Scribd
Upload
22 views10 pages

TURN ON AUX-important

The document provides installation instructions for integrating smartphone and camera features into Mercedes vehicles with the NTG 4.5 system, emphasizing the need to activate the AUX function for audio. It includes steps for connecting various components, adjusting microphone settings, and troubleshooting common issues such as sound problems and connectivity with Carplay. Additionally, it outlines specific wiring requirements for aftermarket reverse cameras based on the vehicle's transmission type.

Uploaded by

ytachmadamin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
22 views10 pages

TURN ON AUX-important

The document provides installation instructions for integrating smartphone and camera features into Mercedes vehicles with the NTG 4.5 system, emphasizing the need to activate the AUX function for audio. It includes steps for connecting various components, adjusting microphone settings, and troubleshooting common issues such as sound problems and connectivity with Carplay. Additionally, it outlines specific wiring requirements for aftermarket reverse cameras based on the vehicle's transmission type.

Uploaded by

ytachmadamin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

27-876— MERCEDES NTG4.

5
TURN ON AUX—important
The AUX in function on the car must be activated for the Audio to work on this interface. The Driver of the car must select AUX when using CARPLAY or
Android Auto.
To activate AUX you need to access the ENGINEERING MENU . (Utube video to activate AUX for NTG4.5: https://youtu.be/_ye5OO6r1lY )
Alternatively if the car has USB or Music interface connector for audio you can use a USB to AUX converter ( not provided in the kit) and then connect the
3.5mm jack cable attached to the T Harness to this converter.

INSTALLATION
1–Set dip switches according to screen size ( unplug power if changing these)
2-Remove original radio and connect new T wire harness. Make sure you move the fibre optic cable from the original connector to the new one. Connect
the USB and video cables. If adding an aftermarket camera see below.
3-Remove the Grey LVDS connector from the radio and connect it to the new LVDS connector. The other side of the new LVDS is connected to the radio.
4–Attach the wifi antenna. Fit as far away from the black box as possible and not attached to any metal.
The 3.5mm jack cable is not needed unless you are using an AMI converter instead of the cars original AUX
After correct installation you will be able to switch between the original Mercedes screen and Carplay by long pressing the “C” button on the I drive knob
controller ,or on some car models the return button on the left side steering wheel buttons.
5-Go to the SETUP menu and check the systems settings. Language, Display, Audio &Microphone, RHD, Reverse camera

MICROPHONE SETTINGS
The Microphone settings may need to be adjusted to prevent echo . Check the sound of handsfree calling and receiving before handing car to user.
See FAQ section

AFTERMARKET REVERSE CAMERA CONNECTION


For manual transmission cars you will need to connect the Purple wire (Back/ Reverse detect) to a 12v reverse feed or reverse lamp.
In Carplay box Settings—Reverse-Reverse Camera– Aftermarket…. REVERSE LINE DETECT ON
For Automatic transmission cars you do not need to connect this wire as the Reverse will be detected by the CANBus.
In Carplay box Settings—Reverse-Reverse Camera– Aftermarket…. REVERSE LINE DETECT OFF
FRONT CAMERA
The front camera will switch on automatically after R to Drive gear is selected. The view time can be adjusted in settings.
27-876—SMARTPHONE/ CAMERA INTEGRATION FOR MERCEDES WITH NTG 4.5
27-876—SMARTPHONE/ CAMERA INTEGRATION FOR MERCEDES WITH NTG 4.5
27-876—SMARTPHONE/ CAMERA INTEGRATION FOR MERCEDES WITH NTG 4.5
27-876—SMARTPHONE/ CAMERA INTEGRATION FOR MERCEDES WITH NTG 4.5
27-876—SMARTPHONE/ CAMERA INTEGRATION FOR MERCEDES WITH NTG 4.5
27-876—SMARTPHONE/ CAMERA INTEGRATION FOR MERCEDES WITH NTG 4.5
27-876—SMARTPHONE/ CAMERA INTEGRATION FOR MERCEDES WITH NTG 4.5
27-876—SMARTPHONE/ CAMERA INTEGRATION FOR MERCEDES WITH NTG 4.5
27-876— MERCEDES NTG4.5 FAQ
Q: When switching to Carplay or Android the screen displays no signal, a blank screen , abnormal screen or no response ?

A–Check the LVDS wiring is connected as per the wiring diagram.


A-Check that the pins in the LVDS connectors are not bent or not making contact
A-Check that the dip switch setting is correct. Try changing them . Make sure you unplug the box power each time a pin is changed.

Q: I don't have any sound ?

A–make sure the cars original MOST fibre optic cable has been moved to the new connector on the T harness
A-Activate the AUX from the cars engineering menu. Select AUX on cars audio settings.
A-If its not possible to activate the AUX you will need a AMI to AUX converter cable

Q: Unable to connect with wireless Carplay ?

A–make sure Carplay and wifi is turned on on the mobile phone


A-Clear the Bluetooth devices from the cars menu and the phone . Then pair and connect again
A-On the main menu select Wireless Dev , rest the Bluetooth then pair
A-Check and restore Mobile network on phone.
A-Check that the mobile phone Siri permissions are all turned on.
A–Check the wifi antenna is connected and not attached to Metal or the black box itself. (fit away from the black box)

Q: When I call someone , the caller can hear himself in an echo or I am very faint.

A–Adjust the mic volume of the car to normal use


A-in Audio settings menu set the “Mic Echo PreConfig” to C and Loudness off. Switch ign off and on.
A– fine tune Microphone delay and Microphone OP
A-Suggested Audio volume 13, Microphone volume 12, AEC quality 2
A– to increase volume that caller hears increase Microphone PGA and Volume

Q: The steering wheel buttons do not work?

A–In settings turn on “Enable Wheel Key”

You might also like