MVGP1 WIRELESS GAME CONTROL INSTRUCTION MANUAL

(For use with select Advent and Audiovox Headrest and Overhead Products)

REMOTE CONTROL WITH WIRELESS GAME CONTROL OPERATION

Battery Installation

Before attempting to operate your remote control, install the batteries

as described below:
1. Turn the game controller face down. Using your finger, lift the battery
cover tab and remove the cover.
2. Install three “AAA” batteries. Make sure that proper polarity
(+ or -) is observed.
3. Align the cover tab with the game controller and press down on the
cover tab until the cover locks.

WIRELESS GAME CONTROLLER FUNCTIONAL DESCRIPTION

BACK

UP
UP B
B

TB
B TB
TB

RIGHT
LEFT
RIGHT
LEFT

TA

A
DIRECTION TA TA SELECT START
A

SELECT START
DOWN
BUTTONS DOWN
A
LED-POWER
INDICATOR P2
P1

SELECT START

1. U
 se the START button to enter the games list (1-54). Then use the direction buttons to move the arrow to the desired
game. Press the START button to select the game. Use the SELECT button to exit to the game list.
2. A Key: “A Function Key” activates the jump function and optional weapons.
3. B Key: “ B Function Key” activates the fire and attack functions.
4. TA Key: TURBO “A” Function Key.
5. TB Key: TURBO “B” Function Key.
6. BACK Key: The Back key is used to return to the previous page. While playing a game pressing the Back button will
return to the games list. Pressing the Back button again will return to the games main page “54 Arcade Games”.
7. Press the START button to begin the game. Press the START button again at any time to pause the game.

There are 54 games in the games list to choose from and 6 are for two players.

One-Player
The games can be selected from either the M1 monitor or the M2 monitor. Whichever viewer selects the game source
becomes Player 1 (and uses the P1 controller)

Two-Players
When there are two players, the first user to select the game source uses the P1 controller. Player 2 uses the P2
controller. The P1 controller is used for game selection. P2 controller can select a game but the game can only be
started by pressing the START button on P1 controller.
128-9188
INSTALLATION OF MVGP1 (GAME MODULE PACKAGE)

HR7012M / HR7012S HR7012M / HR7012S

Master Monitor S P
Satellite Monitor
S

Connect to external source such

as Blu-ray player, game console 112-4208 112-4209 112-4210 112-4211
or multi-media head unit.

YELLOW
12 Pin AV Adapter Cable

BLUE
GREEN RED

2 PIN DC POWER CABLE

DC
IN

AV Input
AV Output
INTERFACE BOX
FM ANTENNA

OPTIONAL OPTIONAL MVGP1 (GAME PACKAGE)

Relay Box MVGP1

FMDIRB
GAME MODULE

Relay Box for wireless FM MOD

*
See antenna note below
See the instructions supplied with the SIRSWB for installation. * Use the attached double sided tape on the game module to secure
the game module to the interface box.

ADVEXL10 / VODEXL10

Screw

GAME
MODULE

Screw

Plug 8 Pin Connector Here

128-9188