lum6
lum6
Date ________________________
IS18 Type ________________________
Ordering Information:
__ __ _ __ M
_ V
_ _ _ _ _ ___
Internal Fixture Type Optical
Voltage Code mounting controller Light Bar Finish OPTIONs
code (nominal)
I = Indirect 18 = 1’ x 8’ Stand Alone 0 = 120-277V M = Suspension Kits, V = 0-10V WHTE = White Blank if no options
S = Suspended C8* = 1’ x 8’ Continous (ul version) See Accessories D = Dali* A = Additional branch circuit
S8 = 1’ x 8’ Starter D = 347V table below EL = Emergency Light
* If choosing not to order S = Single Pack
starter fixture, starter kit *Only available WP = White Painted
must be ordered (see below). for optical code:
A,B,E,F,J and K.
Optical Distribution/ CCT Lumens power
Code configuration
Maximum Run Length: A2 Medium,Medium Efficacy 3500 8000 66
A3 Medium,Medium Efficacy 4000 8400 66
Lumen Code B2 Medium,Medium Efficacy 3500 9900 84
Supply Voltage B3 Medium,Medium Efficacy 4000 10400 84
A or E B or F E2 Medium,7% Uplight 3500 8000 66
120V 192’ 160’ E3 Medium,7% Uplight 4000 8400 66
F2 Medium,7% Uplight 3500 9900 84
277V or 347V 400’ 320’ F3 Medium,7% Uplight 4000 10400 84
Accessories Product code
Suspended Kits - Option 1 93035285
Set of 10’
mounting cables
Upper Mounting
Kit (x2)
Set of 10’ Power feed
mounting cables cable (6.75 FT)
Product Specifications:
Construction:
• Fully recyclable heatsink 1
• IP Rating: IP20
• Impact Resistance: IK=2
Electrical System: Installation:
• Class 1, replaceable, high efficiency LED driver rated for 50,000 hours when used • When ordering Lumination IS Series LED Luminaires 2 mounting brackets
within operating conditions. are included with each fixture.
• Audible Noise – Per 29CFR 1910 sub part G: <24 dba (1 foot) • Additional mounting brackets can be ordered if needed, depending upon
• THD: <20% mounting and spacing of application.
• Transient Protection: 100 kHz ring wave, 2.5 kV level For more information and access to all of our resources, including our
• Environmental Testing: High Temperature High Humidity: 60°C / 90% (non-condensing) design tool visit: www.gelighting.com
• Electronic Vibration Testing: Multi Axis, Random Vibration Profile: 2-2000 Hz, 5Gs on electronics
• Compliant with the material restriction requirements of RoHS
All trademarks are the property of their respective owners. Information provided is subject to
change without notice. All values are design or typical values when measured under laboratory
conditions. Current, powered by GE is a business of the General Electric Company.
© 2017 GE.