0% found this document useful (0 votes)

99 views22 pages

7ei SBC Loa

The document is a Letter of Acceptance issued by the South Western Railway to M/s E To E Transportation Infrastructure Private Limited for the replacement of interlocking systems at several railway stations. The total contract value is approximately Rs. 289.74 million, with specific terms regarding security deposits and performance guarantees outlined. The work is expected to be completed within 12 months from the date of acceptance, with additional details on the awarded quantities and rates for various items included.

Uploaded by

Madhusudan R

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

99 views22 pages

7ei SBC Loa

Uploaded by

Madhusudan R

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 22

8/17/23, 5:40 PM ireps.gov.in/epsn/works/tds/publishLOAWorksLetter.do?

Action=ViewPublishedLetter&nitOId=67766682&tdId=1654305&letter…

SOUTH WESTERN RLY

BNC-PROJECT-S AND T
Office of the
Dy.CSTE/Pro/BNC, CANTT Rly
station Road, Bamboo Bazar
Bangalore, 560051
Karnataka, India

Letter No: BNC-PROJECT-S AND T / B-SG-Proj-SEVEN-STN-EI /

Dated: 17/08/2023
00897250084711

M/s E TO E TRANSPORTATION INFRASTRUCTURE PRIVATE

LIMITED-BANGALORE
Amrutha Varshini 325 3rd A Cross Sector A
Yelahanka New Town Bangalore
Bangalore- 560064
Karnataka, India

Sub: Letter Of Acceptance

Ref: 1. Tender No. B-SG-Proj-SEVEN-STN-EI closing date 12-05-2023 11:00 for

Replacement of over aged Interlocking of Kelamangalam, Periyanagathunai,
Rayakkottai, Marandahalli, Palakkodu, Toppur and Karuvalli stations in Hosur -
Salem Section of Bengaluru Division with Electronic Interlocking.
2. Your bid ID 15167686 dated 12/05/2023 10:53

The Competent Authority has accepted your offered rates in connection with the subject work. The
total cost of the work at the accepted rates works out to Rs. 289738314.14 (Rupees Twenty-Eight Crore
Ninety-Seven Lakh Thirty-Eight Thousand Three Hundred And Fourteen Rupees And Fourteen Paise
Only)

A sum of Rs.1480400 deposited as Earnest Money vide IREPS reference ID PE592118572450 has
been retained towards initial Security Money for due and faithful fulfillment of the contract, and the
balance Security Money will be recovered from the progressive bills @ 6 % of the bill amount till it
reaches 5 % of the contract value in terms of clause 16(1) of IRSGCC - April - 2022.

You are requested to submit Performance Guarantee in the form as given in Clause 16(4) of IRSGCC
- April - 2022 equivalent to 5 % of the contract value amounting to Rs. 14486915.71 (Rupees One Crore
Fourty-Four Lakh Eighty-Six Thousand Nine Hundred And Fifteen Rupees And Seventy-One Paise
Only) within 21 days from the date of issue of Letter of Acceptance, valid up to stipulated date of
completion plus 60 days so that contract agreement can be executed.

The entire work shall be completed within 12 month from the date of issue of Letter of Acceptance.

Special Case Rate: Rates quoted for Schedule 'G' item No. 1 to 48 are accepted as a special case rates and
should not be taken as a reference for future tenders

All Other terms and conditions, as stipulated in the tender documents shall be applicable.

VENKATA SURESH KUMAR ORUGANTI

CSTE/Proj/2/SWR
Digitally Signed
View Signature Details

Awarded Quantities And Rates

Item Item Desc Item Item Qty Unit Escl. Advt.Value Bid Rate/ Unit Bid Amount
Sno. Code Qty Unit Rate(Rs) (%) (Rs) Rate (Rs)

Schedule A-Schedule-A (Item Directory - SOR 2011 (S&T)-Ver-1) 18637879.15 59.00 % Above 29634227.85
1 SCHEDULE-A View Details At Par 18637879.15
Schedule Totals 29634227.85
Schedule B-SCHEULE-B VETTED SIGNALLING ITEMS (SUPPLY-SOR) (Item Directory -
30217447.00 6.00 % Above 32030493.82
NS_Vetted_Signalling_ Items_2019-Ver-4)
SCHEULE-B VETTED SIGNALLING ITEMS (SUPPLY-
1 View Details At Par 30217447.00
SOR)
Schedule Totals 32030493.82
Schedule C-SCHEULE-C (EXECUTION-SOR) (Item Directory - NS_Vetted_Signalling_
14381842.00 0.00 % At Par 14381842.00
Items_2019-Ver-4)
1 SCHEDULE-C (EXEUCTIN -SOR ) View Details At Par 14381842.00
Schedule Totals 14381842.00
Schedule D-SCHEDULE-D (SUPPLY & INSTALLATION-SOR) (Item Directory -
24890431.00 2.00 % Above 25388239.62
NS_Vetted_Signalling_ Items_2019-Ver-4)
1 SCHEDULE-D (SUPPLY & INSTALLATION-SOR) View Details At Par 24890431.00
Schedule Totals 25388239.62

Schedule F-SCHEDULE-F (MSDAC) (Item Directory - Not Applicable) 38007760.00

"Multi Section Digital Axle Counter (MSDAC):

Supply, Design, Installation, Testing and
Commissioning of Multi Section Digital Axle
Counter (MSDAC) complete system as per RDSO
Specification No. RDSO/SPN/176/2013 version.3
with latest amendments STR No. SIQ 0001
Ver.2.0 or latest. Tentative Signal and Interlocked
Plans for Seven Stations are enclosed in Technical
Specifications. MSDAC Reset procedure shall be
as per SWR MSDAC Reset policy. Tenderer shall
design the scheme for provision of required
number of evaluators, reset equipment's,
trackside junction boxes, detection points and
track clearance relays etc and shall be submitted
along with the offer. Remote Diagnostic System Per
1 shall be provided at Every station. Total cost 1 104 Detection 363440.00 At Par 37797760.00 372526.00 Rs/Unit 38742704.00
breakup and Station wise shall be given against Point (DP)
the Tender for OEM components along with the
offer or before issue of LOA. Length of the cable
required for each DP and Rail Type will specified
at the time of issuing call Letter. [This schedule
also includes supply of 10% all types of cards, LV
Boxes, Wheel sensors and other essential
modules as specified in RDSO Spec, it shall be
rounded to nearest integer subjected minimum of
one item. For calculating the 10% spares, total
quantities of DPs of Seven stations to be
considered. One set of Specialized Tool and
Measuring equipment's as per RDSO
specifications shall be supplied for every 50 DPs
rounding to the nearest integer].
Tool set for wheel sensor mounting and
maintenance of MSDAC consisting of torque
2 wrench, ratchet, testing plate, measuring tape, 2 2 Numbers 105000.00 At Par 210000.00 107625.00 Rs/Unit 215250.00
screw driver, and gloves and multi meter fluke
115
Schedule Totals 38957954.00

Schedule G-SCHEULE-G (MISC) (Item Directory - Not Applicable) 7909163.94

Supply of universal DTMF way station control

1 telephone conforming to spec., No.IRS.TC- 1 20 Numbers 6500.00 At Par 130000.00 7150.00 Rs/Unit 143000.00
82/2005.Inspection:Consignee
Supply of power supply unit for universal DTMF
way station control phone conforming to
2 2 7 Numbers 5500.00 At Par 38500.00 6050.00 Rs/Unit 42350.00
spec.No.IRS:TC-72/97 or latest with 12V/7AH MF
battery. Inspection: Consignee
Supply of low loss RF coaxial cable RG 217U with
silver tipped connectors on both ends, 30 meters
3 3 7 Numbers 8700.00 At Par 60900.00 9570.00 Rs/Unit 66990.00
length (including BNC connectors suitable to
connect 25W VHF set and GP Antenna)
Supply of caller ID phone similar to M71 White
4 Colour Beetel make [Detailed Specification in 4 28 Numbers 1300.00 At Par 36400.00 1430.00 Rs/Unit 40040.00
Technical Document]
Supply of Power supply, SMPS, 12V-For
Equipment: Transreceiver HF/VHF/UHF,
5 5 7 Numbers 5000.00 At Par 35000.00 5500.00 Rs/Unit 38500.00
Mobile/Static, Output Current:15A,
Charging:Float and Boost Make:Axiom or similar
Supply of Media convertor for single mode fiber
6 similar to TP link make gigabit single mode 6 7 Numbers 4980.00 At Par 34860.00 5478.00 Rs/Unit 38346.00
convertor MC 210CS
7 Supply of Insulation tester similar to Fluke-1507 7 2 Numbers 60000.00 At Par 120000.00 66000.00 Rs/Unit 132000.00
Supply of 4G Fixed cellular Terminal (FCT) with
battery backup of Make Matrix and Advanced with
8 8 7 Numbers 8500.00 At Par 59500.00 9350.00 Rs/Unit 65450.00
WIFI, RJ45 LAN Network and Telephone
connection on 4G LTE
Supply of Machine crimpped CAT 6 patch cord 2
9 9 35 Numbers 150.00 At Par 5250.00 165.00 Rs/Unit 5775.00
mtr length
Suplly of CAT-6 UTP cable D-Link Make or better
10 10 4270 Metre 29.50 At Par 125965.00 32.45 Rs/Unit 138561.50
(305 mtr=1box)
6 dB gain ground plane antenna for VHF mobile
transceiver, 25W synthesized, configuration VM4,
11 11 7 Numbers 2153.50 At Par 15074.50 2368.00 Rs/Unit 16576.00
band136-174 Mhz full band, impedance 50 Ohms
unbalanced with all accessories for mounting
Digital Clock with GPS Synchronization suitable
for office complex with Red LED (Standalone
mode each clock with GPS receiver) as per RDSO
12 Specification No:RDSO/SPN/TC@47>47@2008 12 14 Numbers 19942.00 At Par 279188.00 21936.20 Rs/Unit 307106.80
(Rev.3.0) with amendment No.2 Firm's
Offer:MAKE/BRAND:AS PER RDSO
SPECIFICATION
Supply of Steel table of 700mm(H)X900mm(W) X
450(D) with a single shelf three sides covered
13 with perforated sheets and front provided with 13 7 Numbers 8024.00 At Par 56168.00 8826.40 Rs/Unit 61784.80
leaf doors with external locking facility [Detailed
Specification in Technical Document]
14 Supply of Magneto telephone as per RDSO 14 35 Numbers 5307.00 At Par 185745.00 5837.70 Rs/Unit 204319.50
Specification No.IRS:TC:36/97 Amendmnt No.2 or

https://www.ireps.gov.in/epsn/works/tds/publishLOAWorksLetter.do?Action=ViewPublishedLetter&nitOId=67766682&tdId=1654305&letterId=785… 2/22
8/17/23, 5:40 PM ireps.gov.in/epsn/works/tds/publishLOAWorksLetter.do?Action=ViewPublishedLetter&nitOId=67766682&tdId=1654305&letter…
latest Make: TeleReach (Preferred-M12 Model)
Supply of 12v 65Ah sealed power safe SMF
15 15 7 Numbers 15000.00 At Par 105000.00 16500.00 Rs/Unit 115500.00
battery
"Excavation of jointing pit without damaging the
fiber and provision of joint chamber of 1.2 Mtr.
dia , 0.60Mtr. height and 50 mm. thickness with
two piece top cover and bottom cover with holes
for drainage and cable entry (The reinforcement
drawing enclosed ). This includes backfilling and
16 16 29 Numbers 5500.00 At Par 159500.00 6050.00 Rs/Unit 175450.00
ramming of the trench after placing the joint
closure and cable loop in the chamber without
causing any damage to the same and
consolidation of soil as well as disposal of soil as
per plan and as advised by railways
representative. "
Shifting and Wiring of RCIL Equipments, SDH
ADMs, PDMUX, Maple MUX with accessories,
surge protection arrangement, FDF, racks, DDF,
runway ladder and Shifting & re-wiring of
PRS/UTS Equipment etc which available in
OFC/SM Room. this includes connecting all pig
tails and optical patch cards etc. to SDH and
primary mux equipment with all interface cards to
48V bus including supply of wires and connectors,
terminations of all E1s on DDF, termination of VF
17 interface circuits to krone type MDF at both ends 17 7 Numbers 45200.00 At Par 316400.00 49720.00 Rs/Unit 348040.00
including taking PVC cable over runway or a wall,
krone type DP with all surge and lighting
protection complete for all the circuits derived
from PD mux. This work includes wiring and
connection of telephones in SM's room and
extension of generator supply equipment. All
miscellaneous materials like power wires conduit
and accessories etc. shall be supplied by the
contractor. Suitable link panel should be provided
on this rack for testing and isolation of fault.
Provision of derivation joint for Emergency
Control using thermo shrinkable jointing kit using
miniature tapping transformer of 470:1120ohms
impedance . One pair for auto phone wires should
be taken out and dropped in separately and
terminated in the EMC box. After the jointing the
18 through cable has to be tested for insulation 18 14 Numbers 5500.00 At Par 77000.00 6050.00 Rs/Unit 84700.00
resistance and loop resistance in presents of
Railway Engineer and in case of any defects the
jointing has to be re-done free of cost by the
contractor. Thermal sleeves to be provided over
the individual conductors after jointing the
conductors.
Supply and installation of fiber management
system (SC type) and termination of IN and OUT
24 fiber OFC cable as per RDSO/SPN/TC-37/2000
19 19 15 Numbers 22000.00 At Par 330000.00 24200.00 Rs/Unit 363000.00
(Rev.3.0) Amdt-2. (with all connector material)
routing/dressing fiber as per direction of
engineer/in charge.
"Supply of covered 19"" racks 42 U complete with
all fitting for housing the subrack SDH ADMs & PD
Mux fully wired including, Power supply
distribution system, DDF, Internal wiring and
other accessories, runway ladder etc. The
components of the rack are specified below- (i)
Rack size 2200 HX 600 WX 600 D (ii) Fixed side
panels 42U X 600 D (iii) Front glass door plain
42U X 600D (iv) Rear MS door plain 42 U X 600W
20 (v) Levelling screws-4 Nos. (vi) Compact Fan 20 7 Numbers 29892.00 At Par 209244.00 32881.00 Rs/Unit 230167.00
Module working with 48 V DC- 2 Nos. (vii) Earth
connecting kit-1 No. (viii) Cable manager with
cable loops-2 Nos. (ix) Krone mounting bracket-
01 No (x) Caster with breaks-2Nos (xi) 20""
length 1"" width 5 mm thickness copper strip with
12 Nos. of holes including SS bolts & nuts for
every hole to connect cables-2 Nos. (xii) 10A
single pole DC MCB-2 Nos. (xiii) 6 A single pole
DC MCB-2 Nos."
Supply & installation of OFC joint closure (Normal
21 Joint/ T-Joint) including splicing (24 Fiber).The 21 29 Numbers 16500.00 At Par 478500.00 18150.00 Rs/Unit 526350.00
joint enclosure should be Raychem,3-M or Similar
Supply and installation of 48V,200AH VRLA
battery bank as per specification No.IRS-S-
22 22 7 Numbers 180000.00 At Par 1260000.00 198000.00 Rs/Unit 1386000.00
93/96A[One set battery bank contains 24 nos of
2v/200AH cells ]Inspection Clause RDSO
Supply and installation of SMPS charger 230V AC
50Hz input and 48V DC/25 Amps output in (2+1
23 23 7 Numbers 190000.00 At Par 1330000.00 209000.00 Rs/Unit 1463000.00
configuration) suitable for VRLA battery as per
RDSO specs: RDSO/SPN/TL/23/99 ver.4. or latest
24 Installation, testing and commissioning of 25 24 7 Numbers 7400.00 At Par 51800.00 8140.00 Rs/Unit 56980.00
Watt VHF set with GP antenna and antenna cable
of length 30 M, power supply and battery of 12V
65AH. This includes supply and fixing of GI pipe
of suitable dia to the required hight as per the
guidance of the field engineer, wiring of antenna
cable through PVC conduit. All the materials
required for installation to be supplied by the
contractor.VHF equipment, SMPS poer supply,

https://www.ireps.gov.in/epsn/works/tds/publishLOAWorksLetter.do?Action=ViewPublishedLetter&nitOId=67766682&tdId=1654305&letterId=785… 3/22
8/17/23, 5:40 PM ireps.gov.in/epsn/works/tds/publishLOAWorksLetter.do?Action=ViewPublishedLetter&nitOId=67766682&tdId=1654305&letter…
Antenna&antenna cable will be supplied by the
Railways.
6 Amps MCB single pole of Legrand make or
25 25 80 Numbers 92.00 At Par 7360.00 101.20 Rs/Unit 8096.00
Similar.
26 Telephone Rosette box single line 26 28 Numbers 10.76 At Par 301.28 11.84 Rs/Unit 331.52
27 Telephone line cord 1.5 mtr length 27 28 Metre 12.87 At Par 360.36 14.16 Rs/Unit 396.48
Supply and installation of Audio Amplifier similar
to Ahuja model SSA-250,workable on 230V AC /
28 12VDC supply with protection against wrong 28 7 Numbers 16276.40 At Par 113934.80 17904.00 Rs/Unit 125328.00
battery polarity connections in the control
console,as directed at site.
"Supply and installation of 2-Way Compact PA
29 Wall Speaker similar to Ahuja 2-Way Compact PA 29 7 Numbers 7000.00 At Par 49000.00 7700.00 Rs/Unit 53900.00
Wall Speaker(Model-SMX 602T) "
"Supply and installation of unidirectional speakers
similar to Ahuja model UHC30XT including
30 30 28 Numbers 2065.00 At Par 57820.00 2271.50 Rs/Unit 63602.00
necessary fixtures required for the work and
fixing the same."""
"Supply and fixing of Microphone similar to Ahuja
31 31 7 Numbers 3724.00 At Par 26068.00 4096.50 Rs/Unit 28675.50
model PRO-2200SC DX,as directed at site "
"Supply installation and commissioning of 2 KVA
32 UPS with 2 hours backup including battery 32 7 Numbers 59000.00 At Par 413000.00 64900.00 Rs/Unit 454300.00
extended. "
Supply of sealed maintenance free Battery 12V
33 33 7 Numbers 6387.00 At Par 44709.00 7025.70 Rs/Unit 49179.90
/100AH of Amara raja make or better
screened cable, cotton braided of reputed make,
34 34 700 Metre 38.00 At Par 26600.00 41.80 Rs/Unit 29260.00
suitable for speakers"
Supply of 6 way power supply extension board
35 35 7 Numbers 399.00 At Par 2793.00 439.00 Rs/Unit 3073.00
with surge protection , make Havels or better
Supply of 3 core power cable 2.5sqmm multi
36 36 280 Metre 120.00 At Par 33600.00 132.00 Rs/Unit 36960.00
stranded annealed electrolytic copper conductor
"Supply, installation and commissioning of
Electronic Train Information Announcement
37 37 7 Numbers 66359.00 At Par 464513.00 72995.00 Rs/Unit 510965.00
System as per Technical Specifications mentioned
in Annexure 1 "
Supply of 19 inch 24 U Telecom Rack with
standard accessories (closed type telecom rack)
with front door glass door type, all doors should
be removable type, two exhaust fans, one
38 horizontal tray, one AC multiple (4 No.s of 5 Amps 38 7 Numbers 20326.00 At Par 142282.00 22359.00 Rs/Unit 156513.00
sockets), earthing strip (copper) - 1 with fastener,
2PAC rack mountable DCDB panel with one
common copper strip and four MCB 6 Amps +2
Amps - 16 Amps.
Supply, Installation and commissioning of PCM
TDM Integrated access Device (Make MROTEK)
39 Model-Maple 4C(Should be able to configure 39 14 Numbers 45666.00 At Par 639324.00 50232.00 Rs/Unit 703248.00
2W&4W Channel Comm and should have RJ11
port for Channel comm) or similar
Supply of 10 pair Switch board cable telephone
40 cable 05mm dia,annealed copper conductor PVC 40 700 Numbers 75.00 At Par 52500.00 82.50 Rs/Unit 57750.00
insulated as per IPS TC-24/91
Supply of XA14ET card compatible with TJ1400
41 without any SFPs. Make: Tejas Accepted firm s 41 3 Numbers 70682.00 At Par 212046.00 77750.00 Rs/Unit 233250.00
offer Make: TEJAS NETWORKS
Supply installation of AhujaTwo way counter
42 42 7 Numbers 8645.00 At Par 60515.00 9509.00 Rs/Unit 66563.00
communication system (Ahuja CCS -2300)
"Supply of STP CAT-6 Cable (Shielded Twisted
43 Pair) STP compliant with latest EIA/TIA-568-B2- 43 700 Metre 33.00 At Par 23100.00 36.30 Rs/Unit 25410.00
1."
"Supply and installation/fixing of Wall Mountable
RJ45 Socket and Face Plate with shutter and
44 44 21 Numbers 394.00 At Par 8274.00 433.40 Rs/Unit 9101.40
network module as per details in Technical
document. Inspection Consignee"
"Supply of RJ 45 connector suitable for STP/UTP
45 cable [Detailed Specification inTechnical 45 70 Numbers 3.00 At Par 210.00 3.30 Rs/Unit 231.00
Document] Inspection: Consignee"
"Supply of LAN tester UTP cable tester similar to
46 46 4 Numbers 531.00 At Par 2124.00 584.00 Rs/Unit 2336.00
make of Voltec/D-Link."
Supply of VF Transformer (1120:470/
1120:1120/470 : 470/ 470 : 600 / 1200:600
47 Ohm) as per Specification No. IRS-TC-76/2021 47 28 Numbers 897.00 At Par 25116.00 986.70 Rs/Unit 27627.60
Ver 1.0 (Cylindrical type) or IRS/TC/22/ 2021 Ver
1.1 (Rectangular type) with latest amendment.
"Supply of C series MCB 2 POLE 32 AMP with
48 metal enclosure. Make Schneider, Legrand, L&T, 48 7 Numbers 517.00 At Par 3619.00 569.00 Rs/Unit 3983.00
Havells."
Schedule Totals 8700067.00

Schedule H-Schedule-H (Fire alarm system) (Item Directory - Not Applicable) 6683150.00

Supply,installation,testing and commissioning of

Heat and smoke multi sensor as per
RDSO/SPN/217/2021 ver-3 or latest. along with
1 1 105 Numbers 7500.00 At Par 787500.00 6000.00 Rs/Unit 630000.00
its base, backbox and all accessories in
complaince with IS:2175 and IS:11360 standards
and UnderwritersLaboratory (UL) listed.
Supply,installation,testing and commissioning
2 fault isolator as per RDSO/SPN/217/2021 ver-3 or 2 14 Numbers 6000.00 At Par 84000.00 4800.00 Rs/Unit 67200.00
latest with backbox and all other accessories.
Supply of Analogue LHS cable as per
3 3 1400 Metre 1600.00 At Par 2240000.00 1280.00 Rs/Unit 1792000.00
RDSO/SPN/217/2021 ver-3 or latest

Schedule B1-SCHEDULE-B1 (Item Directory - Not Applicable) 24085562.12

Supply of Hylam sheet resin bonded 10mm thick

1 1 14 Numbers 8000.00 At Par 112000.00 8480.00 Rs/Unit 118720.00
of size 2400mmx1200mm.
2 Supply of Universal Lock. 2 350 Numbers 200.00 At Par 70000.00 212.00 Rs/Unit 74200.00
3 Supply of 200 Way Tag block. 3 7 Numbers 2200.00 At Par 15400.00 2332.00 Rs/Unit 16324.00
Supply of Navtal Godrej make lock 50 mm with 2
4 4 14 Numbers 400.00 At Par 5600.00 424.00 Rs/Unit 5936.00
keys.
Supply of Fuse links 20 A as per RDSO spec
5 5 150 Numbers 45.00 At Par 6750.00 47.70 Rs/Unit 7155.00
IRS.S-78/92 or latest._Knife edge type.
Supply of Fuse links 10 A as per RDSO spec
6 6 180 Numbers 45.00 At Par 8100.00 47.70 Rs/Unit 8586.00
IRS.S-78/92 or latest._Knife edge type.
Supply of Fuse links 6 A as per RDSO spec IRS.S-
7 7 100 Numbers 40.00 At Par 4000.00 42.40 Rs/Unit 4240.00
78/92 or latest._Knife edge type.
Supply of Fuse links 2 A as per RDSO spec IRS.S-
8 8 150 Numbers 45.00 At Par 6750.00 47.70 Rs/Unit 7155.00
78/92 or latest.
Supply of Piezo electric Buzzers 24 V of different
9 tone to be approved by Supervisor incharge of 9 14 Numbers 30.00 At Par 420.00 31.80 Rs/Unit 445.20
work.
10 Supply of HRC fuse holders 32 A with fuse links. 10 150 Numbers 250.00 At Par 37500.00 265.00 Rs/Unit 39750.00
Supply of toolkit for ESM as recommended by
11 CSTE technical instructions consisting of 15 items 11 4 Numbers 20000.00 At Par 80000.00 21200.00 Rs/Unit 84800.00
including tool box.
Supply of Crimping Tool for RJ 45. Make/Details
12 12 2 Numbers 1174.10 At Par 2348.20 1244.45 Rs/Unit 2488.90
are furnished in Technical Specification.
Supply of Cable Route Tracer.Make/Details are
13 13 2 Numbers 175000.00 At Par 350000.00 185500.00 Rs/Unit 371000.00
furnished in Technical Specification.

https://www.ireps.gov.in/epsn/works/tds/publishLOAWorksLetter.do?Action=ViewPublishedLetter&nitOId=67766682&tdId=1654305&letterId=785… 5/22
8/17/23, 5:40 PM ireps.gov.in/epsn/works/tds/publishLOAWorksLetter.do?Action=ViewPublishedLetter&nitOId=67766682&tdId=1654305&letter…
Supply of cable fault locator.Make/Details are
14 14 2 Numbers 165000.00 At Par 330000.00 174900.00 Rs/Unit 349800.00
furnished in Technical Specification.
Supply of OTDR optical time domain reflecto
meter with inbuilt Optical Power meter,VFL &
15 15 1 Numbers 280000.00 At Par 280000.00 286900.00 Rs/Unit 286900.00
Laser Source along with accessories. Make/Details
are furnished in Technical Specification.
Supply of Rodometer (Distance Recorder)
16 Make/Details are furnished in Technical 16 1 Numbers 4000.00 At Par 4000.00 4240.00 Rs/Unit 4240.00
Specification.
Supply of laser based Distance Reader similar to
17 Bosch make Model No.GLM 100c laser range figer 17 2 Numbers 17000.00 At Par 34000.00 18020.00 Rs/Unit 36040.00
or better with blue tooth and all accessories.
Supply of PON Optical power meter with inbuilt
18 Laser source Make/Details are furnished in 18 2 Numbers 20000.00 At Par 40000.00 21200.00 Rs/Unit 42400.00
Technical Specification.
Supply of Cross talk meter of Make/Details are
19 19 2 Numbers 45000.00 At Par 90000.00 47700.00 Rs/Unit 95400.00
furnished in Technical Specification.
Supply of Signal aspects - LED Red with current
regulator for the following types, with necessary
20 20 65 Numbers 8970.00 At Par 583050.00 9508.20 Rs/Unit 618033.00
inspection as per specification
RDSO/SPN/199/2010 revision 1.1 or latest.
Supply of Signal aspects - LED Yellow with current
regulator for the following types, with necessary
21 21 85 Numbers 8059.00 At Par 685015.00 8542.54 Rs/Unit 726115.90
inspection as per specification
RDSO/SPN/199/2010 revision 1.1 or latest
Supply of Signal aspects - LED Green with current
regulator for the following types, with necessary
22 22 65 Numbers 8496.00 At Par 552240.00 9005.76 Rs/Unit 585374.40
inspection as per specification
RDSO/SPN/199/2010 revision 1.1 or latest.
Route-Colour light signal LED signal lighting unit
23 for railway signalling as per RDSO spec 23 85 Numbers 5298.00 At Par 450330.00 5615.88 Rs/Unit 477349.80
RDSO/SPN/153/2011 Rev 4.1 or latest.
CALLING on-Colour light signal LED signal lighting
24 unit for railway signalling as per RDSO spec 24 50 Numbers 6478.00 At Par 323900.00 6866.68 Rs/Unit 343334.00
RDSO/SPN/153/2011 Rev 4.1 or latest.
Shunt-Colour light signal LED signal lighting unit
25 for railway signalling as per RDSO spec 25 50 Numbers 5298.00 At Par 264900.00 5615.88 Rs/Unit 280794.00
RDSO/SPN/153/2011 Rev 4.1 or latest.
"Universal plug in type Q style (ECX-61) AC LED
lamp proving relay with in built current
transformer type, slow release, neutral line relay,
4F/4B front and back metal to carbon contacts
26 suitable for work in series with 110v ac, led signal 26 300 Numbers 5304.00 At Par 1591200.00 5622.24 Rs/Unit 1686672.00
lamp 15w conforming to RDSO spec.,
sts/e/relays/AC Lit LED signal/09/2002 amdt-1,
BRS-941a, IRS.S.34 & IRS.S.23 interlocking code
shall be ABDHK. "
"""Key Lock Checking Relay (KLCR) working on
24V DC, AC Immunized with different ward
combinations and contact configuration 4F/4B
27 with 2 extra ward plates and with case, RDSO 27 16 Numbers 11799.00 At Par 188784.00 12506.95 Rs/Unit 200111.20
spec no. RDSO/SPN/219/2016 ver 1.0 with
amendment or latest, confirming to IRS S-23, S-
34 & S@45<44@ IRS S:46. "
Supply of
commercial/industrialgradeoperatorVDUofsizes55''
28 FullHD,HDMI/DVIconnectivity,inbuilt speaker 28 14 Numbers 400000.00 At Par 5600000.00 424000.00 Rs/Unit 5936000.00
etc(Forthisitem pror approval of engineer in
charge is required inwritten)
Supply of fan less industrial grade embedded PC
(Similar to moxa v2406 or better) with all
29 accessories such as key board, mouse, Antivirus 29 14 Numbers 415000.00 At Par 5810000.00 439900.00 Rs/Unit 6158600.00
etc of industrial grade as per RDSO TAN No.
STS/TAN/3007 Version 1.0 or latest )
Supply of RFID marker locator SML model or
similar, 8000 or more marker records, Built in
30 GPS module,1.5m Depth Range with LCD display 30 1 Numbers 335592.00 At Par 335592.00 355727.52 Rs/Unit 355727.52
Cable marker Locator. Make/Details are furnished
in Technical Specification.
Supply of smart RFID marker, SML 1014 model or
similar- Telephone based Electronic Cable marker
31 2.5 cm dia, minimum 1.5m depth range and with 31 230 Numbers 2195.00 At Par 504850.00 2326.70 Rs/Unit 535141.00
Hexadecimal ID code. Make/Details are furnished
in Technical Specification
Supply of Diado type single lie tokenless Block
32 instrument complete with relays, transmitter, 32 1 Numbers 483943.00 At Par 483943.00 512979.58 Rs/Unit 512979.58
receiver, filtter unit, wooden block countee etc.
33 Supply of Electrical detector 3 slides 33 7 Numbers 18000.00 At Par 126000.00 19080.00 Rs/Unit 133560.00
Supply of WAGO/Pheonix/Elmex terminals
34 suitable for cable dimensions maximum of 2.5 34 1500 Numbers 85.00 At Par 127500.00 90.10 Rs/Unit 135150.00
sq.mm
PVC wire coils of size 10 Sq.mm multi strand each
35 coil of 100 mtrs length as per IRS Spec 35 7 Numbers 9500.00 At Par 66500.00 10070.00 Rs/Unit 70490.00
76/89.Amdt 3 or latest.
Supply of 2-conductor disconnect/test terminal
36 block with pivoting knife disconnect with test port 36 700 Numbers 40.00 At Par 28000.00 42.40 Rs/Unit 29680.00
doe DIN rail 35*15 and 35*2.5sqmm cage clamp
Screwless end stop 6mm wide for DIN rail 35x15
37 37 700 Numbers 10.00 At Par 7000.00 10.60 Rs/Unit 7420.00
and 35*7.5
Supply of end and intermediate plate 2.5mm
38 38 700 Numbers 10.00 At Par 7000.00 10.60 Rs/Unit 7420.00
thick
39 DIN rail 35*15 and 35*7.5 39 700 Metre 60.00 At Par 42000.00 63.60 Rs/Unit 44520.00

Schedule C1-SCHEDULE-C1 (EXECUTION-NON-SOR) (Item Directory - Not Applicable) 3873475.33

"Laying of PLB HDPE duct, 40/33 mm Dia, in the

trenches and in the protective works already
provided including in HDD portion and supply
1 1 27 Kilometre 13000.00 At Par 351000.00 13000.00 Rs/Unit 351000.00
pulling of Nylone rope through it at diffeent places
as per direction of engineerin charge or site
engineer. "
Blowing of OFC cable (24F as per RDSO spec TC-
55-2006 Rev-1 with amendment 1.1) in already
2 laid PLB HDPE duct.40/33 dia by using blowing 2 27 Kilometre 16500.00 At Par 445500.00 16500.00 Rs/Unit 445500.00
machine providing the sufficient loops in
loop/joint chambers and other associated work.
Leading in arrangement for OFC cable inside
service building by providing large G.I. Band at
bottom & vertical G.I Pipe of 75 mm dia. The
3 vertical pipe shall be taken 75 mm above the 3 7 Job 2000.00 At Par 14000.00 2000.00 Rs/Unit 14000.00
floor level & the mouth of the pipe shall be
covered by Plastic Cap. The floor shall be restored
to the original condition.
Fixing of 6 way PBT terminal blocks and
Per
4 termination of cable on each temrinal. Payment 4 20000 45.00 At Par 900000.00 45.00 Rs/Unit 900000.00
Conductor
will be done per no.of cable terminations
Installation ,wiring , testing and commissioning of
data logger 512 digital & 32 anolog inputs. This
includes installation, wiring, testing,
commissioning and networking with existing
NMDL system at test room inclding necessary
5 modification in the database, complete along with 5 7 Numbers 28000.00 At Par 196000.00 28000.00 Rs/Unit 196000.00
contractor own material. This also includes
programming of data logger for fault diagnostic in
suitable structured language in consultation with
railway. Required potentional free contacts will be
provided in the Relay rooms
Carefully opening the bunching inside the relay
room as instructed, removing the relay pin along
with the wire, neatly and carefully removing the
6 6 70 Numbers 16.00 At Par 1120.00 16.00 Rs/Unit 1120.00
wire duly testing with buzzer, re-bunching &
placing with modi nylon/twine threas and PVC
dotted with buttons where required.
Digging of cable trench to a depth of not less than
30cm in rocky terrain, concreting the trench with
7 7 2000 Metre 380.00 At Par 760000.00 380.00 Rs/Unit 760000.00
150mm thick concrete in the ratio 1:2:4 and after
proper curing ,back filling with excavated soil.
Video recording of cable trench using
minimum720P and above HD camera and submit
8 one copy in New removable hard disks (With 8 27 Kilometre 3500.00 At Par 94500.00 3500.00 Rs/Unit 94500.00
capacity as per requirement); Two copies in DVD-
R
9 "Installation, wiring, testing and commissioning of 9 7 Numbers 49666.19 At Par 347663.33 49666.19 Rs/Unit 347663.33
Diesel Generator Set 5 KVA, Single Phase, 240V,
1500 RPM, 50 Hz, 8 BHP (minimum) mounted
with air cooled double cylinder diesel engine with
acoustic enclosure complete silent type DG sets
confirming to RDSO Specn.No.IRS:S-69/86 or
latest (CPCB Noise & Emission Complaint)
Kirloskar make engine/alternator. This also

https://www.ireps.gov.in/epsn/works/tds/publishLOAWorksLetter.do?Action=ViewPublishedLetter&nitOId=67766682&tdId=1654305&letterId=785… 7/22
8/17/23, 5:40 PM ireps.gov.in/epsn/works/tds/publishLOAWorksLetter.do?Action=ViewPublishedLetter&nitOId=67766682&tdId=1654305&letter…
includes supply of standard AMF control panel,
supply of 12V/80 AH battery set along with
battery charger of suitable rating for charging the
batteries to ensure self starting arrangement of
DG sets. It also includes supply of start/stop
buttons,volt/Ampere/Frequency meters and 63
AMP MCB. Note: DG set will be procured from
OEM or authorized dealer of OEM's with the
warranty certificate of minimum 1 year. All
masonry work required for installation of DG set
will be done by contractor under supervision/
instructions issued by site engineer incharge. "
Cable armours soldering and earthing as
10 10 3000 Numbers 40.00 At Par 120000.00 40.00 Rs/Unit 120000.00
instructed by incharge SSE/JE at site.
"Cable Route Tracing service using Radiodetection
make Advanced Cable & Pipe Locator equipment
with GPS coordinates logging facility) - Equipment
model to be used for the Cable route tracing
11 11 14 Day 25978.00 At Par 363692.00 25978.00 Rs/Unit 363692.00
service RD8100 PDLG or RD8200G - Report in the
form of CSV/KML file(soft copy) to be submitted
to Customer within 15 days from the date of work
completion at site"
Provision of Lighting arrangement for NI working
12 12 7 Set 40000.00 At Par 280000.00 40000.00 Rs/Unit 280000.00
at both side Goomty and Point locations.
Schedule Totals 3873475.33
Schedule D1-SUCHEDULE-D1 (SUPPLY & INSTALLATION NON-SOR) (Item Directory -
30178678.00
Not Applicable)
Supply, installation , testing and commissioing of
SSBPAC (Digital) for single line as per RDSO spec
1 RDSO/SPN/175/2005 ver-1or latest with Auto 1 7 Set 1460000.00 At Par 10220000.00 1489200.00 Rs/Unit 10424400.00
changeover facility and as per technical
specification with RDSO inspection.
Supply, installation testing and commissioing of
integrated power supply (IPS) system SMPS
based up to 6 lines in RE area confirming to
RDSO specification no. RDSO/SPN/165/2012
version 3.0 with latest amendment and
configuration as enclosed annexure-i & ii, list of
spares enclosed annexure-iv. including power
2 2 7 Set 1407380.00 At Par 9851660.00 1435527.60 Rs/Unit 10048693.20
supply module for axle counter (BPAC), data
logger and with ei module. IPS should be supplied
with 60 nos of 2v-200AH LMLA battery, along with
16 sq.mm cable for IPS battery 20 mtrs, ASM
panel : 50 mtrs and data logger 50 mtrs required,
firm will commission the same with minimum one
month prior notice period.
Supply, Installtion and commisioing of class-A
protection with lightening event counter as per
3 RDSO spec No.RDSO/SPN/17/2008 and as per 3 7 Numbers 400000.00 At Par 2800000.00 408000.00 Rs/Unit 2856000.00
details given in technical specification with three
year warranty.
Supply and Laying of PVC Warning Tape colour
Orange, width of 250mm (10") by printing with
4 4 35 Kilometre 42600.00 At Par 1491000.00 43452.00 Rs/Unit 1520820.00
black letters 'Indian Railway Signal/Telecom/OFC
Cable' on both sides
Supply, Fabrication, Installation and Fixing of
Panel Operator Console in SM Room with
arrangements to fix 2 No. VDUs, SM Key Cum
Counter Box, Axle Counter Reset Boxes, etc. The
Basic Frame Structure of the console to be made
of Teak Wood and Water Proof Plywood Sheet of
19mm thickness of reputed make to be used for
fabrication of table duly consisting of required
partitions/compartments for accomodating
associated necessary equipments/terminations.
Interior and Exterior to be covered using
5 5 8 Set 335000.00 At Par 2680000.00 341700.00 Rs/Unit 2733600.00
Laminated sheet of reputed make and approved
colors. All the materials required for the
fabrication and fixing of console to be supplied by
contractor including Lead, Lift and Man-power.
Work need to be carried out as per the tentative
drawing enclosed and the instruction of site
engineer. This item also includes supply of Godrej
C13 or better make/model Computer Table (1
No.) for installation of Maintenance VDU and
Godrej Office Executive Chair or better make (2
No.s).
Supply & installation of Master Telephone Unit
with voice logging facility for Electronic LC Gate
6 6 3 Numbers 43104.00 At Par 129312.00 43966.08 Rs/Unit 131898.24
Telephone System as per Specification No. RDSO
/SPN/TC/51/2011 Rev 1.0 or latest.
Supply & installation of Gate Telephone (Slave
Telephones) for Electronic LC Gate Telephone
7 7 6 Numbers 4772.00 At Par 28632.00 4867.44 Rs/Unit 29204.64
System as per Specification No. RDSO
/SPN/TC/51/2011 Rev 1.0 or latest.
Supply and provision of teak wood cable clamp
8 base plank with support plank of suitable for full 8 175 Numbers 1600.00 At Par 280000.00 1632.00 Rs/Unit 285600.00
location box
Supply and provision of teak wood cable clamp
9 base plank with support plank of suitable for Half 9 100 Numbers 800.00 At Par 80000.00 816.00 Rs/Unit 81600.00
location box
10 "Supply and Installation of ON UNE GROUNDING 10 7 Set 54000.00 At Par 378000.00 55080.00 Rs/Unit 385560.00
RESISTANCE MONITORING SYSTEM { WI11l
FQUOWING FEATURF,S ) : Split Core Structure,

https://www.ireps.gov.in/epsn/works/tds/publishLOAWorksLetter.do?Action=ViewPublishedLetter&nitOId=67766682&tdId=1654305&letterId=785… 8/22
8/17/23, 5:40 PM ireps.gov.in/epsn/works/tds/publishLOAWorksLetter.do?Action=ViewPublishedLetter&nitOId=67766682&tdId=1654305&letter…
Non Contact Measurement, Real In-Time Testing;
High Accuracy; High Stability ;Resistance Range
0.010 1000; Resolution 0.001 O; Accuracy
±2%rdg±3dgt ;Working Temp. & Humidity-20°C
55°C; 20%RH 90%RH; Detector Light and Sound
Alarm ; IP-54 protection ; RS-485
Communication, with extended 4 digit LCD.
Display can be mounted up to 2 Mtr distance from
detector unit. (Suitable for Transmission Line/
Railway facilities/Communication/Sub
Station/Electrical equipment Grounding. Consists
of : (a) Main detector Unit-1 No. (b) LCD
Enclosure fitted with Aviation Plugs-1.11 No. (c)
Set of Detector to LCD enclosure connecting two
cables each 2 mtr. length fitted with Aviation
connector-01 Set (Inspection by Consignee)"
"Provision of Earth connection to Location Boxes
and Signals with MS Flat as per
11 Drg.No.RVNL/S&T/SC-07/2016:" a) Supply of MS 11 1000 RMT 150.00 At Par 150000.00 153.00 Rs/Unit 153000.00
Flat of size 40x6mm at site which includes
loading, unloading,transportation and fixing.
"Provision of Earth connection to Location Boxes
and Signals with MS Flat as per
12 Drg.No.RVNL/S&T/SC-07/2016:" "b) Supply of GI 12 850 Set 28.00 At Par 23800.00 28.56 Rs/Unit 24276.00
bolt of size M20x40mm with Two Nuts along with
two plain washers and one spring washer "
"Provision of Earth connection to Location Boxes
and Signals with MS Flat as per
13 Drg.No.RVNL/S&T/SC-07/2016:" "c) Supply of GI 13 450 Set 15.00 At Par 6750.00 15.30 Rs/Unit 6885.00
bolt of size N12x25mm with two Nuts along with
two plain washers and one spring washer. "
"Provision of Earth connection to Location Boxes
and Signals with MS Flat as per
14 14 350 Numbers 16.00 At Par 5600.00 16.32 Rs/Unit 5712.00
Drg.No.RVNL/S&T/SC-07/2016:" "d) Drilling of
holes in MS Flat of different sizes at site. "
"Provision of Earth connection to Location Boxes
and Signals with MS Flat as per
15 Drg.No.RVNL/S&T/SC-07/2016:" "e) Cutting, 15 1000 Numbers 22.00 At Par 22000.00 22.44 Rs/Unit 22440.00
bending and twisting of MS Flat duly heating at
site. "
"f} Painting of MS Flat with one coating of red
16 oxide as primary and two coats of anti- corrosive 16 850 RMT 16.00 At Par 13600.00 16.32 Rs/Unit 13872.00
black. "
supply and provision of Modular power supply
arrangements for operator/Maintenance VDU
PC,MT PC and embedded PC. This consists of i)
17 110V DC/110V AC 500VA inverter.-2Nos ii) 17 14 Set 144166.00 At Par 2018324.00 147049.32 Rs/Unit 2058690.48
110VDC/24V DC 10A-2 Nos Gallant make or
better (This includes suitable enclosures/Fixture
as per site requirement
Schedule Totals 30782251.56
Schedule E1-(ELECTRONIC INTERLOCING-INSTALLATION) (Item Directory - Not
6714659.00 30.00 % Above 8729056.70
Applicable)
Installation, Wiring, testing, Soldering of all EI
equipments, earthing of EI Equipment, Relay
1 Racks and Power Equipment etc. including supply 1 7 Per Unit 633807.00 At Par 4436649.00
power cable and Documents/Manuals etc. (Per
unit= per EI)
2 Commissioning of Electronic Interlocking system 2 7 Numbers 24619.00 At Par 172333.00
Design and Drawing for complete indoor
3 signalling work for new PI/EI/RRI station(Per 3 8 Per Unit 243671.00 At Par 1949368.00
unit= per PI/RRI/EI)
Design and development of indoor drawings for
4 4 1 Station 97693.00 At Par 97693.00
PHASE WORKING
Complete Indoor work of installation, wiring and
5 5 1 Station 58616.00 At Par 58616.00
commissioning - for PHASE WORKING.
Schedule Totals 8729056.70
Schedule E2-E2 (CHECKING & VERIFICATION OF INTERFACE CIRCUIT/APPLICATION
680500.00
LOGIC CIRCUIT) (Item Directory - Not Applicable)
Indpendent checking and verification of Interface
1 circuits for stations having up to 25 Routes by 1 7 Station 65000.00 At Par 455000.00 68575.00 Rs/Unit 480025.00
IRSE/IRSTELO License Holders
Indpendent checking and verification of
2 application logic circuits for stations having up to 2 7 Station 13500.00 At Par 94500.00 14242.50 Rs/Unit 99697.50
25 Routes by IRSE/IRSTELO License Holders
Additional payment for checking and verification
3 of interface circuits/Logic circuits haing more that 3 20 Per Route 6550.00 At Par 131000.00 6910.25 Rs/Unit 138205.00
routes by IRSE/IRSTELO License Holders.
Schedule Totals 717927.50
Total Value 266074266.54 289738314.14
Rebate on Total Value (%) 0.00
Net Bid Value 289738314.14

Item Breakup
Schedule A-Schedule-A

Item - 1 SCHEDULE-A

S No. Item No Description of Item Unit Qty Rate Amount

Excavation of cable trench in all kinds of soil except hard rocky

areas including clearing of roots of trees, rocks, bushes etc. to a
1 101010 Metre 27000 34.65 935550.00
depth of 1.0 Mtrs and to a width of 0.3 Mtrs. Laying of cables is
not included in this schedule.

Excavation of cable trench in all kinds of soil except hard rocky

areas including clearing of roots of trees, rocks, bushes etc. to a
2 101020 Metre 10500 42.98 451290.00
depth of 1.0 Mtrs and to a width of 0.5 Mtrs. Laying of cables is
not included in this schedule.

Removing/breaking of existing RCC slabs on the Passenger

Platform, trenching to a depth of 0.6m to accommodate the
additional cables, replacing the slabs removed after the cables
are laid and replastering with cement mortar, refilling the trench
3 101040 by ramming and consolidating it as per the instructions of Metre 250 169.95 42487.50
Railway Representatives at site. (Laying of cables is not included
in this schedule). [Cement, river sand and all other miscellaneous
materials required for the work shall be supplied by the
Contractor].

Excavation of trench to a depth of 1 Mtr. for track crossing of

cables, laying of DWC/ RCC pipes with collar/coupling, refilling of
trench by ramming and consolidating it as per the instructions of
Railway representative at site. During excavation of trench it has
4 101060 to be ensured that the excavated soil does not mix with the Metre 350 208.35 72922.50
ballast available. The depth of 1m trench shall be from the
bottom of sleepers for track crossings. Laying of cables is not
included in this schedule. (Supply of DWC/RCC pipes with
couplers/ collars is not included in this schedule)

Excavation of trench to a depth of 1 Mtr. for road crossing of

cables, laying of DWC/ RCC pipes with collar/ coupling, refilling of
trench by ramming and consolidating it and resurfacing it to the
5 101070 Metre 70 270.83 18958.10
original position. Laying of cables is not included in this schedule.
(Supply of DWC/RCC pipes with couplers/ collars is not included
in this schedule).

Provision of GI pipes (50/100mm dia) for cable laying with offset

at both ends and with couplings over RCC Bridges/ Drainage/
Culverts with concrete masonry supports of size 300mm x 300
mm x 300 mm at an interval of 2m. The ends of the pipes shall
be closed with brick masonry abutments work so that no cable is
6 101080 exposed, The work shall be carried out as per the instructions of Metre 800 181.95 145560.00
Railway representative at site. (Supply of GI pipes with couplings
and laying of cables is not included in this schedule). [Stone jelly
of size 20/25mm, bricks, sand, cement and all other
miscellaneous materials required for the work shall be supplied
by the Contractor].

Provision of GI pipes-(50/100mm dia) for cable laying with offset

at both ends and with couplings over girder bridges by fixing on
suitable MS Clamps at an interval of 2 Mtrs. The ends of the
pipes shall be closed with brick masonry abutments work so that
no cable is exposed, The work shall be carried out as per the
7 101090 instructions of Railway representative at site. (Supply of GI pipes Metre 450 215.25 96862.50
with couplings and laying of cables is not included in this
schedule). [MS angles, flats, bolts and nuts for manufacturing
fixing clamps, bricks, river sand , cement and all other
miscellaneous required for the work shall be supplied by the
Contractor].

Provision of GI pipes (50/100mm dia) for cable laying in hard

rocky area with off sets at both ends duly supported by concrete
blocks of size 300mm x 300 mm x 300 mm at an interval of 2m.
The ends of the pipes shall be closed with brick masonry
abutments work so that no cable is exposed, The work shall be
8 101100 Metre 450 168.08 75636.00
carried out as per the instructions of Railway representative at
site. (Supply of GI pipes with couplings and laying of cables is not
included in this schedule). [Stone jelly of size 20/25mm, bricks,
sand, cement and all other miscellaneous materials required for
the work shall be supplied by the Contractor].

Laying of signaling/power/telecommunication cables as per cable

9 101110 plan in cable trenches, masonry ducts, RCC Pipes, DWC pipes, GI Metre 234000 9.83 2300220.00
Pipes etc. (Supply of cables is not included in this schedule).

Refilling of cable trench 1m depth by 0.3m width throughout,

10 101150 with earth after laying of cables, and consolidating the trench by Metre 27000 8.33 224910.00
ramming and leveling.

Refilling of cable trench 1m depth by 0.5m width throughout,

11 101160 with earth after laying of cables, and consolidating the trench by Metre 10500 10.43 109515.00
ramming and leveling.

Supply of RCC cable markers as per drawing No.CSTE/CN/OFC/1.

12 101180 The lettering on the cable marker shall be "SIG" / "TELE" / "OFC" Numbers 1700 166.29 282693.00
as per the instructions of Railway representative at site.

Digging of pit to a depth of 800mm of size 300mmX300mm,

casting of concrete foundation of size 300mmX300mmX300mm
and Placing of RCC cable markers on top of the foundation and
13 101190 refilling the pit and consolidating it by ramming. The cable Numbers 1700 121.43 206431.00
markers shall be provided at an interval of 20 Mtrs. within station
limits and 50 Mtrs. outside station limits throughout the cable
route, diversions and also at every track/road crossing.

14 101200 Excavation of cable coil pit to a size of 1.5mx1.5m and depth as cum 210 513.00 107730.00
instructed by Railway representative at site, for coiling the cables
in rear of relay rooms/ AFTC huts, apparatus cases etc. The work
includes coiling the underground cables, and placing closely one
layer of country bricks of size approx. 220mm x 100mm x 60mm

Supply of Double walled corrugated pipe - 103.5mm inner dia &

120mm outer dia conforming to specification No. IS 14930(Part
15 101210 Metre 1500 263.20 394800.00
2): 2001 with one coupler for every 6m of pipe as specified in
Vol.II of the Tender document.

Supply of GI pipes - 50mm dia -3.65mm thick as specified in

16 101220 Metre 220 343.20 75504.00
Vol.II of the Tender document.

Supply of GI pipes - 100mm dia-4.5mm thick as specified in

17 101230 Metre 850 838.80 712980.00
Vol.II of the Tender document

Supply of GI pipes - 150mm dia-4.8mm thick as specified in

18 101240 Metre 630 1273.50 802305.00
Vol.II of the Tender document

Excavation of pit, casting concrete foundation and erection of

apparatus case full size as per Drg. No.SG/CN/02/6 and fixing of
2 Nos. of 'E' type locks, one for the front door and another for
the back door, fixing of one hard wood shelf plank 37mm thick
and painting the apparatus case inside and outside with one coat
19 102010 of red-oxide and two coats of aluminium paints. (Supply of Numbers 140 9875.30 1382542.00
apparatus case is not included in this schedule). [Foundation
bolts & nuts, 'E' type locks, cement, river sand, stone jelly of size
20/25 mm, hardwood plank of 37mm thick, paints, varnish,
fixing bolts & nuts and all other miscellaneous materials required
for the work shall be supplied by the Contractor.]

Excavation of pit, casting concrete foundation and erection of

apparatus case half size as per Drg, No.SG/CN/02/7, fixing one
'E' type lock for the front door and latching arrangement for the
back door, and fixing of one hardwood shelf plank 37mm thick
and painting the apparatus case inside and outside with one coat
of red-oxide and two coats of aluminium paints. (Supply of
20 102020 Numbers 60 6966.60 417996.00
apparatus case is not included in this schedule). [Foundation
bolts and nuts, cement, 'E' type locks, river sand, stone jelly of
size 20/25mm, 37mm hard wood planks, latching arrangements,
paints, varnish, fixing bolts & nuts and all other miscellaneous
materials required for the work shall be supplied by the
Contractor]

Excavation of pit, erection of cable termination boxes on rails and

concreting as per Drg. No.SG/CN/02/8, drilling of suitable holes
in the box, fixing of 2 Nos. of GI pipes 32mm dia and 300mm
long at the bottom with clamp nuts - 12 mm thick, one at the
inner side and another at the outer side for each pipe for cable
entry and one GI pipe 150mm long 32mm dia for drawal of
jumper wires for Point machines etc., fixing of hardwood plank
37mm thick on the bottom, provision of one EWS lock, and
painting the boxes inside and outside with one coat of red-oxide
21 102050 Numbers 35 3411.00 119385.00
and two coats of aluminium paints. (Supply of CT boxes is not
covered in this schedule. Rails of different length shall be
supplied by Railways. The contractor shall cut lengthy rails
wherever required.) [Cement, river sand, stone jelly of size
20/25mm, paint, varnish , GI Pipes 32mm dia - 300mm long - 2
Nos and 150mm long - 1 No., clamp nuts - 12mm thick - 2 Nos.
for each pipe, fixing bolts and nuts with washers, EWS locks,
paints and all other miscellaneous materials shall be supplied by
the Contractor].

Excavation of pit in and around the existing location boxes very

carefully without damaging the working cables and shifting and
turning the location boxes to clear of the infringement as
instructed by the Railway representative at site. The work
includes ensuring the safety of the signaling system, releasing
the cable coils to give access for shifting/turning the location
boxes. Necessary masonry work and earth work in and around
the location boxes to the required level shall be done as
instructed by the Railway representative at site. If the existing
earth connections to the location boxes are disturbed, the earth
wires shall be properly re-connected. [All materials required for
the work shall be supplied by the Contractor].

22 102081 Shifting of apparatus case (full) Numbers 1 2895.00 2895.00

23 102082 Shifting of apparatus case (half) Numbers 1 1916.25 1916.25

Termination of new main/tail cables on the existing terminals/

fuse blocks in apparatus cases/ battery boxes/ CT boxes/ cable
termination racks as per approved circuit diagram. The terminal
particulars are to be repainted /corrected on the doors of
apparatus cases/ battery boxes/ cable termination boxes and
FTOT index board as instructed by Railway representative at site.
24 102090 This work includes closing the opening created for entry of new Per Unit 20 39.78 795.60
cables in the apparatus cases with masonry brick work and
sealing the bottom of the apparatus cases/ cable termination
racks with cable compound. [Paints, wire PVC 3/0.75mm and
16/0.2mm copper, sealing compound, bricks, cement, river sand
and all other required miscellaneous materials shall be supplied
by the contractor]. {Unit: Per Terminal Block}

Termination of main, tail, Signaling and power cables and internal

wiring on terminal/ fuse blocks in new apparatus cases, cable
termination boxes and in gate Lodges excluding cable termination
rack at relay room. The work includes fixing of all new cables by
teakwood clamp on teakwood base plank, fixing of Phynolic
synthetic industrial fibre base fine weave cotton fibre board 6mm
thick for terminal board to suit each apparatus case, varnishing

Termination on 25/60mm PBT terminals (new location)(Phynolic

25 102101 Per Unit 7000 93.16 652120.00
sheet) {Unit: Per Terminal Block}

Termination on PBT fuse block (new location) (Phynolic sheet)

26 102102 Per Unit 400 113.56 45424.00
{Unit: Per Fuse Block}

Termination of main, tail, Signaling and power cables and internal

wiring by fixing additional terminals/ fuse blocks on the existing
terminal boards of apparatus cases, cable termination boxes etc.
The work includes fixing of all new cables by teakwood clamp on
teakwood base plank, varnishing all teakwood items, fixing of
terminals/ fuse blocks, on the existing terminal boards, drilling of
necessary holes, termination of cables, wiring, identification of
cables using aluminium tags with letters punched neatly, as per
approved circuit diagram and cable plan, painting of particulars
on sleeves and also on the inner side of the doors of apparatus
cases. After terminations are over, the side openings of apparatus
case foundation shall be closed with brick work, cement
plastered, the inter-space filled with river sand up to base level
and the bottom surface shall be sealed with sealing compound.
(Supply of PBT terminals and Fuse blocks is not covered in this
schedule). [Cement, teakwood cable clamp 50mm x 50mm, base
planks 100mm x 25mm, PVC/Nylon sleeves, varnish, paints,
bolts, nuts and washers, Non-deteriorating type of fuses of
various capacities, Aluminium cable tags, sealing compound,
country bricks 220mm x 100mm x 60mm, copper bus bars, brass
screw, river sand, wire PVC3/0.75mm copper and other
miscellaneous materials shall be supplied by the Contractor].

Termination of cables on 25/60mm PBT terminals (existing

27 102111 Per Unit 20 81.68 1633.60
location) {Unit: Per Terminal Block}

Termination of cables on PBT fuse block (existing location) {Unit:

28 102112 Per Unit 20 102.08 2041.60
Per Fuse Block}

Manufacture and supply of M.S. relay frames of suitable size to

hold up to 4/ 8/ 12/ 20 relays /plug in type HMU as required by
Railways and fixing them in apparatus cases for all types of signal
control circuits, LC gate control circuit and Point control circuits,
fixing of plug boards, relays, resistors and electrolytic condensers
on Phynolic synthetic industrial fibre base fine weave cotton fibre
sheet - 6mm thick to IS specification 2036 - 1995 - Type F5,
wiring and termination as per approved circuit diagram and
painting the particulars. (Supply of all types of relays, plug
boards, connectors, retaining clips and plug in type HMU is not
covered in this schedule). [Wire PVC copper, 3/0.75mm and
16/0.2mm copper, Phynolic synthetic industrial fibre base fine
weave cotton fibre sheet - 6mm thick to IS specification 2036 -
1995 - Type F5, for fixing resistors and condensers, MS flats
25mm x 6mm brass bolts and nuts, paints, soldering materials,
resistors, condensers and all other miscellaneous materials
required for the work shall be supplied by the contractor].

Wiring of Signal/ point/ LC control circuit (up to 4 relays/Plug in

29 102121 Set 80 2673.25 213860.00
type HMU)

Wiring of Signal/ Point/ LC control circuit (up to 8 relays/plug in

30 102122 Set 2 4739.60 9479.20
type HMU)

Painting of existing apparatus cases without disturbing the

terminations and equipments inside. The work involves scraping
of old paint, applying one coat of Red oxide and two coats of
Aluminium paint on the inside and outside the apparatus cases,
and painting of termination and equipment particulars on the
doors of the apparatus cases, as instructed by Railway
representative at site. [Aluminium paint, red-oxide and all other
miscellaneous materials required for the work shall be supplied
by the Contractor].

31 102131 Painting of existing apparatus case - Full size Numbers 1 1278.75 1278.75

32 102132 Painting of existing apparatus case - Half size Numbers 1 1223.25 1223.25

33 102150 Painting of existing colour light Signals as per standard practice. Numbers 1 1320.00 1320.00
The work involves scraping of old paint, applying one coat of Red
oxide and two coats of Aluminium/ enamel paint on the Signals -
complete as instructed by Railway representative at site.
[Aluminium paint, red-oxide and all other miscellaneous

Alterations to painted termination/ wiring particulars of functions

in the existing apparatus cases, cable termination boxes, etc., on
the PVC/ nylon sleeves and painting of new nomenclature on the
existing signaling gadgets. This work includes carrying out
alterations of particulars on the inner side of the doors of
apparatus cases, re-numbering of apparatus cases and cable
termination boxes. [Paints and all other miscellaneous materials
required for the work shall be supplied by the Contractor].

34 102161 Alteration to painting particulars (apparatus case - Full size) Numbers 1 884.85 884.85

35 102162 Alteration to painting particulars (apparatus case - half size) Numbers 1 464.10 464.10

Excavation of pit, casting concrete foundation as per

Drg.No.SG/CN/02/9 using metallic templates, for erection of
colour light signals up to 4 aspects. [Foundation bolts, cement,
36 102180 Numbers 70 5008.20 350574.00
river sand, stone jelly of size 20/25mm dia and all other
miscellaneous materials required for the work shall be supplied
by the Contractor].

Erection of surface base, signal pole, mounting of colour light

signal up to 4 aspects complete on Signal pole/ Off-set bracket,
(for LED/ filament bulbs) with lenses, triple pole lamp holder,
filament switching units, CLS transformer, current regulators
(whichever is applicable), fixing of ladder with platform complete
and concreting of ladder shoe, fixing of number plates, marker
board, lens guard, fixing of speed limit board wherever
necessary, termination of tail cables, wiring of signal unit with
PVC wire 3/0.75mm copper, provision of EWS locks, and painting
of one coat of red oxide and two coats of aluminium/ enamel
paints. When the aspect is fixed on Offset bracket using 'U' bolts
37 102190 and nuts, a through bolt shall be provided by drilling a hole in the Numbers 70 5501.20 385084.00
signal pole to prevent the offset bracket from sliding down.
(Supply of surface base, Offset bracket, CLS pole, CLS aspects
complete, ladder with shoes and platform, Speed limit board, LED
aspects, current regulators, lamp holders, lamps, filament
switching unit and CLS transformer is not covered in this
schedule). ['U' bolts and nuts, through bolts and nuts, cement,
stone jelly 20/25mm dia, river sand, Signal Collar Rings, wire
PVC 3/0.75mm copper, lens-guard, all fixing bolts and nuts, lead
wool, paints PVC/Nylon sleeves, enameled number plates.
enameled marker boards, EWS locks, and all other miscellaneous
materials for the work shall be supplied by the Contractor].

Excavation of pit and casting concrete foundation as per Drg,

No.SG/CN/02/10 using metallic templates, for erection of ground
type colour light shunt signal. [Foundation bolts and nuts,
38 102200 Numbers 14 2518.55 35259.70
cement, river sand, stone jelly of size 20/25mm and all other
miscellaneous materials for the work shall be supplied by the
Contractor].

Erection of Ground type shunt signal complete including surface

base, signal pole, LED aspects/ lenses, bulbs with holders
(whichever is applicable), fixing of lens guards, number plate,
termination of tail cables, wiring of signal unit with PVC wire
3/0.75mm copper, provision of EWS locks and painting of one
coat of red oxide and two coats of Aluminium/ enamel paint.
39 102210 Numbers 14 2097.00 29358.00
(Supply of Ground type shunt signal complete including surface
base, signal pole, LED aspects, holder, bulbs, and lenses is not
covered in this schedule). [Wire PVC 3/0.75mm copper, lens
guards, EWS locks, Enameled number plates, bolts and nuts, lead
wool, paints and all other miscellaneous materials shall be
supplied by the Contractor].

Fixing of junction type route indicators - 1 way to 6 ways -

complete/ fixing of additional limb to the existing route
indicators, termination of tail cables, wiring as per approved
circuits diagram using wire PVC 3/0.75mm copper, provision of
required No of EWS locks, wire mesh, and painting. (Supply of
junction type Route Indicators - complete and additional limb is
not covered in this schedule). [3/0.75mm wire PVC, fixing bolts
and nuts, EWS locks, wire mesh, PVC/Nylon sleeves, paints and
all other miscellaneous materials shall be supplied by the
Contractor].

40 102241 Fixing and wiring of direction type route indicator - 1 way Numbers 14 1539.75 21556.50

Fixing of Offset brackets using 'U' bolts and nuts, erection of

Calling On Signals/ 'A' marker lights, termination of tail cables
and wiring using wire PVC 3/0.75mm copper, provision of EWS
lock, number plates/ marker boards and painting. The work also
includes drilling suitable holes on the CLS post and provision of a
through bolt with nut to prevent the Offset bracket from slipping
41 102250 Numbers 60 1427.25 85635.00
down. (Supply of Calling On Signal/ 'A' marker light, LED
aspects/holders & bulbs and Off set brackets is not covered in
this schedule). ['U' bolts and nuts, through bolts with nut, wire
PVC 3/0.75mm copper, EWS lock, Enameled number plates, wire
mesh, PVC/Nylon sleeves, paints and all other miscellaneous
materials shall be supplied by the contractor].

42 102260 Releasing of existing tail cables and drawal of new tail cables for Per Unit 35 824.25 28848.75
colour light signals up to four aspects with or without route
indicator, post type shunt signal and Calling on signals,
termination of new tail cables and wiring using wire PVC
3/0.75mm copper. This work includes drawal of new tail cables
into the signal post duly releasing the existing tail cables from
the relevant signals and re-surfacing the earth excavated as

Excavation of pit in and around the existing signals very carefully

without causing damage to the working cables and shifting the
Signals along with the concrete foundations for approximately 1m
to a nearby position so as to clear the infringement from the
nearest track centre as instructed by Railway representative at
43 102270 Numbers 1 2591.25 2591.25
site. The existing cable coils shall be released carefully so as to
give access for shifting. Necessary masonry work and earth work
shall be carried out in and around the signals after shifting as
instructed by Railway representative at site. [All materials
required for the work shall be supplied by the Contractor].

Removal of existing CLS units, fixing of new CLS units with LED
aspects/ lamps, holders etc., up to four aspects, directly or using
off set brackets duly drilling holes on the signal poles, provision
of EWS locks wherever necessary, termination of tail cables and
wiring using wire PVC3/0.75mm copper and painting of aspect.
44 102280 The new tail cables shall be taken through the signal poles and Numbers 1 5999.25 5999.25
the unwanted cables duly released. (Supply of CLS unit with LED
aspects/ lamps holders, CLS transformers is not included in this
schedule.) [EWS locks, Wire PVC 3/0.75mm copper lenses guard,
wire netting arrangements, paints and all other miscellaneous
materials shall be supplied by the Contractor].

Supply and provision of Screening arrangement for Signals in RE

area as per standard practice. The work comprises of providing
MS angle frame and wire mesh in order to avoid close proximity
of OHE wires. The work also includes provision of earthing wire
45 102300 Numbers 7 1016.60 7116.20
using 4 SWG GI wires from the screening arrangement up to
surface base as per the instructions of Railway representative at
site. [All materials required for this work shall be supplied by the
Contractor].

Provision of earth electrodes as per drawing No.SG/SN/02/13 and

earthing of metallic sheath and armour of all cables in all
apparatus cases, relay room, equipment room, ASM room for
block and control, and earthing of all equipments in apparatus
cases, power room, relay rack, cable termination rack, control
panel, signals, lever frames with MS flat 35mm X 6mm/19c cable
(MS flat for closer by areas and MS flat/19c cable combination for
46 102340 Numbers 250 1799.00 449750.00
farther areas) as per the instructions of Railway representative at
site. The work includes painting of earth resistance value on the
earth pit. (Supply of 19C cable is not covered in the scope of this
schedule). [MS flat for earthing 35mm X 6mm, cement, GI earth
electrodes, common salt, charcoal, country bricks, river sand,
soldering materials and all other miscellaneous materials required
for the work shall be supplied by the Contractor].

Installation of combined type point machine - IRS type and

connecting all ground connections including wiring and
termination in point machine and interconnections between point
machine and CT box through PVC hose pipe with 3/0.75mm and
7/1.40mm copper wire and painting. This work includes provision
of insulation to stretcher bars, throw bar lug and "D" bracket
wherever required, cutting of notches on the point machines
47 102360 covers to suit crank handle configuration. (Combined type point Numbers 30 8856.15 265684.50
machine with ground connection, uninsulated stretcher bar, throw
bar lug and 'D' brackets will be supplied by Railways. [All types of
insulations connected to point work, coal bengal, all type of bolts
and nuts, washers spring/flat wire PVC 7/1.4mm copper, PVC
hope pipe, paints, PVC/nylon sleeves and all other miscellaneous
materials required for the work shall be supplied by the
Contractor].

Supply of Colour light Signal pole 140mm dia, 4.6m/ 3.6m tall
with necessary inspection as per specification/ drawing/
description enclosed in this document.

48 102381 Supply of colour light Signal pole (4.6m) Numbers 14 3318.00 46452.00

49 102382 Supply of colour light Signal pole (3.6m) Numbers 56 2974.00 166544.00

Supply of surface base to suit CLS Signal pole 140mm dia with
50 102390 necessary inspection as per specification/ drawing/ description Numbers 70 4118.00 288260.00
enclosed in this document.

Supply of ladder with platform and shoes to suit CLS pole 4.6m/
3.6m tall, with necessary inspection as per specification/
drawing/ description enclosed in this document.

51 102401 Supply of ladder with platform and shoes for 4.6m CLS pole Numbers 14 3203.00 44842.00

52 102402 Supply of ladder with platform and shoes for 3.6m CLS pole Numbers 56 3089.00 172984.00

Supply of Ground type shunt signal - complete with surface base,

53 102420 signal pole, hood etc., with necessary inspection as per Numbers 14 4118.00 57652.00
specification/ drawing/ description enclosed in this document.

Supply of Colour Light Signal Multi Unit type - complete for 4/ 3/

2 aspect with mounting socket, with necessary inspection as per
specification/ drawing/ description enclosed in this document.

54 102431 Supply of colour light Signal unit - 4 aspect Numbers 2 12584.00 25168.00

55 102432 Supply of colour light Signal unit - 3 aspect Numbers 42 10296.00 432432.00

56 102433 Supply of colour light Signal unit - 2 aspect Numbers 28 8580.00 240240.00

Supply of Junction type route indicator - 5 unit arm - 1/ 2/ 3/ 4/

5/ 6 way with mounting sockets, with necessary inspection as per
https://www.ireps.gov.in/epsn/works/tds/publishLOAWorksLetter.do?Action=ViewPublishedLetter&nitOId=67766682&tdId=1654305&letterId=78… 14/22
8/17/23, 5:40 PM ireps.gov.in/epsn/works/tds/publishLOAWorksLetter.do?Action=ViewPublishedLetter&nitOId=67766682&tdId=1654305&letter…
specification/ drawing/ description enclosed in this document.

57 102441 Supply of Junction type route indicator - 1 way Numbers 14 10868.00 152152.00

Supply of Calling On Signal / 'A' marker light - complete with

necessary inspection as per specification/ drawing/ description
enclosed in this document.

58 102451 Supply of Calling On Signal Numbers 42 2059.00 86478.00

Supply of Off-set brackets - large/ small made of cast iron with

necessary inspection as per specification/ drawing/ description
enclosed in this document.

59 102461 Supply of Off-set bracket (large) Numbers 14 2059.00 28826.00

60 102462 Supply of Off-set bracket (small) Numbers 2 1487.00 2974.00

Supply of cable termination box (FRP type) with necessary

61 102470 inspection as per specification/ drawing/ description enclosed in Numbers 30 9266.00 277980.00
this document.

Supply of PBT terminals 25mm/ 60mm centre and PBT Fuse

blocks with necessary inspection as per specification/ drawing/
description enclosed in this document.

62 102491 Supply of PBT terminal - 25mm centre Numbers 5600 44.00 246400.00

63 102492 Supply of PBT terminal - 60mm centre Numbers 1400 60.00 84000.00

64 102493 Supply of PBT fuse block (without ND fuse) Numbers 400 82.00 32800.00

Supply of apparatus cases (full/ half/ quarter size) to suit

Southern Railway standard with necessary inspection as per
specification/ drawing/ description enclosed in this document:

65 102511 Supply of apparatus case - Full size Numbers 140 12012.00 1681680.00

66 102512 Supply of apparatus case - Half size Numbers 60 8580.00 514800.00

Supply of QBCA1 - heavy duty contact relays with necessary

67 102540 inspection as per specification/ drawing/ description enclosed in Numbers 30 4140.00 124200.00
this document.

Supply of Electric key transmitter - rotary type of required ward

68 102570 Nos. with keys, with necessary inspection as per specification/ Numbers 11 4279.00 47069.00
drawing/ description enclosed in this document.

Supply of A type foundation made of cast iron as per Drg

69 102590 No.CWM.00902, and as per specification/ drawing/ description Numbers 10 5491.00 54910.00
enclosed in this document, with necessary inspection.

Provision of Interconnections between relay racks, cable

termination racks, SM's control panel, battery room, power room,
termination and wiring. The work involves laying of underground
cables in the duct as well as with clamping arrangements on the
walls, supply and fixing of aluminium ladders and supports with
3mm thick phynolic sheet for running the cables in the relay
room. Interconnection shall be carried out with signaling multi
core cable (skinned/ unskinned) and power cables as per the
instructions of Railway representative at site. The work also
include termination of the interconnection cables on 50 way
terminals in the relay rack/ control panel, cable termination rack
etc. After the interconnection cables are laid, the ducts shall be
filled with river sand and closed. Wherever required the cables
shall be taken to other floors in the building by clamping them on
MS angles and flats grouted on the walls. (Supply of
interconnection cables is not included in this schedule). [2BA
terminals, Aluminium ladder arrangements using
37mmx37mmx5mm aluminium angles and 25mmx6mm
aluminium flats, aluminium supports, phynolic sheet - 3mm thick
for bottom of aluminium ladders, MS angles and flats, bolts and
nuts, concreting materials, and all other materials required for
the work shall be supplied by the contractor].

70 103081 Provision of interconnection at stations (up to 5 roads). Lumpsum 7 41768.15 292377.05

Installation of single line FM type tokenless block instruments on

the block counter. The work involves termination of cables on the
test panel and block counter, block wiring, interconnection
between test panels and block instrument by underground
signaling cable and painting the instrument as per the
71 103260 Numbers 1 9072.00 9072.00
instructions of Railway representative at site. (Supply of block
instruments, block counters and underground cables is not
covered in this schedule). fixing terminals, wire PVC 16/0.2mm
copper, 3/0.75mm, paint, and all other miscellaneous materials
required for the work shall be supplied by the contractor].

Supply and provision of Rubber mat of not less than 6mm thick
72 103360 and with an insulation to withstand 650VAC, on the floor of relay Square Foot 350 78.30 27405.00
room etc at places as indicated by railway representative at site.

Provision of signaling arrangement during Non- Interlocked

working of Signals and Points, such as erection and wiring of
temporary relay racks and wiring of relays, SM's slide
instruments, wiring alterations in the cable termination rack,
73 103370 apparatus cases, signals, Control panel etc, as per the Station 7 18178.95 127252.65
instructions of Railway representative at site. (Supply of relay
rack, relays, and SM slide instrument is not included in this
schedule). [All other miscellaneous materials required for the
work shall be supplied by the Contractor].

74 103380 Provision of PA system and Magneto telephone communication at Day 14 885.00 12390.00
stations/ tents as per the instructions of Railway representative

Hiring of tarpaulin tents and providing the same at places as

instructed by Railway representative at site. The spacing inside
the tent shall be app 8ft x 8 ft. Each tent shall be provided with a
75 103390 Per Unit 14 718.00 10052.00
table, chair, tube lights and pedestal fan. Drinking water in cans.
The tents shall be fixed firmly to withstand rain, strong wind etc.
{Unit: per Tent per Day}

Excavation of pit, concreting 'A' type foundation and fixing

ground lever frames single/double as per Drg.No.SG/CN/02/11
complete with ground connection. The work includes concreting
of 'A' type foundations and fixing of HP lock and connecting the
ground lever frame with the HP lock using MS rod as instructed
76 104030 Numbers 10 4531.35 45313.50
by Railway representative at site. (Supply of ground lever
frames, hand plunger locks and A - type foundations is not
covered in this schedule). [Cement, river sand, stone jelly of size
20/25mm, fixing bolts and nuts with washers and all other
miscellaneous materials shall be supplied by the Contractor].

Fixing and wiring of Two Nos. of Electronic Gate Warning

equipment for each level crossing gate, one on each road
warning signal, amplifier in the apparatus case with wire PVC
77 104080 3/0.75mm and 16/0.2mm copper, and painting. (Electronic Gate Set 3 2427.75 7283.25
Warning Equipment and amplifier will be supplied by Railways).
[All wiring, fixing and painting materials shall be supplied by
Contractor].

Installation of hand plunger lock with [single/double] on gauge

tie plate for locally operated point/ on suitable fixing
arrangements for LC gate winch interlocking, connecting the
same and adjusting them. The work includes cutting suitable
notches on split stretcher bars, provision of suitable MS cover of
3mm thick for the hand plunger lock, provision of point/trap
indicator and painting. (Supply of hand plunger locks and point/
trap indicator is not covered in this schedule). [Un-cut split
stretcher bars for HP Lock Single/Double, MS cover 3mm thick,
coal bengal, fixing bolts and nuts with washers, paint and all
other miscellaneous materials required for the work shall be
supplied by the contractor].

78 104101 Installation of Hand Plunger locks (single/ double) Numbers 12 6505.00 78060.00

79 104102 Fixing of point/ trap indicator Numbers 6 1167.75 7006.50

Fixing of electrical detectors on extended gauge tie plate,

providing insulations, connecting ground connections, wiring with
wire PVC 3/0.75mm copper, connecting the detector and TLD box
through a hose pipe, drawal of jumper wires from the detector to
TLD box and painting. (Supply of Electrical detectors complete,
80 104110 switch extension pieces, ground connections, extended gauge tie Numbers 8 3504.75 28038.00
plate, TLD boxes with stumps is not covered in this schedule).
[Wire PVC 3/0.75mm copper, PVC hose pipe, all fixing bolts and
nuts, all types of insulations, paint and all other miscellaneous
materials required for this work shall be supplied by the
contractor].

Supply and installation of teakwood glass fronted box of size

300mm x 600mm x 75mm with hooks to keep various keys with
description engraved on the tags. [TW Glass fronted box of size
81 104120 Numbers 14 4057.00 56798.00
300mmx600mmx 75mm with built in lock, hooks, engraved tags
and all other miscellaneous materials required for the work shall
be supplied by the Contractor].

Fixing of EKT instrument with (or) without crank handle or on

suitable fixtures at station/apparatus case, provision of
economiser push switch with locking facility, wiring with wire PVC
16/0.2mm copper, provision of teakwood terminal box covered
with decolum along with locking facility and painting. (Supply of
82 104140 electric key transmitter and crank handles is not covered in this Numbers 1 2943.75 2943.75
schedule). [wire PVC 16/0.2mm copper, wire wound resistance,
decolum covered terminal box with locking facility by using
25mm thick teakwood, bolts and nuts, paints, push switches,
padlocks and other miscellaneous materials required for this work
shall be supplied by the contractor].

Casting concrete foundation and erection and painting of boards

with LEGEND such as //Draw close if signal is at on// at the
required places as per the Signalling plan. The work involves
concreting of rail post to a size of 600mm x 600mm x 900mm,
and fixing the board to the rail using MS clamps, bolts and nuts.
83 104150 (Supply of boards is not covered in this schedule. Rails of Numbers 14 2159.00 30226.00
different lengths will be supplied by Railways and the Contractor
has to cut them to the required lengths) [Stone jelly of size
20/25mm dia, river sand, cement,M.S.flats, fixing bolts and nuts,
paint and all other miscellaneous materials required for the work
shall be supplied by the Contractor].

84 104190 Installation and wiring of existing Way station equipment DTMF Numbers 4 4333.50 17334.00
and control telephones. The work involves fixing the released
way station equipment on the wall at an appropriate place in
consultation with Railway representative at site, wiring and
interconnecting the same with test panel, control telephones and
batteries. (Supply of way station equipment, control telephones
and batteries is not included in this schedule). [Wire PVC

Supply and installation of yard layout diagram board in the

station master's room. The board shall be made of Phynolic
synthetic industrial fibre base fine weave cotton fibre board (matt
85 104240 finish) 6mm thick size 1800mm X 1200mm with aluminium Numbers 7 9039.00 63273.00
channel frame. The yard layout shall be neatly painted and fixed
as instructed by Railway representative at site. [All materials
required for the work shall be supplied by the Contractor].

Supply of 2 pin socket - 5A with switch, fixing the same on the

hardwood plank available and extending the 110VAC using wire
PVC 3/0.75mm copper, in all the apparatus cases, as per the
86 104260 instructions of Railway representative at site. [2 pin socket - 5A Numbers 140 398.00 55720.00
with switch, wire PVC 3/0.75mm copper and all other
miscellaneous materials required for the work shall be supplied
by the Contractor].

Testing and commissioning the entire signalling installations

jointly with the Railway representative at site at the stations/ LC
gates covered under various schedules of the Contract, and
ensuring that all the signalling gears are installed and adjusted
as per the existing rules. The work also involves supply of
required number of bound registers with good quality papers with
all updated details of cable meggering, relays, batteries, block
joints, route cancellation, relay room key entries, block
instrument key, earth resistance etc., and handing over to
Railways. (Supply of 'As mades' is not covered in this schedule).

87 104271 Testing and commissioning of stations (upto 5 roads) Station 7 21018.75 147131.25

Submission of all relevant final AS MADEs of circuit diagrams,

contact analysis charts, termination particulars of apparatus
cases and cable termination rack, power supply arrangements,
relay index board, cable plans, cable route plans, red boundary
plans and all other particulars covered under various schedules.
All AS MADEs shall be prepared by the Contractor in AUTOCAD
2000 or latest and submitted in CDs. One copy of the AS MADEs
check print shall be submitted before Testing the circuits. The
final negatives shall be made in tracing sheet (80 to 90 gsm). All
AS MADEs except cable plan, cable route plan, bonding diagram
& power supply diagram shall be prepared in A3 size. On
approval the contractor shall submit along with the negatives, 8
88 104280 copies in each, duly making booklet neatly bound. Out of 8 sets, Sheet 550 206.55 113602.50
2 sets of drawings and other plans shall be kept in transparent
plastic cover (2 sheets back to back in one plastic cover) and
handed over to Railways. Also the contractor has to supply one
set of AS MADEs in Reproduction Film . The approved circuit
diagram will be issued by Railways in soft copy as well as two
sets of hard copies. Wherever alterations to existing circuits are
involved, the existing AS MADE circuit diagrams will be supplied
by Railways either in CDs or RP film. The Contractor shall
incorporate the details of all the new wirings and alterations in
the CD/ RP film and submit them to Railways. On approval 8
copies shall be made for AS MADE circuit diagrams also as
mentioned above.

Releasing of existing relay racks/ cable termination racks along

with all the terminals, fuse blocks, relays, with jacks, holding
clips etc., 50 way boards, terminals, connecting wires, cables
89 105010 etc., carefully without causing any damage, accounting and Per Unit 28 1068.75 29925.00
stacking them neatly at a place as instructed by Railway
representative at site. After releasing, the floor shall be levelled
and cement plastered. {Unit: per Rack}

Releasing of existing Route Indicators of different types including

tail cables, carefully without causing any damage, accounting and
90 105020 Numbers 14 833.25 11665.50
stacking them neatly at a place as instructed by Railway
representative at site.

Breaking of concrete and releasing of STOP board/Warning

board/ LEGEND boards along with rails, accounting and stacking
91 105030 them neatly at a place as instructed by Railway representative at Numbers 28 854.25 23919.00
site. Also the resultant pits shall be re-surfaced and consolidating
by ramming and levelling.

Releasing of hand plunger lock single/double along with switch

extension pieces, stretcher bars, point/ trap indicators and other
92 105050 fixtures carefully without damaging the materials, accounting and Set 12 1291.50 15498.00
stacking them neatly at a place as instructed by Railway
representative at site.

Releasing of existing apparatus cases (Full/ Half/ Quarter size)

without damage after releasing the shelf planks, Terminal blocks,
Fuse Blocks, Terminal Boards, Relays of all types EKTs, Secondary
Cells, power equipments, 'E' type locks, etc., and breaking the
93 105070 Numbers 140 1625.25 227535.00
concrete foundation. After releasing, the resultant pits are to be
closed and consolidated by ramming and levelling. The released
materials shall be accounted and stacked at a place as instructed
by Railway representative at site.

Breaking of concrete and releasing the existing cable termination

boxes, after releasing the base plank, Terminal blocks, Fuse
Blocks, Terminal Boards, cut rails, pipes, etc., closing the
94 105080 Numbers 28 1083.75 30345.00
resultant pits and consolidating it by ramming and levelling. The
released materials shall be accounted and stacked neatly at a
place as instructed by Railway representative at site.

Releasing of existing SM's control panel including base plank, and

other gadgets connected very carefully without causing any
damage to the panel, acounting and stacking them neatly at a
95 105090 Set 7 2841.75 19892.25
place as instructed by Railway representative at site. The
resultant pit in the flooring shall be removed of all cable bits,
levelled and cement plastered.

Dismantling and releasing of existing Colour light Signals

complete (upto 4 aspects) with or without Route Indicators,
calling on signals, shunt signals etc., carefully without any
96 105100 damage to the gadgets, accounting and stacking them neatly at a Numbers 56 1666.50 93324.00
place as instructed by Railway representative at site. The work
includes breaking the concrete foundation, closing the resultant
pit and resurfacing it by ramming and levelling.

Dismantling and releasing of existing Point machines (all types)

including ground connections and other accessories available
97 105110 complete without any damage to the gadgets, accounting and Numbers 28 1458.75 40845.00
stacking them neatly at a place as instructed by Railway
representative at site.

Dismantling and releasing of ground lever frame along with all

connected gadgets like lever locks, E-type locks, HP locks, etc.,
accounting and stacking them neatly at a place as instructed by
98 105120 Set 2 3000.00 6000.00
Railway representative at site. The work also involves breaking
and removal of concrete foundation and the resultant pit shall be
filled and consolidated by ramming and levelling.

Releasing of Secondary cells and battery stands available in the

battery room along with connecting strips, wires and terminal
boxes carefully without causing any damage to the batteries,
99 105130 Set 7 2916.75 20417.25
accounting and stacking them neatly at a place as instructed by
Railway representative at site. After releasing any holes in the
walls/ flooring shall be filled with cement mortar and plastered.

Releasing of existing Block Instruments (all types), Block

counters, batteries, block filter, block bell equipment etc.,
100 105140 Numbers 14 958.50 13419.00
carefully without any damage, accounting and stacking them
neatly at a place as instructed by Railway representative at site.

Releasing of all the S & T gadgets at LC gates like SM slide

instruments, illuminated diagram board, block counter,
termination box, telephones, emergency key box, etc and
101 105160 concerned wiring, accounting and stacking them neatly at a place Set 1 5166.00 5166.00
as instructed by Railway representative at site. After releasing
any holes on the walls/ floor are to be filled with cement mortar
and plastered.

Releasing of existing TLD boxes with stumps and terminals after

releasing all the bond wires. The released materials shall be
102 105180 Numbers 100 86.10 8610.00
accounted and stacked neatly at a place as instructed by Railway
representative at site.

Releasing of all power equipments including equipment stands,

terminal boards, power panel etc., in the power room carefully
without causing any damage to the equipments after
103 105190 disconnecting all the supply wires. The released equipments shall Set 7 6832.50 47827.50
be accounted and stacked at a place as instructed by Railway
representative at site. After releasing any holes in the walls/
flooring shall be filled with cement mortar and plastered.

Releasing of existing control equipments - complete including

way station equipments, telephones, power supply for way
104 105200 station equipment and telephones, along with all wiring, Set 7 3249.75 22748.25
accounting and stacking them neatly at a place as instructed by
Railway representative at site.

Transportation of Signalling materials by road as per the

instructions of Railway representative at site. The work also
includes loading and unloading of the materials.

105 105211 Transportation upto 100 Kms. {Unit: per Ton per KM} Per Unit 15000 12.30 184500.00

106 105212 Transportation more than 100 Kms. {Unit: per Ton per KM} Per Unit 40000 7.52 300800.00

Engaging mechanical excavators like JCB or other machineries for

regarding and levelling the formation, dismantling any infringing
107 105220 structures, clearing and removing debris etc., with all leads and Hour 25 650.00 16250.00
lifts etc., complete and as per the instruction of Railway
representative at site.

Total 18637879.15

Schedule B-SCHEULE-B VETTED SIGNALLING ITEMS (SUPPLY-SOR)

Item - 1 SCHEULE-B VETTED SIGNALLING ITEMS (SUPPLY-SOR)

S No. Item No Description of Item Unit Qty Rate Amount

Cable termination racks size 880mmX2 Meters made out of

50mmX50mmX6mm thick MS angle POWDER COATED with
stainless steel nuts and bolts for fixing the racks with suitable
1 011010 holes for hylem sheet complete as per standard practice with Numbers 14 6805.00 95270.00
tripod bases and reel insulators. Cable ladder of
400mmx2000mm be provided at both sides with angle size
40mmx4mmx5mm with supporting flat of size 25mmx5mm.

ARA Terminal block 6 Way, 25 mm Centre, made up of PBT as per

2 011030 RDSO Drg.No. SA. 23756/ Adv/Alt.3, confirming to Specification Numbers 3500 315.00 1102500.00
No. IRS.S.75/2006 (Rev.2) or latest.

3 011040 Supply of Non-Deteriorating(ND) Type of Fuse holders for Railway Numbers 350 203.00 71050.00
signalling, Rated voltage 240 AC/DC to Specn. No. IRS S.78/92

High Density Polyethylene Pipes (HDPE) of 110 mm Outer Dia, 10

mm Wall Thickness, along with one coupler for every 6 Meters as
4 011060 Metre 4500 675.00 3037500.00
per specification No. IS 4984: 2016 with latest amendments and
Material Grade:PE 80.

High Availability Single Section Digital Axle counter( HA- SSDAC)

with Dual Track Sensor Devices as per RDSO specification No.
5 011070 RDSO/SPN/177/2012 version 3.0 or latest (Phase Reversal Type) Set 7 941760.00 6592320.00
as per details given below a) Configuration - 2 DP 1 section b)
Length of cable required with each track device- 15 mtrs

Tool Kit for High Availability Single Section Digital Axle Counter as
per Specification No. RDSO/SPN/177/2012 (Version - 3) or latest,
consisting of :- (i) Portable Data Analyser (Downloading Event
Logger Data for analysis and report generation) - 1 No. (ii) Pure
Sine Wave Digital Multi-meter Fluke Make (Model-1871) or
Rishab Make (Model-28S) - 1 No. (iii) Extender Card - 1 No.(iv)
Dummy Wheel - 1 No. (v) Ring Spanner (17-19, 24-26) - 1 No.
each (vi) Open End Spanner (17-19, 24-26) - 1 No. each (vii)
6 011080 Set 2 210264.00 420528.00
Socket Spanner with Handle - 1 No. (viii) Torque Wrench (Jaicom
JPR or equivalent 88 NM_ - 1 No. (ix) Screw Driver No. 902 or as
directed by Engineer-in-Charge - 1 No. (x) Screw Driver No. 935
or as directed by Engineer-in -Charge - 1 No. (xi) Marking Jig for
Drilling - 1 No. (xii) Dummy Load to check Power Supply
(Resistive) - 1 No. and any other additional specialized Tools
suggested by RDSO Approved OEM required for Trouble Shooting
and Maintenance of Equipment

Basic material to construct Unit Maintenance Free Earth as per

7 011090 RDSO Spec No. RDSO/ SPN/197/2008 or latest and as per Set 88 22780.00 2004640.00
relevant Technical specification

8 011110 Supply of 50x6 mm GI Tape for interconnecting earth electrodes Metre 500 499.00 249500.00

35 Sq mm Multi-strand Single Core PVC insulated Copper Cable

9 011120 as per IS: 694 for connecting Main Earth Electrode to MEEB in Metre 850 446.00 379100.00
the equipment room. Color: Green

16 Sq mm Multi-strand Single Core PVC insulated Copper Cable

10 011130 as per IS: 694 for connecting MEEB to SEEB and SPDs to MEEB. Metre 850 199.00 169150.00
Color: Green

10 Sq mm Multi-strand Single Core PVC insulated Copper Cable

11 011140 as per IS: 694 for connecting SEEB to all equipments. Color: Metre 850 125.00 106250.00
Green

Earth Leakage detector 12 channel (4 Channels- 110V AC, 2

12 011170 Channels- 110V DC , 6 Channels- 24V DC) as per RDSO Numbers 7 131287.00 919009.00
Spec./256/2002 or latest with 6 digit counter.

AC/DC Digital Clamp meter Current measurement upto 200A

AC/DC True RMS measurement for AC voltage & current.(Large
13 011190 Numbers 4 5922.00 23688.00
jaw opsize of 18mm ) Model: FLUKE 362/Rishabh or higher
specification.

14 011200 Steel Almirah (Model : Godrej Store well/slimline 4S ) Numbers 7 22719.00 159033.00

Step ladder Aluminium made of BATHLA make or better of App. 5

15 011210 Numbers 4 9122.00 36488.00
feet height.

Manufacture and Supply of Block counters as per the

sketch700mmx950mmx800mm with application of patty and
good quality painting and shall have the provision to fix the PBT
terminals boards and cable inlet holes at bottom (4 Places) and
16 011220 Numbers 1 16673.00 16673.00
dummied. (Plywood sheet of thickness 25 mm x 25 mm x 6 mm,
pad locks, tower bolds, Decolum Sheet for top, sheet guage for
front slit door with tower top and bottom bolts, paints, patty shall
be supplied by the contractor.)

Flex printing with Sun board fixing of various drawing with Colour
(Power board diagram,Relay index chart,Station Rule Diagram,
17 011230 Square Foot 300 449.00 134700.00
FTOT Particulars, etc), as per instructions of Site In-Charge
Railway Representative.

Printed and bounded registers including maintanance registers

18 011240 for SSDAC, point machine, track circuit etc. (100 Pages each of Numbers 42 218.00 9156.00
75 gsm paper)

19 011250 Supply of Fencing Uprights(SCR OHE SOR - 30(a)(ii)) MT 140 66434.00 9300760.00

20 011260 Supply of Fencing Panels (SCR OHE SOR - 30(a)(i)) Metre 1000 2063.00 2063000.00

Permanently Lubricated High Density Polyethylene Duct (PLB-

HDPE), 40/33 mm Dia, along with End Cap, End Plug, Cable
21 011280 Kilometre 27 89106.00 2405862.00
Sealing Plug and Couplers, as per RDSO/SPN/TC/45/2013 Rev.2
(upto Amdt.2) or latest

Telecom Termination panel with WAGO/Pheonix/Elmex make or

similar disconnecting Terminals blocks of size 1500mm x 500mm
x 200mm thickness 1.6mm (16 SWG) 150 numbers of
disconnecting terminal block with accessories. (The box should be
22 011290 divided in to two compartments 500 mm from TOP with door Numbers 14 45842.00 641788.00
arrangement including locking, and bottom 1000mm closed fully
with screws WAGO/Pheonix/Elmex terminals suitable for cable
dimensions maximum of 2.5 sq.mm. Provision of easy and
ensuring aesthetics.

20 pair CT box with Disconnecting terminals of

23 011300 Numbers 28 4145.00 116060.00
Wago/Pheonix/Elmex make or similar

Supply of Joint kit conforming to RDSO specificaiton No.IRS-TC

24 011320 Numbers 42 3891.00 163422.00
77/2006 Revision1 or latest for quad cable.

Total 30217447.00

Schedule C-SCHEULE-C (EXECUTION-SOR)

Item - 1 SCHEDULE-C (EXEUCTIN -SOR )

S No. Item No Description of Item Unit Qty Rate Amount

Erection of CT Rack with scaffolding suitably concreting tri-pod

1 021010 bases and reel insulators with "J" bolts and nuts. Tripod and other Numbers 14 4381.00 61334.00
supporings are to be painted in 2 coats with enamel.

Track crossing by Horizontal Boring Method based on RDSO

Report No. BS - 105. This also includes insertion of HDPE Pipe of
2 021030 Metre 4000 2264.00 9056000.00
110mm Outer dia in the Bore drilled.(Supply of HDPE Pipe is not
included).

Termination of Main, Tail, Signalling and power cables and

internal wiring on terminal/ fuse blocks in cable termination Rack
at relay room. The work includes fixing of all new cables by
teakwood clamp on teakwood base plank, fixing of Hylem sheet
10 mm thick for terminal board , varnishing all teakwood items,
fixing of terminals/ fuse blocks on the terminal board, drilling of
necessary holes, termination of cables, wiring, identification of
cables using aluminium tags with letters punched neatly, as per
approved circuit diagram and cable plan, painting of particulars
3 021040 on sleeves . After terminations are over, cable entry at the Per Unit 3500 144.00 504000.00
bottom shall be closed with , cement plastered, the inter-space
filled with sand upto base level and the bottom surface shall be
sealed with sealing compound. Cable armour to be soldered to
earth.(Supply of cable termination racks is not included in this
schedule). [All bolts and nuts with washers, Hylum Sheet 10 mm
Thick, cement, sand, stone jelly, Teak wood base , paints and all
other miscellaneous materials required for the work shall be
supplied by the contractor]a. Termination on 25/60mm PBT
terminals {Per Unit-Per Terminal}

Provision of 2 Machine cut grooves in parallel at a separation of 8

4 021060 cms each to a depth of 150 mm in the platform surfaced/tiled Metre 250 674.00 168500.00
floor for laying cable.

Laying of HDPE pipe 110mm Outer Dia, 10mm Thickness along

5 021070 with collars in trenches at places of platform cutting etc., and Metre 350 55.00 19250.00
wherever required as per the instructions of site engineer.

Concreting of cable laid in the trench or GI pipe/DWC/HDPE pipe

in which cable is already laid to a size of 300*300mm with 1:3:6
6 021080 Per Unit 2000 495.00 990000.00
mortar. (All the matetrials required for the work should be
supplied by the contractor){Per Unit- RMT}

Installation of Unit Maintenance Free Earth Pit as per RDSO

7 021100 specification No.RDSO/ SPN/197/ 2008 or latest and as per Set 88 12329.00 1084952.00
Technical Specification

Installation, Testing/commissioning of Earth Leakage Detector 12

8 021140 Numbers 7 39526.00 276682.00
channel .

Transportation, Erection and wiring of IPS to power distribution

panel. This includes transportation of IPS batteries from store of
Dy CSTE/CN to the site, Erection of IPS panels on teakwood
planks, interconnection between panels and wiring the IPS to
power distribution panel using 10 sqmm multi-strand copper
9 021150 Numbers 7 61450.00 430150.00
cable. The wiring should be done neatly using Aluminium ladder
with Phynolic sheet (Aluminium ladder, Phynolic sheet of
thickness 6 mm, teak wood plank of width 150 mm and thickness
25mm, 10 sqmm multi-strand copper cable and all other
miscellaneous materials to be supplied by the contractor).

Releasing of Diesel Generators in the existing room along with all

10 021190 Numbers 14 7788.00 109032.00
other gadgets without causing any damages.

Strengthening of foundations of signals, Full/Half location boxes,

by carrying out the earth work around the foundation, ramming
11 021200 of the earth, carrying out masonry work from bottom of earth Numbers 200 4636.00 927200.00
work using country stones and cement masonry to prevent the
earth from slipping down the bank.

12 021210 Erection of Fencing Uprights(SCR OHE SOR - 30(a)(ii)) MT 140 2765.00 387100.00

13 021220 Erection of Fencing Panels (SCR OHE SOR - 30(a)(i)) Metre 1000 61.00 61000.00

Fixing of 'Telecom Termination Panel' and termination of cables

14 021230 on Wago/krone connectors as per the instructions of the site Numbers 14 5110.00 71540.00
Engineer.

Fixing of 20 pair CT box with disconnecting terminals of

wago/phonix/elmex make or similar and termination of cable at
15 021240 Numbers 28 3067.00 85876.00
the station/LC gates etc. This includes fixing of Quad/PIJF cables
and CT box on the wall.

16 021260 Provision of normal joint of Heat Shrinkable type complete for 6 Numbers 42 3553.00 149226.00
quad cable. After the jointing the through cable has to be tested
for insulation resistance and loop resistance in presents of
Railway Engineer and in case of any defects the jointing has to be
done at free of cost by the contractor. [Heat Shrinkable jointing
kit conforming to RDSO specificaiton No.IRS-TC 77/2006 covered
in the supply portion has to be used for this purpose. The
Contractor should supply all other small items free of cost which

Total 14381842.00

Schedule D-SCHEDULE-D (SUPPLY & INSTALLATION-SOR)

Item - 1 SCHEDULE-D (SUPPLY & INSTALLATION-SOR)

S No. Item No Description of Item Unit Qty Rate Amount

Preparation of Cable Route Plan, Cable Core Plan, Cable

Termination Rack Particulars, Location Box Particulars, Power
Supply Diagram, Track Circuit Bonding Diagram and/or any other
drawing on Auto- CAD in A2/A3/ A4, etc. size (as per instructions
of Engineer in-charge). Initially Contractor shall submit 2 sets of
'AS PLANNED' documents complete for approval of Railways. One
set is returned either duly approved for making a fair copy or for
re-submission for approval after incorporating the changes as
required by railways. After preliminary approval, execution of
1 031010 Station 7 98035.00 686245.00
work shall be carried out at site. After Completion of work, 2 sets
of 'AS MADE' Check Prints are submitted for Administarative
approval. Railways will return one set to the contractor duly
approved with alterations/corrections if any. The contractor shall
incorporate Railways alterations/corrections in the tracings
without any deviation and submit all tracings complete in all
respect along with its soft copies in USB Pen Drive and 6 sets of
final completion drawings in properly bound booklets. [For
Centralized Electronic Interlocking Stations/Small Stations]

Manufacture and Supply of Power Distribution Panel for IPS using

Hylem sheet 10 mm as per site requirement and erecting it using
MS angle clamp 65mm X 65mm X 8mm, HRC fuse block, Mains
control switch, ammeter by-pass switch, voltmeter, ammeter, PBT
terminals 60mm and wiring the same using wire PVC 7/1.40mm
as per approved power diagram. This also includes termination of
power cables using teakwood clamp of size 25mm X 60mm X
2 031030 Numbers 7 48844.00 341908.00
150mm on a base plank of 25mm thick 150mm width. (MS
angles 65mm X 65mm X 8mm, Hylem sheet of 10 mm Thickness,
as per site requirement, bolt and nuts required for manufacture
of power panel, HRC fuses, box and carriers, teak wood clamp,
wire 7/1.40mm, PVC casing and capping and all other
miscellenous materials will be supplied by the contractor, Supply
of PBT terminals 60mm is not included in the schedule.)

Supply and fixing of retro-reflective type Goods Warning Boards

3 031050 Numbers 14 7873.00 110222.00
as per practice & SEM(Angle/Rail is to be supplied by Railway).

Supply and fixing of retro-reflective type Calling-

4 031060 On/STOP/BSLB/Legend boards as per practice & SEM (Angle/Rail Numbers 14 6192.00 86688.00
is to be supplied by Railway).

Supply and Fixing of Normal/Emergency Key Box at Interlocked

LC Gates, made of Teak wood with Glass fronted door as per
drawing 03/91. Polishing on all exposed surface and for with EKT
inside the box. Micro push switch of L&T make with 2NO+2NC
5 031070 contacts and veeder counter non-reset type and wire them as per Numbers 3 5919.00 17757.00
the approved circuit diagram. The box should have hinges and
pad locking arrangements with one No.40 mm Navtal-Lock with
duplicate keys and key chain with label. (All materials except EKT
are to be supplied by the contractor).

Supply and Placing of Trunking and Capping (RCC Duct) of

500mm Width as per Drg. No. SDO/Cable laying/ 007 (Annexure-
6 031100 Numbers 15050 1278.00 19233900.00
10), as detailed in document No. RDSO/SI/G/2010 Ver.1.1 or
latest on 'Guidelines on signalling cable laying'

"Supply and laying of Split DWC pipe of 120/103 mm dia, 2

meter long in already dug cable trenches. The unit of RMT means
7 031110 Per Unit 14500 284.00 4118000.00
two split pipes of 1 Mtr each. Material shall be supplied as per
specification RDSO/SPN/204/2011 or latest" {Per Unit-RMT}

Supply and Installation of Pre-wired Crank Handle Cum Key Lock

Relay Box (of MS Sheet) along with LEDs, with approved type
push buttons, Wago or similar Disconnecting type Terminal Blocks
8 031130 inlcuding DIN rail etc., as per tentative drawing enclosed. Numbers 7 34673.00 242711.00
Installation, fixing and wiring of boxes for Key Lock Relays to be
carried with Contractor's wiring and fixing material. The work
shall be carried as per the instructions of site engineer.

Supply and Fixing of PVC casing and capping/PVC pipe of

minimum 25 mm size or higher as per requirement at site on the
wall/floor etc., using bends, coupler and T joints and flexible pipe
9 031150 wherever necessary with fixture in the OFC room from equipment Metre 1000 53.00 53000.00
rack to common termination and from OFC room to SM
room/Reservation office /Data logger/FOIS room etc. (All
required material for fixing to be arranged by the contractor)

Total 24890431.00

Schedule E-SCHEDULE (ELECTRONIC INTERLOCKING SUPPLY)

Item - 1 ELECTRONIC INTERLOCKING -SUPPLY

S No. Item No Description of Item Unit Qty Rate Amount

1 1 "Supply of Electronic Interlocking excluding Panel Processor (Hot Set 7 7832317.00 54826219.00
Standby) for stations with Signaling functions up to 125 units as
per Function table enclosed along with 15% spares, tools,
manuals and Instruments.EI to be provided as per RDSO Spec
No.RDSO/SPN/192/2019 or latest. This includes supply of
Maintenance VDU and Maintenance PC(embedded PC) and all
types of indoor relays along with point contactor relays(QBCA1)
https://www.ireps.gov.in/epsn/works/tds/publishLOAWorksLetter.do?Action=ViewPublishedLetter&nitOId=67766682&tdId=1654305&letterId=78… 21/22
8/17/23, 5:40 PM ireps.gov.in/epsn/works/tds/publishLOAWorksLetter.do?Action=ViewPublishedLetter&nitOId=67766682&tdId=1654305&letter…
required for points/other indoor purposes.(ref Technical
specificatons/explanatory note in the tender document)"

Incremental rate for signaling functions in EI SYSTEM over and

2 2 Per Unit 70 71250.00 4987500.00
above 125 functions under item-1 above.(per unit = per function)

Total 59813719.00

https://www.ireps.gov.in/epsn/works/tds/publishLOAWorksLetter.do?Action=ViewPublishedLetter&nitOId=67766682&tdId=1654305&letterId=78… 22/22

Design of Screw Jack
100% (6)
Design of Screw Jack
20 pages
Loa Ssbpac (D)
No ratings yet
Loa Ssbpac (D)
7 pages
02 Pune CR CR Pa SNT Wks S 2025 04
No ratings yet
02 Pune CR CR Pa SNT Wks S 2025 04
17 pages
S T Tender Document For Horizantle Boring
No ratings yet
S T Tender Document For Horizantle Boring
25 pages
Mumbai Nit 2725094
No ratings yet
Mumbai Nit 2725094
10 pages
viewNitPdf 4763563
No ratings yet
viewNitPdf 4763563
13 pages
BOQand Specification
No ratings yet
BOQand Specification
8 pages
Your Bid ID Dated
No ratings yet
Your Bid ID Dated
19 pages
viewNitPdf 2777268
No ratings yet
viewNitPdf 2777268
9 pages
Item No 20 LOA 3921 HT LT CPH Ramesh
No ratings yet
Item No 20 LOA 3921 HT LT CPH Ramesh
24 pages
DRM/S T Acting For and On Behalf of The President of India Invites E-Tenders Against Tender No N-539-2-OT-19-20-11 Closing
No ratings yet
DRM/S T Acting For and On Behalf of The President of India Invites E-Tenders Against Tender No N-539-2-OT-19-20-11 Closing
31 pages
Terminal Block 6 Way Tender
No ratings yet
Terminal Block 6 Way Tender
39 pages
viewNitPdf 4732341
No ratings yet
viewNitPdf 4732341
20 pages
RTM Dy CSTE Akhilesh Verma Sir Dahod Indore DT 15 06 24
No ratings yet
RTM Dy CSTE Akhilesh Verma Sir Dahod Indore DT 15 06 24
18 pages
VSAT Tender
No ratings yet
VSAT Tender
5 pages
Upto Closing Date and Time Only. Manual Offers Are Not Allowed Against This Tender, and Any Such Manual Offer Received Shall Be Ignored
No ratings yet
Upto Closing Date and Time Only. Manual Offers Are Not Allowed Against This Tender, and Any Such Manual Offer Received Shall Be Ignored
8 pages
Item No 4,5 LOA (22-23) 3922
No ratings yet
Item No 4,5 LOA (22-23) 3922
55 pages
CCTV Latest LOA DT 16 01 25
No ratings yet
CCTV Latest LOA DT 16 01 25
10 pages
Loa - Rub at LC 235 & 236
No ratings yet
Loa - Rub at LC 235 & 236
10 pages
WPMSFILES 3623029903f10
No ratings yet
WPMSFILES 3623029903f10
15 pages
Final Agreement
No ratings yet
Final Agreement
131 pages
Item No 3 LOA 3913 Illumination
No ratings yet
Item No 3 LOA 3913 Illumination
29 pages
SR DSTE/LJN-2nd Acting For and On Behalf of The President of India Invites E-Tenders Against Tender No 7of2018 Closing Date/Time
No ratings yet
SR DSTE/LJN-2nd Acting For and On Behalf of The President of India Invites E-Tenders Against Tender No 7of2018 Closing Date/Time
14 pages
Po WCR 4
No ratings yet
Po WCR 4
6 pages
Tambaram Loa 3
No ratings yet
Tambaram Loa 3
7 pages
Eppfs
No ratings yet
Eppfs
4 pages
viewNitPdf 4586534
No ratings yet
viewNitPdf 4586534
7 pages
Po WCR 3
No ratings yet
Po WCR 3
6 pages
Work Order No:-141A/ST/Tender/2023/ASL/713 DT: 14.02.2024
No ratings yet
Work Order No:-141A/ST/Tender/2023/ASL/713 DT: 14.02.2024
5 pages
DRM/S T Acting For and On Behalf of The President of India Invites E-Tenders Against Tender No N-539-2-OT-19-20-39 Closing
No ratings yet
DRM/S T Acting For and On Behalf of The President of India Invites E-Tenders Against Tender No N-539-2-OT-19-20-39 Closing
32 pages
Zonal and Skylifter
No ratings yet
Zonal and Skylifter
9 pages
DG Set Hiring LOA
No ratings yet
DG Set Hiring LOA
17 pages
TECH TAB E29CTrDSC - 40 2024 25EPC2 78684422
No ratings yet
TECH TAB E29CTrDSC - 40 2024 25EPC2 78684422
15 pages
LOA. 33-11 KV Ss Dhanbad Div
No ratings yet
LOA. 33-11 KV Ss Dhanbad Div
12 pages
WPMSFILES 0724045881f4
No ratings yet
WPMSFILES 0724045881f4
3 pages
2 - LOA - SPD-178 - 01-03-2021 - Signed
No ratings yet
2 - LOA - SPD-178 - 01-03-2021 - Signed
3 pages
C Block Lab Latest
No ratings yet
C Block Lab Latest
11 pages
Srinivasa Rao Agreement
No ratings yet
Srinivasa Rao Agreement
152 pages
Pre Bid Reponse 11KV Panels - 20190712173500
No ratings yet
Pre Bid Reponse 11KV Panels - 20190712173500
8 pages
64 GIS Store Kharghar Fda
No ratings yet
64 GIS Store Kharghar Fda
2 pages
BOQ - Sub STN
No ratings yet
BOQ - Sub STN
2 pages
viewNitPdf 4653585
No ratings yet
viewNitPdf 4653585
6 pages
Po SWR 1
No ratings yet
Po SWR 1
3 pages
Atc 2 PM S and T CNB
No ratings yet
Atc 2 PM S and T CNB
2 pages
viewNitPdf 4833010
No ratings yet
viewNitPdf 4833010
9 pages
GIS Quotation Final
No ratings yet
GIS Quotation Final
12 pages
viewNitPdf 2034140
No ratings yet
viewNitPdf 2034140
9 pages
dELHI DIVISION FOR Earth Testing Kit
No ratings yet
dELHI DIVISION FOR Earth Testing Kit
7 pages
viewNitPdf 4527822
No ratings yet
viewNitPdf 4527822
7 pages
Untitled
No ratings yet
Untitled
27 pages
2023-15 LOA Network
No ratings yet
2023-15 LOA Network
10 pages
NIT - Saharanpur
No ratings yet
NIT - Saharanpur
29 pages
LOAE22
No ratings yet
LOAE22
5 pages
Validate Print Help: Bidder Name
No ratings yet
Validate Print Help: Bidder Name
10 pages
South East Central Railway 29-07-2015: TENDER NOTICE No: E-09/2015 Date
No ratings yet
South East Central Railway 29-07-2015: TENDER NOTICE No: E-09/2015 Date
7 pages
viewNitPdf 4550385
No ratings yet
viewNitPdf 4550385
18 pages
viewNitPdf 4502374
No ratings yet
viewNitPdf 4502374
7 pages
Po WCR 1
No ratings yet
Po WCR 1
5 pages
Ipas THN
No ratings yet
Ipas THN
1 page
Axle Counter System BO23: Origin of Your Safety
No ratings yet
Axle Counter System BO23: Origin of Your Safety
2 pages
Datasheet ACS2000 - FRAUSHER
No ratings yet
Datasheet ACS2000 - FRAUSHER
2 pages
Frauscher Advanced Counter Fadc®: Axle Counting
No ratings yet
Frauscher Advanced Counter Fadc®: Axle Counting
2 pages
Human Resource Management 3 Semester Ishita Kheria 01916503519 BBA LLB 2019-24
No ratings yet
Human Resource Management 3 Semester Ishita Kheria 01916503519 BBA LLB 2019-24
1 page
VOLUME 3 Situational Analysis - Part1
No ratings yet
VOLUME 3 Situational Analysis - Part1
69 pages
Concept Selection
No ratings yet
Concept Selection
23 pages
Contract ID: Contract Name
No ratings yet
Contract ID: Contract Name
7 pages
MSC Data Science For Business X - HEC
No ratings yet
MSC Data Science For Business X - HEC
5 pages
Loads For Design of Stacking Tubes For Granular Materials
No ratings yet
Loads For Design of Stacking Tubes For Granular Materials
8 pages
Cse 360 SLIDE
No ratings yet
Cse 360 SLIDE
14 pages
Statistics in Context by Barbara Blatchley Official Test Bank
No ratings yet
Statistics in Context by Barbara Blatchley Official Test Bank
405 pages
Effectiveness of School Counseling Program Based On Counseling Activities To Support Mental Health Among Basic School Pupils.
No ratings yet
Effectiveness of School Counseling Program Based On Counseling Activities To Support Mental Health Among Basic School Pupils.
9 pages
1570-1635319411751-Unit 02 Marketing Processes and Planning
No ratings yet
1570-1635319411751-Unit 02 Marketing Processes and Planning
34 pages
Peru Consumer Profile
No ratings yet
Peru Consumer Profile
48 pages
Certificate of Compliance Â - EU REACH Regulation EC ... - Netgear
No ratings yet
Certificate of Compliance Â - EU REACH Regulation EC ... - Netgear
2 pages
Road Map
No ratings yet
Road Map
27 pages
Fundamental Principles of Occupational Health and Safety 2nd Edition Benjamin O. Alli Download
No ratings yet
Fundamental Principles of Occupational Health and Safety 2nd Edition Benjamin O. Alli Download
52 pages
HW Solutions1
100% (2)
HW Solutions1
6 pages
Me101 HW 1
No ratings yet
Me101 HW 1
2 pages
Assigning Controlling Areas and Company Codes
No ratings yet
Assigning Controlling Areas and Company Codes
4 pages
CH 1 Key
50% (2)
CH 1 Key
14 pages
6.1.1 The Multiplication Rule: A B C D 1 2 3
No ratings yet
6.1.1 The Multiplication Rule: A B C D 1 2 3
1 page
Resume Writing (Group # 4)
No ratings yet
Resume Writing (Group # 4)
16 pages
Neoloy CS-Highway 6, Israel v2019.2 PDF
No ratings yet
Neoloy CS-Highway 6, Israel v2019.2 PDF
4 pages
State Bank of India-HIMJA
No ratings yet
State Bank of India-HIMJA
1 page
Testing Syllabus
No ratings yet
Testing Syllabus
2 pages
Academic Self Efficacy As A Predictor of Chemistry Achievement Among Senior Secondary School Students in Anambra State
No ratings yet
Academic Self Efficacy As A Predictor of Chemistry Achievement Among Senior Secondary School Students in Anambra State
6 pages
Computer Networks UNIT-5
No ratings yet
Computer Networks UNIT-5
20 pages
Sources of Energy-1 Class 9
No ratings yet
Sources of Energy-1 Class 9
2 pages
Ingles Obesiy
No ratings yet
Ingles Obesiy
4 pages
DUA II User Manual V12
No ratings yet
DUA II User Manual V12
22 pages
ADGM General Rulebook GEN
No ratings yet
ADGM General Rulebook GEN
114 pages