1

COC 1 Install and configure computer systems (2 hrs)

✓ Assembly and disassembly of computer system

o Identification of parts
o Troubleshooting, oral questioning
o Parts and functions

✓ Create Bootable USB – Windows 7 – Power ISO

✓ Install OS – 2 OS
o Server – Server 2008 R2 (bootable USB provided by assessment center)
o Desktop client – Windows 7
✓ Installation – 2 partitions
o C: 40%
o D: 60% - will be used for full server backup
o Activate
✓ Install drivers – LAN driver – Driver Pack Solutions
o Printer driver
▪ Share printer
▪ Turnoff firewall
▪ Configure Remote Desktop setting
Standard – working computer – disassemble , assemble, iinstallan ng OS

Server – CTRL + ALT + DEL

-Administrator – password
- Strong Password - should contain 4 of these (Alphanumeric, Numbers,
Special Characters, Not less than 7 chars, Use Capital letter)
- Server Manager
Role – 0 of 17 – Full standard
Standards (Full, Core)
COC 2 Set-up Computer Networks (2 hrs)
✓ Prepare network cables – straight-through – WG G WO Bl WBl O WBr Br
o Patch panel
▪ Back – modular jack (2 cables)
▪ Front – switch (2 cables)
o Switch to router (1 cable)
o 2 Desktop to Modular jack (2 cables)
Kung tatanggalin patch panel to router (2 cables)
Kung may switch (3 cables)
✓ Reset Router - 15 to 20 seconds
✓ Network connection – Automatic / Dynamic – IP Address
- Run, cmd – ipconfig
▪ Default Gateway – 192.168.1.0
- Explorer - 192.168.1.0
• Admin
• Wireless – SSID – “ABC” – Save
▪ Security – WPA-PSK
• Password – 123456789a
• Network – LAN – IP Address – 192.168._.254
- Ipconfig
 2
✓ Folder for sharing
o 2 folders – 1 for COC 3 – redirection and mapping

✓ Peer-to-peer networking – Laptop to wireless router

o Static IP Address
▪ 1 – Server (e.g. 192.165.__.1)
▪ 2 – Desktop Client (e.g. 192.165.__.2)
▪ 3 – Laptop (e.g. 192.165.__.3)
o Ping test
o Folder should be visible and accessible to all computers

COC 3 Set-up Computer Servers (1.5 hours)

✓ Disable client network device

✓ Set Server’s IP address to Static (192.168._.1)
✓ Disable DHCP ng Router

Server Manager
1. Add Roles
o Active Directory Domain Services (ADDS)
▪ Next, Install

2. Run, cmd, dcpromo – domain controller promoter(DNS)

o Next, next, Create Domain in New Forest
o _____.____ - Next
o 2003 Functional level
▪ Next – 5 to 10 minutes
▪ Reboot on completion
Wait magpopup ang Server Manager

3. Add DHCP sa Server

o Add Roles – Dynamic Host Configuration Protocol (DHCP) Server

o Next, Next, IP Address, OK
▪ Change preferred DNS Server IPv4 Address
• IP Address ng Server – Validate
o 192.168.__.1
• Next, Next, Add
o Scope Name - Any name, wag lang name ng Domain
o Scope Address – start with 2 ends with 10
• Starting IP – 192.168.__.2
• End IP – 192.168.__.10
8 day duration – mawawala sa list for dynamic IP address
✓ Next, Next, Validate, Next, Install

3 Roles (ADDS, DNS, DHCP Server)

✓ Enable ang network ng clients…

✓ ipconfig… check kung .2 sya…
✓ Ping Test
 3
✓ Create New Folders
o RED
o MAP

✓ MAP – Share, Everyone, Read/Write – Share done

o Advanced Sharing – Share this folder
▪ Permission, Full - Add, AU (Authenticated Users)
Copy Network Path – Paste sa Notepad

Nadagdag yung File Services sa Roles dahil nag share

Folder redirection
✓ Group Policy Management – maximize, expand
o Domains – right-click – Domain
▪ Create
• R – right-click, Edit
o User Configuration
▪ Folder redirection

Deploy Printer
Add Roles - GPO – deployment ng printer
✓ Next - Print and Document Services
o Next, Next, Install
o Printer Management – Printers
o Right-click – Deploy with Group Policy
Create User
✓ Active Directory Users and Computers
o Click Domain
▪ New User
- User logon name, Next
- User cannot change password
- Password never expires
2 user accounts

Mapping
Profile – Path:
▪ Connect z:/ to: ______________________\GLENDA - apply

Map – another drive

✓ Connect client PCs sa network

---Client PCs
✓ Replace PC Properties – Change to Domain
o Domain name – nasa dcpromo
✓ Kailangan mag “Welcome, to ___________ domain” restart PC
✓ Login gamit ginawang account
✓ Redirection, Mapping, Printer Sharing
 4
✓ Remote desktop direction
o Connect Client to Server (IP address – 192.168.__.1)
▪ Create documentation sa Laptop (Notepad)
• Name ng Assessor, etc
▪ Print via Virtual Printer (Spool)

o Connect Printer to Server – dapat makapag print in 5 minutes

▪ Right click – Properties – Port - change printer port – Virtual USB -
Apply - OK

COC 4 Maintain and Repair Computer Systems and Networks (1 hour)

✓ Storage
o Add Features
▪ Windows Server Backup, Next, Install
o Refresh

✓ Storage – Windows Server Backup

o Actions – Backup Once
▪ Different Options, Next
• Full Server (Recommended), Next
o Local Drives, Next
▪ Backup Destination
• ……Backup (10 minutes)
✓ Troubleshoot
✓ Full server backup – for 30 minutes
✓ Will delete system files
✓ Restore deleted system file using restoration procedure
o Dapat walang maduduplicate

Removal of Roles

Client – Remove from Domain

Server – Ctrl + Alt + Delete – Login

Remove Roles

1. File Services – share and storage management

- Ctrl + A – Ctrl Click – (IPC$ - default) – iwan
• Stop Sharing, Yes, Yes
- Refresh – nawala na File Services

2. Dcpromo – delete the Domain, Next

- Next – delete All applications
- Reboot on completion
-
3. Pwedeng I remove nang sabay-sabay ang roles
o Remove – uncheck all – next
o Delete printers – remove
 5
Summary

I. Router Configuration
1. Reset the router (press the reset button of the router for about 15 sec.)
2. Dynamic IP address (all PCs)
3. Disable network connection of client computers
4. “ipconfig” - Get the Default gateway IP address
5. Web browser, type default gateway, add, add, Login
6. Advanced Settings
a. Wireless, SSID
b. Security, disable the WPS disable, set password
c. Network, LAN – replace IP address 192.168._.254
7. Reload the Log in page on the browser, new router IP address
8. DHCP – address pool – start 192.168._.1 end - 192.168._.3
9. Ipconfig – IP address should be 192.168._.1 server
10. Client – enable network – should get the 192.168._.2(desktop) and 192.168._.3(laptop)
respectively
11. Perform ping tests

II. AD DS (Active Directory Domain Services)

1. Server – static IP address 192.168._.1
2. Return to Web browser and log in to the router setup; go to DHCP settings and disable the
DCHP by Clicking the check box (uncheck the box)
3. Server Manager, Add Roles, next, Active Directory Domain Services, next, next, install
✓ Add Required Features to install .NET Framework 3.5.1 feature
4. Active Directory Domain Services Installation Wizard (dcpromo.exe).
✓ Dcpromo, Use advanced mode installation, Next
✓ Operating System Compatibility page - next,
✓ On the Choose a Deployment Configuration page, click Create a new domain in a
new forest, and then click Next.
✓ On the Name the Forest Root Domain page, type the full Domain Name System (DNS)
name for the forest root domain (Ex. Glen.c, and then click Next.
✓ Set Forest Functional Level, Windows Server2003, Next
✓ Additional Domain Controller Options, Next
✓ Location for Database, Log Files, and SYSVOL, Next
✓ Directory Services Restore Mode Administrator Password, Type password, Next, Reboot
on completion

III. DHCP - (Dynamic Host Configuration Protocol)

1. Server Manager, right click on Roles, Add roles, Next, DHCP Server, Next, Next.
2. Select Network Connection Bindings, Next
3. Specify IPv4 DNS Server Settings
a. Parent domain
b. Preferred DNS Server IPv4 address (IP address ng server), Validate, Next
4. WINS is not required… Next
5. Add or Edit DHCP Scopes, Add
6. Now you need to:
a. Give your scope a name – “LAN_DHCP1”
b. Enter the first address that you want available to clients to use (do not use the server
IP address) – 192.168._.2
c. Enter the last address that you want available to clients to use – 192.168._.3
d. Enter the subnet mask (usually 255.255.255.0)
e. Enter the IP address of your default gateway (your router IP address .254)
7. Subnet , Activate this scope
8. Once you have clicked on OK, you can click next 4 times to get to the confirmation screen
where you can finally click install.
9. Once the installation is complete your DHCP will be functioning, and you can start
managing your DHCP server right away.

File Services
1. Create and Share 2 folders
a. RED
b. MAP
😉 Copy Sa notepad yung Paths

IV. CREATE USER

1. Active Directory Users and Computers \ Domain Node \ Folder\ New \ User
 6
2. First Name, Initial, Last Name (Modify Full name), Logon name, UPN, Next
3. Password and Confirm Password (uncheck “user must change password”, check “user
cannot change and password never expires”

VI. Mapping 😉
– Right Click on the User and click properties
Profile
✓ Profile path - path
✓ Connect to – path\USERNAME

V. Redirection
1. Administrator tools, Group Policy Management
2. Forest, Domain, Create GPO (ex. My GPO)
3. Expand the domain name to see your GPO, right click, edit GPO
4. Expand Policies under User Configuration, Windows Settings, Folder Redirection
5. Right click on the Folder of your choice (ex. Desktop), Properties, “Basic Redirect
everyone’s folder to the same location”
6. Create a folder for each….
7. Redirection Path

Gpupdate /force

VIII. Connect your clients to domain

Clients – Desktop and Laptop – enable network, ctrl Pause + Break (Computer
Properties), Change, Domain, type Domain Name (Ex. Glen.c)
- Ctrl Alt Del, switch User, other User, username send password
- Open the computer and check your mapped folder if it appears as
another drive

IX. Remote Desktop Connection

Computer Properties, Remote Settings, Allow remote connection to this computer

1. Search “Remote desktop”, Remote Desktop connection, type “IP Address” of the
computer you want to connect to, Yes, OK

X. Printing

1. Install Printer in your Server PC

- if there is no physical printer present, just use com1 as printer port
NOTE: If there is a physics printer, attach the printer to the USB port of your computer,
change the printer port to “USB Virtual Printer port for ….“

2. Share Printer
3. Deploy Printer
4. Client – type the following info in Notepad or MS Word, print and submit
• Your full name
• Name of training institution
• Date of assessment
• Place of assessment
• Server IP Address (192.168._.1)
• Desktop IP Address (192.168._.2)
• Laptop IP Address (192.168._.3)
• Wi-Fi SSID and Password