Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.

com

ELECTROMAGNETIC FIELD THEORY (3-1-0)

Module-I (12 Hours)
The Co-ordinate Systems, Rectangular, Cylindrical, and Spherical Co-ordinate System. Co-
ordinate transformation. Gradient of a Scalar field, Divergence of a vector field and curl of a
vector field. Their Physical interpretation. The Laplacian. Divergence Theorem, Stokes
Theorem. Useful vector identifies. Electrostatics: The experimental law of Coulomb, Electric
field intensity. Field due to a line charge, Sheetcharge and continuous volume charge
distribution. Electric Flux and flux density; Gauss‘s law. Application of Gauss‘s law. Energy and
Potential. The Potential Gradient. The Electric dipole. The Equipotential surfaces. Energy stored
in an electrostatic field. Boundary conditions. Capacitors and Capacitances. Poisson‘s and
Laplace‘s equations. Solutions of simple boundary value problems. Method of Images.

Module-II (10 Hours)

Steady Electric Currents: Current densities, Resistances of a Conductor; The equation of
continuity. Joules law. Boundary conditions for Current densities. The EMF. Magnetostatics:
The Biot-Savart law. Amperes Force law. Torque exerted on a current carrying loop by a
magnetic field. Gauss‘s law for magnetic fields. Magnetic vector potential. Magnetic Field
Intensity and Ampere‘s Circuital law. Boundary conditions. Magnetic Materials. Energy in
magnetic field. Magnetic circuits.

m
Module-III (12 Hours)

co
Faraday‘s law of Induction; Self and Mutual Induction. Maxwall‘s Equations from Ampere‘s and
Gauss‘s Laws. Maxwall‘s Equations in Differential and Integral forms; Equation of continuity.
g.
Comcept of Displacement Current. Electromagnetic Boundry Conditions, Poynting‘s Theorem,
in
Time-Harmonic EM Fields. Plane Wave Propagation: Helmholtz wave equation. Plane wavw
solution. Plane Wave Propagation in lossless and lossy dielectric medium and conductiong
ch

medium. Plane wave in good conductor, Surface resistance, depth of penetration. Polarization of
EM wave- Linear, Circular and Elliptical polarization. Normal and Oblique incidence of linearly
oa

polarized wave at the plane boundry of a perfect conductor, Dielectric-Dielectric Interface.

yC

Reflection and Transmission Co-efficient for parallel and perpendicular polarizrtion, Brewstr
angle.
kM

Module-IV (8 Hours)
Radio Wave Propagation: Modes of propagation, Structure of Troposphere, Tropospheric
ic
.P

Scattering, Ionosphere, Ionospheric Layers - D, E, F1, F2, regions. Sky wave propagation -
propagation of radio waves through Ionosphere, Effect of earth‗s magnetic field, Virtual height,
w
w

Skip Distance, MUF, Critical frequency, Space wave propagation.

w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

MODULE-I

STATICELECTRIC FIELD:

Electromagnetic theory is a discipline concerned with the study of charges at rest and in motion.
Electromagnetic principles are fundamental to the study of electrical engineering and physics.
Electromagnetic theory is also indispensable to the understanding, analysis and design of various
electrical, electromechanical and electronic systems. Some of the branches of study where
electromagnetic principles find application are: RF communication, Microwave Engineering,
Antennas, Electrical Machines, Satellite Communication, Atomic and nuclear research ,Radar
Technology, Remote sensing, EMI EMC, Quantum Electronics, VLSI .Electromagnetic theory is
a prerequisite for a wide spectrum of studies in the field of Electrical Sciences and Physics.
Electromagnetic theory can be thought of as generalization of circuit theory. There are certain
situations that can be handled exclusively in terms of field theory. In electromagnetic theory, the
quantities involved can be categorized as source quantities and field quantities. Source of

m
co
electromagnetic field is electric charges: either at rest or in motion. However an electromagnetic
field may cause a redistribution of charges that in turn change the field and hence the separation
g.
of cause and effect is not always visible.
in
ch

Sources of EMF:
oa

• Current carrying conductors.

yC

• Mobile phones.
kM

• Microwave oven.
• Computer and Television screen.
ic

• High voltage Power lines.

.P
w
w

Effects of Electromagnetic fields:

w

• Plants and Animals.

• Humans.
• Electrical components.

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

Fields are classified as

• Scalar field
• Vector field.
Electric charge is a fundamental property of matter. Charge exist only in positive or negative
integral multiple of electronic charge, e= 1.60 × 10-19 coulombs. [It may be noted here that in
1962, Murray Gell-Mann hypothesized Quarks as the basic building blocks of matters. Quarks
were predicted to carry a fraction of electronic charge and the existence of Quarks has been
experimentally verified.] Principle of conservation of charge states that the total charge
(algebraic sum of positive and negative charges) of an isolated system remains unchanged,
though the charges may redistribute under the influence of electric field. Kirchhoff's Current Law
(KCL) is an assertion of the conservative property of charges under the implicit assumption that
there is no accumulation of charge at the junction. Electromagnetic theory deals directly with the
electric and magnetic field vectors where as circuit theory deals with the voltages and currents.

m
co
Voltages and currents are integrated effects of electric and magnetic fields respectively.
Electromagnetic field problems involve three space variables along with the time variable and
g.
hence the solution tends to become correspondingly complex. Vector analysis is a mathematical
in
ch

tool with which electromagnetic concepts are more conveniently expressed and best
comprehended. Since use of vector analysis in the study of electromagnetic field theory results in
oa

real economy of time and thought, we first introduce the concept of vector analysis.
yC

Vector Analysis:
kM

The quantities that we deal in electromagnetic theory may be either scalar or vectors. There is
other class of physical quantities called Tensors: where magnitude and direction vary with
ic

coordinate axes]. Scalars are quantities characterized by magnitude only and algebraic sign. A
.P

quantity that has direction as well as magnitude is called a vector. Both scalar and vector
w
w

quantities are function of time and position. A field is a function that specifies a particular
w

quantity everywhere in a region. Depending upon the nature of the quantity under consideration,
the field may be a vector or a scalar field. Example of scalar field is the electric potential in a
region while electric or magnetic fields at any point is the example of vector field.

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

A vector can be written as, where, is the magnitude and is the unit vector which has unit
magnitude and same direction as that of .Two vector and are added together to give another

vector . We have Let us see the animations in the next pages for the addition of
two vectors, which has two1.parallelagram law, 2. Head &Tail rule

m
co
g.
in
ch
oa
yC
kM
ic
.P
w
w
w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

m
co
g.
in
ch
oa
yC
kM
ic
.P
w
w
w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

m
co
g.
Scaling of a vector is defined as, where is scaled version of vector and is a scalar.
in

Some important laws of vector algebra are: commutative Law Associative Law Distributive Law
ch
oa
yC
kM

The position vector of a point P is the directed distance from the origin (O) to P.
ic
.P
w
w
w

Fig 1.3Distance Vector

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

PRODUCT OF VECTOR:

When two vectors and are multiplied, the result is either a scalar or a vector depending how the
two vectors were multiplied. The two types of vector multiplication are:
Scalar product (or dot product) gives a scalar.
Vector product (or cross product) gives a vector.
The dot product between two vectors is defined as = |A||B|cosθAB

m
co
g.
in
ch
oa
yC
kM
ic
.P
w
w
w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

m
co
g.
in

Fig 1.5
ch
oa
yC
kM
ic
.P
w
w
w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

Co-ordinate Systems
In order to describe the spatial variations of the quantities, we require using appropriate co-
ordinate system. A point or vector can be represented in a curvilinear coordinate system that may
be orthogonal or non-orthogonal .An orthogonal system is one in which the co-ordinates are
mutually perpendicular. No orthogonal co-ordinate systems are also possible, but their usage is
very limited in practice .Let u = constant, v = constant and w = constant represent surfaces in a
coordinate system, the surfaces may be curved surfaces in general. Further, let , and be the unit

m
vectors in the three coordinate directions(base vectors). In general right handed orthogonal

co
curvilinear systems, the vectors satisfy the following relations: g.
in
ch
oa
yC
kM
ic
.P
w
w
w

In the following sections we discuss three most commonly used orthogonal coordinate Systems.
1. Cartesian (or rectangular) co-ordinate system
2. Cylindrical co-ordinate system
3. Spherical polar co-ordinate system

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

Cartesian Co-ordinate System:

In Cartesian co-ordinate system, we have, (u, v, w) = (x,y,z). A point P(x0, y0, z0) in
Cartesian co-ordinate system is represented as intersection of three planes x = x0, y = y0
andz = z0. The unit vectors satisfy the following relation:

Fig 1.7: Cartesian Co-ordinate System

m
co
g.
in
ch
oa
yC
kM
ic
.P
w
w
w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

m
co
g.
in
ch
oa
yC

Cylindrical Co-ordinate System:

kM
ic
.P
w
w
w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

m
co
g.
in
ch
oa
yC
kM
ic
.P
w
w
w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

m
co
g.
in
ch
oa
yC
kM
ic
.P
w
w
w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

m
co
g.
in
ch
oa
yC
kM
ic
.P
w
w
w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

m
co
g.
in
ch
oa
yC
kM

Fig 1.10
Thus we see that a vector in one coordinate system is transformed to another coordinate system
ic

through two-step process: Finding the component vectors and then variable transformation.
.P
w
w
w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

Spherical Polar Coordinates:

m
co
g.
in
ch
oa
yC
kM
ic
.P
w
w
w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

m
co
g.
in
ch
oa
yC
kM
ic
.P
w
w
w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

m
co
g.
in
ch
oa
yC

Coordinate transformation between rectangular and spherical polar:

kM

We can write
ic
.P
w
w
w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

m
co
g.
in
ch
oa
yC
kM
ic
.P
w
w
w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

m
co
g.
in
ch
oa
yC
kM
ic
.P
w
w
w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

m
co
g.
in
ch
oa
yC
kM
ic
.P
w
w
w

Fig 1.15: Closed Line Integral

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

m
co
g.
in
ch
oa
yC
kM
ic
.P
w
w
w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

The Del Operator:

The vector differential operator was introduced by Sir W. R. Hamilton and later on developed by
P. G. Tait. Mathematically the vector differential operator can be written in the general form as

m
co
g.
in
ch
oa
yC
kM
ic
.P
w
w
w

Fig 1.17: Gradient of a scalar function

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

Divergence of a Vector Field:

In study of vector fields, directed line segments, also called flux lines or streamlines,represent
field variations graphically. The intensity of the field is proportional to thedensity of lines. For
example, the number of flux lines passing through a unit surface Snormal to the vector measures
the vector field strength.

m
co
g.
in
Fig 1.18: Flux Lines
ch
oa
yC
kM
ic
.P
w
w
w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

m
co
g.
in
ch
oa
yC
kM
ic
.P
w
w
w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

m
co
g.
in
ch
oa
yC
kM
ic
.P
w
w
w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

Curl of a vector field:

We have defined the circulation of a vector field A around a closed path as. Curl of a vector field
is a measure of the vector field's tendency to rotate about a point. Curl is also defined as a vector
whose magnitude is maximum of the net circulation per unit area when the area tends to zero and
its direction is the normal direction to the area when the area is oriented in such a way so as to
make the circulation maximum. Therefore, we can write:

m
co
g.
in
Fig 1.19.a
ch
oa
yC
kM
ic
.P
w
w
w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

m
co
g.
in
ch
oa
yC
kM
ic
.P
w
w
w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

m
co
g.
in
ch
oa
yC
kM
ic
.P
w
w
w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

m
co
g.
in
ch

Stake‘s theorem:
oa

It states that the circulation of a vector field around a closed path is equal to the integral of over
yC

the surface bounded by this path. It may be noted that this equality holds provided and are
continuous on the surface.
kM
ic
.P
w
w
w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

Coulomb's Law:
Coulomb's Law states that the force between two point charges Q1and Q2 is directly
proportional to the product of the charges and inversely proportional to the square of the distance
between them. Point charge is a hypothetical charge located at a single point in space. It is an
idealized model of a particle having an electric charge.
Mathematically, where k is the proportionality constant. In SI units, Q1 and Q2 are expressed in
Coulombs(C) and R is in meters.

Where

m
co
g.
in
ch
oa
yC
kM
ic
.P

Fig 1.19.b
w
w
w

Electric Field:
The electric field intensity or the electric field strength at a point is defined as the force per unit
charge. That is

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

The electric field intensity E at a point r (observation point) due a point charge Q located at r
(source point) is given by:

Electric flux density:

As stated earlier electric field intensity or simply ‗Electric field' gives the strength of the field at
a particular point. The electric field depends on the material media in which the field is being
considered. The flux density vector is defined to be independent of the material media(as we'll

m
see that it relates to the charge that is producing it).For a linear isotropic medium under

consideration; the flux density vector is

co
g.
We define flux as
in
ch
oa
yC

Gauss's Law:
kM

Gauss's law is one of the fundamental laws of electromagnetism and it states that the total
ic

electric flux through a closed surface is equal to the total charge enclosed by the surface.
.P
w
w
w

Fig 1.19.c

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

Let us consider a point charge Q located in an isotropic homogeneous medium of dielectric

constant ε. The flux density at a distance r on a surface enclosing the charge is given by

If we consider an elementary area ds, the amount of flux passing through the elementary area is
given by

Application of Gauss's Law

Gauss's law is particularly useful in computing or where the charge distribution has Some
symmetry. We shall illustrate the application of Gauss's Law with some examples.

m
1. An infinite line charge

co
As the first example of illustration of use of Gauss's law, let consider the problem of
determination of the electric field produced by an infinite line charge of density ρLC/m. Let us
g.
in
consider a line charge positioned along the z-axis. Since the line charge is assumed to be
ch

infinitely long, the electric field will be of the form as shown If we consider a close cylindrical
surface as shown in Fig. 2.4(a), using Gauss's theorem we can write,
oa
yC
kM

Considering the fact that the unit normal vector to areas S1 and S3 are perpendicular to the
ic

electric field, the surface integrals for the top and bottom surfaces evaluates to zero. Hence we
.P

can write,
w
w
w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

m
co
g.
in
ch
oa
yC
kM
ic

Infinite Sheet of Charge

.P

It may be noted that the electric field strength is independent of distance. This is true for the
w

infinite plane of charge; electric lines of force on either side of the charge will be perpendicular
w

to the sheet and extend to infinity as parallel lines. As number of lines of force per unit area gives
w

the strength of the field, the field becomes independent of distance. For a finite charge sheet, the
field will be a function of distance.

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

Uniformly Charged Sphere

Let us consider a sphere of radius r0 having a uniform volume charge density ofdetermine
everywhere, inside and outside the sphere, we construct Gaussian surfaces for the infinite surface
charge, if we consider a placed symmetrically as shown in figure, we can write:

m
co
g.
in
ch
oa
yC
kM
ic
.P
w

Fig 1.20.a
w
w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

m
co
g.
in
ch
oa
yC
kM
ic
.P
w
w
w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

Electrostatic Potential and Equipotential Surfaces:

Let us suppose that we wish to move a positive test charge from a point P to another point Q as

m
shown in the Fig. below The force at any point along its path would cause the particle to

co
accelerate and move it out of the region if unconstrained. Since we are dealing with an
g.
electrostatic case, a force equal to the negative of that acting on the charge is to be applied while
in
moves from P to Q. The work done by this external agent in moving the charge by a distance is
ch

given by:
oa
yC
kM
ic
.P
w
w
w

Fig 1.22 Moment of Test Charge

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

The negative sign accounts for the fact that work is done on the system by the external agent.

The potential difference between two points P and Q ,VPQ, is defined as the work done per
unit charge, i.e.

m
co
g.
in
ch
oa
yC
kM
ic
.P
w
w
w

Fig 1.23 Point Charge

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

Further consider the two points A and B as shown in the Fig. 2.9. Considering the movement
of a unit positive test charge from B to A , we can write an expression for the potential difference
as

m
co
g.
in
ch
oa

The potential difference is however independent of the choice of reference

yC
kM
ic
.P

We have mentioned that electrostatic field is a conservative field; the work done in moving a
w

charge from one point to the other is independent of the path. Let us consider moving a charge
w

from point P1 to P2 in one path and then from point P2 back to P1 over a different path. If the
w

work done on the two paths were different, a net positive or negative amount of work would
have been done when the body returns to its original position P1. In a conservative field there is
no mechanism for dissipating energy corresponding to any positive work neither

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

any source is present from which energy could be absorbed in the case of negative work. Hence
the question of different works in two paths is untenable; the work must have to be independent
of path and depends on the initial and final positions. Since the potential difference is
independent of the paths taken, VAB = - VBA, and over a closed path,

m
co
g.
in
ch
oa
yC
kM
ic
.P
w
w
w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

Electric Dipole:
An electric dipole consists of two point charges of equal magnitude but of opposite sign and
separated by a small distance .as shown in figure 2.11, the dipole is formed by the two point
charges Q and -Q separated by a distance d , the charges being placed symmetrically about the
origin. Let us consider a point P at a distance r, where we are interested to find the field

m
co
g.
in
ch
oa
yC
kM
ic
.P
w
w
w

is the magnitude of the dipole moment. Once again we note that the electric field of
electric dipole varies as 1/r3 where as that of a point charge varies as 1/r2.

Equipotential Surfaces:

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

An equipotential surface refers to a surface where the potential is constant. The intersection
of an equipotential surface with an plane surface results into a path called an equipotential line.
No work is done in moving a charge from one point to the other along an equipotential line or
surface.

In figure , the dashes lines show the equipotential lines for a positive point charge. By symmetry,
the equipotential surfaces are spherical surfaces and the equipotential lines are circles. The solid
lines show the flux lines or electric lines of force.

m
co
g.
in
ch
oa
yC

Fig : Equipotential Lines for a Positive Point Charge

kM
ic

Michael Faraday as a way of visualizing electric fields introduced flux lines. It may be seen that
.P

the electric flux lines and the equipotential lines are normal to each other
w
w

In order to plot the equipotential lines for an electric dipole, we observe that for a given Q and d,
w

a constant V requires that is a constant. From this we can write to be the

equation for an equipotential surface and a family of surfaces can be generated for various values
of cv.When plotted in 2-D this would give equipotential lines

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

To determine the equation for the electric field lines, we note that field lines represent the

direction of in space. Therefore

, k is a constant

For the dipole under consideration , and therefore we can write,

m
Integrating the above expression we get , which gives the equations for electric

co
flux lines. The representative plot ( cv = c assumed) of equipotential lines and flux lines for a
g.
dipole is shown in fig . Blue lines represent equipotential, red lines represent field lines.
in
ch

Boundary conditions for Electrostatic fields:

oa

In our discussions so far we have considered the existence of electric field in the
homogeneous medium. Practical electromagnetic problems often involve media with different
yC

physical properties. Determination of electric field for such problems requires the knowledge of
kM

the relations of field quantities at an interface between two media. The conditions that the fields
ic

must satisfy at the interface of two different media are referred to as boundary conditions .
.P
w

In order to discuss the boundary conditions, we first consider the field behavior in some
w

common material media In general, based on the electric properties, materials can be classified
w

into three categories: conductors, semiconductors and insulators (dielectrics). In conductor ,

electrons in the outermost shells of the atoms are very loosely held and they migrate easily from
one atom to the other. Most metals belong to this group. The electrons in the atoms of insulators
or dielectrics remain confined to their orbits and under normal circumstances they are not
liberated under the influence of an externally applied field. The electrical properties of

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

semiconductors fall between those of conductors and insulators since semiconductors have very
few numbers of free charges.

The parameter conductivity is used characterizes the macroscopic electrical property of a

material medium. The notion of conductivity is more important in dealing with the current flow
and hence the same will be considered in detail later on.

If some free charge is introduced inside a conductor, the charges will experience a force due to
mutual repulsion and owing to the fact that they are free to move, the charges will appear on the
surface. The charges will redistribute themselves in such a manner that the field within the

conductor is zero. Therefore, under steady condition, inside a conductor

From Gauss's theorem it follows that

m
co
The surface charge distribution on a conductor depends on the shape of the conductor. The
charges on the surface of the conductor will not be in equilibrium if there is a tangential
g.
component of the electric field is present, which would produce movement of the charges. Hence
in
ch

under static field conditions, tangential component of the electric field on the conductor surface
is zero. The electric field on the surface of the conductor is normal everywhere to the surface .
oa

Since the tangential component of electric field is zero, the conductor surface is an equipotential
yC

surface. As inside the conductor, the conductor as a whole has the same potential. We
kM

may further note that charges require a finite time to redistribute in a conductor. However, this
time is very small sec for good conductor like copper.
ic
.P
w
w
w

Fig : Boundary Conditions for at the surface of a Conductor

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

Let us now consider an interface between a conductor and free space as shown in the figure

Let us consider the closed path pqrsp for which we can write,

For and noting that inside the conductor is zero, we can write

=0
Et is the tangential component of the field. Therefore we find that
Et = 0
In order to determine the normal component En, the normal component of , at the surface of
the conductor, we consider a small cylindrical Gaussian surface as shown in the Fig. Le

represent the area of the top and bottom faces and represents the height of the cylinder. Once

m
co
again, as , we approach the surface of the conductor. Since g. inside the conductor is
zero,
in
ch
oa
yC

Therefore, we can summarize the boundary conditions at the surface of a conductor as:
kM

Et = 0
ic
.P
w

Behavior of dielectrics in static electric field: Polarization of dielectric:

w

Here we briefly describe the behavior of dielectrics or insulators when placed in static electric
w

field. Ideal dielectrics do not contain free charges. As we know, all material media are composed
of atoms where a positively charged nucleus (diameter ~ 10-15m) is surrounded by negatively
charged electrons (electron cloud has radius ~ 10-10m) moving around the nucleus. Molecules of
dielectrics are neutral macroscopically; an externally applied field causes small displacement of

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

the charge particles creating small electric dipoles. These induced dipole moments modify
electric fields both inside and outside dielectric material.

Molecules of some dielectric materials posses permanent dipole moments even in the absence of
an external applied field. Usually such molecules consist of two or more dissimilar atoms and are
called polar molecules. A common example of such molecule is water molecule H2O. In polar
molecules the atoms do not arrange themselves to make the net dipole moment zero. However, in
the absence of an external field, the molecules arrange themselves in a random manner so that
net dipole moment over a volume becomes zero. Under the influence of an applied electric field,
these dipoles tend to align themselves along the field as shown in figure . There are some
materials that can exhibit net permanent dipole moment even in the absence of applied field.
These materials are called electrets that made by heating certain waxes or plastics in the presence
of electric field. The applied field aligns the polarized molecules when the material is in the

m
co
heated state and they are frozen to their new position when after the temperature is brought down
to its normal temperatures.Permanent polarization remains without an externally applied field.
g.
in
ch

As a measure of intensity of polarization, polarization vector (in C/m2) is defined as:

oa
yC
kM

n being the number of molecules per unit volume i.e. is the dipole moment per unit volume.

Let us now consider a dielectric material having polarization and compute the potential at an
ic
.P

external point O due to an elementary dipole dv'.

w
w
w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

Fig : Potential at an External Point due to an Elementary Dipole dv'.

With reference to the figure, we can write:

m
co
g.
Therefore,
in
ch
oa
yC

Where x,y,z represent the coordinates of the external point O and x',y',z' are the coordinates of
kM

the source point.

From the expression of R, we can verify that
ic
.P
w
w
w

Using the vector identity, ,where f is a scalar quantity , we have,

Converting the first volume integral of the above expression to surface integral, we can write

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

Where ɑ is the outward normal from the surface element ds' of the dielectric. From the above
expression we find that the electric potential of a polarized dielectric may be found from the
contribution of volume and surface charge distributions having densities

These are referred to as polarisation or bound charge densities. Therefore we may replace a
polarized dielectric by an equivalent polarization surface charge density and a polarization
volume charge density. We recall that bound charges are those charges that are not free to move
within the dielectric material, such charges are result of displacement that occurs on a molecular
scale during polarization. The total bound charge on the surface is

m
co
g.
The charge that remains inside the surface is
in
ch
oa
yC

The total charge in the dielectric material is zero as

kM
ic
.P

If we now consider that the dielectric region containing charge density the total volume
w

charge density becomes

w
w

Since we have taken into account the effect of the bound charge density, we can write

Using the definition of we have

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

Therefore the electric flux density

When the dielectric properties of the medium are linear and isotropic, polarisation is directly
proportional to the applied field strength and

is the electric susceptibility of the dielectric. Therefore,

is called relative permeability or the dielectric constant of the medium.

is called the absolute permittivity.
A dielectric medium is said to be linear when is independent of and the medium is
homogeneous if is also independent of space coordinates. A linear homogeneous and
isotropic medium is called a simple medium and for such medium the relative permittivity is a

m
constant.

Dielectric constant
co
may be a function of space coordinates. For anistropic materials, the
g.
dielectric constant is different in different directions of the electric field, D and E are related by a
in
permittivity tensor which may be written as:
ch
oa
yC
kM

For crystals, the reference coordinates can be chosen along the principal axes, which make off
diagonal elements of the permittivity matrix zero. Therefore, we have
ic
.P
w
w
w

Media exhibiting such characteristics are called biaxial. Further, if then the medium is
called uniaxial. It may be noted that for isotropic media,

Lossy dielectric materials are represented by a complex dielectric constant, the imaginary part of
which provides the power loss in the medium and this is in general dependant on frequency.

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

Another phenomenon is of importance is dielectric breakdown. We observed that the applied

electric field causes small displacement of bound charges in a dielectric material that results into
polarization. Strong field can pull electrons completely out of the molecules. These electrons
being accelerated under influence of electric field will collide with molecular lattice structure
causing damage or distortion of material. For very strong fields, avalanche breakdown may also
occur. The dielectric under such condition will become conducting.

The maximum electric field intensity a dielectric can withstand without breakdown is referred
to as the dielectric strength of the material.

Boundary Conditions for Electrostatic Fields:

Let us consider the relationship among the field components that exist at the interface between
two dielectrics as shown in the figure . The permittivity of the medium 1 and medium 2 are
and respectively and the interface may also have a net charge density

m
co
g.
in
ch
oa
yC

Fig : Boundary Conditions at the interface between two dielectrics

kM

We can express the electric field in terms of the tangential and normal components
ic
.P
w

Where Et and En are the tangential and normal components of the electric field respectively.
w
w

Let us assume that the closed path is very small so that over the elemental path length the

variation of E can be neglected. Moreover very near to the interface ,

Therefore

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

Thus, we have, or i.e. the tangential component of an electric field is

continuous across the interface.
For relating the flux density vectors on two sides of the interface we apply Gauss‘s law to a small
pillbox volume as shown in the figure. Once again as , we can write

i.e,

Thus we find that the normal component of the flux density vector D is discontinuous across an

m
interface by an amount of discontinuity equal to the surface charge density at the interface.

Example
co
g.
Two further illustrate these points; let us consider an example, which involves the refraction
in
of D or E at a charge free dielectric interface as shown in the figure
ch

Using the relationships we have just derived, we can write

oa
yC
kM
ic

In terms of flux density vectors,

.P
w
w
w

Therefore,

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

Fig : Refraction of D or E at a Charge Free Dielectric Interface

Capacitance and Capacitors:

We have already stated that a conductor in an electrostatic field is an Equipotential body and any
charge given to such conductor will distribute themselves in such a manner that electric field
inside the conductor vanishes. If an additional amount of charge is supplied to an isolated
conductor at a given potential, this additional charge will increase the surface charge density.

m
co
Since the potential of the conductor is given by g. , the potential of the conductor

will also increase maintaining the ratio same. Thus we can write where the constant
in
of proportionality C is called the capacitance of the isolated conductor. SI unit of capacitance is
ch

Coulomb/ Volt also called Farad denoted by F. It can It can be seen that if V=1, C = Q. Thus
capacity of an isolated conductor can also be defined as the amount of charge in Coulomb
oa

required to raise the potential of the conductor by 1 Volt.

yC

Of considerable interest in practice is a capacitor that consists of two (or more) conductors
carrying equal and opposite charges and separated by some dielectric media or free space. The
kM

conductors may have arbitrary shapes. A two-conductor capacitor is shown in figure

ic
.P
w
w
w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

Fig : Capacitance and Capacitors

When a d-c voltage source is connected between the conductors, a charge transfer occurs which
results into a positive charge on one conductor and negative charge on the other conductor. The
conductors are equipotential surfaces and the field lines are perpendicular to the conductor
surface. If V is the mean potential difference between the conductors, the capacitance is given by
. Capacitance of a capacitor depends on the geometry of the conductor and the permittivity
of the medium between them and does not depend on the charge or potential difference between
conductors. The capacitance can be computed by assuming Q(at the same time -Q on the other

conductor), first determining using Gauss‘s theorem and then determining .

We illustrate this procedure by taking the example of a parallel plate capacitor.

m
co
Example: Parallel plate capacitor g.
in
ch
oa
yC
kM
ic
.P

Fig : Parallel Plate Capacitor

w

For the parallel plate capacitor shown in the figure 2.20, let each plate has area A and a distance
w

h separates the plates. A dielectric of permittivity fills the region between the plates. The electric
w

field lines are confined between the plates. We ignore the flux fringing at the edges of the plates
and charges are assumed to be uniformly distributed over the

conducting plates with densities and – ,

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

By Gauss‘s theorem we can write,

As we have assumed to be uniform and fringing of field is neglected, we see that E is

constant in the region between the plates and therefore, we can write . Thus,

for a parallel plate capacitor we have,

Series and parallel Connection of capacitors :

Capacitors are connected in various manners in electrical circuits; series and parallel connections
are the two basic ways of connecting capacitors. We compute the equivalent capacitance for such
connections.

Series Case: Series connection of two capacitors is shown in the figure. For this case we can
write,

m
co
g.
in
ch
oa
yC
kM
ic
.P
w
w

Fig : Series Connection of Capacitors

w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

Fig : Parallel Connection of Capacitors

The same approach may be extended to more than two capacitors connected in series.

Parallel Case: For the parallel case, the voltages across the capacitors are the same.

The total charge

m
co
Therefore, g.
in
ch

Electrostatic Energy and Energy Density :

oa

We have stated that the electric potential at a point in an electric field is the amount of work
required to bring a unit positive charge from infinity (reference of zero potential) to that point.
yC

To determine the energy that is present in an assembly of charges, let us first determine the
amount of work required to assemble them. Let us consider a number of discrete chargesQ1,
kM

Q2,......., QN are brought from infinity to their present position one by one. Since initially there is
no field present, the amount of work done in bring Q1 is zero. Q2 is brought in the presence of
ic

the field of Q1, the work done W1= Q2V21 where V21 is the potential at the location of Q2 due
to Q1. Proceeding in this manner, we can write, the total work done
.P
w
w
w

Had the charges been brought in the reverse order,

Therefore,

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

Here VIJ represent voltage at the Ith charge location due to Jth charge. Therefore,

Or,

If instead of discrete charges, we now have a distribution of charges over a volume v then we
can write,

Where is the volume charge density and V represents the potential function.

m
Since, , we can write

co
g.
in

Using the vector identity,

ch
oa

, we can write
yC
kM
ic
.P
w

In the expression for point charges, since V varies as and D varies as

w
w

,the term V varies as while the area varies as . Hence the integral term varies at least

as and the as surface becomes large (i.e. ) the integral term tends to zero.
Thus the equation for W reduces to

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

, is called the energy density in the electrostatic field.

Poisson‘s and Laplace‘s Equations:

For electrostatic field, we have seen that

Form the above two equations we can write

Using vector identity we can write,

m
co
For a simple homogeneous medium, is constant and . Therefore,
g.
in
ch

This equation is known as Poisson’s equation. Here we have introduced a new operator,
oa

( del square), called the Laplacian operator. In Cartesian coordinates,

yC
kM
ic

Therefore, in Cartesian coordinates, Poisson equation can be written as:

.P
w
w
w

In cylindrical coordinates,

In spherical polar coordinate system,

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

At points in simple media, where no free charge is present, Poisson‘s equation reduces to

which is known as Laplace‘s equation.

Laplace‘s and Poisson‘s equation are very useful for solving many practical electrostatic field
problems where only the electrostatic conditions (potential and charge) at some boundaries are
known and solution of electric field and potential is to be found throughout the volume. We shall
consider such applications in the section where we deal with boundary value problems.

Method of Images:
The uniqueness theorem for Poission‘s or Laplace‘s equations, which we studied in the last
couple of lectures, has some interesting consequences. Frequently, it is not easy to obtain an
analytic solution to either of these equations. Even when it is possible to do so, it may require
rigorous mathematical tools. Occasionally, however, one can guess a solution to a problem, by
some intuitive method. When this becomes feasible, the uniqueness theorem tells us that the

m
solution must be the one we are looking for. One such intuitive method is the ― method of

co
images‖ a terminology borrowed from optics. In this lecture, we illustrate this method by some
examples.
g.
in
ch
oa
yC
kM
ic
.P
w
w
w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

Consider an infinite, grounded conducting plane occupying which occupies the x-y plane. A
charge q is located at a distance d from this plane, the location of the charge is taken along the z
axis. We are required to obtain an expression for the potential everywhere in the region z > 0 ,
excepting of course, at the location of the charge itself. Let us look at the potential at the point P
which is at a distance from the charge q (indicated by a red circle in the figure).

m
co
g.
in
ch
oa
yC
kM
ic
.P
w
w
w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

MODULE-II

A definite link between electric and magnetic fields was established by Oersted in 1820. As we
have noticed, an electrostatic field is produced by static or stationary charges. If the charges are
moving with constant velocity, a static magnetic (or magneto static) field is produced. A
magneto static field is produced by a constant current flow (or direct current). This current flow
may be due to magnetization currents as in permanent magnets, electron-beam currents as in
vacuum tubes, or conduction currents as in current-carrying wires. In this chapter, we consider
magnetic fields in free space due to direct current.

Analogy between Electric and Magnetic Fields.

m
co
g.
in
ch
oa
yC
kM
ic
.P
w
w
w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

Biot-Savart's law states that the magnetic field intensity dH produced at a point P, as shown in
Figure below, by the differential current element Idl is proportional to the product dl and the sine
of the angle a between the clement and the line joining P to the element and is inversely
proportional to the square of the distance R between P and the element.

That is Fig 2.2.1

m
co
g.
in
ch
oa
yC

Wherek is the constant of proportionality. In SI units, k = l/4𝜋, so the above equation becomes
kM
ic
.P
w
w

From the definition of cross product in above equation it is easy to notice that the above equation
w

is better put in vector form as

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

WhereR = |R| and aR = R/R. Thus the direction of dHcan be determined by the right-hand rule
with the right-hand thumb pointing in the direction of the current, the right-hand fingers
encircling the wire in the direction of dHas shown in Figure2.21. Alternatively, we can use the
right-handed screw rule to determine the direction of dH: with the screw placed along the wire
and pointed in the direction of current flow, the direction of advance of the screw is the direction
of dHas in Figure 2.2.1

Determining the direction of dHusing (a) the right-hand rule, or (b) the right-handed screw rule.

m
co
g.
in
ch
oa
yC

It is customary to represent the direction of the magnetic field intensity H by a small circle with a
kM

dot or cross sign depending on whether H (or I) is out of, or into, Just as we can have different
charge configurations, we can have different current distributions: line current, surface current,
ic
.P

and volume current. If we define K as the surface current density (in amperes/meter) and J as the
volume current density (in amperes/meter square), the source elements are related as
w
w
w

Thus in terms of the distributed current sources, the Biot-Savartlaw becomes

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

As an example, let us apply above equation to determine the field due to a straight current
carrying filamentary conductor of finite length AB. We assume that the conductor is along the z-
axis with its upper and lower ends respectively subtending anglesα1 and α2at P, the point at
which H is to be determined. Particular note should be taken of this assumption as the formula to

m
be derived will have to be applied accordingly. If we consider the contribution dHat P due to an
element dl at (0, 0, z),
co
g.
in
ch
oa
yC
kM
ic
.P
w
w
w

Fig 2.2.2

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

m
co
g.
in
ch
oa
yC

This expression is generally applicable for any straight filamentary conductor of finite length.
Notice from the above equation that H is always along the unit vector aф (i.e., along concentric
kM

circular paths) irrespective of the length of the wire or the point of interest P. As special case,
ic

when the conductor is semi-infinite(with respect to P) so that point A is now at O(0, 0, 0) while B
.P

is at (0, 0, °°); α1= 90°, α2= 0°,

w
w
w

Another special case is when the conductor is infinite in length. For this case, point A is at(0, 0, -
oo) while B is at (0, 0, °°); α1= 180°, α2= 0°,so the above equation becomes

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

Ampere's Circuital Law:

Ampere's circuital law states that the line integral of the magnetic field H (circulation of H)

Around a closed path is the net current enclosed by this path. Mathematically,

The total current Ienc can be written as

m
By applying Stoke‘s theorem, we can write
co
g.
in
ch
oa
yC

Which is the Ampere‘s law in the point form.

kM

Applications of Ampere's law:

ic
.P

We illustrate the application of Ampere's Law with some examples.

w

We compute magnetic field due to an infinitely long thin current carrying conductor as shown in
w

Fig below Using Ampere's Law, we consider the close path to be acircle of radius ρ as shown in
w

the Fig.below

If we consider a small current element is perpendicular to the plane

Containing bothdland therefore only component of H that will be present isHф

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

By applying Ampere's law we can write,

Therefore, this is same as equation.

m
co
g.
in
ch
oa

Magnetic field due to an infinite thin current carrying conductor

yC

We consider the cross section of an infinitely long coaxial conductor, the inner conductor
kM

carrying a current I and outer conductor carrying current - I as shown in above figure We
ic

compute the magnetic field as a functionρ of as follows

.P
w

In the region 0<ρ<R1

w
w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

In the region R1<ρ<R2

m
co
g.
in
ch
oa
yC
kM

Similarly if we consider the field/flux lines of a current carrying conductor as shown above
ic

figure (b), we find that these lines are closed lines, that is, if we consider a closed surface, the
.P

number of flux lines that would leave the surface would be same as the number of flux lines that
w

would enter the surface. From our discussions above, it is evident that for magnetic field,
w
w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

Hence

This is the Gauss‘s law for the magnetic field in point form.

MAGNETIC FORCES, MATERIALS, AND DEVICES

INTRODUCTION

Having considered the basic laws and techniques commonly used in calculating magnetic field B
due to current-carrying elements, we are prepared to study the force a magnetic field exerts on
charged particles, current elements, and loops. Such a study is important to problems on
electrical devices such as ammeters, voltmeters, galvanometers, cyclotrons, plasmas, motors, and
magneto hydrodynamic generators. The precise definition of the magnetic field, deliberately
sidestepped in the previous chapter, will be given here. The concepts of magnetic moments and
dipole will also be considered. Furthermore, we will consider magnetic fields in material media,

m
as opposed to the magnetic fields in vacuum or free space examined in the previous chapter. The

co
results of the preceding chapter need only some modification to account for the presence of
g.
materials in a magnetic field. Further discussions will cover inductors, inductances, magnetic
in
energy, and magnetic circuits.
ch

Magnetic Scalar and Vector Potentials:

oa
yC

In studying electric field problems, we introduced the concept of electric potential that simplified
the computation of electric fields for certain types of problems. In the same manner let us relate
kM

the magnetic field intensity to a scalar magnetic potential and write

ic
.P
w
w

From Ampere's law, we know that

w

Therefore

But using vector identity

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

Boundary Condition for Magnetic Fields:

Similar to the boundary conditions in the electro static fields, here we willconsider thebehavior
of and at the interface of two different media. In particular, we determine how the tangential
and normal components of magnetic fields behave at the boundary of two regions having
different permeability.The figure shows the interface between two media having permeabities

and , being the normal vector from medium 2 to medium 1.

m
co
g.
in
Figure: Interface between two magnetic media
ch

To determine the condition for the normal component of the flux density vector , we
oa

Consider a small pill box P with vanishingly small thickness h and having an elementary area
yC
kM
ic

Since h --> 0, we can neglect the flux through the sidewall of the pill box.
.P
w
w
w

where

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

Or,

That is, the normal component of the magnetic flux density vector is continuous across the
interface.

In vector form,

m
To determine the condition for the tangential component for the magnetic field, we consider a

co
closed path C as shown in figure . By applying Ampere's law we can write g.
in
ch

Since h -->0,
oa
yC
kM

We have shown in figure , a set of three unit vectors , and such that they satisfy
ic

(R.H. rule). Here is tangential to the interface and is the

.P

vectorperpendicular to the surface enclosed by C at the interface

w
w

The above equation can be written as

w

Or,

i.e., tangential component of magnetic field component is discontinuous across the

interfacewhere a free surface current exists.

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

If Js = 0, the tangential magnetic field is also continuous. If one of the medium is a

perfectconductor Js exists on the surface of the perfect conductor.

In vector form we can write,

Therefore,

Magnetic forces and materials:

In our study of static fields so far, we have observed that static electric fields are produced by

m
electric charges, static magnetic fields are produced by charges in motion or by steadycurrent.

co
Further, static electric field is a conservative field and has no curl, the staticmagnetic field is
g.
continuous and its divergence is zero. The fundamental relationships forstatic electric fields
in
among the field quantities can be summarized as:
ch
oa
yC

For a linear and isotropic medium,

kM
ic

Similarly for the magnetostatic case

.P
w
w
w

It can be seen that for static case, the electric field vectors and and magnetic fieldvectors and
form separate pairs.

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

MODULE-III
INDUCTION:
In electromagnetism and electronics, inductance is the property of a conductor by which a
change in current flowing through it induces (creates) a voltage (electromotive force) in both the
conductor itself (self-inductance) and in any nearby conductors (mutual inductance).
These effects are derived from two fundamental observations of physics: First, that a steady
current creates a steady magnetic field (Oersted's law), and second, that a time-varying magnetic
field induces voltage in nearby conductors (Faraday's law of induction). According to Lenz's
law, a changing electric current through a circuit that contains inductance induces a proportional
voltage, which opposes the change in current (self-inductance). The varying field in this circuit
may also induce an e.m.f. in neighbouring circuits (mutual inductance).

Faraday‘s law of Induction:

Faraday's law of induction is a basic law of electromagnetism predicting how a magnetic

field will interact with an electric circuit to produce an electromotive force (EMF)-a
phenomenon called electromagnetic induction. It is the fundamental operating principle

m
of transformers, inductors, and many types of electrical motors, generators and solenoids.

The most widespread version of Faraday's law states:

co
g.
The induced electromotive force in any closed circuit is equal to the negative of the time rate of
in
change of the magnetic flux enclosed by the circuit.
ch

Faraday's law of induction makes use of the magnetic flux ΦB through a hypothetical surface Σ
whose boundary is a wire loop. Since the wire loop may be moving, we write Σ(t) for the surface.
oa

The magnetic flux is defined by a surface integral:

yC
kM

where dA is an element of surface area of the moving surface Σ(t), B is the magnetic field (also
ic

called "magnetic flux density"), and B·dA is a vector dot product (the infinitesimal amount of
magnetic flux). In more visual terms, the magnetic flux through the wire loop is proportional to
.P

the number of magnetic flux lines that pass through the loop.
w

When the flux changes—because B changes, or because the wire loop is moved or deformed, or
w

both—Faraday's law of induction says that the wire loop acquires an EMF,  , defined as the
w

energy available from a unit charge that has travelled once around the wire loop. Equivalently, it
is the voltage that would be measured by cutting the wire to create an open circuit, and attaching
a voltmeter to the leads.
Faraday's law states that the EMF is also given by the rate of change of the magnetic flux:
,

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

Where  is the electromotive force (EMF) and ΦB is the magnetic flux. The direction of the
electromotive force is given by Lenz's law.
For a tightly wound coil of wire, composed of N identical turns, each with the same ΦB,
Faraday's law of induction states that

where N is the number of turns of wire and ΦB is the magnetic flux through a single loop.

Self Inductance:

We do not necessarily need two circuits in order to have inductive effects. Consider a single
conducting circuit around which a current I is flowing. This current generates a magnetic
field B which gives rise to a magnetic flux Φ linking the circuit. We expect the flux Φ to be
directly proportional to the current I, given the linear nature of the laws of magnetostatics, and
the definition of magnetic flux. Thus, we can write
Φ=LI

where the constant of proportionality L is called the self inductance of the circuit. Like mutual
inductance, the self inductance of a circuit is measured in units of henries, and is a purely
geometric quantity, depending only on the shape of the circuit and number of turns in the circuit.

m
co
If the current flowing around the circuit changes by an amount dI in a time interval dt then the
magnetic flux linking the circuit changes by an amount dΦ=LdI in the same time interval.
g.
According to Faraday's law, an emf
in
ch

d

dt
oa

is generated around the circuit. Since dΦ=LdI , this emf can also be written
yC

dI
  L
dt
kM

Thus, the emf generated around the circuit due to its own current is directly proportional to the
rate at which the current changes. Lenz's law, and common sense, demand that if the current is
ic

increasing then the emf should always act to reduce the current, and vice versa. This is easily
appreciated, since if the emf acted to increase the current when the current was increasing then
.P

we would clearly get an unphysical positive feedback effect in which the current continued to
w

increase without limit. It follows, from the above, that the self inductance L of a circuit is
w

necessarily a positive number. This is not the case for mutual inductances, which can be either
positive or negative.
w

Consider a solenoid of length l and cross-sectional area A. Suppose that the solenoid
has N turns. When a current I flows in the solenoid, a uniform axial field of magnitude
 NI
B= 0
l

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

is generated in the core of the solenoid. The field-strength outside the core is negligible. The
magnetic flux linking a single turn of the solenoid is Φ=BA. Thus, the magnetic flux linking
all N turns of the solenoid is
0 N 2 AI
Φ=NBA=
l

the self inductance of the solenoid is given by, which reduces to L 
I
0 N A
2
L=
l
Note that L is positive. Furthermore, L is a geometric quantity depending only on the
dimensions of the solenoid, and the number of turns in the solenoid.

Engineers like to reduce all pieces of electrical apparatus, no matter how complicated, to
an equivalent circuit consisting of a network of just four different types of component. These
four basic components are emfs, resistors, capacitors, and inductors. An inductor is simply a
pure self inductance, and is usually represented a little solenoid in circuit diagrams. In practice,
inductors generally consist of short air-cored solenoids wound from enamelled copper wire.

m
Mutual Inductance

co
g.
in
ch
oa

Two inductively coupled circuits.

yC

Consider two arbitrary conducting circuits, labelled 1 and 2. Suppose that I1 is the instantaneous
current flowing around circuit 1. This current generates a magnetic field B1 which links the
kM

second circuit, giving rise to a magnetic flux Φ1 through that circuit. If the current I2 doubles,
then the magnetic field B2 doubles in strength at all points in space, so the magnetic
ic

flux Φ2 through the second circuit also doubles. This conclusion follows from the linearity of the
.P

laws of magneto statics, plus the definition of magnetic flux. Furthermore, it is obvious that the
flux through the second circuit is zero whenever the current flowing around the first circuit is
w

zero. It follows that the flux Φ2 through the second circuit is directly proportional to the
w

current I1 flowing around the first circuit. Hence, we can write

w

2  M 21I1
where the constant of proportionality M21 is called the mutual inductance of circuit 2 with
respect to circuit 1. Similarly, the flux Φ1 through the first circuit due to the instantaneous
current I2 flowing around the second circuit is directly proportional to that current, so we can
write

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

1  M12 I 2
where M12 is the mutual inductance of circuit 1 with respect to circuit 2. It is possible to
demonstrate mathematically that M12=M21. In other words, the flux linking circuit 2 when a
certain current flows around circuit 1 is exactly the same as the flux linking circuit 1 when the
same current flows around circuit 2. This is true irrespective of the size, number of turns, relative
position, and relative orientation of the two circuits. Because of this, we can write
M12  M 21  M
where M is termed the mutual inductance of the two circuits. Note that M is a purely
geometric quantity, depending only on the size, number of turns, relative position, and relative
orientation of the two circuits. The SI units of mutual inductance are called Henries (H). One
henry is equivalent to a volt-second per ampere

It turns out that a henry is a rather unwieldy unit. The mutual inductances of the circuits typically
encountered in laboratory experiments are measured in milli-henries.Suppose that the current
flowing around circuit 1 changes by an amount dI1 in a time interval dt. The flux linking circuit 2

d2  MdI1

m
changes by an amount in the same time interval. According to Faraday's law, an emf

d2
co
g.
2  
dt
in
is generated around the second circuit due to the changing magnetic flux linking that circuit.
ch

Since, dΦ2=MdI1 , this emf can also be written

dI
oa

 2  M 1
dt
yC

Thus, the emf generated around the second circuit due to the current flowing around the first
circuit is directly proportional to the rate at which that current changes.
kM

Likewise, if the current I2 flowing around the second circuit changes by an amount dI2 in a time
interval dt then the emf generated around the first circuit is
ic

dI 2
1   M
.P

dt
Note that there is no direct physical coupling between the two circuits. The coupling is due
w

entirely to the magnetic field generated by the currents flowing around the circuits.
w

As a simple example, suppose that two insulated wires are wound on the same cylindrical
w

former, so as to form two solenoids sharing a common air-filled core. Let l be the length of the
core, A the cross-sectional area of the core, N1 the number of times the first wire is wound
around the core, and N2 the number of times the second wire is wound around the core. If a
current I1 flows around the first wire then a uniform axial magnetic field of strength B1=μ0N1I1/ l
is generated in the core. The magnetic field in the region outside the core is of negligible
magnitude.

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

The flux linking a single turn of the second wire is B1A. Thus, the flux linking all N2 turns of the
second wire is.

0 N1 N 2 AI1
Φ=N2B1A=
l

The mutual inductance of the second wire with respect to the first is

2 0 N1 N 2 A
M 21  
I1 l

Now, the flux linking the second wire when a current I2 flows in the first wire is Φ1=N1B2A,
where B2=μ0N2I2/ l is the associated magnetic field generated in the core. It follows that the
mutual inductance of the first wire with respect to the second is
 NN A
M12  1  0 1 2
I2 l
Thus, the mutual inductance of the two wires is given by

m
0 N1 N 2 A
M

co
l g.
As described previously, M is a geometric quantity depending on the dimensions of the core, and
in
the manner in which the two wires are wound around the core, but not on the actual currents
flowing through the wires.
ch
oa

Maxwell’s Equations
yC

Symbols Used
kM

i = electric
E = Electric field ρ = charge density
current
ic

J = current
B = Magnetic field ε0 = permittivity
.P

density
w

D = Electric c = speed of
μ0 = permeability
displacement light
w
w

H = Magnetic field M
P = Polarization
strength = Magnetization

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

Name Integral equations Differential equations

Gauss's law

Gauss's law
for
magnetism

Maxwell–
Faraday
equation
(Faraday's
law of
induction)

m
co
Ampère's
circuital
g.
law (with
in
Maxwell's
ch

addition)
oa

where the universal constants appearing in the equations are

yC

 the permittivity of free space ε0 and

kM

 the permeability of free space μ0.

In the differential equations, a local description of the fields,
ic
.P

 the nabla symbol ∇ denotes the three-dimensional gradient operator, and from it
 the divergence operator is ∇·
w

 the curl operator is ∇×.

w

The sources are taken to be

w

 the electric charge density (charge per unit volume) ρ and

 the electric current density (current per unit area) J.
In the integral equations; a description of the fields within a region of space,

 Ω is any fixed volume with boundary surface ∂Ω, and

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

 Σ is any fixed open surface with boundary curve ∂Σ,

 is a surface integral over the surface ∂Ω (the oval indicates the surface is closed
and not open),
 is a volume integral over the volume Ω,
 is a surface integral over the surface Σ,
 is a line integral around the curve ∂Σ (the circle indicates the curve is closed).
Here "fixed" means the volume or surface do not change in time. Although it is possible to
formulate Maxwell's equations with time-dependent surfaces and volumes, this is not
actually necessary: the equations are correct and complete with time-independent surfaces.
The sources are correspondingly the total amounts of charge and current within these
volumes and surfaces, found by integration.

 The volume integral of the total charge density ρ over any fixed volume Ω is
the total electric charge contained in Ω:

where dV is the differential volume element, and

m
 the net electrical current is the surface integral of the electric current density J,

co
passing through any open fixed surface Σ: g.
in
where dS denotes the differential vector element of surface area S normal to surface Σ. (Vector
area is also denoted by A rather than S, but this conflicts with the magnetic potential, a separate
ch

vector field).
oa

The "total charge or current" refers to including free and bound charges, or free and bound
currents.
yC

Gauss's law
kM

Gauss's law describes the relationship between a static electric field and the electric charges that
cause it: The static electric field points away from positive charges and towards negative
ic

charges. In the field line description, electric field lines begin only at positive electric charges
.P

and end only at negative electric charges. 'Counting' the number of field lines passing though
a closed surface, therefore, yields the total charge (including bound charge due to polarization of
w

material) enclosed by that surface divided by dielectricity of free space (the vacuum
w

permittivity). More technically, it relates the electric flux through any

hypothetical closed "Gaussian surface" to the enclosed electric charge.
w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

Gauss's law for magnetism: magnetic field lines never begin nor end but form loops or extend to
infinity as shown here with the magnetic field due to a ring of current.

Gauss's law for magnetism

Gauss's law for magnetism states that there are no "magnetic charges" (also called magnetic
monopoles), analogous to electric charges.[3] Instead, the magnetic field due to materials is
generated by a configuration called a dipole. Magnetic dipoles are best represented as loops of

m
current but resemble positive and negative 'magnetic charges', inseparably bound together,

co
having no net 'magnetic charge'. In terms of field lines, this equation states that magnetic field
lines neither begin nor end but make loops or extend to infinity and back. In other words, any
g.
magnetic field line that enters a given volume must somewhere exit that volume. Equivalent
in
technical statements are that the sum total magnetic flux through any Gaussian surface is zero, or
ch

that the magnetic field is a solenoidal vector field.

Faraday's law
oa

The Maxwell-Faraday's equation version of Faraday's law describes how a time varyingmagnetic
yC

field creates ("induces") an electric field.[3] This dynamically induced electric field has closed
field lines just as the magnetic field, if not superposed by a static (charge induced) electric field.
kM

This aspect of electromagnetic induction is the operating principle behind many electric
generators: for example, a rotating bar magnet creates a changing magnetic field, which in turn
ic

generates an electric field in a nearby wire.

.P

Ampère's law with Maxwell's addition

w

Ampère's law with Maxwell's addition states that magnetic fields can be generated in two ways:
w

by electrical current (this was the original "Ampère's law") and by changing electric fields (this
was "Maxwell's addition").
w

Maxwell's addition to Ampère's law is particularly important: it shows that not only does a
changing magnetic field induce an electric field, but also a changing electric field induces a
magnetic field.[3][4] Therefore, these equations allow self-sustaining "electromagnetic waves" to
travel through empty space (see electromagnetic wave equation).
The speed calculated for electromagnetic waves, which could be predicted from experiments on
charges and currents,[note 2] exactly matches the speed of light; indeed, light is one form

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

of electromagnetic radiation (as are X-rays, radio waves, and others). Maxwell understood the
connection between electromagnetic waves and light in 1861, thereby unifying the theories
of electromagnetism and optics.

Equation of continuity.
The continuity equation can be derived by taking the divergence of

 D 
 H  J
t
Where H is the magnetic field, in amperes per meter (A/m) and D is the electric flux density, in
coulombs per meter squared (Coul/m2).
And also using,   D   , we get

 J  0
t
This equation states that charge is conserved, or that current is continuous, since ∇ · J. represents

the outflow of current at a point, and represents the charge build up with time at the same
t

m
point. It is this result that led Maxwell to the conclusion that the displacement current density
D

co
was necessary in (1.1b), which
t g.
can be seen by taking the divergence of this equation.
in
Comcept of Displacement Current.
ch

In electromagnetism, displacement current is a quantity appearing in Maxwell's equations that is

oa

defined in terms of the rate of change of electric displacement field. Displacement current has the
units of electric current density, and it has an associated magnetic field just as actual currents do.
yC

However it is not an electric current of moving charges, but a time-varying electric field. In
materials, there is also a contribution from the slight motion of charges bound in
kM

atoms, dielectric polarization.

ic

The electric displacement field is defined as:

.P

D  0E  P
w
w

Where:
w

ε0 is the permittivity of free space

E is the electric field intensity
P is the polarization of the medium
Differentiating this equation with respect to time defines the displacement current density, which
therefore has two components in a dielectric:

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

E P
JD  0 
t t
The first term on the right hand side is present in material media and in free space. It doesn't
necessarily come from any actual movement of charge, but it does have an associated magnetic
field, just as does a current due to charge motion. Some authors apply the name displacement
current to the first term by itself.
The second term on the right hand side comes from the change in polarization of the individual
molecules of the dielectric material. Polarization results when the charges in molecules have
moved from a position of exact cancellation under the influence of an applied electric field. The
positive and negative charges in molecules separate, causing an increase in the state of
polarization P. A changing state of polarization corresponds to charge movement and so is
equivalent to a current.
This polarization is the displacement current as it was originally conceived by Maxwell.
Maxwell made no special treatment of the vacuum, treating it as a material medium. For
Maxwell, the effect of P was simply to change the relative permittivity εr in the
relation D = εrε0 E.
The modern justification of displacement current is explained below.

m
Isotropic dielectric case

co
In the case of a very simple dielectric material the constitutive relation holds:
D E
g.
in
where the permittivity ε = ε0 εr,
ch

 εr is the relative permittivity of the dielectric and

oa

 ε0 is the electric constant.

yC

In this equation the use of ε accounts for the polarization of the dielectric.
kM

The scalar value of displacement current may also be expressed in terms of electric flux:
E
ic

ID  
t
.P

The forms in terms of ε are correct only for linear isotropic materials. More generally ε may be
w

replaced by a tensor, may depend upon the electric field itself, and may exhibit frequency
w

dependence (dispersion).
w

For a linear isotropic dielectric, the polarization P is given by:

P   0 e E   0 ( r  1) E

Where  e is known as the electric susceptibility of the dielectric. Note that:

   r 0  (1  e ) 0

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

Electromagnetic Boundary Conditions:

1. Gauss‘ Continuity Condition
  0 E  da    S dS  0 ( E2n  E1n )dS   S dS

m
S
S

co
 0 ( E2 n  E1n )   S  n  [ 0 ( E2  E1 )]   S
g.
2. Continuity of Tangential E
in
ch
oa
yC
kM
ic
.P
w

 E  dS  ( E  E2t )dl  0 E1t  E2t  0

w

1t
C
w

n  (E1  E2 )  0 Equivalent to Φ1= Φ2 along boundary.

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

3. Normal H

  H  da  0
S
0

0 ( H an  H bn ) A  0
H an  H bn
n [H a  Hb ]  0

4. Tangential H

m
co
g.
in
ch
oa

d
 H  ds   J  da  dt   E  da0
yC

C S S

H bt ds  H at ds  Kds
kM

H bt  H at  K
n [H a  Hb ]  K
ic
.P

5. Conservation of Charge Boundary Condition

w
w

d
 J  da  dt   dV
w

S V


n  [Ja  Jb ]  S  0
t

Poynting’s Theorem:
The Poynting theorem is one of the most important results in EM theory. It tells us the power
flowing in an electromagnetic field.

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

John Henry Poynting was the developer and eponym of the Poynting vector, which describes the
direction and magnitude of electromagnetic energy flow and is used in the Poynting theorem, a
statement about energy conservation for electric and magnetic fields. This work was first
published in 1884. He performed a measurement of Newton's gravitational constant by
innovative means during 1893. In 1903 he was the first to realize that the Sun's radiation can
draw in small particles towards it. This was later coined the Poynting-Robertson effect.
B
 E  
t
D
 H  J 
t
From these we obtain
B
H  (  E)   H
t
D
E  (  H)  J  E  E
t
Subtract, and use the following vector identity:
H  ( E)-E  ( H)= (E  H)
We then have:

m
B D

co
 E
  (E H)   J  E H
t t g.
Next, assume that Ohm's law applies for the electric current:
J E
in
ch

B D
   (E H)   ( E  E)  H
 E
oa

t t
2 B D
   (E H)   E  H  E
yC

t t
From calculus (chain rule), we have that
kM

D  E  1 
E    E  ( E  E)
t  t  2 t
ic
.P

B  H 1 
H    H  (H H)
t  t  2 t
w

Hence we have
w

2 1  1 
w

  (E H)   E   (H H)   ( E  E)
2 t 2 t
This may be written as
2 1 2  1 2
  (E H)   E  (  H ) (  E )
t 2 t 2
Final differential (point) form of the Poynting theorem:

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

2  1 2  1 2
  (E H)   E  (  H ) (  E )
t 2 t 2
Time-Harmonic EM Fields:
In linear media the time-harmonic dependence of the sources gives rise to fields which, once
having reached the steady state, also vary sinusoidally in time. However, time-harmonic analysis
is important not only because many electromagnetic systems operate with signals that are
practically harmonic, but also because arbitrary periodic time functions can be expanded into
Fourier series of harmonic sinusoidal components while transient nonperiodic functions can be
expressed as Fourier integrals. Thus, since the Maxwell‘s equations are linear differential
equations, the total fields can be synthesized from its Fourier components.
Analytically, the time-harmonic variation is expressed using the complex exponential notation
based on Euler‘s formula, where it is understood that the physical fields are obtained by taking
the real part, whereas their imaginary part is discarded. For example, an electric field with time-
harmonic dependence given by cos(ωt + ϕ), where ω is the angular frequency, is expressed as
  1   
 
E  Re Ee jt  ( Ee jt  ( Ee jt )* )  E0 cos(t   )
2

where E is the complex phasor,
 
E  E0e j

m
of amplitude E0 and phase ϕ, which will in general be a function of the angular frequency and
coordinates. The asterisk * indicates the complex conjugate, and Re {} represents the real part of

co
what is in curly brackets. g.
Maxwell‘s equations for time-harmonic fields:
in
Assuming ejωt time dependence, we can get the phasor form or time-harmonic form of
ch

Maxwell‘s equations simply by changing the operator ∂/∂t to the factor jω in and eliminating the
factor ejωt. Maxwell‘s equations in differential and integral forms for time-harmonic fields are
oa

given below.
yC

Differential form of Maxwell‘s equations for time-harmonic fields


∇ · D = ρ (Gauss‘ law)
kM


∇ · D = ρ (Gauss‘ law)

ic

∇ · B = 0(Gauss‘ law for magnetic fields)

 
.P

∇× E = −jω B (Faraday‘s law)

  
∇× H = J + jω D (Generalized Ampère‘s law)
w
w

Integral form of Maxwell‘s equations for time harmonic fields:

w

 
 S   
D dS  QT (Gauss‘ Law)

 S B  dS

 0 (Gauss‘ Law for magnetic field)
 
  
E  dl   j

S  dS (Faraday‘s
B

Law)

 H  dl   ( J  j D)  dS (Generalised Ampere‘s Law)

 S

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

Plane Wave Propagation & Plane wave solution.

In the physics of wave propagation, a plane wave (also spelled planewave) is a constant-
frequency wave whose wavefronts(surfaces of constant phase) are infinite parallel planes of
constant peak-to-peak amplitude normal to the phase velocityvector.
It is not possible in practice to have a true plane wave; only a plane wave of infinite extent will
propagate as a plane wave. However, many waves are approximately plane waves in a localized
region of space. For example, a localized source such as an antenna produces a field that is
approximately a plane wave far from the antenna in its far-field region. Similarly, if thelength
scales are much longer than the wave‘s wavelength, as is often the case for light in the field
of optics, one can treat the waves as light rays which correspond locally to plane waves.
Mathematical formalisms:
Two functions that meet the above criteria of having a constant frequency and constant
amplitude are the sine and cosinefunctions. One of the simplest ways to use such
a sinusoid involves defining it along the direction of the x-axis. The equation below, which is
illustrated toward the right, uses the cosine function to represent a plane wave travelling in the
positive x direction.

m
co
g.
in
In the above equation:
ch

 A(x, t) is the magnitude or disturbance of the wave at a given point in space and time. An
oa

example would be to let A(x, t) represent the variation of air pressure relative to the norm in
the case of a sound wave.
yC

 A0 is the amplitude of the wave which is the peak magnitude of the oscillation.
kM

 k is the wave‘s wave number or more specifically the angular wave number and
equals 2π/λ, where λ is the wavelength of the wave.
ic

 k has the units ofradians per unit distance and is a measure of how rapidly the disturbance
.P

changes over a given distance at a particular point in time.

 x is a point along the x-axis. y and z are not part of the equation because the wave's
w

magnitude and phase are the same at every point on any giveny-z plane. This equation
w

defines what that magnitude and phase are.

w

  is the wave‘s angular frequency which equals 2π/T, where T is the period of the wave. 
has the units of radians per unit time and is a measure of how rapidly the disturbance
changes over a given length of time at a particular point in space.
 t is a given point in time
  is the phase shift of the wave and has the units of radians. Note that a positive phase shift,
at a given moment of time, shifts the wave in the negative x-axis direction. A phase shift
of 2π radians shifts it exactly one wavelength.

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

Other formalisms which directly use the wave‘s wavelength  , period T , frequency f
and velocity c are below.
A  A0 cos[2 ( x   t T )   ]
A  A0 cos[2 ( x   ft )   ]
A  A0 cos[(2  )( x  ct )   ]

To appreciate the equivalence of the above set of equations note that f  1 and c    
T T k
Arbitrary direction
A more generalized form is used to describe a plane wave traveling in an arbitrary direction. It
uses vectors in combination with the vector dot product.
A(r, t)  A0 cos(k r   t   )

here:

 k is the wave vector which only differs from a wave number in that it has a
direction as well as a magnitude. This means that, k  k  2  . The

m
direction of the wave vector is ordinarily the direction that the plane wave is

co
travelling, but it can differ slightly in an anisotropic medium.
 is the vector dot product.
g.
 r is the position vector which defines a point in three-dimensional space.
in
Complex exponential form
ch

Many choose to use a more mathematically versatile formulation that utilizes the complex
number plane. It requires the use of the natural exponent e and the imaginary number i .
oa

u(r, t)  A0 ei (k r  t  )
yC

To appreciate this equation‘s relationship to the earlier ones, below is this same equation
kM

expressed using sines and cosines. Observe that the first term equals the real form of the plane
wave just discussed.
ic

u(r, t)  A0 cos(k r   t   )  iA0 sin(k r   t   )

.P

u(r, t)  A(r, t)  iA0 sin(k r   t   )

w
w

The introduced complex form of the plane wave can be simplified by using a complex-valued
amplitude U 0 substitute the real valued amplitude A 0 .
w

Specifically, since the complex form…

u(r, t)  A0 ei (k r  t  )

equals
u(r, t)  A0 ei (k r  t) ei

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

one can absorb the phase factor ei into a complex amplitude by letting U 0  A0ei , resulting in
the more compact equation
U(r, t)  U 0ei (kr  t)

While the complex form has an imaginary component, after the necessary calculations are
performed in the complex plane, its real value can be extracted giving a real valued equation
representing an actual plane wave.
Re[U(r, t)]  A(r, t)  A0 cos(k r   t   )

The main reason one would choose to work with complex exponential form of plane waves is
that complex exponentials are often algebraically easier to handle than the trigonometric sines
and cosines. Specifically, the angle-addition rules are extremely simple for exponentials.
Additionally, when using Fourier analysis techniques for waves in a lossy medium, the
resulting attenuation is easier to deal with using complex Fourier coefficients. It should be noted
however that if a wave is traveling through a lossy medium, the amplitude of the wave is no
longer constant, and therefore the wave is strictly speaking no longer a true plane wave.
In quantum mechanics the solutions of the Schrödinger wave equation are by their very nature
complex and in the simplest instance take a form identical to the complex plane wave

m
representation above. The imaginary component in that instance however has not been

co
introduced for the purpose of mathematical expediency but is in fact an inherent part of the
―wave‖. g.
Helmholtz wave equation.
in
In a source-less dielectric medium,

ch

  DS  0

  BS  0
oa

  
  H S  j DS  j ES
yC

  
  ES   j BS   j H S
kM

Taking curl gives

 
  (  ES )    ( j H S )
ic

  
.P

 (  ES )   2 ES   j (  H S )
  
w

 (  ES )   2 ES   j ( j ES )

  
w

  2 ES  (  ES )   2  ES
  
w

  2 ES  0   2  ES

Similarly, it can be proved that

 
2 H S   2  ES
Finally, Let‘s Analyze the Helmholtz Wave Equation
Let‘s compare general wave equation (8) and Helmholtz wave equation

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

 2 FS  
2
  2 FS  0  2 ES   ES
x
From the above comparison, we get,
   
But, we already knew that

v

So, from the above equations, we get
1 1
v  c
 r  r
where c is the light velocity.

Plane Wave Propagation in lossless medium:

m
co
g.
in
ch
oa
yC
kM
ic
.P
w
w
w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

m
co
g.
in
ch
oa
yC
kM
ic
.P
w
w
w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

m
co
g.
in
ch
oa

Plane Wave Propagation in lossy dielectric medium:

yC
kM
ic
.P
w
w

A lossy dielectric is a medium in which an EM wave loses power as it propagates

w

due to poor conduction.

In other words, a lossy dielectric is a partially conducting medium (imperfect dielectric or

imperfect conductor) with a ¥= 0, as distinct from a lossless dielectric (perfect or good
dielectric) in which a = 0. Consider a linear, isotropic, homogeneous, lossy dielectric medium
that is charge free (pv = 0). Assuming and suppressing the time factor ej"', Maxwell's equations
become

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

  ES  0
  HS  0
  ES   j H S
  H S  (  j ) ES

Taking the curl of both sides of eq

Applying the vector identity

From the above equation we get that...

m
co
g.
in
ch
oa
yC
kM

and gama is called the propagation constant (in per meter) of the medium. By a similar
procedure, it can be shown that for the H field,
ic
.P
w
w
w

We will obtain a and /3 from eqs. by noting that

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

From the above equations , we obtain.

Without loss of generality, if we assume that the wave propagates along +az and that Es has only
an x- component, then

Substituting this into eq.

m
co
g.
in
ch
oa
yC
kM

This is a scalar wave equation, a linear homogeneous differential equation, with solution
ic
.P

where Eo and E'o are constants. The fact that the field must be finite at infinity requires that E'o
w

= 0. Alternatively, because eiz denotes a wave traveling along —az whereas we assume wave
w

propagation along az, E'o = 0. Whichever way we look at it, E'o = 0. Inserting the time factor
w

ejo" into eq. above, we obtain

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

A sketch of |E| at times t = 0 and t = At is portrayed in Figure 10.5, where it is evident that E has
only an x-component and it is traveling along the +z-direction. Having obtained E(z, t), we
obtain H(z, t) either by taking similar steps to solve eq. or by using eq. in conjunction with
Maxwell's equations, We will eventually arrive at

PLANE WAVES IN GOOD CONDUCTORS

A perfect, or good conductor, is one in which    so that  /   

Without loss of generality, if we assume that the wave propagates along +az and that Es has only
an x-component, then

m
co
g.
Substituting this
in
ch
oa
yC
kM
ic
.P

DEPTH OF PENETRATION:
w

Penetration depth is a measure of how deep light or any electromagnetic radiation can penetrate
w

into a material. It is defined as the depth at which the intensity of the radiation inside the material
falls to 1/e (about 37%) of its original value at (or more properly, just beneath) the surface.
w

When electromagnetic radiation is incident on the surface of a material, it may be (partly)

reflected from that surface and there will be a field containing energy transmitted into the
material. This electromagnetic field interacts with the atoms and electrons inside the material.
Depending on the nature of the material, the electromagnetic field might travel very far into the
material, or may die out very quickly. For a given material, penetration depth will generally be a
function of wavelength.

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

According to Beer-Lambert law, the intensity of an electromagnetic wave inside a material falls
off exponentially from the surface as

If denotes the penetration depth, we have

"Penetration depth" is but one term that describes the decay of electromagnetic waves inside a
material. The above definition refers to the depth at which the intensity or power of the field
decays to 1/e of its surface value. In many contexts one is concentrating on the field quantities
themselves: the electric and magnetic fields in the case of electromagnetic waves. Since the
power of a wave in a particular medium is proportional to the square of a field quantity, one may
speak of a penetration depth at which the magnitude of the electric (or magnetic) field has
decayed to 1/e of its surface value, and at which point the power of the wave has thereby
decreased to or about 13% of its surface value:

m
Note that is identical to the skin depth, the latter term usually applying to metals in reference

co
to the decay of electrical currents (which follow the decay in the electric or magnetic field due to
g.
a plane wave incident on a bulk conductor). The attenuation constant is also identical to the
in
(negative) real part of the propagation constant, which may also be referred to as using a
notation inconsistent with the above use. When referencing a source one must always be careful
ch

to note whether a number such as or refers to the decay of the field itself, or of the intensity
oa

(power) associated with that field. It can also be ambiguous as to whether a positive number
describes attenuation(reduction of the field) or gain; this is usually obvious from the context.
yC

The attenuation constant for an electromagnetic wave at normal incidence on a material is also
proportional to the imaginary part of the material's refractive index n. Using the above definition
kM

of (based on intensity) the following relationship holds:

ic
.P
w

where denotes the complex index of refraction, is the radian frequency of the radiation,
w

and c is the speed of light in vacuum. Note that is very much a function of frequency, as is
its imaginary part which is often not mentioned (it is essentially zero for transparent dielectrics).
w

The complex refractive index of metals is also infrequently mentioned but has the same
significance, leading to a penetration depth (or skin depth ) accurately given by
a formula which is valid up to microwave frequencies.
Relationships between these and other ways of specifying the decay of an electromagnetic field
are further detailed in the article: Mathematical descriptions of opacity.

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

It should also be noted that we are only specifying the decay of the field which may be due
to absorption of the electromagnetic energy in a lossy medium or may simply describe the
penetration of the field in a medium where no loss occurs (or a combination of the two). For
instance, a hypothetical substance may have a complex index of refraction .A
wave will enter that medium without significant reflection and will be totally absorbed in the
medium with a penetration depth (in field strength) of , where is the vacuum
wavelength. A different hypothetical material with a complex index of
refraction will also have a penetration depth of 16 wavelengths, however in this
case the wave will be perfectly reflected from the material! No actual absorption of the radiation
takes place, however the electric and magnetic fields extend well into the substance. In either
case the penetration depth is found directly from the imaginary part of the material's refractive
index as is detailed above.
Polarization of EM wave:
Polarization (also polarisation) is a property of waves that can oscillate with more than one
orientation. Electromagnetic waves such aslight exhibit polarization, as do some other types of
wave, such as gravitational waves. Sound waves in a gas or liquid do not exhibit polarization,
since the oscillation is always in the direction the wave travels.
In an electromagnetic wave, both the electric field and magnetic field are oscillating but in

m
different directions; by convention the "polarization" of light refers to the polarization of the
electric field. Light which can be approximated as a plane wave in free space or in

co
anisotropic medium propagates as a transverse wave—both the electric and magnetic fields are
g.
perpendicular to the wave's direction of travel. The oscillation of these fields may be in a single
direction (linear polarization), or the field may rotate at the optical frequency
in
(circular or elliptical polarization). In that case the direction of the fields' rotation, and thus the
ch

specified polarization, may be either clockwise or counter clockwise; this is referred to as the
wave's chirality or handedness.
oa

The most common optical materials (such as glass) are isotropic and simply preserve the
yC

polarization of a wave but do not differentiate between polarization states. However there are
important classes of materials classified as birefringent or optically active in which this is not the
kM

case and a wave's polarization will generally be modified or will affect propagation through it.
A polarizer is an optical filter that transmits only one polarization.
ic

Polarization is an important parameter in areas of science dealing with transverse wave

.P

propagation, such as optics, seismology, radio, and microwaves. Especially impacted are
technologies such as lasers, wireless and optical fiber telecommunications, and radar.
w

Linear polarization:
w

In electrodynamics, linear polarization or plane polarization of electromagnetic radiation is a

w

confinement of the electric field vector or magnetic field vector to a given plane along the
direction of propagation. See polarization for more information.
The orientation of a linearly polarized electromagnetic wave is defined by the direction of
the electric field vector. For example, if the electric field vector is vertical (alternately up and
down as the wave travels) the radiation is said to be vertically polarized.

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

The classical sinusoidal plane wave solution of the electromagnetic wave equation for
the electric and magnetic fields is (cgs units)

for the magnetic field, where k is the wavenumber,

m
is the angular frequency of the wave, and is the speed of light.

co
Here g.
in
is the amplitude of the field and
ch
oa
yC

is the Jones vector in the x-y plane.

The wave is linearly polarized when the phase angles are equal,
kM

.
ic

This represents a wave polarized at an angle with respect to the x axis. In that case, the Jones
.P

vector can be written

w
w
w

.
The state vectors for linear polarization in x or y are special cases of this state vector.
If unit vectors are defined such that

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

and

then the polarization state can written in the "x-y basis" as

Circular polarization:
circular polarization of an electromagnetic wave is a polarization in which the electric field of
the passing wave does not change strength but only changes direction in a rotary manner.
In electrodynamics the strength and direction of an electric field is defined by what is called
an electric field vector. In the case of a circularly polarized wave, as seen in the accompanying
animation, the tip of the electric field vector, at a given point in space, describes a circle as time
progresses. If the wave is frozen in time, the electric field vector of the wave describes a helix
along the direction of propagation.
Circular polarization is a limiting case of the more general condition of elliptical polarization.
The other special case is the easier-to-understand linear polarization.
The phenomenon of polarization arises as a consequence of the fact that light behaves as a two-

m
dimensional transverse wave.

co
The classical sinusoidal plane wave solution of the electromagnetic wave equation for
the electric and magnetic fields is
g.
in
ch
oa

where k is the wavenumber,

yC

is the angular frequency of the wave, is an orthogonal matrix whose

kM

columns span the transverse x-y plane and is the speed of light.
Here is the amplitude of the field and
ic
.P
w
w

is the Jones vector in the x-y plane.

w

If is rotated by radians with respect to and the x amplitude equals the y amplitude
the wave is circularly polarized. The Jones vector is

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

where the plus sign indicates left circular polarization and the minus sign indicates right circular
polarization. In the case of circular polarization, the electric field vector of constant magnitude
rotates in the x-y plane.
If basis vectors are defined such that

and

then the polarization state can be written in the "R-L basis" as

where

m
co
g.
and
in
ch

Elliptical polarization:
oa

In electrodynamics, elliptical polarization is the polarization of electromagnetic radiation such

yC

that the tip of the electric field vector describes an ellipse in any fixed plane intersecting,
and normal to, the direction of propagation. An elliptically polarized wave may be resolved into
kM

two linearly polarized waves in phase quadrature, with their polarization planes at right angles to
each other. Since the electric field can rotate clockwise or counterclockwise as it propagates,
ic

elliptically polarized waves exhibit chirality.

.P

Other forms of polarization, such as circular and linear polarization, can be considered to be
special cases of elliptical polarization.
w
w

The classical sinusoidal plane wave solution of the electromagnetic wave equation for
the electric and magnetic fields is (cgs units)
w

for the magnetic field, where k is the wavenumber,

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

is the angular frequency of the wave propagating in the +z direction, and is the speed of light.
Here is the amplitude of the field and

is the normalized Jones vector. This is the most complete representation of polarized
electromagnetic radiation and corresponds in general to elliptical polarization.

m
co
g.
in
ch
oa
yC
kM
ic
.P
w
w
w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

MODULE-IV

RADIO WAVE PROPAGATION

Introduction
Radio propagation is the behavior of radio waves when they are transmitted, or propagated from
one point on the Earth to another, or into various parts of the atmosphere. Radio signals are
affected in many ways by objects in their path and by the media through which they travel. This
means that radio signal propagation is of vital importance to anyone designing or operating a
radio system. The properties of the path by which the radio signals will propagate governs the
level and quality of the received signal. Reflection, refraction and diffraction may occur. The
resultant signal may also be a combination of several signals that have travelled by different
paths. These may add constructively or destructively, and in addition to this the signals travelling
via different paths may be delayed causing distorting of the resultant signal. It is therefore very

m
important to know the likely radio propagation characteristics that are likely to prevail.

co
g.
Mode of Propagation
in
There are a number of categories into which different types of radio propagation can be placed.
ch

These relate to the effects of the media through which the signals propagate.
oa

 Free space propagation: Here the radio signals travel in free space, or away from other
yC

objects which influence the way in which they travel. It is only the distance from the
source which affects the way in which the field strength reduces. This type of radio
kM

propagation is encountered with signals travelling to and from satellites.

ic

 Ground wave propagation: When signals travel via the ground wave they are modified
.P

by the ground or terrain over which they travel. They also tend to follow the earth's
w

curvature. Signals heard on the medium wave band during the day use this form of
w

propagation. Read more about Ground wave propagation

w

 Ionospheric propagation: Here the radio signals are modified and influenced by the
action of the free electrons in the upper reaches of the earth's atmosphere called the
ionosphere. This form of radio propagation is used by stations on the short wave bands
for their signals to be heard around the globe. Read more about Ionospheric propagation

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

 Tropospheric propagation: Here the signals are influenced by the variations of

refractive index in the troposphere just above the earth's surface. Tropospheric radio
propagation is often the means by which signals at VHF and above are heard over
extended distances. Read more about Tropospheric propagation

m
Sky Wave Propagation and Space Wave Propagation

co
g.
Layers of the Atmosphere
in
There are two main layers that are of interest from a radio communications viewpoint. The first
ch

is the troposphere that tends to affect radio frequencies above 30 MHz. The second is the
oa

ionosphere. This is a region which crosses over the boundaries of the meteorological layers and
yC

extends from around 60 km up to 700 km. Here the air becomes ionised, producing ions and free
electrons. The free electrons affect radio communications and radio signals at certain
kM

frequencies, typically those radio frequencies below 30 MHz, often bending them back to Earth
ic

so that they can be heard over vast distances around the world.
.P
w
w
w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

Atmosphere Layers

Structure of Troposphere

m
The lowest of the layers of the atmosphere is the troposphere. This extends from ground level to

co
an altitude of 10 km. It is within this region that the effects that govern our weather occur. To
give an idea of the altitudes involved it is found that low clouds occur at altitudes of up to 2 km
g.
whereas medium level clouds extend to about 4 km. The highest clouds are found at altitudes up
in
to 10 km whereas modern jet airliners fly above this at altitudes of up to 15 km.
ch

Within the troposphere there is generally a steady fall in temperature with height and this has a
oa

distinct bearing on some radio propagation modes and radio communications that occur in this
region. The fall in temperature continues in the troposphere until the tropopause is reached. This
yC

is the area where the temperature gradient levels out and then the temperature starts to rise. At
this point the temperature is around -50ᵒC.
kM

The refractive index of the air in the troposphere plays a dominant role in radio signal
ic

propagation and the radio communications applications that use tropospheric radiowave
propagation. This depends on the temperature, pressure and humidity. When radio
.P

communications signals are affected this often occurs at altitudes up to 2 km.

w

Tropospheric Scattering
w
w

Tropospheric scatter (also known as troposcatter) is a method of communicating

with microwave radio signals over considerable distances – often up to 300 km, and further
depending on terrain and climate factors. This method of propagation uses the tropospheric
scatter phenomenon, where radio waves at particular frequencies are randomly scattered as they
pass through the upper layers of thetroposphere. Radio signals are transmitted in a tight beam

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

aimed at the highest point on the horizon in the direction of the receiver station. As the signals
pass through the troposphere, some of the energy is scattered back toward the Earth, allowing the
receiver station to pick up the signal.[1]

Tropospheric Scattering

Normally, signals in the microwave frequency range used, around 2 GHz, travel in straight lines,

m
and so are limited to line of sight applications, in which the receiver can be 'seen' by the

co
transmitter. So communication distances are limited by the visual horizon to around 30-40 miles.
g.
Troposcatter allows microwave communication beyond the horizon.
in
Because the troposphere is turbulent and has a high proportion of moisture the tropospheric
ch

scatter radio signals are refracted and consequently only a proportion of the radio energy is
oa

collected by the receiving antennas. Frequencies of transmission around 2 GHz are best suited
for tropospheric scatter systems as at this frequency the wavelength of the signal interacts well
yC

with the moist, turbulent areas of the troposphere, improving signal to noise ratios.
kM

Ionosphere
The ionosphere /aɪˈɒnɵˌsfɪər/ is a region of Earth's upper atmosphere, from about 85 km (53 mi)
ic
.P

to 600 km (370 mi) altitude, and includes the thermosphere and parts of
w

themesosphere and exosphere. It is distinguished because it is ionized by solar radiation. It plays

w

an important part in atmospheric electricity and forms the inner edge of themagnetosphere. It has
w

practical importance because, among other functions, it influences radio propagation to distant
places on the Earth.

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

m
Ionization Layes
co
g.
Ionospheric Layers - D, E, F1, F2
in
At night the F layer is the only layer of significant ionization present, while the ionization in the
ch

E and D layers is extremely low. During the day, the D and E layers become much more heavily
oa

ionized, as does the F layer, which develops an additional, weaker region of ionisation known as
yC

the F1 layer. The F2 layer persists by day and night and is the region mainly responsible for the
refraction of radio waves.
kM
ic
.P
w
w
w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

Ionization Layers during Day and Night

D layer

m
The D layer is the innermost layer, 60 km (37 mi) to 90 km (56 mi) above the surface of the

co
Earth. Ionization here is due to Lyman series-alpha hydrogen radiation at a wavelength of
g.
121.5 nanometre (nm) ionizing nitric oxide (NO). In addition, with high Solar activity hard X-
in
rays (wavelength < 1 nm) may ionize (N2, O2). During the night cosmic rays produce a residual
ch

amount of ionization. Recombination is high in the D layer, so the net ionization effect is low,
oa

but loss of wave energy is great due to frequent collisions of the electrons (about ten collisions
yC

every millisecond). As a result, high-frequency (HF) radio waves are not reflected by the D layer
but suffer loss of energy therein. This is the main reason for absorption of HF radio waves,
kM

particularly at 10 MHz and below, with progressively smaller absorption as the frequency gets
ic

higher. The absorption is small at night and greatest about midday. The D layer reduces greatly
.P

after sunset; a small part remains due to [galactic cosmic rays]. A common example of the D
w

layer in action is the disappearance of distant AM broadcast band stations in the daytime.
w
w

E layer

The E layer is the middle layer, 90 km (56 mi) to 120 km (75 mi) above the surface of the Earth.
Ionization is due to soft X-ray (1-10 nm) and far ultraviolet (UV) solar radiation ionization of
molecular oxygen (O₂). Normally, at oblique incidence, this layer can only reflect radio waves
having frequencies lower than about 10 MHz and may contribute a bit to absorption on

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

frequencies above. However, during intense Sporadic E events, the Es layer can reflect
frequencies up to 50 MHz and higher. The vertical structure of the E layer is primarily
determined by the competing effects of ionization and recombination. At night the E layer
weakens because the primary source of ionization is no longer present. After sunset an increase
in the height of the E layer maximum increases the range to which radio waves can travel by
reflection from the layer.

F layer

The F layer or region, also known as the Appleton-Barnett layer, extends from about 200 km
(120 mi) to more than 500 km (310 mi) above the surface of Earth. It is the densest point of the
ionosphere, which implies signals penetrating this layer will escape into space. At higher
altitudes, the number of oxygen ions decreases and lighter ions such as hydrogen and helium
become dominant; this layer is the topside ionosphere. There, extreme ultraviolet (UV, 10–
100 nm) solar radiation ionizes atomic oxygen. The F layer consists of one layer at night, but
during the day, a deformation often forms in the profile that is labeled F₁. The F₂ layer remains

m
by day and night responsible for most skywavepropagation of radio waves, facilitating high

co
frequency (HF, or shortwave) radio communications over long distances.
SKY WAVE PROPAGATION
g.
in
Introduction
ch

In radio communication, skywave or skip refers to the propagation of radio

oa

waves reflected or refracted back toward Earth from theionosphere, an electrically charged layer
of the upper atmosphere. Since it is not limited by the curvature of the Earth, skywave
yC

propagation can be used to communicate beyond the horizon, at intercontinental distances. It is

kM

mostly used in the shortwavefrequency bands.

ic
.P
w
w
w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

Sky Wave Propagation

m
co
g.
in
ch
oa
yC
kM

Shortwave communication through sky wave communication

ic

Propagation of radio waves through Ionosphere

.P

As electromagnetic waves, and in this case, radio signals travel, they interact with objects and the
w

media in which they travel. As they do this the radio signals can be reflected, refracted or
w

diffracted. These interactions cause the radio signals to change direction, and to reach areas
w

which would not be possible if the radio signals travelled in a direct line. The ionosphere is a
particularly important region with regards to radio signal propagation and radio communications
in general. Its properties govern the ways in which radio communications, particularly in the HF
radio communications bands take place.
The ionosphere is a region of the upper atmosphere where there are large concentrations of free
ions and electrons. While the ions give the ionosphere its name, but it is the free electrons that
affect the radio waves and radio communications. In particular the ionosphere is widely known

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

for affecting signals on the short wave radio bands where it "reflects" signals enabling these
radio communications signals to be heard over vast distances. Radio stations have long used the
properties of the ionosphere to enable them to provide worldwide radio communications
coverage. Although today, satellites are widely used, HF radio communications using the
ionosphere still plays a major role in providing worldwide radio coverage. The free electrons do
not appear over the whole of the atmosphere. Instead it is found that the number of free electrons
starts to rise at altitudes of approximately 30 km. However it is not until altitudes of around 60 to
90 kilometres are reached that the concentration is sufficiently high to start to have a noticeable
effect on radio signals and hence on radio communications systems. It is at this level that the
ionosphere can be said to start.
The ionisation in the ionosphere is caused mainly by radiation from the Sun. In addition to this,
the very high temperatures and the low pressure result in the gases in the upper reaches of the
atmosphere existing mainly in a monatomic form rather than existing as molecules. At lower
altitudes, the gases are in the normal molecular form, but as the altitude increases the monatomic
forms are more in abundance, and at altitudes of around 150 kilometres, most of the gases are in
a monatomic form. This is very important because it is found that the monatomic forms of the

m
gases are very much easier to ionise than the molecular forms.

co
g.
Effect of earth‘s magnetic field
in
As an ionized medium, the ionosphere plays a special role in radio wave propagation.
ch

The Martian ionosphere differs from Earth‘s in a number of ways. Due to the greater distance
oa

from the Sun at Mars than Earth, the weaker solar radiation flux generates a lower plasma
yC

density in the Martian ionosphere. While Earth‘s ionosphere has four layers, the Martian
ionosphere is a single layer of ionized gas that extends from about 100 kilometers to several
kM

hundred kilometers above the surface, as shown in Figure 2.2-1 from Viking Lander 2 direct
ic

measurements. Earth‘s ionosphere is shielded from the solar wind by a strong planetary magnetic
.P

field. In contrast, the Mars ionosphere is directly exposed to the solar wind because Mars lacks a
w

strong magnetic field. Presence of a magnetic field can influence the plasma motion within the
w

ionosphere and also affect low frequency radio wave propagation.

w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

m
co
g.
A Martian Ionospheric Altitude Profile of Electron Density
in
Previous missions made inconclusive measurements of the Martian magnetic field. The weak
ch

magnetic field (< 100 nT) measured by the previous missions had been interpreted as the
oa

evidence for a Martian magnetic field , although argued that the measurements could be better
yC

explained in terms of a draped interplanetary magnetic field (IMF). Recent measurements by the
Mars Global Surveyor (MGS) mission have confirmed that there is no intrinsic dipole magnetic
kM

field in Mars. The MGS magnetometer discovered that the Martian magnetic field is very weak
ic

compared to that of Earth‘s magnetic field, only 1/800 the strength. The weak magnetic field is
.P

probably generated by a diffused draping IMF. The solar wind rams into the Martian ionosphere
w

and generates complicated magnetic fields. Thus, this region may have a complicated interaction
w

with the Martian magnetosphere.

w

Virtual height
Since the ionosphere have different types of layers namely D,E and F layers. So when a pulse
transmitted from transmitter it get deflected or we can say reflect by these different layers and
reaches to the receiver. Thus the path followed by the pulse is the Actual path.
The distance between the highest point of actual path and the earth surface is called Actual

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

height. When a short pulse of energy sent vertically upward and traveling with the speed of light
would reach taking the same two rays travel time as does the actual pulse reflected from the
ionospheric layers. that height is known as Virtual height of an antenna.

m
Virtual Height co
g.
Skip Distance
in
ch

A skip distance is the distance a radio wave travels, usually including a hop in the ionosphere. A
skip distance is a distance on the Earth's surface between the two points whereradio waves from
oa

a transmitter, refracted downwards by different layers of the ionosphere, fall. It also represents
yC

how far a radio wave has travelled per hop on the Earth's surface, for radio waves such as
kM

the short wave (SW) radio signals that employ continuous reflections for transmission.
Radio waves from a particular transmitting antenna do not all get refracted by a particular
ic

layer of the ionosphere; some are absorbed, some refracted while a portion escapes to the next
.P

layer. At this higher layer, there is a possibility of this radio wave being bent downwards to earth
w
w

again. This bending happens because each layer of the ionosphere has a refractive index that
w

varies from that of the others.[2]Because of the differing heights of refraction, or apparent
reflection, the radio waves hit the earth surface at different points hence generating the skip
distance.

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

Skip distance for space wave propagation

Critical frequency

In telecommunication, the term critical frequency has the following meanings:

 In radio propagation by way of the ionosphere, the limiting frequency at or below which a
wave component is reflected by, and above which it penetrates through, an ionospheric layer.
 At near vertical incidence, the limiting frequency at or below which incidence, the wave
component is reflected by, and above which it penetrates through, an ionospheric layer.

m
Critical Frequency changes with time of day, atmospheric conditions and angle of fire of the

co
radio waves by antenna. g.
The existence of the critical frequency is the result of electron limitation, i.e., the inadequacy of
in
the existing number of free electrons to support reflection at higher frequencies.
ch

When the refractive index, n has decreased to the point where n = sinϕi, where ϕ is the angle of
refraction f will be 90° and wave will be travelling horizontally. The higher point reached by the
oa

wave is free. The electron density N at the that point satisfies the relation
sin  i sin  i 81N max
yC

n   sin  i  1  …. (1)
sin  r sin 90 f 2 muf
kM

f 2c  81N max …. (2)

ic

Where f c is the critical frequency

.P

(Maximum Usable Frequency) MUF

w

In radio transmission maximum usable frequency (MUF) is the highest radio frequency that
w
w

can be used for transmission between two points via reflection from the ionosphere( skywave or
"skip" propagation) at a specified time, independent of transmitter power. This index is
especially useful in regard to shortwave transmissions. In shortwave radio communication, a
major mode of long distance propagation is for the radio waves to reflect off the ionized layers of

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

Maximum Usable Frequency

the atmosphere and return diagonally back to Earth. In this way radio waves can travel beyond
the horizon, around the curve of the Earth. However the refractive index of the ionosphere
decreases with increasing frequency, so there is an upper limit to the frequency which can be
used. Above this frequency the radio waves are not reflected by the ionosphere but are

m
transmitted through it into space.

co
g.
in
…(3)
ch

f 2c
 f 2c sec2  i
oa

2
f muf 
cos 2  i … (4)
yC

f muf  f c sec2  i
kM

The above equation is known as secant law, it indicates that f muf is greater than critical frequency

by a factor of secϕ. It gives the frequency which can be used for sky wave propagation for given
ic

angle of incidence between two locations.

.P
w
w
w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

Maximum Usable Frequency at different day and night time

SPACE WAVE PROPAGATION

Introduction: The radio waves having high frequencies are basically called as space waves.

m
These waves have the ability to propagate through atmosphere, from transmitter antenna to

co
receiver antenna. These waves can travel directly or can travel after reflecting from earth‘s
g.
surface to the troposphere surface of earth. So, it is also called as Tropospherical Propagation. In
in
the diagram of medium wave propagation, c shows the space wave propagation. Basically the
ch

technique of space wave propagation is used in bands having very high frequencies. E.g. V.H.F.
oa

band, U.H.F band etc. At such higher frequencies the other wave propagation techniques like sky
wave propagation, ground wave propagation can‘t work. Only space wave propagation is left
yC

which can handle frequency waves of higher frequencies. The other name of space wave
kM

propagation is line of sight propagation. There are some limitations of space wave propagation.
ic

1. These waves are limited to the curvature of the earth.

.P

2. These waves have line of sight propagation, means their propagation is along the line of sight
w

distance.
w

The line of sight distance is that exact distance at which both the sender and receiver antenna are
w

in sight of each other. So, from the above line it is clear that if we want to increase the
transmission distance then this can be done by simply extending the heights of both the sender as
well as the receiver antenna. This type of propagation is used basically in radar and television
communication.

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com
 Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com

The frequency range for television signals is nearly 80 to 200MHz. These waves are not reflected
by the ionosphere of the earth. The property of following the earth‘s curvature is also missing in
these waves. So, for the propagation of television signal, geostationary satellites are used. The
satellites complete the task of reflecting television signals towards earth. If we need greater
transmission then we have to build extremely tall antennas.

Space wave Communication

m
Space Waves, also known as direct waves, are radio waves that travel directly from the

co
transmitting antenna to the receiving antenna. In order for this to occur, the two antennas must be
g.
able to ―
see‖ each other; that is there must be a line of sight path between them. The diagram on
in
the next page shows a typical line of sight. The maximum line of sight distance between two
ch

antennas depends on the height of each antenna.

oa

Generally, space waves are ―

line of sight‖ receivable, but those of lower frequencies will ―
bend‖
over the horizon somewhat. Since the VOR signal at 108 to 118 MHz is a lower frequency than
yC

distance measuring equipment (DME) at 962 to 1213 MHz, when an aircraft is flown ― over the
horizon‖ from a VOR/DME station, the DME will normally be the first to stop functioning.
kM
ic
.P
w
w
w

Get Discount Coupons for your Coaching Institute and FREE Study Material at www.PickMyCoaching.com