Scribd
Upload
12 views7 pages

FindOutCornerPoint Imax Angle

This document provides instructions on how to install and use the FindOutCornerPoint_Imax_Angle macro, which identifies the corner point of the Torque Vs Speed curve in an unresolved Flux Project. It outlines the macro's goals, requirements, installation path, and steps for execution, including necessary input and expected output parameters. The document serves as a comprehensive guide for users to effectively utilize the macro within the Flux software environment.

Uploaded by

Cầu Cao
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
12 views7 pages

FindOutCornerPoint Imax Angle

This document provides instructions on how to install and use the FindOutCornerPoint_Imax_Angle macro, which identifies the corner point of the Torque Vs Speed curve in an unresolved Flux Project. It outlines the macro's goals, requirements, installation path, and steps for execution, including necessary input and expected output parameters. The document serves as a comprehensive guide for users to effectively utilize the macro within the Flux software environment.

Uploaded by

Cầu Cao
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

Macros

How to use macro: FindOutCornerPoint_Imax_Angle?

Creation 05/05/2018
Last update 14/06/2018
Version soft Flux V18
Author TA
Reviewers

Introduction This document deals with how to install a macro, and how to use the
FindOutCornerPoint_Imax_Angle macro. It will include the following topics:
• Macro definition: FindOutCornerPoint_Imax_Angle
• Install a macro

1
Macros

Macro definition: FindOutCornerPoint_Imax_Angle

Goal of the This macro allows to find out the corner point of the Torque Vs Speed curve
macro starting from an unresolved Flux Project.
The corner point of the torque Vs speed curve corresponds to the maximum
useful power and the maximum speed, and is defined by considering the
maximum voltage and current (Imax. and Vmax.).

Figure 1 : efficiency Map Example : Torque (Nm) Vs Speed (rpm)


The macro runs a set of computation vs angular position, speed and angle,
creates tabulated parameters: Torque/Speed, Angle/Speed, Voltage/Speed and
generates a variation parameter containing the corresponding Speed to Vrms
max

Figure 2: Interface of findoutcornerpoint_Imax_Angle macro

2
Macros

Figure 3: Example of the superimposition of the “voltage RMS Vs angle” curves

Figure 4: Example of curve of the tabulated parameter “Voltage/Speed”

Figure 5: Example of the Output generated at the end of the macro execution
(Input Data, Output Data)

3
Macros

Requirements In order for this macro to function properly, the following conditions on the
of the macro Flux project are obligatory:
-Presence of a solving scenario controlled only by position of a
mechanical set: Rotor
-Presence of a circuit containing current supplies
-Presence of defined variation parameters for: speed, angle and Imax,
which must be piloted by the scenario.

Figure 5: Example of the project geometry

Figure 6: Example of the project Circuit

4
Macros

Install a macro

Path Macros delivered with Flux are directly installed in folder :


Installation C:\Program Files\Altair\2020\flux\Extensions\Macros

(If Flux is installed at the path proposed by default C:\Program Files\Altair)

Calling a macro In order to use a macro, you have to follow the next steps:

Step Actions
1 Open Flux
2 Click on [Project] [Macro] [Load], and select the right macro

3 To run a macro, you have to click on [Project] [Macro] [Run]

Then select the macro you want to run.

5
Macros

Macro description

Folder Macros Description


Macro FindOutCornerPoint_I find out the corner point of the Torque Vs Speed curve
max_Angle.PFM starting from an unresolved Flux Project.

Input:
• Current Source
• value of Imax
• value of SpeedMin
• value of SpeedMax
• the step value of the speed
• value of the Vrms max of the inverter
• Solving Scenario
• the user's defined variation parameter for speed
• the user's defined variation parameter for the angle
• the user's defined variation parameter for the maximal
current
• value of AngleMin
• value of AngleMax
• value of Angle Step Value
• the extension of the name of the file (for example
‘solved’)

Output:
• Variation Parameter containing the corresponding
Speed to Vrms max

6
Macros

Dossie Macros Description


r
Macro FindOutCornerPoint_Im Trouver le point de Base de la courbe du couple en
ax_Angle.PFM fonction de la vitesse, partant d’un projet Flux non résolu

Entrée:
• Source de courant
• Valeur de Imax
• Valeur de SpeedMin
• Valeur de SpeedMax
• Valeur du pas pour la vitesse
• Valeur de Vrms max de l’onduleur
• Scenario de resolution
• Le paramètre défini par l’utilisateur pour la vitesse
• Le paramètre défini par l’utilisateur pour l’angle
• Le paramètre défini par l’utilisateur pour le courant
maximal
• Valeur de AngleMax
• Valeur de AngleMin
• Valeur de pas pour l’angle
• L’extension du nom du fichier (par exemple ‘solved’)

Sortie:
• Paramètre d’entrée/sortie qui contient la valeur de
vitesse correspondante à Vrms max

You might also like