Article Title

First Author1,2*, Second Author2,3† and Third Author1,2†

1*
Department, Organization, Street, City, 100190, State, Country.
2
Department, Organization, Street, City, 10587, State, Country.
3
Department, Organization, Street, City, 610101, State, Country.

*Corresponding author(s). E-mail(s): [email protected];

Contributing authors: [email protected]; [email protected];
†
These authors contributed equally to this work.

Abstract
The abstract serves both as a general introduction to the topic and as a brief,
non-technical summary of the main results and their implications. Authors are
advised to check the author instructions for the journal they are submitting to
for word limits and if structural elements like subheadings, citations, or equations
are permitted.

Keywords: keyword1, Keyword2, Keyword3, Keyword4

1 Introduction
The Introduction section, of referenced text Campbell and Gear (1995) expands on
the background of the work (some overlap with the Abstract is acceptable). The
introduction should not include subheadings.
Springer Nature does not impose a strict layout as standard however authors are
advised to check the individual requirements for the journal they are planning to sub-
mit to as there may be journal-level preferences. When preparing your text please also
be aware that some stylistic choices are not supported in full text XML (publication
version), including coloured font. These will not be replicated in the typeset article if
it is accepted.

1
2 Results
Sample body text. Sample body text. Sample body text. Sample body text. Sample
body text. Sample body text. Sample body text. Sample body text.

3 This is an example for first level head—section head

3.1 This is an example for second level head—subsection head
3.1.1 This is an example for third level head---subsubsection head
Sample body text. Sample body text. Sample body text. Sample body text. Sample
body text. Sample body text. Sample body text. Sample body text.

4 Equations
Equations in LATEX can either be inline or on-a-line by itself (“display equations”).
For inline equations use the $...$ commands. E.g.: The equation Hψ = Eψ is written
via the command $H \psi = E \psi$.
For display equations (with auto generated equation numbers) one can use the
equation or align environments:
p
P 2 q
P 2
Ỹi (k) + Z̃j (k)
i=1 j=1
∥X̃(k)∥2 ≤ . (1)
p+q

where,

λa a
Dµ = ∂µ − ig A
2 µ
Faµν = ∂µ Aaν − ∂ν Aaµ + gfabc Abµ Aaν (2)

Notice the use of \nonumber in the align environment at the end of each line, except
the last, so as not to produce equation numbers on lines where no equation numbers
are required. The \label{} command should only be used at the last line of an align
environment where \nonumber is not used.
 m −3  3 ln(m/GeV) ln(c2 /5)

Y∞ = 1+ + (3)
GeV 15 15

The class file also supports the use of \mathbb{}, \mathscr{} and \mathcal{} com-
mands. As such \mathbb{R}, \mathscr{R} and \mathcal{R} produces R, R and R
respectively (refer Subsubsection 3.1.1).

2
5 Tables
Tables can be inserted via the normal table and tabular environment. To put footnotes
inside tables you should use \footnotetext[]{...} tag. The footnote appears just
below the table itself (refer Tables 1 and 2). For the corresponding footnotemark use
\footnotemark[...]

Table 1 Caption text

Column 1 Column 2 Column 3 Column 4

row 1 data 1 data 2 data 3
row 2 data 4 data 51 data 6
row 3 data 7 data 8 data 92

Source: This is an example of table footnote. This

is an example of table footnote.
1
Example for a first table footnote. This is an
example of table footnote.
2
Example for a second table footnote. This is an
example of table footnote.

The input format for the above table is as follows:

\begin{table}[<placement-specifier>]
\caption{<table-caption>}\label{<table-label>}%
\begin{tabular}{@{}llll@{}}
\toprule
Column 1 & Column 2 & Column 3 & Column 4\\
\midrule
row 1 & data 1 & data 2 & data 3 \\
row 2 & data 4 & data 5\footnotemark[1] & data 6 \\
row 3 & data 7 & data 8 & data 9\footnotemark[2]\\
\botrule
\end{tabular}
\footnotetext{Source: This is an example of table footnote.
This is an example of table footnote.}
\footnotetext[1]{Example for a first table footnote.
This is an example of table footnote.}
\footnotetext[2]{Example for a second table footnote.
This is an example of table footnote.}
\end{table}

In case of double column layout, tables which do not fit in single column width
should be set to full text width. For this, you need to use \begin{table*} ...

3
Table 2 Example of a lengthy table which is set to full textwidth

Element 11 Element 22
Project Energy σcalc σexpt Energy σcalc σexpt
Element 3 990 A 1168 1547 ± 12 780 A 1166 1239 ± 100
Element 4 500 A 961 922 ± 10 900 A 1268 1092 ± 40

Note: This is an example of table footnote. This is an example of table footnote this is an example
of table footnote this is an example of table footnote this is an example of table footnote.
1
Example for a first table footnote.
2
Example for a second table footnote.

\end{table*} instead of \begin{table} ... \end{table} environment. Lengthy

tables which do not fit in textwidth should be set as rotated table. For this, you need to
use \begin{sidewaystable} ... \end{sidewaystable} instead of \begin{table*}
... \end{table*} environment. This environment puts tables rotated to single col-
umn width. For tables rotated to double column width, use \begin{sidewaystable*}
... \end{sidewaystable*}.

6 Figures
As per the LATEX standards you need to use eps images for LATEX compilation and
pdf/jpg/png images for PDFLaTeX compilation. This is one of the major difference
between LATEX and PDFLaTeX. Each image should be from a single input .eps/vector
image file. Avoid using subfigures. The command for inserting images for LATEX and
PDFLaTeX can be generalized. The package used to insert images in LaTeX/PDFLaTeX
is the graphicx package. Figures can be inserted via the normal figure environment as
shown in the below example:

\begin{figure}[<placement-specifier>]
\centering
\includegraphics{<eps-file>}
\caption{<figure-caption>}\label{<figure-label>}
\end{figure}

Fig. 1 This is a widefig. This is an example of long caption this is an example of long caption this
is an example of long caption this is an example of long caption

4
 Table 3 Tables which are too long to fit, should be written using the “sidewaystable” environment as shown here

Element 11 Element2
Projectile Energy σcalc σexpt Energy σcalc σexpt
Element 3 990 A 1168 1547 ± 12 780 A 1166 1239 ± 100
Element 4 500 A 961 922 ± 10 900 A 1268 1092 ± 40

5
Element 5 990 A 1168 1547 ± 12 780 A 1166 1239 ± 100
Element 6 500 A 961 922 ± 10 900 A 1268 1092 ± 40

Note: This is an example of table footnote this is an example of table footnote this is an example of table footnote this is an example of table footnote
this is an example of table footnote.
1
This is an example of table footnote.
 In case of double column layout, the above format puts figure captions/images to
single column width. To get spanned images, we need to provide \begin{figure*}
... \end{figure*}.
For sample purpose, we have included the width of images in the optional argument
of \includegraphics tag. Please ignore this.

7 Algorithms, Program codes and Listings

Packages algorithm, algorithmicx and algpseudocode are used for setting algo-
rithms in LATEX using the format:

\begin{algorithm}
\caption{<alg-caption>}\label{<alg-label>}
\begin{algorithmic}[1]
...
\end{algorithmic}
\end{algorithm}

You may refer above listed package documentations for more details before setting
algorithm environment. For program codes, the “verbatim” package is required and
the command to be used is \begin{verbatim} ... \end{verbatim}.
Similarly, for listings, use the listings package. \begin{lstlisting} ...
\end{lstlisting} is used to set environments similar to verbatim environment.
Refer to the lstlisting package documentation for more details.
A fast exponentiation procedure:
begin
f o r i := 1 t o 10 s t e p 1 do
e x p t ( 2, i ) ;
n e w l i n e ( ) od Comments will be set flush to the right margin
where
p r o c e x p t ( x, n ) ≡
z := 1 ;
do i f n = 0 t h e n e x i t f i ;
do i f odd ( n ) t h e n e x i t f i ;
comment : This is a comment statement;
n := n/2 ; x := x ∗ x od ;
{ n > 0 };
n := n − 1 ; z := z ∗ x od ;
p r i n t (z ) .
end

6
Algorithm 1 Calculate y = xn
Require: n ≥ 0 ∨ x ̸= 0
Ensure: y = xn
1: y ⇐ 1
2: if n < 0 then
3: X ⇐ 1/x
4: N ⇐ −n
5: else
6: X⇐x
7: N⇐n
8: end if
9: while N ̸= 0 do
10: if N is even then
11: X⇐X×X
12: N ⇐ N/2
13: else[N is odd]
14: y⇐y×X
15: N⇐N−1
16: end if
17: end while

f o r i := maxint to 0 do
begin
{ do n o t h i n g }
end ;
Write ( ’ Case i n s e n s i t i v e ’ ) ;
Write ( ’ P a s c a l k e y w o r d s . ’ ) ;

8 Cross referencing
Environments such as figure, table, equation and align can have a label declared via
the \label{#label} command. For figures and table environments use the \label{}
command inside or just below the \caption{} command. You can then use the
\ref{#label} command to cross-reference them. As an example, consider the label
declared for Figure 1 which is \label{fig1}. To cross-reference it, use the command
Figure \ref{fig1}, for which it comes up as “Figure 1”.
To reference line numbers in an algorithm, consider the label declared for the line
number 2 of Algorithm 1 is \label{algln2}. To cross-reference it, use the command
\ref{algln2} for which it comes up as line 2 of Algorithm 1.

7
8.1 Details on reference citations
Standard LATEX permits only numerical citations. To support both numerical and
author-year citations this template uses natbib LATEX package. For style guidance
please refer to the template user manual.
Here is an example for \cite{...}: Campbell and Gear (1995). Another exam-
ple for \citep{...}: (Slifka and Whitton 2000). For author-year citation mode,
\cite{...} prints Jones et al. (1990) and \citep{...} prints (Jones et al., 1990).
All cited bib entries are printed at the end of this article: Hamburger (1995),
Geddes et al. (1992), Broy (1992), Seymour (1981), Smith (1976), Chung and Morris
(1978), Hao et al. (2014), Babichev et al. (2002), Beneke et al. (1997), Stahl (2020)
and Abbott et al. (2019).

9 Examples for theorem like environments

For theorem like environments, we require amsthm package. There are three types of
predefined theorem styles exists—thmstyleone, thmstyletwo and thmstylethree

thmstyleone Numbered, theorem head in bold font and theorem

text in italic style
thmstyletwo Numbered, theorem head in roman font and theorem
text in italic style
thmstylethree Numbered, theorem head in bold font and theorem
text in roman style

For mathematics journals, theorem styles can be included as shown in the following
examples:

Theorem 1 (Theorem subhead) Example theorem text. Example theorem text. Example
theorem text. Example theorem text. Example theorem text. Example theorem text. Example
theorem text. Example theorem text. Example theorem text. Example theorem text. Example
theorem text.

Sample body text. Sample body text. Sample body text. Sample body text. Sample
body text. Sample body text. Sample body text. Sample body text.

Proposition 2 Example proposition text. Example proposition text. Example proposition

text. Example proposition text. Example proposition text. Example proposition text. Example
proposition text. Example proposition text. Example proposition text. Example proposition
text.

Sample body text. Sample body text. Sample body text. Sample body text. Sample
body text. Sample body text. Sample body text. Sample body text.

8
Example 1 Phasellus adipiscing semper elit. Proin fermentum massa ac quam. Sed diam
turpis, molestie vitae, placerat a, molestie nec, leo. Maecenas lacinia. Nam ipsum ligula,
eleifend at, accumsan nec, suscipit a, ipsum. Morbi blandit ligula feugiat magna. Nunc eleifend
consequat lorem.

Sample body text. Sample body text. Sample body text. Sample body text. Sample
body text. Sample body text. Sample body text. Sample body text.

Remark 1 Phasellus adipiscing semper elit. Proin fermentum massa ac quam. Sed diam turpis,
molestie vitae, placerat a, molestie nec, leo. Maecenas lacinia. Nam ipsum ligula, eleifend at,
accumsan nec, suscipit a, ipsum. Morbi blandit ligula feugiat magna. Nunc eleifend consequat
lorem.

Sample body text. Sample body text. Sample body text. Sample body text. Sample
body text. Sample body text. Sample body text. Sample body text.

Definition 1 (Definition sub head) Example definition text. Example definition text. Exam-
ple definition text. Example definition text. Example definition text. Example definition text.
Example definition text. Example definition text.

Additionally a predefined “proof” environment is available: \begin{proof} ...

\end{proof}. This prints a “Proof” head in italic font style and the “body text” in
roman font style with an open square at the end of each proof environment.
Proof Example for proof text. Example for proof text. Example for proof text. Example for
proof text. Example for proof text. Example for proof text. Example for proof text. Example
for proof text. Example for proof text. Example for proof text. □

Sample body text. Sample body text. Sample body text. Sample body text. Sample
body text. Sample body text. Sample body text. Sample body text.
Proof of Theorem 1 Example for proof text. Example for proof text. Example for proof text.
Example for proof text. Example for proof text. Example for proof text. Example for proof
text. Example for proof text. Example for proof text. Example for proof text. □

For a quote environment, use \begin{quote}...\end{quote}

Quoted text example. Aliquam porttitor quam a lacus. Praesent vel arcu ut tortor cursus
volutpat. In vitae pede quis diam bibendum placerat. Fusce elementum convallis neque.
Sed dolor orci, scelerisque ac, dapibus nec, ultricies ut, mi. Duis nec dui quis leo sagittis
commodo.

Sample body text. Sample body text. Sample body text. Sample body text. Sample
body text (refer Figure 1). Sample body text. Sample body text. Sample body text
(refer Table 3).

9
10 Methods
Topical subheadings are allowed. Authors must ensure that their Methods section
includes adequate experimental and characterization data necessary for others in
the field to reproduce their work. Authors are encouraged to include RIIDs where
appropriate.
Ethical approval declarations (only required where applicable) Any article
reporting experiment/s carried out on (i) live vertebrate (or higher invertebrates),
(ii) humans or (iii) human samples must include an unambiguous statement within
the methods section that meets the following requirements:
1. Approval: a statement which confirms that all experimental protocols were
approved by a named institutional and/or licensing committee. Please identify the
approving body in the methods section
2. Accordance: a statement explicitly saying that the methods were carried out in
accordance with the relevant guidelines and regulations
3. Informed consent (for experiments involving humans or human tissue samples):
include a statement confirming that informed consent was obtained from all
participants and/or their legal guardian/s
If your manuscript includes potentially identifying patient/participant infor-
mation, or if it describes human transplantation research, or if it reports results
of a clinical trial then additional information will be required. Please visit
(https://www.nature.com/nature-research/editorial-policies) for Nature Port-
folio journals, (https://www.springer.com/gp/authors-editors/journal-author/
journal-author-helpdesk/publishing-ethics/14214) for Springer Nature journals,
or (https://www.biomedcentral.com/getpublished/editorial-policies#ethics+and+
consent) for BMC.

11 Discussion
Discussions should be brief and focused. In some disciplines use of Discussion or ‘Con-
clusion’ is interchangeable. It is not mandatory to use both. Some journals prefer a
section ‘Results and Discussion’ followed by a section ‘Conclusion’. Please refer to
Journal-level guidance for any specific requirements.

12 Conclusion
Conclusions may be used to restate your hypothesis or research question, restate your
major findings, explain the relevance and the added value of your work, highlight any
limitations of your study, describe future directions for research and recommendations.
In some disciplines use of Discussion or ’Conclusion’ is interchangeable. It is
not mandatory to use both. Please refer to Journal-level guidance for any specific
requirements.
Supplementary information. If your article has accompanying supplementary
file/s please state so here.

10
 Authors reporting data from electrophoretic gels and blots should supply the full
unprocessed scans for key as part of their Supplementary information. This may be
requested by the editorial team/s if it is missing.
Please refer to Journal-level guidance for any specific requirements.
Acknowledgements. Acknowledgements are not compulsory. Where included they
should be brief. Grant or contribution numbers may be acknowledged.
Please refer to Journal-level guidance for any specific requirements.

Declarations
Some journals require declarations to be submitted in a standardised format. Please
check the Instructions for Authors of the journal to which you are submitting to see if
you need to complete this section. If yes, your manuscript must contain the following
sections under the heading ‘Declarations’:
ˆ Funding
ˆ Conflict of interest/Competing interests (check journal-specific guidelines for which
heading to use)
ˆ Ethics approval and consent to participate
ˆ Consent for publication
ˆ Data availability
ˆ Materials availability
ˆ Code availability
ˆ Author contribution
If any of the sections are not relevant to your manuscript, please include the heading
and write ‘Not applicable’ for that section.

Editorial Policies for:

Springer journals and proceedings: https://www.springer.com/gp/editorial-policies

Nature Portfolio journals: https://www.nature.com/nature-research/editorial-policies

Scientific Reports: https://www.nature.com/srep/journal-policies/editorial-policies

BMC journals: https://www.biomedcentral.com/getpublished/editorial-policies

Appendix A Section title of first appendix

An appendix contains supplementary information that is not an essential part of the
text itself but which may be helpful in providing a more comprehensive understanding
of the research problem or it is information that is too cumbersome to be included in
the body of the paper.

11
References
Abbott TMC, et al (2019) Dark Energy Survey Year 1 Results: Constraints
on Extended Cosmological Models from Galaxy Clustering and Weak Lens-
ing. Phys Rev D 99(12):123505. https://doi.org/10.1103/PhysRevD.99.123505,
arXiv:1810.02499 [astro-ph.CO]

Babichev SA, Ries J, Lvovsky AI (2002) Quantum scissors: teleportation of single-

mode optical states by means of a nonlocal single photon. Preprint at https://arxiv.
org/abs/quant-ph/0208066v1

Beneke M, Buchalla G, Dunietz I (1997) Mixing induced CP asymmetries in inclusive

B decays. Phys Lett B393:132–142. arXiv:0707.3168 [gr-gc]

Broy M (1992) Software engineering—from auxiliary to key technologies. In: Broy M,

Denert E (eds) Software Pioneers. Springer, New York, p 10–13

Campbell SL, Gear CW (1995) The index of general nonlinear DAES. Numer Math
72(2):173–196

Chung ST, Morris RL (1978) Isolation and characterization of plasmid deoxyribonu-

cleic acid from streptomyces fradiae. Paper presented at the 3rd international
symposium on the genetics of industrial microorganisms, University of Wisconsin,
Madison, 4–9 June 1978

Geddes KO, Czapor SR, Labahn G (1992) Algorithms for Computer Algebra. Kluwer,
Boston

Hamburger C (1995) Quasimonotonicity, regularity and duality for nonlinear systems

of partial differential equations. Ann Mat Pura Appl 169(2):321–354

Hao Z, AghaKouchak A, Nakhjiri N, et al (2014) Global integrated drought monitoring

and prediction system (gidmaps) data sets. Figshare https://doi.org/10.6084/m9.
figshare.853801

Seymour RS (ed) (1981) Conductive Polymers. Plenum, New York

Slifka MK, Whitton JL (2000) Clinical implications of dysregulated cytokine produc-

tion. J Mol Med 78:74–80. https://doi.org/10.1007/s001090000086

Smith SE (1976) Neuromuscular blocking drugs in man. In: Zaimis E (ed) Neuromuscu-
lar junction. Handbook of experimental pharmacology, vol 42. Springer, Heidelberg,
pp 593–660

Stahl B (2020) deepSIP: deep learning of Supernova Ia Parameters, 0.42. Astrophysics

Source Code Library, ascl:2006.023

12