ANTS MACHINE EQUIPMENT

EDM Drill Machine

Model：CNC3040

Supplier : Shanghai ANTS Machine Equipment Co.,LTD

WEB: www.antsmachine.com Tel/Whatsapp:+86-15803802793 Email: [email protected] 1

 ANTS MACHINE EQUIPMENT

Contents

Item Contents Description

1 Technical Parameter

2 Product reference picture

3 Technical performance description

4 Main parts

5 Quality Assurance & After-sales Service

6 Packing & Shipping Terms

7 Company Introduction

8 Quotation & Transaction Terms.

WEB: www.antsmachine.com Tel/Whatsapp:+86-15803802793 Email: [email protected] 2

 ANTS MACHINE EQUIPMENT

Technical proposal
Part 1: Technical parameter
Specification and model CNC3040
X/Y Workbench Dimensions 380 /500 mm
X/Y/Z axis machining stroke 350/450/450 mm
Machine dimensions 1250/1400/2100 mm
Spindle servo stroke 360 mm
Maximum load 300 kg
Clamping electrode diameter φ0.15-φ3.0 mm
Maximum processing current 30 A
Working voltage 110 V
Power supply working voltage (380V AC ±5% 50Hz)
Pulse width Adjustable 0-9 gears (us)
Continuous adjustable pulse interval 1: 1-1:8 (pulse width: between pulses)
Machine power 3.6 (KVA)
Maximum perforation speed 30-60 mm/min (depending on material)
Maximum perforation thickness 400 mm
Positioning accuracy ≤±0.02 mm (100mm)
Minimum movement equivalent of 0.001 mm
Working fluid Purified water
Working fluid filtration method Shallow gap type
Working fluid tank capacity 25 L
Machine weight 500 kg
Three axis control form Numerical control
Three axis drive form Subdivision hybrid motor
XYZ three-axis screw rod Precision ball screw
XYZ three-axis guide rail Linear guide rail
Lubrication of screw guide rail Centralized fuel supply
Control system Shanghai Jiaotong University
Handheld unit Manual control box
Operational control 17 inch LCD touch screen and mouse keyboard
Digital display 3 axis digital display
Power supply method Spindle carbon brush power supply

WEB: www.antsmachine.com Tel/Whatsapp:+86-15803802793 Email: [email protected] 3

 ANTS MACHINE EQUIPMENT

Part 2 : Product reference picture

WEB: www.antsmachine.com Tel/Whatsapp:+86-15803802793 Email: [email protected] 4

 ANTS MACHINE EQUIPMENT

Part 3:Technical performance description

◆Processing principle
Using electrode tubes (brass tubes, purple copper tubes) as processing electrodes, utilizing the
principle of electric discharge erosion, a high-frequency pulse power supply is applied between the
electrode (hollow copper tube) and the workpiece to form a small pulse width and high peak
current discharge machining, supplemented by a high-pressure water pump for cooling and slag
removal, greatly accelerating the erosion speed of the workpiece.

◆Applicable scope
1. Suitable for machining deep small holes with diameters ranging from 0.15mm-3mm on various
conductive materials such as stainless steel, quenched steel, copper, aluminum, and hard alloys. It
can directly penetrate and process irregular shaped surfaces such as slopes and surfaces.
2. It is mainly used for the processing of small holes on the mold, as well as the threading holes, the
spinneret holes of the chemical fiber spinneret and spinneret, the group holes of the filter plate
and sieve plate, the cooling holes of the discharge motor blade and the cylinder body, the oil and
gas path holes of the hydraulic pneumatic valve body, etc; It can also be used to remove drill bits
and taps that are broken in the workpiece without damaging the original hole or thread.
3. Use purified water or tap water as the processing coolant.

◆Features and functions

1. The machining hole information input by the user is saved in the system's storage medium in the
form of a file for multiple users to avoid frequent input after turning off the power. And it can save
multiple machining hole information, and can edit and save the original machining again.
2. In the unprocessed state, the machining trajectory line can be displayed in the hole position
schematic area to simulate the machining sequence.
3. During the multi hole machining process, it is possible to forcibly exit the current hole machining
and proceed to the next hole for machining.
4. During the machining process, if you need to replace the electrode, simply click the（Replace
Electrode）button. The Z-axis of the system will automatically rise to a certain position. After
manually replacing the electrode, click this button again to restore the machining status, which is
convenient and efficient.
5. For machining multiple holes, the CNC system can add hole information in two ways: (1) Add
hole information one by one, suitable for adding scattered and irregularly distributed holes. (2).
Formula adding hole information is suitable for hole information with certain distribution rules.
The hole information can be changed, added, or deleted at any time according to the machining
needs, and the machining order of the holes can be adjusted.
6. Bed structure: Box shaped design and meticulous rib support, with HT200 casting for drag plates
and columns. The bed is thick, rigid, and unchanging in shape.
7. Linear guide rail: Taiwan linear guide rail, designed with full stroke support, precise and durable
maintenance.
8. Precision ball screw: X/Y/Z three-axis configuration with Taiwan Dinghan precision ball screw.

WEB: www.antsmachine.com Tel/Whatsapp:+86-15803802793 Email: [email protected] 5

 ANTS MACHINE EQUIPMENT

9. X and Y motors: driven by stepper subdivision motors, further improving the machining accuracy
of the machine tool. Advanced undamped protection, no need for reverse clearance compensation;
Prevent the machine tool from crawling.
10. Z-axis motor: Adopting AC deceleration motor, with fast lifting speed and high sensitivity.
11. Convenient Workbench: Mobile double strip workbench support fixture, which is conducive to
workpiece clamping and reduces power consumption.
12. Three axis CNC system of Shanghai Jiaotong University: the CNC system adopts encoder/player
architecture, and the CNC encoder realizes the management of engineering documents such as
CNC process database files and CAD. G codes.
13. Rotating head: National patented rotating head, using hard alloy end face sealing technology to
ensure long-term water leakage.
14. Workbench : Made of grade 0 high-precision marble.
15. Lubrication system: Convenient oil lubrication method, safe and reliable, maintaining sufficient
lubrication for mechanical movement, better maintaining machine accuracy and extending
machine service life.
16. circuit system: modular design, machine tool electrical appliances, high-frequency power
supply, CNC system, scientific integration. The overall structure of the machine is compact and
reasonable in layout, with strong anti-interference ability, good reliability, environmental
protection, energy conservation, and compliance with ergonomic standards, emphasizing
user-friendly standards.
17. pulse power supply: High performance, high-power, effectively achieving high efficiency and
micro hole processing, and can efficiently process various types of mold steel, aluminum, copper,
aluminum alloy, titanium alloy, hard alloy, conductive ceramic, and superconducting hot material.
18. Electric control testing: All components of the system control board are strictly aged and
screened. Full load of 40 ℃ for 100 consecutive hours; Impact load 50 ℃, intermittent for 100
hours.
19. Control host: (1) Sufficient hardware configuration inside the industrial control computer: it can
be effectively implemented, and programming and control can be completed in a time-sharing
manner; Real time tracking and display of machining trajectory. (2) The host has stable
performance and can work continuously for 365 days without interruption. And it is equipped with
RS232 interface, USB interface, network card interface, keyboard and mouse.
20. Display screen: anti-interference 21 inch touch screen. Industrial dedicated imported touch
screen with high resolution, anti electromagnetic interference, clear tracking and display of
processing trajectory during processing, completely solving the problem of blurred screen, shaking
screen, and black screen.
21. The rotating head of the motor adopts tungsten steel wear-resistant plates and multiple
waterproof structures to ensure the concentricity of the chuck rotation.
22. The maximum stroke of the Z-axis is 400mm, which can clamp a 500mm long electrode at once,
and the waste of the electrode tube is relatively low.
23. The maximum processing depth to diameter ratio is 300:1
24. The maximum perforation speed is 30-60mm/rpm

WEB: www.antsmachine.com Tel/Whatsapp:+86-15803802793 Email: [email protected] 6

 ANTS MACHINE EQUIPMENT

25. Replacing traditional analog high-frequency with digital high-frequency, more accurate; PWM
special pulse sending port, canceling the Dip switch, more stable; High frequency soft start function,
with no burrs on the machined surface.
26. Equipped with depth determination function: using encoding disc counting, orthogonal
decoding of phase A and phase B, strong anti-interference ability, and more accurate depth
determination.
27. Equipped with one click machining function: drilling requires only one click.
28. Equipped with intelligent tool lifting function: set the thickness of the workpiece, puncture the
workpiece, and automatically lift it to the surface of the workpiece after one click processing.
29. Limit function: When reaching the lower limit, it will automatically rise to the top. If you want
to change the copper tube midway, just press the change copper tube function, and you can also
directly rise to the top.

Part 4 : Main Parts

 Main Parts
No. Item Origin or brand of supporting parts
1 Bed casting Hebei HT250
2 Workbench linear guide rail Taiwan SHAC
3 Workbench ball screw Taiwan SHAC
4 Column ball screw Taiwan SHAC
5 Column linear guide rail Taiwan SHAC
6 Workbench ball screw bearing Japan NSK
7 Column ball screw bearing Japan NSK
8 Workbench AC servo drive motor HCFA
9 Z-axis lifting DC servo motor Sanyo, Japan
10 National Patent Rotating Head Taiwan hard alloy tungsten steel material
11 Three axis CNC system Shanghai Jiao Tong University

Part 5: Quality Assurance & After-sales Service

 Technical Standards
The national standard (GB/T8771.2-1998) and the content of the technical agreement inspect the
geometric and positional accuracy of the equipment and process the standard test pieces to
inspect the accuracy of the processed products：
Test items Tolerance

1. The flatness of the workbench surface mm 0.03

WEB: www.antsmachine.com Tel/Whatsapp:+86-15803802793 Email: [email protected] 7

 ANTS MACHINE EQUIPMENT

2. The straightness of the table movement in the

X axis: 0.020 Y axis: 0.028
vertical plane mm
3. The straightness of the table movement in the
X axis: ：0.028 Y axis: 0.025
horizontal plane mm
4. The parallelism of the worktable movement to the
X axis: 0.045 Y axis: 0.04
worktable surface mm
5. The verticality of the Y-direction movement of the
0.03/300
worktable to the X-direction movement mm
7. The verticality of the Z-axis up and down
0.040/400
movement to the worktable surface mm
8. Parallelism of the guide installation hole to the up
X、Y direction 0.02/100
and down movement of the W axis mm
Note: X-axis, Y-axis positioning accuracy and repeat positioning accuracy are tested according to
GB/T17421.2-2000 testing method

Warranty service:
one year warranty( 12 months since customer receive & use the machine).
The manufacturer guarantees to provide life-long paid maintenance services for the product.

Part 6: Packing & Shipping Terms

1. Packing list
Packing list 1 copy
Factory qualified certificate 1 copy
Operation manual 1 copy
2. Packaging and transportation
Exporting standard wood box packing
The transportation is carried out in accordance with the contract terms.

Part 7: Company Introduction

Shanghai ANTS Machine Company is mainly engaged in CNC Series Die Sinker EDM Machine,DK77
series EDM wire cutting machine, D71 series EDM machine, XK series CNC milling machine,
VMC&HLC series machining center, Sawing machine, Grinding machine, Drilling machine, Lathe,
and other equipment. The products are sold to Hebei, Shaanxi, Hunan, Henan, Jiangsu, Shandong,
Guangdong, Shanghai and other places. More than 300 professional after-sales service personnel
in 83 offices across the country provide customers with pr-sales and after-sales services at any time.
The products are deeply trusted by customers and are exported to more than 20 countries and

WEB: www.antsmachine.com Tel/Whatsapp:+86-15803802793 Email: [email protected] 8

 ANTS MACHINE EQUIPMENT

regions such as the United States, Germany, Italy, India, Thailand, and Russia. Especially in recent
years, they have been widely used in major domestic well-known enterprises such as China
National Heavy Duty Truck, Ministry of Aeronautics and Space, Zhongyuan Special Steel, Zhengmei
Machinery, Shanghai Heavy Industry, Wuhan Iron and Steel, Anshan Iron and Steel and Sany Heavy
Industry have the characteristics of rich experience, excellent.
Factory Pictures

ISO 14001 Environment ISO 9001 Quality European CE

Management System Management System Certificate

WEB: www.antsmachine.com Tel/Whatsapp:+86-15803802793 Email: [email protected] 9

 ANTS MACHINE EQUIPMENT

Part 8 : Quotation & Transaction Terms

QUOTATION SHEET
CURRENCY UNIT：USD
HS code: 8456301090 Date:Nov 6th, 2023
Price In USD
Machine Type Equipment Model Main Parameter
(EXW SHANGHAI)

X/Y/Z axis travel：

EDM Drill Machine CNC3040 9300 USD/Set
350/450/450 mm

* The sea freight cost fluctuate everyday due to the global shipping situation, The final confirmed
price can be checked when the machine is about to ship.

Remarks：
1. Origin: The People’s Republic of China
2. Delivery Time: 10 days ready for the factory acceptance test.
3. Payment terms: 30% payment in advance for deposit,70% balance after the pre-acceptance test
before shipment
4. Package: Exporting standard Wooden Box Package
5.Validity: 30 Days.(The buyer hsas to re-check with seller if the quotation validity is expired)

WEB: www.antsmachine.com Tel/Whatsapp:+86-15803802793 Email: [email protected] 10