MATRIX™

MK II+ E
innova.no
Part number: 6011300

The Matrix is a stand-alone fibre optic Key features

multiplexer and control solution. A plug and
play interface for remotely operated systems, • 5 additional 100 Mbps Ethernet
supporting a large array of sensors and
equipment. • C1 and C2 now with trigger

• Web based control interface

The system consists of a compact,
one-atmospheric subsea unit rated for 3000 m, • Software resettable fuses
and a 19" rack-mounted topside unit with touch
screen featuring status for all channels. • Highly configurable in software

The Matrix’s internal control system provides

individual 2-pole switching of all power outputs
as well as DC power insulation monitoring. The
DC power outputs are equipped with software
resettable fuses to save operation time. All DC
power outputs are equipped with voltage and
current monitoring, which is also displayed in the
topside controller.

Last modified: August 6 2024

Note: We accept no liability for any printing errors or changes in specification.
 TOPSIDE CONNECTORS

Type Communication Power

‚ 7" Linux based touch screen interface for control and C1 5506-2021 1 Gbps Ethernet, 24 / 48 VDC (6 A)
diagnostics
RS232, Trigger Ch. 1*, (SW switchable)
‚ Status for all channels on screen
Sync with C2
‚ Voltage and current monitoring
C2 5506-2021 1 Gbps Ethernet, 24 / 48 VDC (6 A)
‚ Alarm / warning logging
RS232, Trigger Ch. 1*, (SW switchable)
‚ Operational hours logged
Sync with C1
‚ Web browser based interface for mirrored control
C3 5506-2021 2 x 100 Mbps Ethernet, 24 VDC (6 A)
‚ Ethernet connection for control
RS232 / RS485 Optional: 48 VDC (3 A)
‚ 19" 3U rack mount
(SW switchable), (HW switchable)
‚ Weight: 8 kg
Trigger Ch. 1*
C4 455-L-FCR-75 Ω Camera 1 (HD-SDI), 24 VDC (2 A)
RS232
POWER INPUT
C5 455-L-FCR-75 Ω Camera 2 (HD-SDI), 24 VDC (2 A)
RS232
Subsea:
· 85 - 264 VAC / 120 - 300 VDC C6 455-L-FCR-75 Ω Camera 3 (HD-SDI), 24 VDC (2 A)
· 47 - 63 Hz
RS232
Topside:
· 90 - 265 VAC C7 MCBH8F 100 Mbps Ethernet 24 VDC (2 A)
· 47 - 63 Hz
C8 MCBH8F 100 Mbps Ethernet 24 VDC (2 A)
C9 MCBH8F 100 Mbps Ethernet, 24 VDC (2 A)
POWER OUTPUT Trigger Ch. 2**

C10 MCBH8F 100 Mbps Ethernet, 24 VDC (2 A)

‚ Software resettable fuses on DC power output Trigger Ch. 2**
‚ 2 x 24/48 VDC (6 A), SW switchable
C11 MCBH8F 100 Mbps Ethernet 24 VDC (2 A)
‚ 1 x 24 VDC (6 A) fixed output. Optional: 48 VDC (3 A)
C12 MCBH6F RS232 =Input voltage,
‚ 10 x 24 VDC (2 A) outputs 2-pole relay
AC only (2 A)
‚ 1 x 110 VAC 2-pole relay output (glass fused)
‚ 1050 W available DC power C13 MCBH8F RS232 / RS485 24 VDC (2 A)
(SW switchable)

C14 MCBH8F RS232 / RS485 24 VDC (2 A)

SIGNAL INTERFACE
(SW switchable)

‚ 6 x RS232 Fibre 472-G-BCR, SM Topside <-> Subsea

‚ 3 x Software switchable RS232 / RS485 (OPT-G4-BCR,SM) (Opt. Shilling fibre int.)
‚ 2 x 1 Gbps Ethernet
‚ 7 x 100 Mbps Ethernet Power G5506-2006 85-264 VAC (47-63 Hz)
‚ 3 x HD-SDI 120-300 VDC
‚ 2 x 5 V trigger
*Trigger Ch. 1 is shared between C1, C2 and C3.
‚ All serial and trigger interfaces are isolated **Trigger Ch. 2 is shared between C9 and C10
‚ Optional: 3 x analog video instead of 3 x digital video

OTHER
MECHANICAL PROPERTIES
‚ Two-stage noise attenuation filter on power input
‚ Material: Aluminium 6082-T6, hard anodized or ‚ Humidity sensor subsea
Titanium Grade 5 ‚ Temperature sensor topside and subsea
‚ Dimensions: Ø 230 mm (223 mm in centre), ‚ DC ground fault detection system
L 596 mm (Alu) & L 584 mm (Ti) ‚ Fibre and SFP diagnostics
‚ Weight Canister: 35 kg (air), 13 kg (sea) ‚ Control board diagnostics
‚ Depth rating: 3000 msw (Alu) & 5000 msw (Ti) ‚ Water ingress detection
‚ Shock and vibration: According to ISO 13628-6 innova.no
[email protected]
Last modified: August 6, 2024
Note: We accept no liability for any printing errors or changes in specification.
+47 51 96 17 00