10 I/Os Digital Module CPU Arduino Nano Datasheet 013001000100

Technical Features CONECTABLE PLC ARDUINO 24Vcc 10 I/Os Pinout

MODEL TYPE PLC 10 I/Os Digital Module CPU Arduino Nano

Input Voltage 12 to 24Vdc (Fuse protection (2.5A) Polarity protection)

Input rated voltage

Rated Power
24Vdc
30 W
A ZONE
I max. 1.5A

Size 100x45x115

Clock Speed 16MHz

Flash Memory 32KB of which 4KB used by bootloader

SRAM 2KB

EEPROM 1KB

Communications USB, RS485, Ethernet

USB consideration! Only for uploading or debugging. NOT connected as a serial

Cannot be working in a final application

General Features
Power supply voltage DC power supply 12 to 24 Vdc

Operating voltage range DC power supply 11.4 to 25.4 Vdc

Power consumption DC power supply 30 W MAX.

External power supply Power supply voltage 24 Vdc

Power supply out .cap. 300 mA

Dielectric strength 1500 Vac at 50/60 Hz for one minute with a leakage
current of 10 mA max.

Shock resistance 50 m/s² in the X, Y and Z direction 3 times each,

complying with the IEC-60068-2-27:2008 standard.

Ambient temperature (operating) -20 º to 70 ºC

Ambient humidity (operating) 10 % to 90 % (no condensation)

Ambient environment (operating) With no corrosive gas

External Antenna SMA Connector added

Power supply holding time 2 ms min.

Weight 350 g max.

INPUTS (x10)
Digital Input - (x10) 3.3 to 24 Vdc
Input Impedance: 27K
Separated PCB ground
Rated Voltage: 10Vac

220 Vac (3 – 48 Vdc)

Input Impedance: 54K
Rated Voltage: 220 Vac

Imin: 2 to 12 mA
Opto-isolation
Rated Voltage: 24 Vdc

Antipolarity +
Overcurrent (220 Ac)

Expandability
ModbusRTU RS485: 32 elements - USB - Ethernet

OUTPUTS (x10)
Digital Isolated 12 - 24 Vdc (23,2 Vdc)
Output - (x10) *Depending on the PLC
External Power Supply

Imax: 300 mA
Optro-isolation
Rated Voltage: 24Vdc
Imax 24Vdc: 1 A
 013001000100

Performance Specifications Warnings

Arduino Board Arduino Nano It must be used a micro USB-B type cable with the plastic part thin (contour
of 2mm).
Control method Stored program method
I/O control method Combination of the cyclic scan and immediate
refresh processing methods.
Programming language
Unused pins should not be connected. Ignoring the directive may damage the
Arduino IDE. Based on wiring (Wiring is an Open controller.
Source electronics platform composed of a
programming language. “similar to the C”) Before using this product, it is the responsibility of the user to read the
product’s User Guide and all accompanying documentation.
Microcontroller ATmega4809
Industrial Shields PLCs must be powered between 12Vdc and 24Vdc. If a
http://arduino.cc/en/Tutorial/HomePage higher voltage is supplied to the equipment can suffer irreversible damage.
Install Arduino IDE and the Industrial Shields boards Maintenance must be performed by qualified personnel familiarized with the
construction, operation, and hazards involved with the control.
The steps to follow to install our equipment’s to Arduino IDE
are: Maintenance should be performed with the control out of operation and
• Open the Arduino IDE, versión 1.8.0 or superior. If you don’t have it disconnected from all sources of power.
yet , you can download here The Industrial Shields Family PLCs are Open Type Controllers. It is required
https://www.arduino.cc/en/Main/Software . that you install the 10 I/Os Module in a housing, cabinet, or electric control
room. Entry to the housing, cabinet, or electric control room should be limited
to authorized personnel.
• Press the “Preferences”option to “File” menu and open the
preferences window. Inside the housting, cabinet or electric control room, the Industrial Shields
PLC must be at a minimum distance from the rest of the components of a
minimum of 25 cm, it can be severely damaged.
• In the text box “Additional boards manager URLs”, add the direction:
http://apps.industrialshields.com/main/arduino/boards/package_ind Failure to follow these installation requirements could result in severe
ustrialshields_index.json personal injury and/or property damage. Always follow these requirements
when installing 10 I/Os Modules.
• Close the preferences window with the “OK” button. In case of installation or maintenance of the 10 I/Os Module please follow the
instructions marked in the Installation and Maintenance section on the User
Guide.
• Click on “Tools” menu, and open the “Boards” submenu, and click the
“Boards Manager” option, to open the Boards Manager window. Do not disconnect equipment when a flammable or combustible atmosphere
is present.
Disconnection of equipment when a flammable or combustible atmosphere
• Search “industrialshields-megaavr” to the search filter and select to is present may cause a fire or explosion which could result in death, serious
the list and click “Install” injury and/or property damage.
This equipment does not include galvanic isolation between the grounds of
• Close the “Boards Manager". Once it is performed that steps, you are the different systems. This means that if an external device or sensor that
available to select each PLC that you wish to work on “Tools” -> shares the same ground reference (GND) with the system is connected, any
“Boards” : 10 IOs… potential difference between these grounds could damage the connected
components. To avoid issues with interference, ground loops, or damage to
external equipment, ensure that all connected devices share the same
To get more information: ground reference or use systems with appropriate isolation. The
https://www.industrialshields.com/first-steps-with-the-industrial- recommendations in this case are:
Connection Review: Verify that all ground connections are properly
arduino-based-plc-s-and-the-panel-pc-s-raspberry-pi-based#boards made and that there are no significant potential differences between
them.
Use of Isolation: Consider using galvanic isolators or isolation
transformers if it is necessary to connect equipment with different
ground references.
Symbology Technical Support
Indicates that the equipment is suitable for direct current only; to You can contact with us using the best channel for you:
identify relevant terminals
Indicates that the equipment is suitable for alternating current
@ [email protected]
only; to identify relevant terminals
www.industrialshields.com
To identify the control by which a pulse is started.
Visit our Blog, Forum orTicketing system
DataSheet Rev. 20250113

To identify an earth (ground) terminal in cases where neither the

symbol 5018 nor 5019 is explicily required.

To identify the switch by means of which the signal lamp(s) is Use our chat service
(are) switched on or off.

CE marking indicates that a product complies with applicable Check the user guides
European Union regulations
Indicates a potentially hazardous situation which, Visit our Channel
if not avoided, could result in death or serious injury

To indicate hazards arising from dangerous voltages