Scribd
Upload
8 views6 pages

Stastic Exercises in English

The document outlines a series of statics problems involving structures with various loads and supports. Each problem requires proving equilibrium under applied loads and determining support reactions at specified points. The problems involve different configurations and parameters, emphasizing the analysis of forces and moments in static systems.

Uploaded by

truog6808
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
8 views6 pages

Stastic Exercises in English

The document outlines a series of statics problems involving structures with various loads and supports. Each problem requires proving equilibrium under applied loads and determining support reactions at specified points. The problems involve different configurations and parameters, emphasizing the analysis of forces and moments in static systems.

Uploaded by

truog6808
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 6

STATICS

1.
Given a structure with supports and it is subjected a load as shown in figure 1. Given M =
5(KN.m), q = 10(KN/m), P = 9(KN), a = 0.5(m), α = 60o.
a) Prove that the structure is always in equilibrium under any applied loads.
b) Determine all support reactions at point D, B and reactions within AB bar.
(Assume that the weights of bodies are negligible)

Figure 1

2.
Given a structure with supports and there is an applied load on it shown in figure 2.
Given q, L, M=qL2. The weights of all bodies in the system and the frictions are
negligible.
a) Is the system always in equilibrium under any applied loads? Give the answer in
detail.
b) Determine all support reactions at A, C and E in term of q and L.
Figure 2

3.
Given a system with supports and it is subjected a linear load as shown in figure 3. Given
q, L, M=qL2. The weights of all bodies in the system and the frictions are negligible.
a) Is the system always in equilibrium under any applied loads? Give the answer in
detail.
b) Determine all support reactions at A, C and E in term of q and L.

Figure 3

4.
A system is established as figure 4 with AB = 2a = CD = 2CB, F = qa. The
weights of bodies and frictions are negligible.
a) Is that system always in equilibrium with any applied load? Why?
b) Determine the reactions at A and B according to each of the two following
values of M.
- M = (√2qa2 ) / 2
- M = 2qa2
Figure 4

5.
A system is established as figure 5 with M = ql2. The weights of bodies and
frictions are negligible.
a) Is that system always in equilibrium with any applied load? Why?
b) Illustrate the reactions at A, C and E as functions of q and l.

Figure 5

6.
A system is established as figure 6 with P = 2qa, M = qa2. The weights of bodies
and frictions are negligible.
a) Is that system always in equilibrium with any applied load? Why?
b) Illustrate the reactions at A, B and D as functions of q and a.
Figure 6

7.
Given a
structure
including
beams and
trusses on
which there
are forces
like the
diagram (Figure 7). Friction
forces and weights of all
bodies can be neglected. It is
stipulated that the reactions
are negative corresponding Figure 7
to compressed bars. Given
F1= 6√2 kN, F2= 6 kN, F3= 4 kN, a= 1 m.
1) Determine the degree of freedom of the structure. Is the structure always in
equilibrium under any applied loads?
2) Determine reactions at cantilever A and all reactions exerted within ED bar.
3) Determine all reactions acted within bar 1 and bar 2.

8.
Given a structure with their supports on which there are external forces like figure
8. Neglect friction forces at point D. Given a= 0.6 m, b= 0.4 m, AD=2BD= 2a,
CD=CE=b, P= 600N, Q=2P, q=1000 N/m. Determine all reactions at cantilever A
in two cases:
1) M= 300 Nm
2) M= 600 Nm
Figure 8
9.
Given a mechanical structure includes their supports on which there are external
forces like figure 9. Given q, a, P= 2qa and M= qa 2 and all friction forces and
weights of bodies are negligible. Determine all reactions at A. C and E in terms of
q and a.

Figure 9

10.
A mechanical system is shown as in figure
10 with a = 0.6 m, b = 0.4 m, AB = 2a, P =
600 N, CB = BD = DE = b, q = 1000 N/m.
Friction at B is negligible. Determine the
reactions at support A corresponding to
each of the following conditions.
1) M = 500 Nm
2) M = 700 Nm

Figure 10
11.
A mechanical system is shown as in figure 11 with R = 2r = 1 m; α = 60 o, AB =
3m, P = 2 KN, Q = 1 KN, M = 1.5 KNm.
Determine the reactions at A and the tensile force at E. The friction at external pin
B is negligible.

Figure 11

You might also like