Scribd
Upload
25 views2 pages

8.2 Robotic Gripper APP Control

The document outlines the control of a robotic gripper via an app, detailing how to connect the device and use the servo control button for opening and closing the gripper. It specifies the angle range for the gripper's movement and includes instructions for returning it to the initial position. If issues arise, users are advised to refer to the assembly instructions for reassembly.

Uploaded by

Ywhite Eric
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
25 views2 pages

8.2 Robotic Gripper APP Control

The document outlines the control of a robotic gripper via an app, detailing how to connect the device and use the servo control button for opening and closing the gripper. It specifies the angle range for the gripper's movement and includes instructions for returning it to the initial position. If issues arise, users are advised to refer to the assembly instructions for reassembly.

Uploaded by

Ywhite Eric
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

7.

2 Robotic Gripper APP Control


Please refer to "2.APP Control" to install the app and connect to miniAuto.

1) After connecting the device to the app, you can control the opening and
closing of the robotic gripper by using the servo control button on the right side
of the interface.

2) The icon instruction is as follows:

Icon Function
Control the opening and closing of the
robotic gripper.
Angle range: 0-60°； 0° for closed, and 60°
for fully open.

Control the robotic gripper to return to its


initial position (0°).

3) The robotic gripper control on the image transmission interface is the same
as above.

Please refer to "2.APP Control" to access the image transmission interface.


If the above functions cannot be achieved, please follow “7.1 Robotic Gripper
Assembly Instruction” to reassemble the gripper.

You might also like