Scribd
Upload
21 views4 pages

01 Live Camera Feed

This document provides instructions for connecting to the ESP32-S3 vision module to access a live camera feed via a hotspot. It outlines the steps for device connection, starting image transmission, and optional firmware flashing. Users are advised to ensure proper driver installation and follow specific steps for successful firmware updates if needed.

Uploaded by

Ywhite Eric
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
21 views4 pages

01 Live Camera Feed

This document provides instructions for connecting to the ESP32-S3 vision module to access a live camera feed via a hotspot. It outlines the steps for device connection, starting image transmission, and optional firmware flashing. Users are advised to ensure proper driver installation and follow specific steps for successful firmware updates if needed.

Uploaded by

Ywhite Eric
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Live Camera Feed

In this section, you can learn how to connect to the hotspot generated by the
ESP32-S3, and then log into a provided URL to view the live camera feed.
Note: if you are unable to use the live camera feed function or have downloaded other

program firmwares, please reflash the image transmission firmware. This allows you to

use the live camera feed function.

To download the firmware, please refer to “2. Image Postback Firmware Flashing

(Optional)” in this section.

1. Device Connection
1) Connect the ESP32-S3 vision module to the computer with a Type-C cable.
Check if the port is connected properly in the device manager.

Note: If you cannot find the device in the port, it may be because the computer does not

have the driver installed. You can find the installation package in the "2.Software

Tools\ch34x Driver (Windows Environment)" to install it.

2) The camera will generate a hotspot named “HW_ESP32S3CAM”. Click to


connect.

1
The above connection operation is carried out under the AP direct connection
mode. The vision module also supports connection under the STA LAN mode.
For more detailed information, please refer to "4.Expanded Tutorial".

2. Start Image Transmission


Enter "192.168.5.1" in the browser address bar. Both mobile and PC browsers

are applicable. Let’s take PC as an example. Click the button

on the opened page to start image transmission.

3. Image Postback Firmware Flashing (Optional)


1) Connect the ESP32-S3 to the computer.
2) Double click and open “flash_download_tool_3.9.7” file in the “2.Software

2
Tools\4.Firmware Flashing Tools”.

3) Then, select “ESP32-S3” in the opening interface.

4) In the flashing interface, click to select the firmware (“5.3 Live Camera

Feed/02 Firmware & Tool/image_transmit.bin”).

5) Next, select the configuration as follows. Select a port number. The port
number relies on the actual situation. Avoid selecting COM1, as it may result in
unsuccessful flashing.

3
6) Click “ERASE” to erase the underlayer firmware. You must do this step first.
Next, click “START” to start flash.

7) After a while, the “FINISH” prompt will come out.

8) Then disconnect Type-C cable.

Note: After flashing is completed, the module needs to be restarted.

You might also like