Scribd
Upload
14 views4 pages

User Manual For ERom UPgrade Tool

The document provides step-by-step instructions for upgrading software on an STB using the EromUPgrade.exe tool. It includes details on connecting the STB to a computer, configuring settings such as port and bits rate, and completing the upgrade process. The final step confirms the successful completion of the upgrade.

Uploaded by

degefachewaka
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
14 views4 pages

User Manual For ERom UPgrade Tool

The document provides step-by-step instructions for upgrading software on an STB using the EromUPgrade.exe tool. It includes details on connecting the STB to a computer, configuring settings such as port and bits rate, and completing the upgrade process. The final step confirms the successful completion of the upgrade.

Uploaded by

degefachewaka
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

1.

Make sure that the STB is connected with the computer through the
RS232 cable.

2. Click the ”EromUPgrade.exe” icon: , you will see


the picture as below:

3. Please set the “Port” to be the right one in you side.

Set the “Bits Rate” to be “115200”.

Set parity to be “Even”.

Choose the “Operate Mode” to be “Upgrade”.

Click the “Browse” to choose the software you need to upgrade.

Set the “Include Bootloader” to be select. Then you will see the picture
as below:
4. Click the “Next” button, you will see the picture as below:

5. Reset the STBs. You will see the picture as below:


it will take several minutes. Then you will see the picture as below:

6. Clikc the “Next” to burn the flash. Then you will see the picture as
blow:
7. Click the “Finished” button. It mean that the upgrade succeed.

You might also like