Scribd
Upload
45 views17 pages

Export To Studio 5000 Configuration - Lab

The document is a hands-on lab guide for using the Export to Studio 5000 functionality in the Integrated Architecture Builder (IAB). It provides step-by-step instructions on launching IAB, exporting projects, and troubleshooting export issues. The guide emphasizes the importance of using compatible versions and reviewing log files for successful device exports.

Uploaded by

leopatel209
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
45 views17 pages

Export To Studio 5000 Configuration - Lab

The document is a hands-on lab guide for using the Export to Studio 5000 functionality in the Integrated Architecture Builder (IAB). It provides step-by-step instructions on launching IAB, exporting projects, and troubleshooting export issues. The guide emphasizes the importance of using compatible versions and reviewing log files for successful device exports.

Uploaded by

leopatel209
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 17

June 2023

IAB Configuration- Export to Studio 5000


Hands-On Lab

For support or to comment, send e-mail to [email protected]


IAB Configuration– Export to Studio 5000
June 2023

Integrated Architecture Builder:


IAB Configuration-Export to Studio 5000

Contents

Before you begin....................................................................................................................... 4


▪ About this lab .......................................................................................................................... 4

Launch IAB file from Sample Project....................................................................................... 5

Export to Studio 5000 ............................................................................................................... 8


▪ Advanced Communication Details .......................................................................................... 8
▪ How to Export to Studio 5000 with Integrated Motion on EtherNet/IP-ControlLogix 5580
family Sample Project ................................................................................................................. 9
▪ Export to Studio 5000 with PlantPAx System Estimator Sample Project ............................... 14

3 of 17
IAB Configuration-Export to Studio 5000
June 2023

Before you begin

You need a computer with IAB installed with V9.8.3.2 or higher.

About this lab

In this lab, you will learn how to use Export to Studio 5000 functionality in IAB.

Export to Studio 5000 functionality in IAB feature helps the user to save design time
and improves time to market.

4 of 17
IAB Configuration– Export to Studio 5000
June 2023

Launch IAB file from Sample Project

1. Double-click on the Integrated Architecture Builder icon on the computer desktop to


launch IAB:

2. If the Raise dialog box appears, select No.

3. Select File→Start Page→ Sample Project in the Quick Start dialog box.

5 of 17
IAB Configuration-Export to Studio 5000
June 2023

4. Select ControlLogix and Integrated Motion on EtherNet/IP-ControlLogix 5580


family.

5. If you notice the warning message below, Save the project in your desired location.

Note: Once you save the file in your desired location, double click and open the project
from that location to proceed further

6. Click Hardware View and notice the devices connected in this project.

6 of 17
IAB Configuration– Export to Studio 5000
June 2023

7 of 17
IAB Configuration-Export to Studio 5000
June 2023

Export to Studio 5000

Advanced Communication Details Interface

1. Navigate to Advanced Communication Details Interface and notice the I/O devices-
1756 I/O modules, 5069 Compact/IO, ArmorBlock I/O modules, Kinetix 5700 ,1734-
AENTR are assigned to ControlLogix 5580 Controller (highlighted in yellow)

Note: Only, the devices with Add-On Profile (AOP) and assigned to controller in
Advanced Communication Details Interface will be successfully exported to
Studio 5000.

2. PanelView Plus 7 will not be exported in Studio 5000 as HMI devices with only Class 3
Connections are not part of the Export to Studio 5000.

8 of 17
IAB Configuration– Export to Studio 5000
June 2023

How to Export to Studio 5000 with Integrated Motion on EtherNet/IP-


ControlLogix 5580 family Sample Project

1. Click File→Export to Studio 5000 as shown below.

2. There are several informational dialogs or logs that are displayed/created to help you
identify Devices that have experienced problems. It is recommended to visit the
Advanced Communication Details Interface and assign the devices to the ControlLogix
5580 Controller if it was missed earlier.

9 of 17
IAB Configuration-Export to Studio 5000
June 2023

3. Select the controller that you wish to export to Studio 5000. This project has one
ControlLogix 5580 Controller as listed below. If your project has multiple controllers, then
each controller will be having individual L5x files

Note: During the import process, if you specify lower than Version 35 of Studio 5000
Logix Designer, it may result in some modules not being exported.

4. Click Help button which opens Studio 5000 Export Help file. Refer the Export
Assumptions section for details.

10 of 17
IAB Configuration– Export to Studio 5000
June 2023

5. The Export to Studio 5000 is complete and the export and log files are stored in location
highlighted below.

6. Click View Files to view the IAB, export and log files.

11 of 17
IAB Configuration-Export to Studio 5000
June 2023

7. It is important to review the Controller log files to understand the reason why a Device
may not have been exported.

Note: In the event some devices were not exported, it is important to review the Controller log
files to understand the reason why a Device may not have been exported.

8. Right-click on .L5X file and Select Open with Logix Designer

12 of 17
IAB Configuration– Export to Studio 5000
June 2023

9. Save the project imported in your desired location. The export is based upon testing
from Studio 5000 Version 35 (latest version). Click Import…

10. All the devices from IAB are now exported in Studio 5000

13 of 17
IAB Configuration-Export to Studio 5000
June 2023

Export to Studio 5000 with PlantPAx System Estimator Sample Project

1. Select PlantPAx System Estimator in Sample Project and select PlantPAx Small
System project.

14 of 17
IAB Configuration– Export to Studio 5000
June 2023

2. Double-click on PPSmall project and check “Generate Bill-of-Material upon Finish”


and Click Finish. Old files of PlantPAx should be regenerated in latest version of IAB
to get the Export to Studio 5000 functionality.
3. Save the project to your desired location. If you notice any error, refer step 5 in Page
7.
4. Select all controllers that you wish to Export to Studio 5000. This project has four
5580 Process Controllers as listed below. Click Accept.

5. The Export to Studio 5000 is complete. Open the Log file to understand about the
devices which will be successfully exported.

15 of 17
IAB Configuration-Export to Studio 5000
June 2023

6. Open the .L5X file.

Note: There are multiple .L5X files created as this sample project includes four 5580
Process Controllers

7. All the devices from IAB are now exported in Studio 5000.

16 of 17
IAB Configuration– Export to Studio 5000
June 2023

This concludes the lab on how to use Export to Studio 5000 functionality in IAB.

17 of 17

You might also like