Scribd
Upload
2 views14 pages

5 - Installation-Guide

This document provides a step-by-step guide for installing Visual Studio Code and the PlatformIO IDE for building embedded systems with Simulink. It also includes detailed instructions for installing the Simulink Support Package for Arduino, covering hardware support package selection, installation of tools and libraries, and board configuration. The guide concludes with verification of the setup and completion of the installation process.

Uploaded by

mbisvakudakwashe
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2 views14 pages

5 - Installation-Guide

This document provides a step-by-step guide for installing Visual Studio Code and the PlatformIO IDE for building embedded systems with Simulink. It also includes detailed instructions for installing the Simulink Support Package for Arduino, covering hardware support package selection, installation of tools and libraries, and board configuration. The guide concludes with verification of the setup and completion of the installation process.

Uploaded by

mbisvakudakwashe
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 14

Model Based Desing:

Build Embedded
Systems with Simulink
Visual Studio Code Installation
& PlatformIO

+
Visual Studio Code Installation
1- Go to https://code.visualstudio.com/download

2- Download for you operating , I am


using windows

3- Complete the installation process


1- Click Extensions Marketplace icon
2- Search for platform IO IDE
3- Click “install”
4- After installation you will find a new
Icon appears in the list
1- Click the new PlatformIO icon

2- You will see a similar screen with


the list to the left
Simulink Support Package for Arduino
Installation Guide
Step 1
1- Press on Add-Ons

2- Get Hardware support Package,


A new window will open with all
available hardware support
packages

3- Select Simulink support package


for Arduino Hardware
Step 2

Press install button and accept the


license agreement
Step 3

- This step for installing required


tools and libraries to make run
generated code on Arduino

- Wait for installation to complete


Step 4
- Tools and libraries are installed
then it is time for board
configuration, simple !!

- Select Automatically download


and install
- Press install button
- After successfully installed “next”
button will be active, press it for
next step
Step 5
- At this stage your Arduino board
must be connect through USB
- Select the COM port that your
board is connected to, it should
appear in the list
- If your board does not show up,
check your connection
- Press “next”
Step 6

- To make sure that everything is done


correctly, let’s verify the setup
- Select “Yes”
- Press “next”
- Press “Test connection”
- After connection is being tested
successfully, next button will be active
Step 7
- This what you will see after
connection test is completed
successfully
- If you want to go through some model
examples mark the checkbox
- Press “finish” to complete the process
DONE !!!

You might also like