Technical Bulletin Alcatel-Lucent OmniPCX Office

TC1972 ed.05 Release 10.3

LIMITS AND DIMENSIONING FOR OMNIPCX OFFICE

R10.3

This document gives details of system limits and dimensioning rules of OmniPCX Office R10.0, R10.1, R10.2 & R10.3

Revision History

Edition 1: November 17, 2014 creation of the document

Edition 2: May 7, 2015 Release 10.1
Edition 3: December 7, 2015 Release 10.2
Edition 4: May 31, 2016 Release 10.3
Edition 5: August 4, 2016 update

Legal notice:
The information presented is subject to change without notice.
ALE International assumes no responsibility for inaccuracies contained herein.
Copyright © ALE International 2016
Table of contents
1 Hardware requirements for R10.3 ............................................................................................................ 3
2 Feature level depending on hardware storage ........................................................................................... 3
2.1 With PowerCPU EE ............................................................................................................................ 3
2.2 With PowerCPU ................................................................................................................................. 3
3 Hardware - Generic rules ......................................................................................................................... 4
3.1 Daughterboard equipment matrix PowerCPU EE .................................................................................. 4
3.2 Daughterboard equipment matrix PowerCPU ...................................................................................... 4
3.3 Specific Hardware Limits of CE (Compact Edition) cabinet.................................................................... 4
4 Slot distribution & equipment rules ........................................................................................................... 5
4.1 OmniPCX Office RCE Small Rack ........................................................................................................ 5
4.2 OmniPCX Office RCE Medium Rack ..................................................................................................... 6
4.3 OmniPCX Office RCE Large Rack ........................................................................................................ 7
5 Alcatel OmniPCX Office limits ................................................................................................................... 8
6 Alcatel OmniPCX Office Power Budget .................................................................................................... 13

Alcatel-Lucent OmniPCX Office - Release 10.3

Limits and Dimensioning for OmniPCX Office R10.3 TC1972 ed.05
Copyright © ALE International 2016 page 2/16
 1 Hardware requirements for R10.3

CPU delivered in newly ordered R10.3 OmniPCX Office systems

 PowerCPU EE – Freescale MPC8377 processor at 800 MHz – 512 Mb DDR RAM – 8Gb MSDB (eMMC)

CPU compatible with OXO release 10.0, R10.1, R10.2 & R10.3

 PowerCPU – Freescale MPC8377 processor at 667 MHz – 256 Mb DDR RAM – 2Gb SDCard

2 Feature level depending on hardware storage

2.1 With PowerCPU EE

PowerCPU EE

Feature ACD IM
Storage VMU level Statistic (Instant Message)
Device
MSDB 5000
Up to 200 hr Yes
(always equipped) (max. 60 days)

Note Hard disk is no longer required on a PowerCPU EE – all data are stored on the MSDB daughter board

2.2 With PowerCPU

PowerCPU

Feature IM
ACD
Storage VMU level (Instant Message)
Statistic
Device
Without Hard
Up to 30 hr No 1000
Disk
(max. 10 days)
With Hard Disk Up to 200 hr Yes

Alcatel-Lucent OmniPCX Office - Release 10.3

Limits and Dimensioning for OmniPCX Office R10.3 TC1972 ed.05
Copyright © ALE International 2016 page 3/16
3 Hardware - Generic rules

3.1 Daughterboard equipment matrix PowerCPU EE

Storage/Daughter boards PowerCPU EE
DDR 512 Mb Yes (mandatory)
MSDB 8 Gb (Mass Storage Daughter Board) Yes (mandatory)
HSL1 Yes (optional)
HSL2 Yes (optional)
AFU-1 Yes (optional)
Armada VoIP 32 Yes (optional)

3.2 Daughterboard equipment matrix PowerCPU

Storage/Daughter boards PowerCPU
DDR 256 Mb Yes (mandatory)
SDCard 2Gb Yes (mandatory)
Hard-Disk (minimum 20Gb) Yes (optional)
HSL1 Yes (optional)
HSL2 Yes (optional)
AFU-1 Yes (optional)
Armada VoIP 32 Yes (optional)

3.3 Specific Hardware Limits of CE (Compact Edition) cabinet

o No SLI16
o No APA8
o No DDIx
o No HSL daughterboard on main CPU
o No PowerMEX board
o PowerCPU with hard disk is allowed with following constraint:
 external power supply with battery unit is mandatory,
 PSXS-N with reference 3EH73072ACxx is mandatory,
 the jumper "extBAT" must be set to 'YES'.

Alcatel-Lucent OmniPCX Office - Release 10.3

Limits and Dimensioning for OmniPCX Office R10.3 TC1972 ed.05
Copyright © ALE International 2016 page 4/16
4 Slot distribution & equipment rules

4.1 OmniPCX Office RCE Small Rack

BOARD SLOT 1 SLOT 2 CPU

PowerCPU EE
No No Yes- Mandatory
PowerCPU
PowerMEX No No Yes- Mandatory
MIX x/y/z, MIX x/y/z-1, MIX x/y/z-2 Yes- Preferred Yes No
AMIX x/y/z-1 Yes- Preferred Yes No
SLIx / SLIx-1 / SLIx-2
Yes- Preferred Yes No
SLI8 / SLI8-1 / SLI8-2
SLI16 / SLI16-1 / SLI16-2 No No No
UAI4 / UAI8 / UAI16 / UAI16-1 Yes- Preferred Yes No
BRA2 / BRA4 / BRA8 Yes Yes- Preferred No
PRA-T2 / PRA-T1 / DASS2 / DLT2
Yes Yes- Preferred No
T1-CAS / PCM-R2 / T1-CSS
LANX8 / LANX16 / LANX16-1
Yes Yes- Preferred No
LANX8-2 / LANX16-2
ATA2 / ATA4 Yes Yes- Preferred No
APA4 / APA8 Yes Yes No
DDI2 / DDI4 No No No

Restrictions:

- SLI16 or DDIx boards are not allowed.

- Empty slot must always be completed with a Blind slot board (electromagnetic compatibility).

Alcatel-Lucent OmniPCX Office - Release 10.3

Limits and Dimensioning for OmniPCX Office R10.3 TC1972 ed.05
Copyright © ALE International 2016 page 5/16
4.2 OmniPCX Office RCE Medium Rack

BOARD SLOT 1& 3 SLOT 2& 4 SLOT 5 CPU

PowerCPU EE
No No No Yes- Mandatory
PowerCPU
PowerMEX No No No Yes- Mandatory
MIX x/y/z, MIX x/y/z-1, MIX x/y/z-2 Yes- Preferred Yes Yes No
AMIX x/y/z-1 Yes- Preferred Yes Yes No
SLIx / SLIx-1 / SLIx-2 Yes- Preferred Yes Yes No
UAI4 / UAI8 / UAI16 / UAI16-1 Yes- Preferred Yes Yes No
BRA2 / BRA4 / BRA8 Yes Yes- Preferred Yes No
PRA-T2 / PRA-T1 / DASS2 / DLT2 /
Yes Yes- Preferred Yes No
T1-CAS / PCM-R2 / T1-CSS
LANX8, LANX16, LANX16-1
Yes Yes Yes- Preferred No
LANX8-2, LANX16-2
ATA2 / ATA4 Yes Yes- Preferred Yes No
APA4 / APA8 Yes Yes- Preferred Yes No
DDI2 / DDI4 Yes Yes- Preferred Yes No

Reminder :

- Empty slots must always be completed with a Blind slot board (electromagnetic compatibility).

Alcatel-Lucent OmniPCX Office - Release 10.3

Limits and Dimensioning for OmniPCX Office R10.3 TC1972 ed.05
Copyright © ALE International 2016 page 6/16
4.3 OmniPCX Office RCE Large Rack

BOARD SLOT 1 SLOT 2-3-4 SLOT6-7 SLOT 5-8 CPU

PowerCPU EE
No No No No Yes- Mandatory
PowerCPU
PowerMEX No No No No Yes- Mandatory
MIX x/y/z, MIX x/y/z-1 Yes- Preferred Yes- Preferred No No No
AMIX x/y/z-1 Yes- Preferred Yes- Preferred No No No
SLIx / SLIx-1 / SLIx-2 Yes- Preferred Yes- Preferred Yes Yes No
UAI4 / UAI8 Yes- Preferred Yes- Preferred Yes Yes No
UAI16 / UAI16-1 Yes- Preferred Yes- Preferred No No No
BRA2 / BRA4 / BRA8 Yes Yes Yes- Preferred Yes No
PRA-T2 / PRA-T1 / DASS2 /
DLT2 / T1-CAS / PCM-R2 / T1- Yes Yes Yes- Preferred Yes No
CSS
LANX8 / LANX16 / LANX16-1 /
Yes Yes Yes Yes No
LANX8-2 / LANX16-2
ATA2 / ATA4 Yes Yes Yes- Preferred Yes No
APA4 Yes Yes Yes- Preferred Yes No
APA8 Yes No Yes- Preferred Yes No
DDI2 / DDI4 Yes Yes Yes- Preferred Yes No

Restrictions:
- UAI16 and UAI16-1 can only be equipped in slot 1-2-3-4.
- APA8 can only be equipped in slot 1,5,6,7 and 8.
- MIX x/y/z and MIX x/y/z-1 can only be equipped in slot 1-2-3-4.
- AMIX x/y/z-1 can only be equipped in slot 1-2-3-4.
- APA8 board operates as an APA4 if located in slot 2-3-4.
- Empty slots must always be completed with a Blind slot board (electromagnetic compatibility).

Alcatel-Lucent OmniPCX Office - Release 10.3

Limits and Dimensioning for OmniPCX Office R10.3 TC1972 ed.05
Copyright © ALE International 2016 page 7/16
5 Alcatel OmniPCX Office limits
System limits linked to the software license are not indicated.
Values between brackets are the Compact Edition limits.

System Rack 1/(CE) Rack 2 Rack 3 max.

Number of slots (including all boards) 3 (2) 6 9 27
UAI16 / UAI16-1 Boards 1 (1) 3 4 12
SLI16 / SLI16-x Boards 0/(0) 2 5 12
UAI16 / UAI16-1 Boards + MIX Boards 2 (1 mixed ) 5 4 12
Armada VoIP 32 Daughterboard 1 (1) 1 1 1
LANX 16-1/2 Boards 2 (1) 4 8 12
1 LANX16 1 LANX16
LANX Boards 2 LANX16 6 LANX16
(1 LANX16) +1 LANX8
SATA Hard disk - PowerCPU EE 0 0
SATA Hard disk - PowerCPU 1 1
Capacity of the SATA hard disk Min 20Go / (Min 20Go) Min 20Go

Communication Ports Rack 1/(CE) Rack 2 Rack 3 max.

Max (UA+Z) users Ports 28 (18) 56 96 200
Max (UA ports) users Ports 24 (16) 56 96 200
Max (Z ports) users Ports 16 (10) 32 80 196
Analog Trunks (ATA – APA) 8 (4) 16 32 72
Analog Trunk DDI 0 16 32 72
PCM R2 Access 1 (1) 3
Basic Rate Access (T0+DLT0) 8 (4) 12 12
Primary Rate Access (T1+T2+DLT2) 1 (1) 3 9
T1 CAS Access /CCS voice only (US only) 1 (0) 3 5
ISDN Access (T0+DLT0+ T1+T2+DLT2) 8 (8) 12 12
VoIP Subscriber Channels 48 (48) 48 48
VoIP Trunk Channels H323 or SIP 48 (48) 48 48
Total Trunk (NDDI, DDI, PCM, T1, T2, T0, IP) 54 (52) 90 120 120

Users Rack 1/(CE) Rack 2 Rack 3 max.

Subscriber Numbers 250 * 250*
Z + UA Sets including Multi-Reflexes™ (wired) 28 (22) 56 96 236
UA ports including Multi-Reflexes™ (wired) 24 (16) 56 96 236
Z Sets 16 (10) 32 80 196
Simultaneous Ringing of Z Sets 6 (4) 8 20 60
Alcatel Series 9 + Reflexes terminals 24 (16) 56 96 236
Alcatel Series 9 + Reflexes + Analogue sets 28 (20) 56 96 236
OmniTouch 8082 My IC Phone 20 20
OmniTouch 4135 Conference module 3 3
Open SIP phone 120 120
SIP Companion 50 50

Alcatel-Lucent OmniPCX Office - Release 10.3

Limits and Dimensioning for OmniPCX Office R10.3 TC1972 ed.05
Copyright © ALE International 2016 page 8/16
Max IP Subscribers [ x8 Series + OT 8082/8232/4135 +
8002/8012 + SIP phone (Open/Basic) + PIMphony IP + 200 200
MIPT + SIP companion]
Virtual Terminals 200 200
IP PIMphony media 200 200
OTCV (My IC Mobile) 50 50

Hotel (Guest) Rack 1/(CE) Rack 2 Rack 3 max.

Room Sets 27 55 200** 200**
* Subscriber numbers include all terminals, virtual users and auxiliary ports (VMU, Remote Access).
** Including a maximum of 120 analog phones.

Reflexe Options Rack 1/(CE) Rack 2 Rack 3 max.

Add On Module
- max 2 per set for 4020/4035 10 (8) 40 60 136
- max 3 per set for 40x8/9 & 80x8/9
Plugware S0, V24, Z 12 (4) 24 42 48
Extension Direct Number per S0 (multiple EDN) 98 98
Multi-Reflexes (4099) 6 (4) 18
V24 Plugware for metering 1 1

DECT Mobility Rack 1/(CE) Rack 2 Rack 3 max.

IBS with Remote feeding (System) 4 (3) 4 4 12
IBS with "power splitter" on UAI16-1 and 40V adapter 16 (16) 48 60 60
IBS with local feeding (power supply) 23 (16) 55 60 60
DECT Terminals 120 120

IP DECT Mobility
IP-DECT sets (DECT 500, 8232, generic GAP) 50
IP-DECT AP 4080 / 8340 Smart 16

VoWLAN
Total number of IP users 120
Simultaneous calls per Access point 8 Simultaneous calls
Note: topologies with SVP Server are no longer supported.

Voice Mail Unit

Number of Voice Mail Ports 8 max
Voice Mail Storage (on PowerCPU with SDCard) Up to 30 hrs *
Voice Mail Storage (PowerCPE EE & PowerCPU with HD) Up to 200 hrs *
Memory Pool for Voice Mail Names & Announces 8750 sec
Number of Voice Mail Boxes 1 per set
Simultaneous Call Recording 3 max (1)
External notification greetings 120 sec
Name recording 5 sec

Alcatel-Lucent OmniPCX Office - Release 10.3

Limits and Dimensioning for OmniPCX Office R10.3 TC1972 ed.05
Copyright © ALE International 2016 page 9/16
Play/Record resources 32
Personalized Mail box greetings 7500 sec
Email notification of new messages: max size of
10Mb - approximately 20mn recording (2)
attachment
* This duration includes the time of mailbox messages and record on line.
(1) Reminder: the call recording feature shares the DSP with the 3 party conferences.
(2) Call record greater than 10 Mb can be retrieved with PIMphony (Pro/Team).

Preannouncement
Greetings messages min. 64 sec (4 messages)
Greetings messages max. 320 sec (up to 20 messages)

Metering
V24 / IP metering tickets 1 000
NMC metering tickets 30 000
Account Codes 250
Meter Recall 10

Keys
User + System Programmable Keys (UPK + SPK) 16 292
Resources 5 155
Filters 5 338
Supervision 312
Supervision Groupware
50
(including manager-secretary supervision keys)

Repertories
Individual 3 920
Common (included in phone book) 2 200
Phone Book (Common + individual) 5 000
LDAP connector 1
Favorites (OTCV Windows & PIMphony Touch) - PowerCPU EE 50 per user
Favorites (OTCV Windows & PIMphony Touch) - PowerCPU Not available

Groups
Attendant Groups 8
Size of each Group 8
Hunting / Broadcasting / Pick Up Groups 50
Size of each Group 32
Trunk groups 120
Size of each Group 120
Application Interfaces
HTTPS WS event (My IC Web for Office + PIMphony + PowerCPU EE : 200 (max connected)
OTCV) PowerCPU : 150 (max connected)
TAPI 2.0 sessions 25

Alcatel-Lucent OmniPCX Office - Release 10.3

Limits and Dimensioning for OmniPCX Office R10.3 TC1972 ed.05
Copyright © ALE International 2016 page 10/16
TAPI 2.1 server sessions 25
TAPI 2.1 server monitoring 200
CSTA server sessions 25
CSTA server monitoring 200
TAPI 2.1 + CSTA server sessions 200
TAPI 2.1 + CSTA server monitoring 500
CSTA client desktop sessions 25
CSTA client desktop monitoring 25

Collaboration Applications
My IC Web for Office - Power CPU EE 200
My IC Web for Office - Power CPU 150
My IC Social Networks (Outlook plug-in) 200 with TAPI 2.1 / 25 with TAPI 2.0
PIMphony clients - PowerCPU EE 200
PIMphony clients - PowerCPU 200 (http) / 150 (https)
PIMphony Attendant 2
PIMphony Touch (PC & Tablet) - Power CPU EE 200
PIMphony Touch (PC & Tablet) - Power CPU 150

Numbering Plan
Main (internal) 99
DDI (in normal mode) 99
DDI (in restricted mode) 99
Function Codes 35
Private Numbering Plan 36
Modifications of Main Numbering Entries 33
Modifications of DDI Numbering Entries 18
ARS Prefix Entries 500
Main Prefix Entries 100
Day Group Prefix Entries 7
Holiday Group Prefix Entries 20
ARS Bundle List Prefix Entries 120
Splitting Prefix Entries 16
End of Dialing Prefix Entries 20
Installation Number ( Main ) 1
Private installation number 1

Miscellaneous
Simultaneous Conferences * (OXO 3 party conference) 3
6-party conference (meet me) 1
OMC feature right "Conference Bridge Allowed"
3
(OT 4135 and/or SIP phone)
H.323 Gateways ** 20
Immediate forward 200
Mailing (text) 400

Alcatel-Lucent OmniPCX Office - Release 10.3

Limits and Dimensioning for OmniPCX Office R10.3 TC1972 ed.05
Copyright © ALE International 2016 page 11/16
Predefined Text Message 30
Appointment 192
Fax Notification 30
Languages 4
Entity 4
System Music on Hold Up to 4x 10 min.
Customizable Music on Hold 10 min.
Pre-allocated Logical Link (PLL) 32
(*) One conversation record will consume one DSP resource of 3 party conference.
(**) An external gatekeeper must be used to manage more than 20 H.323 gateways.

XML Web services

My Phones Web services users 30
My IP touch XML services 30
My Management 30
My Messaging 30

OmniTouch Call Center Office

Declared agents 32
Active agents 32
Agent groups 8
Agent per Agent group 20
Agent Assistant 32
Supervisor Console 8
Statistics PowerCPU EE Yes (kept for 14 months max.)
Statistics PowerCPU Yes with HD (kept for 14 months max.)
Routing Rules (CLI/DDI) 5000 entries
Queues 1 per ACD group

When only ACD or MLAA is active, each service can use up to 16 play resource ports.
When both ACD and MLAA are active:
- 4 ports minimum must be allocated to MLAA
- 6 ports minimum (including 2 ports for dissuasion) must be allocated to ACD
- Total of ports for ACD + MLAA is limited to 16 (including the 2 resources for ACD dissuasion)

Alcatel-Lucent OmniPCX Office - Release 10.3

Limits and Dimensioning for OmniPCX Office R10.3 TC1972 ed.05
Copyright © ALE International 2016 page 12/16
6 Alcatel OmniPCX Office Power Budget
For each cabinet model the following limits must not to be exceeded (unit = W):

- maximum budget for CE = 30 W

- maximum budget for rack S = 34,33 W
- maximum budget for rack M = 52,81 W
- maximum budget for rack L = 79,62 W
The tables below show the power consumption for boards and terminals. If these limitations are not respected
some extensions or boards will not start (in the history table a message is generated).

CPU Boards Rack S/CE Rack M Rack L

PowerCPU EE 8 7.5 9.1
PowerCPU 7.47 6.95 8.4
PowerMEX 1.6 1.62 1.9

Daughter Boards
HSL 1 & 2 0.30 0.30 0.38
Hard disk 2.17 2.33 2.61
Armada VoIP32 1.53 1.53 1.85
AFU / AFU-1 0.61 0.55 0.64

Trunk Boards
BRA 8 0.90 0.97 1.09
BRA 4 0.53 0.56 0.64
BRA 4-2 0.50 0.50 0.50
BRA 2 0.31 0.33 0.38
BRA 2-2 0.30 0.30 0.30
PRA - T2/T1/DASS 2 0.33 0.33 0.41
PCM R2 0.33 0.33 0.41
MET 0.06 0.06 0.07
CLIDSP 0.41 0.41 0.51
GSCLI 0.09 0.10 0.11
ATA4 1.13 1.42 1.42
ATA2 0.62 0.78 0.78
APA8 1.82 2.19 2.27
APA4 1.14 1.34 1.41
DDI4 / 10.25 9.31
DDI2 / 5.12 4.65

LAN Boards
LANX 8 / LANX8-2 3.64 3.64 4.53
LANX 16 6.88 6.88 8.56
LANX 16-1 / LANX16-2 9.61 9.38 8.12

Alcatel-Lucent OmniPCX Office - Release 10.3

Limits and Dimensioning for OmniPCX Office R10.3 TC1972 ed.05
Copyright © ALE International 2016 page 13/16
 MIX Boards Rack S/CE Rack M Rack L
4 T0 / 8 UA / 4 Z 2.76 2.90 3.00
4 T0 / 4 UA / 8 Z 3.29 3.45 3.45
2 T0 / 4 UA / 4 Z 2.03 2.13 2.16
2 T0 / 8 UA / 4 Z 2.52 2.65 2.74
2 T0 / 4UA / 8 Z 3.05 3.2 3.2
8 UA / 4 Z 2.33 2.39 2.48
4 UA / 8 Z 2.92 2.96 3.01
4 UA / 4 Z 1.82 1.86 1.91
4 AT / 8UA / 4 Z 2.62 2.52 2.45
4 AT / 4 UA / 8 Z 3.57 3.48 3.35
4 AT / 4 UA / 4 Z 2.56 2.49 2.43

Extension Boards Rack S/CE Rack M Rack L

UAI 16 2.10 2.21 2.39
UAI 16-1 1.77 1.73 1.66
UAI 8 1.27 1.32 1.38
UAI 4 0.85 0.87 0.88
SLI 16 / SLI 16-1 / SLI 16-2 / 5.00 4.76
SLI 8 / SLI 8-1 / SLI 8-2 2.39 2.51 2.39
SLI 4 / SLI 4-1 / SLI 4-2 1.20 1.26 1.21

Terminals Rack S/CE Rack M Rack L

UA or x9 series 0.46 0.45 0.39
Add On Module or AOM-E 0.25 0.24 0.21
Multi Reflexes UA 0.62 0.64 0.52
CTI Option 0.94 0.92 0.79
AP Option 0.94 0.92 0.79
V24 Option 0.94 0.92 0.79
S0 Option 1.26 1.23 1.07
IBS (Remote feeding) 2.98 2.90 2.52
Z (Analogue Terminal) 0.22 0.21 0.19

Additional notes:
1 When you use an option having CTI you have to add the CTI value; e.g. for an L rack:
- 4093 (V24+CTI) = 0.79+0.79 = 1.58 W
- 4094 (S0+CTI) = 1.07 + 0.79 = 1.86 W

2 When you use SLI analog extension boards or MIX boards, you have to add the number of analog sets
even if they are not connected; e.g. for a L rack:
- SLI16 = 4.64 + (16 * 0.21) = 8 W
- MIX 484 = 2.99 + (4 * 0.21) = 3.83 W

Alcatel-Lucent OmniPCX Office - Release 10.3

Limits and Dimensioning for OmniPCX Office R10.3 TC1972 ed.05
Copyright © ALE International 2016 page 14/16
3 For an UAI16-1 board, it is possible to connect on its first port (in parallel with the UA set) a « power
splitter » option to feed every terminal and base station connected on this board. Those terminals will then
not be taken from the power budget; for example on an L rack:
- One UAI16-1 with 10 UA sets and 3 IBS without « power splitter » = 13.12 W
o 1.66 + (10 * 0.39) + (3 * 2.52) = 13.12 W
- One UAI16-1 with 10 UA sets and 3 IBS with « power splitter » = 1.66W
o only the UAI16-1 board is taken into account.

4 Warning: cabinet power supply values given in the noteworthy do not take into account any DECT IBS. The
consumption of any IBS that is not locally powered must be added manually.

5 The system power consumption can be read with the following noteworthy address:
- PowBudMain: Main cabinet value
- PowBudMex1: 1st extension cabinet
- PowBudMex2: 2nd extension cabinet

Alcatel-Lucent OmniPCX Office - Release 10.3

Limits and Dimensioning for OmniPCX Office R10.3 TC1972 ed.05
Copyright © ALE International 2016 page 15/16
Follow us on Facebook and Twitter
Stay tuned on our Facebook and Twitter channels where we inform you about:
 New software releases
 New technical communications
 AAPP InterWorking Reports
 Newsletter
 Etc.

twitter.com/ALUE_Care

facebook.com/ALECustomerCare

Submitting a Service Request

Please connect to our eService Request application.

Before submitting a Service Request, make sure that:

 In case a Third-Party application is involved, that application has been certified via the AAPP
 You have read through the Release Notes which lists new features available, system requirements,
restrictions etc. available in the Technical Documentation Library
 You have read through the Troubleshooting Guides and Technical Bulletins relative to this subject
available in the Technical Documentation Library
 You have read through the self-service information on commonly asked support questions, known
issues and workarounds available in the Technical Knowledge Center

- END OF DOCUMENT -

Alcatel-Lucent OmniPCX Office - Release 10.3

Limits and Dimensioning for OmniPCX Office R10.3 TC1972 ed.05
Copyright © ALE International 2016 page 16/16