Scribd
Upload
19 views1 page

Geometry Sectional Area Bending: H (MM) B (MM) T (MM) T (MM) H (MM) R (MM) D (MM) A (CM) I (CM) I (CM) I (CM) I (MM)

The document provides specifications for Medium Wide I-Beams with Parallel Flange Surfaces, specifically detailing the IPE series from IPE 80 to IPE 270. It includes dimensions such as height, width, flange thickness, and various sectional properties like bending area and moment of inertia. Each IPE section is listed with its corresponding measurements in millimeters and relevant mechanical properties.

Uploaded by

Rim Kammoun
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
19 views1 page

Geometry Sectional Area Bending: H (MM) B (MM) T (MM) T (MM) H (MM) R (MM) D (MM) A (CM) I (CM) I (CM) I (CM) I (MM)

The document provides specifications for Medium Wide I-Beams with Parallel Flange Surfaces, specifically detailing the IPE series from IPE 80 to IPE 270. It includes dimensions such as height, width, flange thickness, and various sectional properties like bending area and moment of inertia. Each IPE section is listed with its corresponding measurements in millimeters and relevant mechanical properties.

Uploaded by

Rim Kammoun
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

IPE

 DIN 1025-5:1994-03; Euronorm 19-57


 --

IPE b

Medium Wide I-Beams with Parallel Flange Surfaces r1

tf
h
y
tw

Sectional
Geometry Bending
Area

h b tw tf hi r1 d A Iy Iz Ip iy
Section
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [cm2] [cm4] [cm4] [cm4] [mm]

IPE 80 80.0 46.0 3.8 5.2 69.6 5.0 59.6 7.64 80.14 8.49 88.63 32.4

IPE 100 100.0 55.0 4.1 5.7 88.6 7.0 74.6 10.32 171.00 15.92 186.92 40.7

IPE 120 120.0 64.0 4.4 6.3 107.4 7.0 93.4 13.21 317.80 27.67 345.47 49.0

IPE 140 140.0 73.0 4.7 6.9 126.2 7.0 112.2 16.43 541.20 44.92 586.12 57.4

IPE 160 160.0 82.0 5.0 7.4 145.2 9.0 127.2 20.09 869.30 68.31 937.61 65.8

IPE 180 180.0 91.0 5.3 8.0 164.0 9.0 146.0 23.95 1317.00 100.90 1417.90 74.2

IPE 200 200.0 100.0 5.6 8.5 183.0 12.0 159.0 28.48 1943.00 142.40 2085.40 82.6

IPE 220 220.0 110.0 5.9 9.2 201.6 12.0 177.6 33.37 2772.00 204.90 2976.90 91.1

IPE 240 240.0 120.0 6.2 9.8 220.4 15.0 190.4 39.12 3892.00 283.60 4175.60 99.7

IPE 270 270.0 135.0 6.6 10.2 249.6 15.0 219.6 45.95 5790.00 419.90 6209.90 112.3
1/10

You might also like