Scribd
Upload
4 views3 pages

HW 1

The document outlines various dynamics problems related to particle motion, acceleration, and velocity calculations. It includes specific tasks such as determining when acceleration is zero, calculating the position and velocity of moving objects, and analyzing the motion of rockets and blocks under different conditions. Each problem requires the application of kinematic equations and principles of dynamics to find the requested values.

Uploaded by

k2h496
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
4 views3 pages

HW 1

The document outlines various dynamics problems related to particle motion, acceleration, and velocity calculations. It includes specific tasks such as determining when acceleration is zero, calculating the position and velocity of moving objects, and analyzing the motion of rockets and blocks under different conditions. Each problem requires the application of kinematic equations and principles of dynamics to find the requested values.

Uploaded by

k2h496
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

COE204:Dynamics, HW #1 제출기한: 3 월 18 일

11.1 The motion of a particle is defined by the relation x  t 2  t  3 , where x and t are expressed
3

in millimeters and seconds, respectively. Determine (a) when the acceleration is zero, (b) the
position and the velocity of the particle at that time.

11.10 The acceleration of point A is defined by the relation a  5.4 sin kt , where a and t are
expressed in m/s2 and seconds, respectively, and k=3 rad/s. Knowing that x=0 and v=1.8 m/s when
t=0, determine the velocity and position of point A when t=0.5 s.

11.34 The velocity of a particle is v  v0 1  sin t T  . Knowing that the particle starts from the
origin with an initial velocity v0, determine (a) its position and its acceleration at t = 3T, (b) its
average velocity during the interval t=0 to t=T.

11.44 Two rockets are launched at a fireworks performance.


Rocket A is launched with an initial velocity v0 and B is launched
4 s later with the same initial velocity. The two rockets are timed to
explode simultaneously at a height of 73 m, as A is falling and B is
rising. Assuming a constant
acceleration g = 9.81 m/s2, determine
(a) the initial velocity v0, (b) the
73 m velocity of B relative to A at the time
of the explosion.

11.50 Block C starts from rest and moves down with a constant
acceleration. Knowing that after block A has moves 0.5 m its
velocity is 0.2 m/s, determine (a) the accelerations of A and C, (b) the
velocity and the change in position of block B after 2 s.

11.55 At the instant shown,


slider block B is moving to
the right with a constant
acceleration, and its speed is
15.2 cm/s. Knowing that
after slider block A has
moved 25.4 cm to the right
its velocity is 6 cm/s, determine (a) the accelerations of A and B, (b) the acceleration of portion D
of the cable, (c) the velocity and the change in position of slider block B after 4 s.

11.58 Slider block A starts with an initial velocity at


t=0 and a constant acceleration of 270 mm/s2 to the
right. Slider block C starts from rest at t=0 and moves
to the right with constant acceleration. Knowing that at
t=2 s, the velocities of A and B are 420 mm/s to the
right and 30 mm/s to the left, respectively, determine (a)
the accelerations of B and C, (b) the initial velocities of A and B, (c) the initial velocity of portion E
of the cable.

You might also like