BCA Project Course Plan and schedule (MAY 2022 – SEPTEMBER 2022)

Department:BCA
Name of the Faculty:
Course Title: Project
Course Code: BCA605P
No. of Credits:6
No. of hours Allocated per week: 16 by university
Programme:BCA
Course Description: PROJECT WORK Students should individually develop a project. They
should implement their project in college in any RDBMS package or any language available in
the college. The project should web based. The students have to collect data outside practical
hours. Project may be taken outside but must be implemented in the college. Internal marks can
be awarded by the guide by evaluating the performance of the students during the course of
project work. In viva-voce the questions must be directed only on the project work to access the
involvement and understanding of the problem by the students.

The project carries 200 marks is distributed as follows:

Demonstration and Presentation 130 Marks
Viva-voce 50 Marks
Project Report 20 Marks

Total no of Project hours 16 Hours per week = Approximately 180 hours, Including Documentation
Week Time Period Project/Internship Update Internal Guide Signature
Remarks

1. 7th May 2024 Internship report softcopy and Project

Title and abstract Synopsis Hardware
and software specification and SRS

2. 14th May 2024 Design of the project with a ppt or

visual demo

3. 21st May 2024 Coding and implementation -1

4. 28th May 2024 Coding and implementation -2

5. 11th June 2024 Project report softcopy submission

6. 18th June 2024 Project presentation demo(internal)

7. 25th June 2024 Hard copy of the project report

Remarks by HOD:

Signature of the HOD Signature of the Faculty

Guidelines to Fill the Course Plan

All the Student of BCA- 6th Semester has to submit their hard bind Copy Final Project report
(80-100 pages) & Soft Copy with Power Point Presentation to their concerned Internal Guide.

Order of contents
 I. Page Size and Margin
Paper size– Standard A4 Size, 85GSM
Margins:
Top Edge: 1 inch (25mm)
Left Side:1.5 inch (38mm)
Bottom edge: 1 inch (25mm)
Right side: 1 inch
II. Print out
Laser print, printed on both the sides for soft bound and only one side for the final
hard bound.
Texts description inside the report under chapters
Font size (regular text): Times New Roman of 14pt
Spacing: 1.5-line spacing
Chapters: Beginning of each chapter interleaf caption 36 bold Algerian font (36pt)
Centre aligned (Capital letters) (inter
leaf page needs to be separated by a transparency sheet at the beginning of each
chapter (format refer annexure)
Section’s Heading: 14pt bold left aligned (Capital letters)
Subsection’s Heading: 14pt bold left aligned (Title case)
Page numbers (Chapter): Bottom – centered – 14pt
Page numbers (preliminaries): Bottom – centered 14pt
Binding: Hard Binding: (Golden letter and Edge with Maroon colour strip)

III. Number of copies and submission

1. A PDF copy of the thesis, one copy of synopsis should be submitted to the HOD to
the drive.
 2. One hard bound copies of the thesis have to be submitted to the HOD and Internal
Guide.
3. If students want, they can take one copy of thesis and keep it.
Submission of project proposal:
Approval of Project Topic / Proposal:
Submission of the Project Report (one copy) in bound form
Mock Viva-Voce to be conducted:
BCA PROJECT:
Students are encouraged to work in the areas listed at the end. However, it is not mandatory for a
student to work on a real life / time project. The student can formulate a project problem with the
help of Internal Guide.
PROJECT PROPOSAL PREPARATION GUIDELINES
(SYNOPSIS)
The project proposal should be prepared in consultation with your guide. The project proposal
should clearly state the project objectives and the environment of the proposed project to be
undertaken. The project work should compulsorily include the software development. The
project proposal should contain complete details in the following form:
1. Title of the Project
2. Introduction and Objectives of the Project
3. Project Category (RDBMS/OOPS/Networking/Multimedia/Artificial Intelligence/Expert
Systems etc.)
4. Analysis (DFDs at least up to second level , ER Diagrams/ Class Diagrams/ Database Design
etc. as per the project requirements).
5. A complete structure which includes:
I. Number of modules and their description to provide an estimation of the student’s effort
on the project.
II. Data Structures as per the project requirements for all the modules.
III. Process Logic of each module.
IV. Testing process to be used.
V. Reports generation ( Mention tentative content of report)
6. Tools / Platform, Hardware and Software Requirement specifications
7. Are you doing this project for any Industry/Client? Mention Yes/No. If Yes, Mention the
Name and Address of the Industry or Client
8. Future scope and further enhancement of the project.

PROJECT REPORT PREPARATION GUIDELINES

The following items should be included in the Project Report:

The project report must contain the following:
1) Introduction
2) Objectives
3) Tools/Environment Used
 4) Analysis Document (This should include SRS in proper structure based on Software
Engineering concepts, E-R diagrams/Class diagrams/any related diagrams, Data flow
diagrams/other similar diagrams.
5) Design Document (Modularization details, Data integrity & constraints including
database design, Procedural design, and User interface design)
6) Program code (Complete code (well indented)/Detailed specification instead of code*,
Comments & Description. The program code should always be developed in such a way
that it includes complete error handling, passing of parameters as required, placement of
procedure/function statements as needed.)
7) Testing (Test case designs are to be included separately for Unit testing, Integration
testing, System testing; Reports of the outcome of Unit testing, Integration testing,
System testing are to be included separately. Also, details of debugging and code
improvement are to be included.)
8) Input and Output Screens
9) Implementation of Security for the Software developed (In case, you have set up a User
Name and Password for your software, you should ensure the security of User Name and
Password during transmission to server)
10) Limitations of the Project
11) Future Application of the Project
12) Bibliography

Recommendations from the Department about Software / Hardware / Other tools

Recommended Applications Financial/ Manufacturing/ Multimedia/

Computer Graphics/ Instructional Design/
Database Management System/ Internet/
Intranet/ Computer Networking Communication
Software/E-Commerce/ ERP / MRP/ TCP/IP
 Internals/ Routing protocols/ Socket
Programming/ Implementation of Switches &
Routers/Mobile Application etc.
FRONT END / GUI Tools Visual Basic, Power Builder, X-Windows
(X/lib, X/motif, X/Intrinsic), Oracle
Developer 2000, VC++, Jbuilder.
RDBMS/BACK END Oracle, Ingres, Sybase, Progress, SQL Plus,
Versant, MY SQL, SQL Server, DB2
LANGUAGES C, C++, Java, VC++, PERL, PYTHAN,C#
MIDDLE WARE (COMPONENT) COM/DCOM, Active-X, EJB, Rational
TECHNOLOGIES Rose, MSMQ, BEA, Message Q, MTS,
CICS
SCRIPTING LANGUAGES PERL, SHELL Scripts(Unix), TcL/TK
UNIX INTERNALS Device Drivers, Pipes, RPC, Threads,
Sockets
ARCHITECTURAL CONCEPTS CORBA, TUXEDO
INTERNET TECHNOLOGIES DHTML, Java script, VB Script, Perl &
CGI script, HTML, Java, Active X, RMI,
CORBA, SWING, JSP, ASP, XML, EJB,
Java Beans, Java Servlets, Visual Age for
JAVA, UML, VRML, WML, iPlanet, ATG,
BigTalk, CSS, XSL, Oracle ASP server,
VB.Net, AWT, J2EE, LDAP, ColdFusion
etc.
NETWORKING TECHNOLOGIES ATM, Frame Relay, TCP/IP, SNMP, GSM,
VoIP, PPP, IP-PSTN, SONET/SDH etc.
WIRELESS TECHNOLOGIES Blue Tooth, 3G, ISDN, EDGE, Mobile
Apps etc.
REALTIME OPERATING SYSTEM/ QNX, LINUX, OSEK, DSP, VRTX, RTXC,
EMBEDDED SKILLS Nucleus
OPERATING SYSTEMS WINDOWS 2000/ME/XP/10, WINDOWS
NT, UNIX, LINUX, IRIX, SUN SOLARIS,
HP/UX, PSOS, VxWorks, AS400, AIX etc.

DECLARATION
I, Mr/Ms/Mrs. _____________________________________________________of 6th Semester,
with University Registration Number _______________________________ am aware of the
requirements for my Project completion as per the guidelines given below and accept and abide
by all the rules.
 This project is an individual project.
 Student needs to submit an Internship Certificate having put in minimum of 30 hours of
internship, mentioning the details of the area, project title etc.
 Student will be fully responsible for their project execution.
 Students should attend the review meeting regularly and produce their project status.
Students who fail to do so will not be permitted for the project exam.
 Internal Guide will regularly monitor the progress of the project as well as the
documentation. The project report will be signed, only after the fulfilment of all the
required criteria.

I accept all the above guidelines

Signature of the Student: ______________________________________

Place: ___________________________
Date: ____________________________

Name and Signature of the Internal Guide: ______________________________________

Name and Signature of the Project Coordinator: __________________________________

Principal