Scribd
Upload
2 views

Assignment-04

This document is an assignment for the CE-463 Irrigation Engineering course at NUST Institute of Civil Engineering, with a deadline of May 8, 2024. It includes two questions related to weir design and calculations for discharge flow. Handwritten solutions are required for submission via the LMS platform.

Uploaded by

altphantom48
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
2 views

Assignment-04

This document is an assignment for the CE-463 Irrigation Engineering course at NUST Institute of Civil Engineering, with a deadline of May 8, 2024. It includes two questions related to weir design and calculations for discharge flow. Handwritten solutions are required for submission via the LMS platform.

Uploaded by

altphantom48
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

NUST Institute of Civil Engineering

School of Civil and Environmental Engineering


CE-463 Irrigation Engineering
Assignment No. 4
DEADLINE: 08 May 2024
NOTE: Submission Link @LMS & Only Handwritten Solution is Acceptable

Q1 A weir of 8m long is to be built across a rectangular channel to discharge a flow of 9 m3/s. If the
maximum depth of water on the upstream side of weir is to be 2 m, what should be the height of the
weir? Adopt Cd = 0.62.

Q2 Determine the maximum discharge over a broad-crested weir 60 meters long having 0.6 m height of
water above its crest. Take coefficient of discharge as 0.595.

You might also like