Scribd
Upload
3 views

Assignment 2

The document outlines an assignment with four questions related to flyback and forward converters, each requiring calculations of output voltage, inductor currents, and output voltage ripple based on given parameters. Each question specifies different values for voltage, duty cycle, transformer turns ratio, resistance, inductance, capacitance, and switching frequency. The assignment is designed to assess understanding of converter operation and circuit analysis.

Uploaded by

bhavsarabhishek999
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
3 views

Assignment 2

The document outlines an assignment with four questions related to flyback and forward converters, each requiring calculations of output voltage, inductor currents, and output voltage ripple based on given parameters. Each question specifies different values for voltage, duty cycle, transformer turns ratio, resistance, inductance, capacitance, and switching frequency. The assignment is designed to assess understanding of converter operation and circuit analysis.

Uploaded by

bhavsarabhishek999
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

APE Assignment-2

Total Marks 8
Questions
1. The flyback converter has parameters Vs = 36 V, D = 0.4, N1/N2 = 2, R = 20 Ω, Lm =100
µH, and C = 50 µF, and the switching frequency is 100 kHz. Determine (a) the output
voltage; (b) the average, maximum, and minimum inductor currents; and (c) the output
voltage ripple (d) Sketch and label the waveform of iLm, is, id, ic and v1. [2]
2. The flyback converter has parameters Vs= 4.5 V, D = 0.6, N1/N2 = 0.4, R = 15 Ω, Lm = 10
µH, and C = 10 µF, and the switching frequency is 250 kHz. Determine (a) the output
voltage; (b) the average, maximum, and minimum inductor currents; and (c) the output
voltage ripple. [1]
3. The forward converter has parameters Vs = 100 V, N1/N2 = 5, N1/N3 = 1, Lm = 333 µH, R =
2.5 Ω, C = 10 µF, and D = 0.25, and the switching frequency is 375 kHz. (a) Determine
the output voltage and output voltage ripple. (b) Sketch the currents iLx, I1, i2, i3, iLm, and is.
Determine the power returned to the source by the tertiary (third) transformer winding from
the recovery storage energy in Lm. [3]
4. The forward converter has parameters Vs =100 V, N1/N2 = N1/N3 = 1, Lm = 1 mH, Lx = 70
µH, R = 20 Ω, C =33µF, and D = 0.35, and the switching frequency is 150 kHz. Determine
(a) the output voltage and output voltage ripple; (b) the average, maximum, and minimum
values of the current in Lx; (c) the peak current in Lm in the transformer model; and (d) the
peak current in the switch and the physical transformer primary. [2]

You might also like