User Guide for OBDCheck BLE+ (App selection and connection)

Recommended Apps for Standard OBD II Diagnostic Features

(App Not Included; requires separate download or purchase)
Compatible Price (may vary depending on
App Name Developer Notes:
Platform the developer)
Compatible with a lots of
hybrids & EVs and comes
Car Scanner with a few extended PIDs
0vZ iOS & Android Mostly Free
ELM OBDII for some vehicles. Please
check in the App by
selecting the car brand.
Comes with enhanced
diagnostics for Ford, Paid; enhanced
Lincoln, Mazda, Toyota, diagnostics
OCTech,
OBD Fusion iOS & Android Lexus, Nissan, Infiniti, require
LLC
Dodge, RAM, Chrysler, separate in-
Jeep, and some FIAT and app purchase
Alfa Romeo vehicles.

A smart vehicle Mostly Free

management app that with in-app
Infocar - OBD Infocar Co.,
iOS & Android provides vehicle diagnosis purchase for
ELM Diagnostic Ltd.
and information on some premium
driving style. features

Do NOT mix it with those

Torque Lite/Pro apps with similar names Pro version is
Ian Hawkins Android only
(OBD II & Car) which may not be paid
supported.

Torque Car Pro - OBD2 Scanner,

These Apps are usually poor
Torque Pro: OBD2 Car Scanner,
Unsupported & Not imitations, have very limited
Torque App: Car Check, Tracker,
recommended iOS Apps features, and may ask you to
Torque OBD2,
pay or subscribe.
OBD2 Car Scanner - Torque FixD
FYI, vehicles since the following model year are OBD II compliant and compatible (excluding hybrid
plug-in and electric vehicles):
United States 1996
Canada 1998
European Union 2001 (gas), 2004 (diesel)
Australia 2006 (gas), 2007 (diesel)
Mexico 2006
Japan 2002
Brazil 2007 (gas), 2015 (diesel)
New Zealand 2006
Note: If your vehicle does not fall into any of the above categories, look under the hood and try to locate
a label that explicitly states that the vehicle was designed to comply with OBD-II legislation.
 Advanced Diagnostic Availability
(ABS, airbag, etc. App Not Included with the device)
Required
Car brand Supported model year Special Notes
App
Requires in-app purchase of
OBD Fusion 1996 - 2022
Ford, Lincoln & advanced diagnostics add-on
Mercury Paid; Some models from 2023 are
FORScan Lite 1996 - 2023
not yet supported
FORScan Lite 1996 - 2022 7G models may not be supported
Mazda
Requires in-app purchase of
OBD Fusion 1996 - 2023
advanced diagnostics add-on
Requires in-app purchase of
OBD Fusion 1996 - 2021
Toyota, Lexus & advanced diagnostics add-on
Scion Check vehicle compatibility on
Carista Requires an app subscription
the app website.
Requires in-app purchase of
OBD Fusion 2006 - 2021
advanced diagnostics add-on
Nissan & Infiniti
Check vehicle compatibility on
Carista Requires an app subscription
the app website.
Requires in-app purchase of
Mitsubishi OBD Fusion 2009 - 2022
advanced diagnostics add-on
Suzuki SZViewer 2000+ K-Line and CAN bus based
Premium features require an in-
Subaru ActiveOBD 2012+
app purchase
BimmerLink 2008+ Paid app

BMW & Mini Carista 2008+ Requires an app subscription

bimmer-tool 2008+ Paid app for Android only

Check vehicle compatibility in the

OBD JScan In-app purchase required
FCA (Jeep, Chrysler, app
DODGE, RAM) Requires in-app purchase of
OBD Fusion 2006 - 2023
advanced diagnostics add-on
Volkswagen/Audi/Se Check vehicle compatibility on
Carista Requires an app subscription
at/Skoda the app website.

Check vehicle compatibility on

Others OBDocker Requires an app subscription
the app website.
Important Info: most generic OBD2 apps do not support advanced diagnostics, for example Torque
Lite/ Pro (OBD2 & Car), Car Scanner ELM OBD2, OBD Auto Doctor, which means they cannot check
ABS, airbag (SRS), TPMS, etc. Also, some car brands are not supported for advanced diagnostics as
there is no proper App for the moment.
What’s the difference between OBD-II standard and advanced diagnostics?
The On-Board Diagnostics II (OBD-II) standard and advanced diagnostics refer to different levels of
diagnostic information and capabilities in vehicles.
OBD-II Standard diagnostics: Mandated by regulatory bodies (e.g., EPA in the United States) for all cars
and light trucks sold in certain regions and focuses on emissions-related data to ensure vehicles comply
with environmental standards. It provides access to a set of standardized diagnostic trouble codes (DTCs),
and live data parameters (standard PIDs) such as engine RPM, vehicle speed, fuel system status, and
oxygen sensor readings. These data and codes are standardized across different makes and models,
ensuring that a generic OBD-II scanner can read the basic diagnostic information from any compliant
vehicle.
Advanced Diagnostics: provides additional level of diagnostic data beyond what is required by the
OBD-II standard, including proprietary diagnostic trouble codes, and extended parameter identifications
(PIDs). These data are often specific to the vehicle manufacturer and model. Advanced Diagnostics
usually refers to vehicle systems such as transmission, ABS, airbags, body control modules, and more,
which requires more capable diagnostic tools or software that can interpret manufacturer-specific codes
and data.

Additional notes:
1. Modules in MS-CAN are not supported (For Ford/Mazda vehicles);
2. BMW and Mini model year before 2008 are not supported for advanced diagnostics;
3. For FCA vehicles equipped with secure gateway (around 2017 or 2018+), an additional adapter is
required to clear advanced codes. Please refer to the app page for more information.
4. Vehicles from recent years may not have been supported for advanced diagnostics. Please go to
the app website to check.
5. Cost of Apps Not Included; pricing information may change depending on the developer.
6. The list will be updated from time to time when new brands or models are supported. You can
contact Veepeak customer service to check if your vehicle is not listed.
 Common Advanced Third-Party Apps
(for some advanced features on selected vehicles; App price NOT
included)
Compatibl
Compatible
App Name e Special Notes Main Features Price
Vehicles
Platforms
Not compatible with
2008+ E Series, BMW/Mini Models before
iOS & F Series, 2008; G series not fully For BMW & Mini
BimmerCode Paid
Android I Series, supported (e.g. 2018+ 3 Coding
2008+ R Series Series, 2017+ X3, 2017+ 5
series, 2019+ X5, etc.)
Read trouble codes,
display real-time
Not compatible with
iOS & sensor values,
BimmerLink MY2008+ BMW/Mini Model Year before Paid
Android register a new
2008
battery, service
reset, etc.
iOS: select “Auto connect to
Selected Jeep, Advanced
Bluetooth 4.0 Low Energy” as
Chrysler, diagnostics, sensor
the OBD adapter. In-app
iOS & Dodge, RAM. data in all modules,
OBD JScan Android: select VEEPEAK purchas
Android Check on the customization, tire
under e
App for size change, ETC
Bluetooth OBD (2.0, 3.0)
details. Relearn, etc.
adapters as the OBD adapter
iOS: tap to select VEEPEAK
under Bluetooth Low Energy Free
Examine/monitor
2003+ Prius & and click “Connect OBD”. with in-
iOS & the health of the
Dr. Prius Toyota/Lexus Android: tap to select app
Android vehicle High Voltage
hybrid models VEEPEAK under Bluetooth purchas
battery
OBD to connect. e

Select ELM32 Bluetooth Diagnose,

Selected
(Android), or ELM32 Bluetooth customize, service
Toyota, Basic
LE (iOS) as the Adapter; and live data.
iOS & Nissan, Lexus, OBD
Carista Extra feature availability Requires
Android Infiniti, VW, features
depends on the specific subscription
Audi, BMW, are free
vehicle. Check App website for for advanced
Mini models
feature details. features.
Note:
1. Please check on the App page for the latest vehicle compatibility information.
2. Also compatible with bimmer-tool (only for MY2008+), ABRP (iOS version only), Leaf Spy Pro,
CVTz50, GaragePro, OBDocker, FORScan Lite (no MS-CAN support), AlfaOBD, etc.
3. Apps require separate download or purchase from Play Store or App Store. For detailed App
features, please go to App website to check.
4. NOT compatible with Bluedriver, FIXD, Carly, MHD, xHP, ProTool Apps.
 EV Compatibility Guide
Car Make Supported Model Year Required App Note

For Most EVs & PHEVs, please first check Car Scanner ELM OBD2 App (free) and see if there is
a suitable connection profile. More Apps can be found below.
Requires extra adapters; speed
Tesla Model S, 3, X & Y scan my tesla
may not be very fast.
e-tron, Q4 E-tron, Q5 E- May not work with Android
Audi ABRP, Carista, eFlow
tron version of ABRP

2013+ i3, i8 BimmerLink Paid

BMW
i, iX, PHEV, Mini Cooper eFlow (Formerly
In App purchase
SE 2019+ BimmerFlow)
ABRP, Torque Pro
Chevrolet Bolt, Spark, Volt Torque Pro requires custom PIDs
Android
Check on https://priusapp.com/
Prius Dr Prius for more supported Toyota hybrid
Toyota vehicles
May not work with Android
bZ4X ABRP
version of ABRP
Nissan Leaf Leaf Spy Pro Paid App

May not work with Android

IONIQ, Kona, Soul, Niro ABRP
Hyundai/Ki version of ABRP
a
IONIQ, Kona, Soul, Niro EVNotify

e-Golf, e-Up!, ID.3, ID.4, May not work with Android

Volkswagen ABRP, Carista
ID.5, ID.6, ID.7 version of ABRP
May not work with Android
Ford Mustang Mach-E ABRP
version of ABRP

Porsche Taycan 2019-2023 eFlow In App purchase

Extra Notes:
1. Due to the fast-growing EV markets, this list may not cover all the EVs and some EVs may not be
supported yet. We will update it regularly. Please check the latest information from above Apps.
2. Generic OBD apps will not work with plug-in hybrids or EVs, except for Car Scanner ELM
OBDII, which has connection profiles for many EVs.
3. The OBDCheck BLE may not work with the Android version of ABRP because it works under
Classic Bluetooth mode for Android.
4. Some apps require subscription such as Carista.
Car Scanner App Connection Guide (iOS version)

1. Install the App from App Store.

2. Plug in the device, and make sure it fit snugly. Then turn on car ignition. Go to the Bluetooth
Settings of the iOS device to check if VEEPEAK shows up under Other devices (read note on the next
page).
Important Note: this device uses Bluetooth LE for iOS devices. Please do not connect with VEEPEAK
here. Please start the app, and directly connect in the App. The App will make the Bluetooth LE
connection to the device.

Tip: if you accidently tap on VEEPEAK, it will lead to an unsupported device error, and VEEPEAK will
disappear here. You can restart your iOS device and it will show up again. Then go to the next step.

3. Start the app, make the following settings and directly connect in the app.

Setting > Adapter OBDII ELM327 > Connection type: select Bluetooth LE (4.0+); under device name:
select VEEPEAK on the device list.

4. For connection profile, select your car brand and then the applicable profile. If no other suitable
profile is available, select OBD II / EOBD.
5. After the above two marked settings are made, go back to the main page and click Connect button.
When the connection to both ELM & ECU are made, you can start to use.

Friendly reminder: If you experience any difficulty or issues during use, please read the instructions
for use or troubleshooting guide on the product detail page “Product guides & documents”. You can
also reach out to Veepeak customer support at [email protected] to get help.

The guide for Android version and other common Apps can be found on the
subsequent pages.
Car Scanner App Connection Guide (Android version)
1. Install the App from Google Play Store (Car Scanner ELM OBD2 by OvZ).

2. Plug in the device, and make sure it fit snugly. Then turn on car ignition. Go to phone’s Bluetooth
Settings, and pair new device. Wait for VEEPEAK to show up.

3. When “VEEPEAK” shows up, tap on it. Use pin 1234 to pair with it. (If it does not pair, follow the
troubleshooting steps in the user instructions or troubleshooting guide)
4. After pairing, it may not show as connected. On a Pixel 4a, it shows as Saved. You do not need to
connect again. You can ignore the status and proceed to the next step.
5. Start the App, grant the App permissions (Bluetooth or Nearby devices), make the initial settings
according to your preferences.

6. In Settings - Adapter OBDII ELM327, please select Bluetooth as connection type, then under “select
device”, select VEEPEAK on the list.
7. For connection profile, select your car brand and then the applicable profile. If no other suitable
profile is available, select OBD II / EOBD.

8. After the above two marked settings are made, go back to the main page and click Connect button.
When the connection to both ELM & ECU are made, you can start to use.
Below are the connection settings for other common Apps:

Torque Lite/Pro (for Android only, no iOS version)

Go to Settings – OBD2 Adapter Settings, select “Bluetooth” as Connection type, and “VEEPEAK” as the
Bluetooth device. Close the App, and restart it.

You can check the connection status from main page – Adapter Status.
 OBD Fusion (iOS & Android, paid)

iOS: Settings – Preferences - Communications, select Bluetooth LE as the communication type.

Android: Settings – Preferences - Communications, select Bluetooth as the communication type, and
select VEEPEAK as the Bluetooth device.

How to get enhanced diagnostics in OBD Fusion:

1. Connect to your vehicle by following the instructions on the Settings > Help > Connection page.

2. Open the vehicle editor on the Settings > Vehicle Editor page.

3. Use the Select buttons to enter the full year, make, model, and option for your vehicle. You must use
the Select buttons to enter this information. If your year, make, model, or option is not listed, you can
manually enter it, but enhanced diagnostics will not be available for your vehicle.

4. Open the Settings > Purchase Extras page and wait for the app to load the list of extra items.

5. Select the category corresponding to the make of your vehicle.

6. Find and select the package corresponding to your vehicle year, such as Ford 2003 Enhanced
Diagnostics. If you have vehicle(s) supported by this add-on, you will see a list of the vehicles at the
bottom of the page. If you do not have any vehicles supported by this add-on, you will see a message
indicating that you do not have any vehicles supported by this add-on.
 OBD JScan (iOS & Android)
iOS: select “Auto connect to Bluetooth 4.0 Low Energy” as the OBD adapter.

Android: select VEEPEAK under Bluetooth OBD (2.0, 3.0) adapters as the OBD adapter.
 BimmerCode (iOS & Android, paid)

Note: G series & pre-2008 models are not supported). Go to https://bimmercode.app/cars to check
adapter and vehicle compatibility. Please refer to the following steps to connect:
Android:
1. Plug in the device into the OBD port in the footwell on the driver side. Turn on ignition.
2. Disconnect the Bluetooth connection to the iDrive system and any additional Bluetooth connections.
3. Enable the Airplane mode on the Android phone.
4. Turn on Bluetooth on the Android phone.
5. Open the Android Bluetooth settings on the Android phone and pair with “VEEPEAK”. No need to tap on
it to connect again even though it does not show as connected after pairing.
6. Open the BimmerCode app Settings and select “Veepeak OBDCheck BLE/BLE+” as the adapter type.
7. Tap “Connect” on the start screen in the BimmerCode app.

iOS:
1. Plug in the device into the OBD port in the footwell on the driver side in the car. Turn on ignition.
2. Enable the Airplane mode on the iOS device.
3. Turn on Bluetooth on the iOS device.
4. Turn off Wi-Fi on the iOS device.
5. Disable CarPlay in the iOS settings (“Settings” > “General” > “CarPlay” > Select car > Disable “CarPlay”).
6. Disconnect the iOS device in the iDrive settings in the car (“COM” > “Mobile devices” > Select the device >
“Disconnect device”).
7. Disconnect any additional Bluetooth connections to other devices.
8. Keep the distance between the iOS device and the adapter as short as possible.
9. Open the settings in the BimmerCode app and select OBDCHECK BLE or BLE+ as the adapter type.
10. Tap “Connect” on the start screen in the BimmerCode app.

Tip: Please enable airplane mode. If you have some kind of third party CarPlay unit connected to the
iDrive system in your car, please enable “Ignore headunit” in the settings in the app. If you want to
access the headunit with BimmerCode you have to disconnect the CarPlay unit from the iDrive system
temporarily.

BimmerLink (iOS & Android, paid)

Note: pre-2008 models are not supported. Please select “Veepeak OBDCheck BLE/BLE+” as the adapter.
 Infocar (iOS & Android)

For iOS: Tap on “Connection” or go to Settings, select Bluetooth LE 4.0 as Connection type, and tap on
VEEPAK on the Bluetooth list.

For Android: Tap on “Connection” or go to Settings, select Bluetooth as Connection type, and tap on
VEEPAK on the Bluetooth list.
 Dr. Prius (iOS & Android)

iOS: tap to select VEEPEAK under Bluetooth Low Energy and click “Connect OBD”.

Android: please tap to select VEEPEAK under Bluetooth OBD2 to connect.

 Carista OBD (iOS & Android, advanced features require subscription)

Go to https://carista.com/en/supported-cars to check vehicle compatibility).

iOS: select ELM327 Bluetooth LE as the adapter.

Android: select ELM327 Bluetooth as the adapter.

Note:
*These Apps can be downloaded from Google Play Store, or Apple App Store.
App price is decided by the developer and not included with the device.
*For iPhone or iPad, no Bluetooth pairing is needed. You should directly connect
in the App.
*For some Android devices, VEEPEAK may not show as connected after pairing,
but you can just start the App to connect.