Scribd
Upload
2 views

Tech Assignment

The document outlines a technology project where team members compare designs to strengthen a structure, including creating sketches and notes. It emphasizes the importance of mechanisms for converting movement and provides safety warnings regarding electrical components. Additionally, it details the assessment criteria for the project, including accuracy in drawings and functionality of the model.

Uploaded by

Nadia Omar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF or read online on Scribd
2 views

Tech Assignment

The document outlines a technology project where team members compare designs to strengthen a structure, including creating sketches and notes. It emphasizes the importance of mechanisms for converting movement and provides safety warnings regarding electrical components. Additionally, it details the assessment criteria for the project, including accuracy in drawings and functionality of the model.

Uploaded by

Nadia Omar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 7
2128728, 10:24 PM 68 Technology * Compare the rough designs of everyone in your team. Then decide together on what design you will use to strengthen the structure. Make a neat sketch of this design in the space below. Add notes and labels to the sketch to explain the design. (4) le:Tech_English_LG_Grade8-term1-web-resources/image/Tech_English_Gr8_term1_pg93_img1.png Figure 5 Figure 6: Different mechanisms that you can choose from to change rotational movement into reciprocating movement What mechanism did you choose, and why? ‘The p hoto below shows what the model will look like before you make your changes. [esech_English_LG_Grade8-term1-web-resources/image/Tech_English_Gr8_term1_pg94_img1.png Figure 7 corrugations are in the correct direction, as shown by the arrows on the drawings, worn mstworkbooks.co.zahechnologyigr8igr8technology-07.himl ang 210874, 10.24 PM G18 Technology Corrugations are like tunnels between the two outer layers of the cardboard. Corrugated cardboard is stronger in the one direction than in the other. Figure 8: The parts of one of the two A-frames with its support for the axle. worn mstworkbooks.co.zahechnologyigr8igr8technology-07.himl ong 2ipsre4, 10:28 PM G18 Technology Figure 9: The parts of the lever, and the follower for the cam that will be attached to it Figure 10: Three different shapes of cams to choose from worn mstworkbooks.co.zahechnologyigr8igr8technology-07.himl r0n9 2ipsre4, 10:24 PM G18 Technology Figure 11: Spacers to use on axles How to attach the parts of your model Other materials that you will need Safety warning Do not remove any copper wire from electrical wiring. if you do this, you can be shocked to death, and other people won't be able to use electricity before the wires are fixed. You can also go to jail for stealing electrical wire. Unwanted sideways movernent on an axle follower LT Figure 13 Mark allocation + You followed the plans and instructions successfully. (4) + You made a mechanism to change the rotational movement of thehandle into the reciprocating movement of the pestle.(3) ‘+ The parts that turn on axles cannot move sideways. (2) + Your model works well. (3) worn mstworkbooks.co.zahechnologyigr8igr8technology-07.himl a9 210874, 1024 PM 648 Technology 8 Step 3 Step 4 step5 Step 6 step 7 step 9 Step 11 worn mstworkbooks.co.zahechnologyigr8igr8technology-07.himl rane 2s, 10.24 618 Tecnology step 12) er Figure 12: Different steps of building the model individual work Make a working drawing in 2D of what you will add to the structure so that it cannot collapse or topple over. ‘+ The drawing accurately shows the design you that sketched on page 92. (2) ‘© The drawing shows all important dimensions. (2) ‘©The drawing is to scale, and the scale is shown. (1) ‘+ The drawing shows all hidden lines. (1) worn mstworkbooks.co.zahechnologyigr8igr8technology-07.himl 1319 2ipsre4, 10:24 PM G18 Technology Make a 3D isometric drawing of what you will add to the structure Use a ruler. ‘+ The drawing accurately shows the design you that sketched on page 92. (2) ‘+ The drawing shows the dimensions in the correct way. (3) ‘© The drawing is to scale, and the scale is shown. (1), worn mstworkbooks.co.zahechnologyigr8igr8technology-07.himl sane

You might also like