Module 3: Protocols and

Models

Introduction to Networks 7.0 (ITN)

 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
Module Objectives
Module Title: Protocols and Models
Module Objective: Explain how network protocols enable devices to access local and remote network resources.
Topic Title Topic Objective
The Rules Describe the types of rules that are necessary to successfully communicate.

Protocols Explain why protocols are necessary in network communication.

Protocol Suites Explain the purpose of adhering to a protocol suite.

Standards Organizations Explain the role of standards organizations in establishing protocols for network
interoperability.

Reference Models Explain how the TCP/IP model and the OSI model are used to facilitate
standardization in the communication process.

Data Encapsulation Explain how data encapsulation allows data to be transported across the
network.
Data Access Explain how local hosts access local resources on a network.
3.1 The Rules

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 3
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES

The Rules
Communications Fundamentals

Networks can vary in size and complexity. It is not enough to have a connection,
devices must agree on “how” to communicate.
There are three elements to any communication:
• There will be a source (sender).
• There will be a destination (receiver).
• There will be a channel (media) that provides for the path of communications
to occur.
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
The Rules
Communications Protocols

• All communications are governed by protocols.

• Protocols are the rules that communications will follow.
• These rules will vary depending on the protocol.
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
The Rules
Rule Establishment
• Individuals must use established rules or agreements to govern the conversation.
• The first message is difficult to read because it is not formatted properly. The second shows
the message properly formatted
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES

The Rules
Rule Establishment (Cont.)

Protocols must account for the following requirements:

• An identified sender and receiver
• Common language and grammar
• Speed and timing of delivery
• Confirmation or acknowledgment requirements
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
The Rules
Network Protocol Requirements

Common computer protocols must be in agreement and include the following

requirements:
• Message encoding
• Message formatting and encapsulation
• Message size
• Message timing
• Message delivery options
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
The Rules
Message Encoding
• Encoding is the process of converting information into another acceptable form for
transmission.
• Decoding reverses this process to interpret the information.
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
The Rules
Message Formatting and Encapsulation
• When a message is sent, it must use a specific format or structure.
• Message formats depend on the type of message and the channel that is used to
deliver the message.
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES

The Rules
Message Size
Encoding between hosts must be in an appropriate format for the medium.
• Messages sent across the network are converted to bits

• The bits are encoded into a pattern of light, sound, or electrical impulses.

• The destination host must decode the signals to interpret the message.
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
The Rules
Message Timing

Message timing includes the following:

Flow Control – Manages the rate of data transmission and defines how much information can
be sent and the speed at which it can be delivered.
Response Timeout – Manages how long a device waits when it does not hear a reply from
the destination.
Access method - Determines when someone can send a message.
• There may be various rules governing issues like “collisions”. This is when more
than one device sends traffic at the same time and the messages become corrupt.
• Some protocols are proactive and attempt to prevent collisions; other protocols are
reactive and establish a recovery method after the collision occurs.
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
The Rules
Message Delivery Options
Message delivery may one of the following methods:
• Unicast – one to one communication
• Multicast – one to many, typically not all
• Broadcast – one to all

Note: Broadcasts are used in IPv4 networks, but are not an option for IPv6. Later we will also
see “Anycast” as an additional delivery option for IPv6.
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
The Rules
A Note About the Node Icon

• Documents may use the node icon , typically a circle, to represent all devices.
• The figure illustrates the use of the node icon for delivery options.
3.2 Protocols

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 15
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
Protocols
Network Protocol Overview

Network protocols define a Protocol Type Description

common set of rules.
• Can be implemented on Network enable two or more devices to communicate over
devices in: Communications one or more networks
• Software
• Hardware Network secure data to provide authentication, data
Security integrity, and data encryption
• Both
• Protocols have their own:
Routing enable routers to exchange route information,
• Function compare path information, and select best path
• Format
• Rules Service used for the automatic detection of devices or
Discovery services
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
Protocols
Network Protocol Functions

• Devices use agreed-upon protocols

to communicate .
• Protocols may have may have one or
functions.

Function Description
Addressing Identifies sender and receiver
Reliability Provides guaranteed delivery
Flow Control Ensures data flows at an efficient rate
Sequencing Uniquely labels each transmitted segment of data
Error Detection Determines if data became corrupted during transmission
Application Interface Process-to-process communications between network applications
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
Protocols
Protocol Interaction

• Networks require the use of several protocols.

• Each protocol has its own function and format.

Protocol Function
Hypertext Transfer ▪ Governs the way a web server and a web client interact
Protocol (HTTP) ▪ Defines content and format
Transmission ▪ Manages the individual conversations
Control Protocol ▪ Provides guaranteed delivery
(TCP) ▪ Manages flow control
Internet Protocol Delivers messages globally from the sender to the receiver
(IP)
Ethernet Delivers messages from one NIC to another NIC on the same
Ethernet Local Area Network (LAN)
3.3 Protocol Suites

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 19
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
Protocol Suites
Network Protocol Suites
Protocols must be able to work with other
protocols.
Protocol suite:
• A group of inter-related protocols
necessary to perform a
communication function
• Sets of rules that work together to
help solve a problem
The protocols are viewed in terms of layers:
• Higher Layers
• Lower Layers- concerned with moving
data and provide services to upper
layers
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
Protocol Suites
Evolution of Protocol Suites

There are several protocol suites.

• Internet Protocol Suite or TCP/IP- The most
common protocol suite and maintained by the
Internet Engineering Task Force (IETF)
• Open Systems Interconnection (OSI)
protocols- Developed by the International
Organization for Standardization (ISO) and the
International Telecommunications Union (ITU)
• AppleTalk- Proprietary suite release by Apple
Inc.
• Novell NetWare- Proprietary suite developed
by Novell Inc.
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
Protocol Suites
TCP/IP Protocol Example

• TCP/IP protocols operate at the

application, transport, and
internet layers.
• The most common network
access layer LAN protocols are
Ethernet and WLAN (wireless
LAN).
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
Protocol Suites
TCP/IP Protocol Suite

• TCP/IP is the protocol suite used by

the internet and includes many
protocols.
• TCP/IP is:
• An open standard protocol suite that is
freely available to the public and can be
used by any vendor
• A standards-based protocol suite that is
endorsed by the networking
industry and approved by a
standards organization to
ensure interoperability
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
Protocol Suites
TCP/IP Communication Process

• A web server encapsulating and sending a • A client de-encapsulating the web page for
web page to a client. the web browser
3.4 Standards Organizations

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 25
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
Standards Organizations
Open Standards
Open standards encourage:
• interoperability
• competition
• innovation
Standards organizations are:
• vendor-neutral
• non-profit organizations
• established to develop and promote the
concept of open standards.
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
Standards Organizations
Internet Standards • Internet Society (ISOC) - Promotes the
open development and evolution of
internet
• Internet Architecture Board (IAB) -
Responsible for management and
development of internet standards
• Internet Engineering Task Force
(IETF) - Develops, updates, and
maintains internet and TCP/IP
technologies
• Internet Research Task Force (IRTF) -
Focused on long-term research related
to internet and TCP/IP protocols
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
Standards Organizations
Internet Standards (Cont.)
Standards organizations involved with the
development and support of TCP/IP
• Internet Corporation for Assigned
Names and Numbers (ICANN) -
Coordinates IP address allocation,
the management of domain names,
and assignment of other information
• Internet Assigned Numbers
Authority (IANA) - Oversees and
manages IP address allocation,
domain name management, and
protocol identifiers for ICANN
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
Standards Organizations
Electronic and Communications Standards

• Institute of Electrical and Electronics Engineers (IEEE, pronounced “I-triple-E”)

- dedicated to creating standards in power and energy, healthcare,
telecommunications, and networking
• Electronic Industries Alliance (EIA) - develops standards relating to electrical
wiring, connectors, and the 19-inch racks used to mount networking equipment
• Telecommunications Industry Association (TIA) - develops communication
standards in radio equipment, cellular towers, Voice over IP (VoIP) devices,
satellite communications, and more
• International Telecommunications Union-Telecommunication Standardization
Sector (ITU-T) - defines standards for video compression, Internet Protocol
Television (IPTV), and broadband communications, such as a digital subscriber line
(DSL)
3.5 Reference Models

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 30
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
Reference Models
The Benefits of Using a Layered Model

Complex concepts such as how a

network operates can be difficult to
explain and understand. For this
reason, a layered model is used.
Two layered models describe network
operations:
• Open System Interconnection (OSI)
Reference Model
• TCP/IP Reference Model
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
Reference Models
The Benefits of Using a Layered Model (Cont.)

These are the benefits of using a layered model:

• Assist in protocol design because protocols that operate at a specific layer have
defined information that they act upon and a defined interface to the layers above
and below
• Foster competition because products from different vendors can work together
• Prevent technology or capability changes in one layer from affecting other layers
above and below
• Provide a common language to describe networking functions and capabilities
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
Reference Models
The OSI Reference Model
OSI Model Layer Description
7 - Application Contains protocols used for process-to-process communications.
Provides for common representation of the data transferred between
6 - Presentation
application layer services.

5 - Session Provides services to the presentation layer and to manage data exchange.

Defines services to segment, transfer, and reassemble the data for individual
4 - Transport
communications.

3 - Network Provides services to exchange the individual pieces of data over the network.

2 - Data Link Describes methods for exchanging data frames over a common media.

Describes the means to activate, maintain, and de-activate physical

1 - Physical
connections.
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
Reference Models
The TCP/IP Reference Model

TCP/IP Model
Description
Layer
Application Represents data to the user, plus encoding and dialog control.

Transport Supports communication between various devices across diverse networks.

Internet Determines the best path through the network.

Network Access Controls the hardware devices and media that make up the network.
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
Reference Models
OSI and TCP/IP Model Comparison

• The OSI model divides the network

access layer and the application layer
of the TCP/IP model into multiple
layers.
• The TCP/IP protocol suite does not
specify which protocols to use when
transmitting over a physical medium.
• OSI Layers 1 and 2 discuss the
necessary procedures to access the
media and the physical means to send
data over a network.
3.6 Data Encapsulation

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 36
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
Data Encapsulation
Segmenting Messages
Segmenting is the process of breaking up
messages into smaller units. Multiplexing is
the processes of taking multiple streams of
segmented data and interleaving them
together.
Segmenting messages has two primary
benefits:
• Increases speed - Large amounts of data
can be sent over the network without tying
up a communications link.
• Increases efficiency - Only segments
which fail to reach the destination need to
be retransmitted, not the entire data
stream.
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
Data Encapsulation
Sequencing

Sequencing messages is the process of

numbering the segments so that the
message may be reassembled at the
destination.
TCP is responsible for sequencing the
individual segments.
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
Data Encapsulation Encapsulation is the process where protocols
Protocol Data Units add their information to the data.
• At each stage of the process, a PDU has a
different name to reflect its new functions.
• There is no universal naming convention for
PDUs, in this course, the PDUs are named
according to the protocols of the TCP/IP
suite.
• PDUs passing down the stack are as follows:
1. Data (Data Stream)
2. Segment
3. Packet
4. Frame
5. Bits (Bit Stream)
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
Data Encapsulation
Encapsulation Example
• Encapsulation is a top down
process.
• The level above does its
process and then passes it
down to the next level of the
model. This process is
repeated by each layer until it
is sent out as a bit stream.
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
Data Encapsulation
De-encapsulation Example
• Data is de-encapsulated as it moves up
the stack.
• When a layer completes its process, that
layer strips off its header and passes it
up to the next level to be processed.
This is repeated at each layer until it is a
data stream that the application can
process.
1. Received as Bits (Bit Stream)
2. Frame
3. Packet
4. Segment
5. Data (Data Stream)
3.7 Data Access

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 42
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
Data Access
Addresses

Both the data link and network layers use addressing to deliver data from source to
destination.
Network layer source and destination addresses - Responsible for delivering the IP
packet from original source to the final destination.
Data link layer source and destination addresses – Responsible for delivering the data
link frame from one network interface card (NIC) to another NIC on the same network.
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
Data Access
Layer 3 Logical Address

The IP packet contains two IP

addresses:
• Source IP address - The IP
address of the sending device,
original source of the packet.
• Destination IP address - The
IP address of the receiving
device, final destination of the
packet.
These addresses may be on the same
link or remote.
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
Data Access
Layer 3 Logical Address (Cont.)

An IP address contains two parts:

• Network portion (IPv4) or Prefix (IPv6)
• The left-most part of the address
indicates the network group which the
IP address is a member.
• Each LAN or WAN will have the same
network portion.
• Host portion (IPv4) or Interface ID (IPv6)
• The remaining part of the address
identifies a specific device within the
group.
• This portion is unique for each device
on the network.
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
Data Access
Devices on the Same Network

When devices are on the same network

the source and destination will have the
same number in network portion of the
address.
• PC1 – 192.168.1.110
• FTP Server – 192.168.1.9
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
Data Access
Role of the Data Link Layer Addresses: Same IP Network

When devices are on the same Ethernet

network the data link frame will use the
actual MAC address of the destination
NIC.
MAC addresses are physically embedded
into the Ethernet NIC and are local
addressing.
• The Source MAC address will be that of
the originator on the link.
• The Destination MAC address will
always be on the same link as the
source, even if the ultimate destination is
remote.
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
Data Access
Devices on a Remote Network
• What happens when the actual
(ultimate) destination is not on the same
LAN and is remote?
• What happens when PC1 tries to reach
the Web Server?
• Does this impact the network and data
link layers?
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
Data Access
Role of the Network Layer Addresses

When the source and destination have a

different network portion, this means
they are on different networks.
• PC1 – 192.168.1
• Web Server – 172.16.1
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
Data Access
Role of the Data Link Layer Addresses: Different IP Networks
When the final destination is remote, Layer 3 will
provide Layer 2 with the local default gateway IP
address, also known as the router address.
• The default gateway (DGW) is the router
interface IP address that is part of this LAN and
will be the “door” or “gateway” to all other remote
locations.
• All devices on the LAN must be told about this
address or their traffic will be confined to the
LAN only.
• Once Layer 2 on PC1 forwards to the default
gateway (Router), the router then can start the
routing process of getting the information to
actual destination.
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
Data Access
Role of the Data Link Layer Addresses: Different IP Networks (Cont.)

• The data link addressing is local

addressing so it will have a source and
destination for each link.
• The MAC addressing for the first
segment is :
• Source – AA-AA-AA-AA-AA-AA
(PC1) Sends the frame.
• Destination – 11-11-11-11-11-11
(R1- Default Gateway MAC)
Receives the frame.
Note: While the L2 local addressing will change from link to
link or hop to hop, the L3 addressing remains the same.
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
Data Access
Data Link Addresses
• Since data link addressing is local addressing, it will have a source and destination for
each segment or hop of the journey to the destination.
• The MAC addressing for the first segment is:
• Source – (PC1 NIC) sends frame
• Destination – (First Router- DGW interface) receives frame
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
Data Access
Data Link Addresses (Cont.)

The MAC addressing for the second hop is:

• Source – (First Router- exit interface) sends frame
• Destination – (Second Router) receives frame
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
Data Access
Data Link Addresses (Cont.)

The MAC addressing for the last segment is:

• Source – (Second Router- exit interface) sends frame
• Destination – (Web Server NIC) receives frame
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
Data Access
Data Link Addresses (Cont.)

• Notice that the packet is not modified, but the frame is changed, therefore the L3 IP
addressing does not change from segment to segment like the L2 MAC addressing.
• The L3 addressing remains the same since it is global and the ultimate destination is still the
Web Server.
Data Access
Lab – Use Wireshark COLLEGE
to INSTITUTE
View Network TrafficAND AND
OF INFORMATION
OF INFORMATION COMPUTING
COMPUTING SCIENCES
SCIENCES

In this lab, you will do the following:

• Part 1: Capture and Analyze Local ICMP Data in Wireshark
• Part 2: Capture and Analyze Remote ICMP Data in Wireshark
3.8 Module Practice and Quiz

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 57
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
Module Practice and Quiz
What did I learn in this module?
The Rules
• Protocols must have a sender and a receiver.

• Common computer protocols include these requirements: message encoding,

formatting and encapsulation, size, timing, and delivery options.
Protocols
• To send a message across the network requires the use of several protocols.

• Each network protocol has its own function, format, and rules for communications.

Protocol Suites
• A protocol suite is a group of inter-related protocols.

• TCP/IP protocol suite are the protocols used today.

Standards Organizations
• Open standards encourage interoperability, competition, and innovation.
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES
Module Practice and Quiz
What did I learn in this module? (Cont.)
Reference Models
• The two models used in networking are the TCP/IP and the OSI model.
• The TCP/IP model has 4 layers and the OSI model has 7 layers.
Data Encapsulation
• The form that a piece of data takes at any layer is called a protocol data unit (PDU).
• There are five different PDUs used in the data encapsulation process: data, segment,
packet, frame, and bits
Data Access
• The Network and Data Link layers are going to provide addressing to move data through
the network.
• Layer 3 will provide IP addressing and layer 2 will provide MAC addressing.
• The way these layers handle addressing will depend on whether the source and the
destination are on the same network or if the destination is on a different network from the
source.
 INSTITUTE
COLLEGE OF INFORMATION
OF INFORMATION AND AND COMPUTING
COMPUTING SCIENCES
SCIENCES

Let’s play