
Static equilibrium is of the following three types :

(i)Stable Equilibrium : If on slight displacement from equilibrium position, a

body has tendency to regain its original position, it is said to be in stable
equilibrium.
 (ii)Unstable equilibrium : If on slight displacement from equilibrium position, a
body moves in the direction of displacement and does not regain its original
position, the equilibrium is said to unstable equilibrium. In this equilibrium, the
centre of gravity of the body is at the highest position.

(iii)Neutral Equilibrium : If on slight displacement from equilibrium position a

body has no tendency to come back to its original position or to move in the
direction of displacement, it is said to be in neutral equilibrium. In neutral
equilibrium, the centre of gravity always remains at the same height.

Conditions for stable Equilibrium : For stable equilibrium of a body, the

e
following two conditions should be fulfilled.

(i)The centre of gravity of the body should be at the minimum height.

om
(ii) The vertical line passing through the centre of gravity of the body should pass
through the base of the body.
c hr
jk