Scribd
Upload
24 views3 pages

Ac Mid-2 Important Questions

The document outlines important questions for an Analog Communications midterm exam, covering topics from Units 3 to 5. It includes both short and long answer questions on FM detection, receiver types, modulation, noise sources, and various communication principles. The prescribed textbook for reference is 'Communication Systems' by Simon Haykin, 2nd Edition.

Uploaded by

shaikmajili07
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
24 views3 pages

Ac Mid-2 Important Questions

The document outlines important questions for an Analog Communications midterm exam, covering topics from Units 3 to 5. It includes both short and long answer questions on FM detection, receiver types, modulation, noise sources, and various communication principles. The prescribed textbook for reference is 'Communication Systems' by Simon Haykin, 2nd Edition.

Uploaded by

shaikmajili07
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

ANALOG COMMUNICATIONS MID-2 IMPORTANT QUESTIONS(21-4-25)

UNIT-3
SHORT ANSWER QUESTIONS
1.What is the role of a zero-crossing detector in FM detection?
2. Give the comparisons between AM and FM receivers.
3. Explain different types of angle modulations

Long Answer Questions


1.With a neat block diagram explain the Armstrong method of FM generation.
2. Determine the permissible range maximum modulation index for i)commercial FM which
has 30hz to 15khz modulating frequencies ii)narrow band FM system which allows maximum
deviation of 10khz and 100hz to 3Khz modulating frequencies.
3. Explain the foster seely discriminator method of FM detection?
4. Explain the demodulation of F.M signal with the help of PLL.
UNIT-4
Short Answer Questions
1.Explain the following terms: i) Selectivity ii)Fidelity iii) Sensitivity
2. Draw the block diagram of Communication Receivers
3. What are the advantages of the super heterodyne principle over other receiver
types?

Long Answer Questions


1. Draw the block diagram of superhetrodyne receiver and the function of each block
2. Explain the working of TRF receiver with the help of block diagram.
3. Explain characteristics of radio receivers.
4. What are the main functions served by an I.F amplifier? Explain in detail.
5. What is the significance of Harmonic generator in transmitters?
6. How F.M Receivers are different from A.M receivers? Explain in detail.
UNIT-5
Short Answer Questions

1.Define the terms or Sources of noise (i) shot noise (ii) thermal noise/White Noise
iii) Partition noise iv) Low frequency & High Frequency Noise.
2. Define noise figure and what is its significance
3. Define pre-emphasis and de-emphasis in FM wave.
4. List out the different types of pulse modulation?

Long Answer Questions


1. Derive the Noise in AM System
2. Explain the single polarity and double polarity PAM. Compare TDM and FDM.
3. Explain, how a PPM signal can be generated from PWM signal? along with block
diagram
4. Draw the pre emphasis circuit and explain its working? Distinguish between PWM &
PPM.
5. Mention and explain different methods for generation of PWM.

Prescribed Text Book : CommunicationSystems by Simon Haykin 2nd Edition.

-------------------------------------------ALL THE BEST--------------------------------------

You might also like