Nasik Institute of Technology’s (NIT)

Late Annasaheb Patil Polytechnic, Nashik. 422003

DEPARTMENT OF COMPUTER ENGINEERING

FORMAT FOR PROJECT REPORT2024-25

(The report should be with book hard binding)
TYCO (Computer Engineering)
Project Report Preparation Guidelines and Contents:
Comprehensive report preparation about the project is the requisite for every student. The format for the
report is prescribed below. It is important that you adhere to these guidelines.
1. ARRANGEMENT OF CONTENTS:
The sequence in which the project report material should be arranged and bound should be as follows:
 Title page (with name of team member and mentor teacher)
 Certificate
 Sponsor’s Certificate / Completion Certificate (if applicable)
 Achievement / Participation Certificate(s) (If applicable)
 Acknowledgment
 Abstract (in one paragraph not more than 150 words)
 Table of contents
 Index of Figures & Index of Tables (if applicable)
 Chapter 1 to 9: (As preared)
 Appendix (if any)
 References/ Bibliography
 Published/Presented Papers

Nasik Institute of Technology’s (NIT)

Late Annasaheb Patil Polytechnic, Nashik. 422003
DEPARTMENT OF COMPUTER ENGINEERING

FORMAT FOR PROJECT REPORT 2024-25

(The report should be with Black book hard binding)
TYCO (Computer Engineering)
Project Report Preparation Guidelines and Contents:
1. Chapters – The chapters may be broadly divided as below :

1. Introduction (02-03 Pages)

1.1 Literatute Survey (02-03 Pages)
1.2 Existing System (01-02 Pages)
1.3 Proposed System (02-03 Pages)
2. Analysis & Feasibility (02-03 Pages)
3. Project Requrments (04-06 Pages)
 About Proposed project
 Area of implementation
 Software / System Requirements Specifications (SRS) of the Project (What the Project shall do )
 Hardware requrment
a) Project Development
b) Project Operations \Use
 Software requrment
a) Project Development
b) Project Operations \Use
4. Project Design and Implementations (Code) (04-05 Pages)
 System Context/Level diagram and description (if applicable)- (02-03 Pages)
 File /Database Designs (as applicable), ER Diagrams (as applicable) (02-03 Pages)
 Components design, DFD-0,DFD-1, DFD-2(all compulsory), UML diagrams[AS APLLICABLE &
USE][with explainations of each diagram with reference to the project contents.] (04-05 Pages)
 Module designs and details of implementationswith following for each
Major/Important Module:( Each Module -02-04 pages) (Minimum 5 Major Modules)
o Module Title/Name
o Purpose of Module
o Inputs and Outputs for Module
o Files Used by Module
o Algorithm/ Procedural steps / Pseudo code
o Data flow Diagram/ Sequence Diagram with explaination (if any)
o Module wise Coding.
 User insterface designs - Input and Output Designs (02-03 Pages)

5. Result and Outputs/ Screen Shots with Explaination. (02-03 Pages)

6. Testing (if performed) (with Test tools details, Test data, Test cases and results) (04-05 Pages)
7. Costing of the project (– detailed calculations) (02-03 Pages)
8. Applications (Described) (02-03 Pages)
9. Future Enhancement/ Scope (Described) (01-02 Pages)
10. Conclusion. (01-Page)
11. References /Bibliography (Follow Standard Guidelines) (2-3 Pages)
 Books
 Papers
12. Web URLsPublished /Presented Papers (Details of presentation if any)

3. PAGE DIMENSION AND BINDING SPECIFICATIONS:

 The dimension of the project report should be in A4 size. One copy of the report should be submitted to
department and each Project Group members shall have a copy.

4. PREPARATION FORMAT:

4.1 Title Page- A specimen copy of the Title page is given in Appendix 1a.
4.2 General Instructions for preparing the report contents.

Paper Size : A- 4 size bond paper only.

a. Margins :
Top : 1”
Bottom : 1”
Left : 1.50”(compulsory)
Right : 1”
b. Line Spacing : 1.15 line
c. Title of Chapter
Font: Times New Roman (Bold face), Size: 16 point
Alignment: Left Alignment
One thick Horizonalline (2¼ point weight) after the name of chapter
d. Headings
First Order Heading: (Example – 1. INTRODUCTION)
Font: Times New Roman (Bold Face)
Size: 14 point
One blank line before the heading (12 points)

Second Order Heading: (for example – 1.1. Evolution)

Font: Times New Roman ( Bold Face)
Size: 14 point
One blank line before the heading (12 points)

Third Order Heading: (for example – 1.1.1. Clustering)

Font: Times New Roman (Bold Face)
Size: 14 point
One blank line before the heading (12 points)
e. Text:
Font: Times New Roman
Size: 12 point
Line Indent: First line of every paragraph should be indented By 1 cm. (Except first paragraph
*)
* No indent should be applied to first line of first paragraph under any Heading / Sub-
Heading Alignment: Justified (Full Text)

5. Abstract (up to 150 words)

 Heading (i.e. ABSTRACT)
Font: Times New Roman (BOLD Face)
Size: 16 point
Alignment: center
Two blank lines after the heading. (12 points)
Remaining Text
Font: Times New Roman
Size: 14 point
Alignment: Justified (Full Text)
Keywords Font: Times New Roman (Italic face)
Size: 14 point
6. Figures and Tables:
Caption
Font: Garamond (Bold)
Size: 12 point
Alignment: Centered
Figure Caption must be below the figure and centered, Table caption must
be above the table and centered with sub topic numbering.
(Eg: fig:1.2.1 Class Diagram of AutomatedNavigation System below the
figure)
(Eg: Table:1.2.3 Student Information  above the table )

7. Page Numbering (Centered)

Title page, Table of Content, Figure Index, Table Index: Roman (I, II,III etc.)
For Remaining Pages (i.e. from ABSTRACT -to- BIBLIOGRAPHY) : 1, 2, 3 ……
N

8. Page Border
 Don’t apply any type of Border or Page Border for any page.
 Don’t add any page (blank or Title of Chapter) between two chapters.
 Index, List of figures & List of Tables must be justified.

9. References / Bibliography
 The listing of references should be typed 2 spaces below the heading REFERENCES” in
alphabetical order in single spacing justified alignment.
 Should be numbered consecutively in square [] brackets, throughout the text and should be
collected together in the reference list at the end of your report.
 The references should be numbered in the order they are used in the text. The name of the
author/authors should be immediately followed by the year and other details.
 URL must be in Italics.
 E. g for references for
o Papers, Journals and books
[1] A. Rezi and M. Allam, "Techniques in array processing by means of transformations, " in Control
and Dynamic Systems, Vol. 69, Multidemsional Systems, C. T. Leondes, Ed. San Diego: Academic
Press, 1995, pp. 133-180.
o Websiterefernce :
[2] “Author Guidelines”, http://.computer.org/cspress/instruct.htm
MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION, MUMBAI

“ Add your Project Title ”

A Project Report

Submitted by:

Sr. No. Name of Student Exam Seat No.

1) Project Leader :____________
2) Member 1 :____________
3) Member 2 :____________
4) Member 3 :____________

In partial fulfillment for the award of the Diploma Engineering

in the course Computer Engineering

DEPARTMENT OF COMPUTER ENGINEERING

Nasik Institute of Technology’s (NIT’S)
Late Annasaheb Patil Polytechnic, Nashik. 422003
Academic Year 2024-25
MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION, MUMBAI
A
Project Report
on

“ Add your Project Title ”

Submitted by:

Sr. No. Name of Student Exam Seat No.

1) Project Leader :____________
2) Member 1 :____________
3) Member 2 :____________
4) Member 3 :____________

Under the Guidance of:

Name of Guide:Mr/Mrs/Ms._______________________
Designation : Lecturer in Computer Engineering

DEPARTMENT OF COMPUTER ENGINEERING

Nasik Institute of Technology’s (NIT’S)
Late Annasaheb Patil Polytechnic, Nashik. 422003
Academic Year 2024-25
 Nasik Institute of Technology’s (NIT’S)

Late Annasaheb Patil Polytechnic

Hirawadi, Panchavati, Nashik-422003, Maharastra

Certificate
This is certify that :
Name of Student Class Enrolment No. Exam Seat No.

1.
2.
3.
4.

From the institute - NIT’s Late Annasaheb Patil Polytechnic , Nashik has completed the Project
(Capstone ProjectPlanning and Execution (CPE)) for their final year having title ______ ____________
________ ____________________________________________________ during the Academic Year
2024-25 in the partial fulfillment of Diploma in Computer Engineering. The project is completed
byindividually/ in a group consisting of _____persons under the guidance of the Faculty Guide.
Date : / /2025
Place : Nashik

(Name&Dated Sign of InternalGuide) Prof. Megha. P. Shinde

Internal Faculty Guide HOD- Computer Engineering

Seal of
Institute

( Sign of Industry Guide/ Mentor) Prof. Gopal V. Wadnere

Name: Principal
Designation: NIT’s Late Annasaheb Patil Polytechnic , Nashik
Contact:
email ID :
Page 3: Sponsor’s Certificate

<Attach in portrait the original Sponsor’s Certificate for institute Copy here…..>
<and the Color copy ofSponsor’s Certificate Copy herefor members…..>

Page 4: IIC Participation Certificate/ Appreciation Certificate(s)

<Attach Portrait/Landscape color Participation / Achivement Certificate copy/copies here…..>

PAGE 5: Acknowledgement

ACKNOWLEDGEMENT (sample on separate blank page)

With deep sense of gratitude we would like to thanks all the people who have lit our path with their kind
guidance. We are very grateful to these intellectuals who did their best to help during our project work.
It is our proud privilege to express deep sense of gratitude to, Prof. Gopal V. Wadnere,
Principal, NIT’s Late Annasaheb Patil Polytechnic , Nashik for his comments and kind permission to
complete this project. We remain indebted to Prof. Megha. P. Shinde, Head of Computer Engineering
Department for his timely suggestion and valuable guidance.
The special gratitude goes our external guide Mr./Ms.___________________,<designation>at <name
of industry and full address> for their sponsorship permissions and directions for our project selection
and implementations. We are greateful and remain indebt to our Internal Guide
Mr./Mrs./Ms.____________________,for his/her consistent instructions, guidance for the completion
of project.

We are thankful to all Faculty members, Technical staff members of Computer Technology
Department for their expensive, excellent and precious guidance in completion of this work. We thanks
to all the class colleagues for their appreciable help for our working project.

With various industry owners or lab technicians to help, it has been our endeavor to through out
our work to cover the entire project work.

We also thankful to our parents who providing their wishful support for our project completion
successfully.Lastly we thanks to our all friends and the people who are directly or indirectly related to
our project work.
Names of Students
1) class:
2) class:
3) class:
4) class:
Page 6: Vision & Mision
Institute Vision : -Strive to empower students with Quality Technical Education.

Institute Mission :- Committed to develop students as Competent and Socially Responsible

Diploma Engineers by inculcating learning to learn skills, values and ethics, entrepreneurial
attitude, safe and eco-friendly outlook and innovative thinking to fulfill aspirations of all the
stakeholders and contribute in the development of Organization, Society and Nation.

Department Vision :-To impart quality technical education for development of technocrats.

Department Mission :-

M1- To provide quality in education and facilities for students to help them to achieve higher
academic career growths.
M2- To impart education to meet the requirements of the industry and society by technological
solutions.
M3- Develop technical & soft skill through co–curricular and extra-curricular activities for
improving personality.

Program Educational Objectives:-

PEO1: Provide socially responsible, environment friendly solutions to Computer engineering

related broad-based problems adapting professional ethics.
PEO2: Adapt state-of-the-art Computer engineering broad-based technologies to work in multi-
disciplinary work environments.

PEO3: Solve broad-based problems individually and as a team member communicating

effectively in the world of work.

Program Specific Outcome:-(Version – 1.2)

PSO 1: Computer Software and Hardware Usage: Use state-of-the-art technologies for
operation and application of computer software and hardware.

PSO 2: Computer Engineering Maintenance: Maintain computer engineering related software

and hardware systems.

Program Outcomes:-
PO1. Basic and Discipline specific knowledge: Apply knowledge of basic mathematics, science
and engineering fundamentals and engineering specialization to solve the engineering
problems.
PO2. Problem analysis: Identify and analyse well-defined engineering problems using codified
standard methods.

PO3. Design/ development of solutions: Design solutions for well-defined technical problems and
assist with the design of systems components or processes to meet specified needs.

PO4. Engineering Tools, Experimentation and Testing: Apply modern engineering tools and
appropriate technique to conduct standard tests and measurements.

PO5. Engineering practices for society, sustainability and environment: Apply appropriate
technology in context of society, sustainability, environment and ethical practices.

PO6. Project Management: Use engineering management principles individually, as a team

member or a leader to manage projects and effectively communicate about well-defined
engineering activities.

PO7. Life-long learning: Ability to analyse individual needs and engage in updating in the context
of technological changes.

Page 7: Abstract
 The Smart Stick for Blind People with Mobile App Integration aims to enhance mobility and
independence for visually impaired individuals. This innovative device is equipped with sensors to detect
obstacles, water, and uneven surfaces, while the mobile application provides real-time navigation, emergency
assistance, and location sharing. By leveraging IoT and sensor technology, the system addresses accessibility
challenges, offering a comprehensive solution for a safer and more navigable environment.

Keywords: Smart stick, visually impaired, mobility aid, IoT, obstacle detection, navigation, accessibility, location
sharing, emergency assistance.

Page 8: Table of Content

Table of Contents
Sr.No. Name of topic Page no.
1 Abstract, Table Index, Figure Index, Acknowledgement, In Roman
Certificates, ie: I, II etc)
2 Introduction Page no1 starts
here
3 Literature Survey
4 ..
5 ..
6 ..
7 ..
8 ..
9 Advantage and Disadvantage
10 Result
11 Conclusion
12 Future Scope
13 References
Appendix-1 In Roman

Page 9: Index of Figures

 Index of Figures
Fig.No. Name of figure Page no.
1.2
2.1
…

* 1.2 indicates Figure no.2 from Chapter no.1& so on…..

Page 10:Index of Tables

Index of Tables
Tab.No. Title of Table Page no.
1.2
2.2

* 1.2 indicates Table no.2 from Chapter no.1& so on…

 REFERENCES
(Format)

 Author Name
 Title of chapter followed by, In:
 Editor (always put (ed.) after the name)
 Title (this should be in italics)
 Series title and number (if part of a series)
 Edition (if not the first edition)
 Place of publication (if there is more than one place listed, use the first named)
 Publisher
 Year of publication
 Page numbers (use ‘p.’ before single and multiple page numbers)

(example)
[1] A. Rezi and M. Allam, "Techniques in array processing by means of transformations, " in Control and Dynamic Systems, Vol.
69, Multidemsional Systems, C. T. Leondes, Ed. San Diego: Academic Press, 1995, pp. 133-180.
[2] G. O. Young, "Synthetic structure of industrial plastics," in Plastics, 2nd ed., vol. 3, J. Peters, Ed. New York: McGraw-Hill,
1964, pp. 15-64.
 [3] S. M. Hemmington, Soft Science. Saskatoon: Univ. of Saskatchewan Press, 1997.
[4] N. Osifchin and G. Vau, "Power considerations for the modernization of telecommunications in Central and Eastern European
and former Soviet Union (CEE/FSU) countries," in Second Int. Telecommunications Energy Special Conf., 1997, pp. 9-16.

Page 11: Published/Presented Paper page:

<Add this page afer Reference Page; if any>

1) Summery of Paper Published/Presented…<on seperat page>

Level
(International/National Date of
Sr. No. Title of Paper Venue Award won
/State/District ) and publication
publication details
1
2

2) Base Paper (Hard copy):<on sepereate page after summary detail…>

<Print base paper (original paper) presented at Event……>

NOTE:-

Project report is an important document for every diploma holder. At institute level, we have to maintain
uniformity.

 It is responsibility of all project guides to inform and circulate above project report format to every
individual student and ask them to implement the same.
 Follow the format,any modification / changes can not be consider.
 Do not add any watermark in project report.
 Kindly verify the format, content &grammer of the statements of the students and update it
accordingely...
 Follow the schedule strictly….