Scribd
Upload
2 views

Assignment 4

The document outlines an assignment consisting of five questions related to Zero-current and Zero-voltage Resonant Switch Converters, each worth 5 marks. It requires calculations for output voltage, switching frequency, and component values based on given parameters such as input voltage, load current, inductance, and capacitance. The assignment emphasizes understanding resonant converter operation and performance under varying conditions.

Uploaded by

bhavsarabhishek999
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
2 views

Assignment 4

The document outlines an assignment consisting of five questions related to Zero-current and Zero-voltage Resonant Switch Converters, each worth 5 marks. It requires calculations for output voltage, switching frequency, and component values based on given parameters such as input voltage, load current, inductance, and capacitance. The assignment emphasizes understanding resonant converter operation and performance under varying conditions.

Uploaded by

bhavsarabhishek999
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

APE Assignment-4 (part 2)

Total Marks 10
Ref:- Lecture slides for Assignment-4 (part 1, 5 Marks)
Questions (1*5 Marks)
Zero-current Resonant Switch Converter

1. In the converter of Vs =10 V, Io = 5 A, Lr = 1 µH, Cr = 0.3 µF, and fs = 150 kHz. Determine
the output voltage of the converter. Determine the new switching frequency required if the
load current is changed to 3 A.
2. In the converter, Vs = 18 V, Io = 3 A, Lr = 0.5 µH, and Cr = 0.7 µF. Determine the maximum
switching frequency and the corresponding output voltage. Determine the switching
frequency such that the output voltage is 5 V.
3. In the converter, Vs = 50 V, Io = 3 A, ω0 = 7(107) rad/s, and Vo = 36 V. Determine Lr and
Cr such that the maximum current in Lr is 9 A. Determine the required switching frequency.

Zero-voltage Resonant Switch Converter

4. If, Vs = 20 V, Lr = 0.1 µH, Cr = 1 nF, Io = 10 A, and fs = 2 MHz. Determine the output


voltage and the maximum capacitor voltage and maximum inductor current.
5. If, Vs = 12 V, Lr = 0.5 µH, Cr = 0.01 µF, and Io = 10 A. (a) Determine the output voltage
when fs = 500 kHz. (b) The load current Io is expected to vary between 8 and 15 A.
Determine the range of switching frequency necessary to regulate the output voltage at 5
V.

You might also like