Scribd
Upload
18 views6 pages

Code Debugging Questions

The document outlines a circuit debugging examination for EMICA'25 at Tamilnadu College of Engineering, consisting of multiple-choice questions and short answer prompts. It covers topics such as boolean expressions, electronic components, op-amps, transformers, and inductors. The exam is designed to assess students' understanding of fundamental concepts in electrical engineering and electronics.

Uploaded by

ece
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
18 views6 pages

Code Debugging Questions

The document outlines a circuit debugging examination for EMICA'25 at Tamilnadu College of Engineering, consisting of multiple-choice questions and short answer prompts. It covers topics such as boolean expressions, electronic components, op-amps, transformers, and inductors. The exam is designed to assess students' understanding of fundamental concepts in electrical engineering and electronics.

Uploaded by

ece
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

TAMILNADU COLLEGE OF ENGINEERING

Coimbatore
EMICA’25
Circuit Debugging
NAME :
ROLL NO :
YEAR & DEPT :
COLLEGE :
ROUND 1 Duration : 30 mins
1. The boolean expression for P is

2. Match the following

a.Thermistor 1. Mechanical force

b.Photoconductive cell 2.Temperature

c.Strain gange 3.Light

3. The voltage across a forward biased Si diode is

(a) 0.3 V
(b) 0 V
(c) 0.7 V
(d) Dependent on the bias voltage.

4. The n-region in a PNP transistor is ___________


5. Which of the following according to KVL must be zero?

(a) Algebraic sum of currents in closed-loop

(b) Algebraic sum of power in closed-loop

(c) Algebraic sum of losses in closed-loop

(d) Algebraic sum of voltages in closed-loop

6. Name any 3 commonly used number systems in digital electronics.

Ans:

7. Two currents that are nearly the same in normal operation of the transistor are

(a) collector and base

(b) collector and emitter

(c) base and emitter

(d) input and output

8. What happens if in an OP-AMP the Feedback resistor is open? Assume negative feedback
configuration

Ans:

9 . If the current in a coil is AC, the amplitude of MMF is of the nature.

(a) varies with time but not with space

(b) varies with space but not with time

(c) varies with both space and time

(d) doesn’t vary with both space and time


10. A sound wave has a frequency of 250Hz. What is its time period?

Ans:

11. The process of adding impurity atoms to a pure semiconductor is called?

(a) Recombination

(b) Crystallization

(c) Doping

(d) Bonding

12. For the given op-amp configuration, find the value of feedback resistor

Ans:

13. A Thermocouple
(a) Produces a change in resistance for a change in temperature
(b) produces a change in voltage for a change in temperature
(c) is made of two dissimilar metals
(d) Both (b) and (c)

14. What is the maximum possible speed of the transformer in R.P.M?


Ans:
15. Which of the following will happen in a transformer when the number of secondary turns is less
than the number of primary turns?
(a) The voltage gets stepped up
(b) The voltage gets stepped down
(c) The power gets stepped up
(d) The power gets stepped down
16. Find Output voltage Vo of the following circuit.

Ans:

17. Find the current through the 4 Ω resistor.


Ans:

18. What is the unit of resistivity?


(a) Ohms
(b) Mho meter
(c) Mho
(d) Ohm meter
19. Determine the output waveform of the following circuit when the input is a 50Hz
Sine wave.
Ans:

20. Find the Correct Bridge Rectifier.

Ans:

21. Identify the Forward Biased Diode(s)

(a) D1
(b) D2
(c) D3
(d) D1 and D3
22. If a single diode in centre-tapped full-wave rectifier opens the output will be
(a) 0 V
(b) half-wave rectified
(c) reduced in amplitude
(d) unaffected

23. Which of the following elements of electrical engineering cannot be analyzed


using Ohm’s law?
(a) Capacitors
(b) Inductors
(c) Transistors
(d) Resistance

24. A 2mH, a 3.3mH, and a 0.2mH inductor are connected in series. The total
inductance is
(a) 5.5mH
(b) less than 5.5mH
(c) less than 0.2mH
(d) 55mH

25.In the given logic circuit, the output Y is

Ans:

You might also like