Scribd
Upload
7 views12 pages

Projection of Lines 2

The document contains a series of questions related to the projection of lines in engineering drawing, detailing specific conditions such as angles, lengths, and positions relative to horizontal and vertical planes. Each question requires drawing projections based on given parameters, including perpendicular and inclined lines. The document serves as a guide for practicing the principles of line projection in technical drawing.

Uploaded by

uppalayushman20
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
7 views12 pages

Projection of Lines 2

The document contains a series of questions related to the projection of lines in engineering drawing, detailing specific conditions such as angles, lengths, and positions relative to horizontal and vertical planes. Each question requires drawing projections based on given parameters, including perpendicular and inclined lines. The document serves as a guide for practicing the principles of line projection in technical drawing.

Uploaded by

uppalayushman20
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 12

Projection of Lines

Rough surface
Projection of Lines

Ques.1 I. Perpendicular to the H.P., 20 mm in front of the V.P. and its one end 15 mm
above the H.P.
II. Perpendicular to the V.P., 25 mm above the H.P. and its one end in the V.P.
III.Perpendicular to the H.P., in the V.P. and its one end in the H.P.
(Assume length of line =50mm)

Ques.2 I. Inclined at 45° to the V.P., in the H.P. and its one end in the V.P.
II. Inclined at 30° to the H.P. and its one end 20 mm above it; parallel to and 30 mm
in front of the V.P.
III.Inclined at 60° to the V.P. and its one end 15 mm in front of it; parallel to and 25
mm above the H.P.
(Assume length of line =50mm)
Projection of Lines

Ques.3 A line EF, 40 mm long, is contained by VP and is perpendicular to the HP, has its end E
is at a height of 10 mm from the HP. Draw its projections in first and third quadrants
only.

Ques.4 The front view of a line AB, 60 mm long, measures 40 mm. The line is parallel to the
HP and the end A is 15 mm above HP and 20 mm in front of the VP. Draw the
projections of the line and determine its inclination (φ) with the VP.
Projection of Lines

Ques.5 A line AB, 50 mm long has its end A 15 mm above HP and 20 mm in front of the VP.
It is inclined at 30° to the HP and 45° to the VP. Draw its projections in the first
quadrants.

Ques.6 A line AB has its end A 15 mm above the HP and 20 mm in front of the VP, end B 40
mm above the HP and 50 mm in front of the VP. The distance between the end
projectors is 45 mm. Draw the projections of the line and find out true length and true
inclinations with HP and VP.
Projection of Lines
Projection of Lines

Ques.7 A line AB, 60 mm long, is inclined at 30° to the HP and 45° to the VP. Its midpoint C
is 30 mm above the HP and 40 mm in front of the VP. Draw its projections.
Projection of Lines

Ques.8 A line AB, 60 mm long, is inclined at 45° to the HP and its top view makes an angle
of 60° with the VP. The end A is in the HP and 15 mm in front of the VP. Draw its
front view and find its apparent inclination with V.P. and H.P.

Ques.9 A line AB has its end A 15 mm above the HP and 20 mm in front of the VP. The
front view of the line is 45 mm long and is inclined at 30° to the x-y line. The top
view of the line is inclined at 45° to the x-y line. Draw its projections and find out
the true length and true inclination with HP and VP.
Projection of Lines

Ques.10 A line AB, 50 mm long has its end A 15 mm away from HP and 20 mm away from
the VP. It is inclined at 30° to the HP and 45° to the VP. Draw its projections in the
first and third quadrants. Assume that the whole of the line lies in the same quadrant.

Ques.11 A line AB has its end A 20 mm away from the HP and 40 mm away from the VP, end
B 50 mm away from the HP and 15 mm away from the VP. The line AB is contained
by the profile plane. Draw its projections and find true length in first and third
quadrants only.
Projection of Lines (Traces of Line)
1. Line parallel to both HP and VP.
2. Line inclined to the HP and parallel to the VP.
3. Line inclined to the VP and parallel to the HP
4. Line perpendicular to the HP.
5. Line perpendicular to the VP.
6. Line contained by the HP
7. Line contained by the VP
8. Line contained by both HP and VP.
9. Line inclined to both HP and V.P.
10. Line contained by a profile plane
Projection of Lines (Traces of Line)

12. A line AB, 50 mm long, has its end A is 25 mm away from the HP
and 15 mm away from the VP. The line is inclined to the HP at 30° and
is parallel to the VP. Draw its projections and determine its traces in
first

13. End A of a line AB is 30 mm above the HP and 10 mm in front of


the VP and end B is 15 mm above the HP and 40 mm in front of the
VP. The distance between the end projectors is 40 mm. Draw its
projections and determine its traces.

You might also like