Series

ISL-1219-10 Rev.0

Printed in Korea

The functions and design of this product can be changed without prior notice for quality improvement.

INTRO
Thank you for choosing a GATEMAN product.

CONTENTS
Getting Started

We welcome you to this new door solution world of GATEMAN that is the leading brand in
the world digital door lock industry.
Please find comfort and security in yourself through perfectly combined digital and analog

Directions

Safety Cautions

Product Features

Simplified Directions

Directions

Components OverviewIdentification

technologies presented by GATEMAN.

How to Use
This user manual enables you to operate the product more convenient and safer.

Password

10

Fingerprint Guide

Be sure to read this completely before using it.

Normal Mode: Use Fingerprint

Security Mode: Use Fingerprint
Remove Fingerprint
Lock Door
Open Door from Inside

Settings

16

Safe Handle FeatureVolume Setting Feature

Auto / Manual FeatureChange to Fingerprint Mode
Voice / Melody Feature
Forced Lock

Safety Feature

21

Alarm Feature
3-minute Lock FeatureOpen Door with fake password

Extra Features
Option

24

Remote Control Module

Remote Control

Emergency Power

26

Emergency Power Supply for

Discharged Batteries

Product Specification

27

Must Read This!!!

Product Features

Please read this carefully for your own safety.

1 One-touch Fingerprint Verification Method (Easy Scan)

Do not install the unit in outdoor
environment.

Be careful not to let

unauthorized user know
your Password.

Infant and some users who have

unusual fingerprints (those which
are difficult to register) may not
be registered for fingerprint
verification.

Easy Scan technology has been applied to conveniently read a fingerprint in one
shot without the need to open or close the cover to enter a fingerprint.

Getting Started

Safety Cautions

2 SHM(Safe Handle Mechanism) Technology

Scan-type fingerprint modules do
not recognize fingerprints with
water or foreign materials and set
off alarm sounds.

SHM(Safe Handle Mechanism) Technology that makes it impossible to open the Doorlock to
trespass a house by drilling a hole on the entrance or through a pet door has been applied.

3 Palm Touch Feature

Do not use force with a tool onto
the product.

Please keep your password

safely.

Make sure to lock the door

tight when you go out.

To prevent the password from being exposed due to residual fingerprints after opening a door,
a new technology has been adopted to complete the door opening process by touching the
keypad with a palm after entering the password.

4 Smart Pad Feature

A separate lighting method where each keypad number has been separately designed is
applied so that users may examine intuitively how the selected function is operated and
if they are run normally.

5 Voice Guide Feature

Be careful not to hit the handle
as it may cause injuries.

Keep foreign materials away from

the fingerprint sensor to maintain
it cleanly and do not use it with
wet fingers.

Do not spray water directly to the

product or wipe it with chemical
substances such as benzene,
thinner, or alcohol when cleaning
the product.

As the voice guide is offered that lets you know the operation status and how to set
each feature and mode for easier and more convenient use.

6 Remote Control (Option)

You may use a remote control by installing the Remote control Module.

Caution
4

Make sure to follow the above instructions to avoid any injuries or damages on the properties .

Simplified Directions
1 Register Password

Press
button

Enter number
1 button

(Registration)

Enter password
(4 to 12 digits)

Press
button

(Registration)

2 Register Fingerprints

Press
button

(Registration)

Enter number
2 button

3 Lock Door from Outside

If you close a door in Auto Lock status,
it will be closed within 5 seconds by the
automatic lock sensor.
In Manual Lock status, touch the keypad
in the front body (Front Body) gently with
your palm to lock a door.

Enter password
(4 to 12 digits)
Press button

Sweep your Press

finger(fingerprint) button
through the
fingerprint sensor
3 times to register

(Registration)

Directions
Directions

Components OverviewIdentification

How to Use

4 Open Door from Outside

Password

Put a registered card key on the reader

Fingerprint Guide

Touch the keypad in the front body

gently with your palm to press the registered
password. And then, press the keypad
again gently with your palm or press button
to end.

Normal Mode: Use Fingerprint

10

Security Mode: Use Fingerprint

Remove Fingerprint
Lock Door
Open Door from Inside

5 Lock/Open Door from Inside

Turn the manual open/close
device. The deadbolt will be
thrown or be retracted in turn.
If Auto Lock is set, a door will
automatically be closed once
closed.
Press the Safe Handle button
and lower the handle to open
a door.

Settings

6 Set Auto/ Manual Mode

Be the Auto/Manual Lock Setting
button released in the back body to
set Auto

Auto Set

16

Safe Handle FeatureVolume Setting Feature

Auto / Manual FeatureChange to Fingerprint Mode
Voice / Melody Feature
Forced Lock

Be the Auto/Manual Lock Setting

button pressed in the back body to
set Manual

Manual Set

Safety Feature

21

Alarm Feature
3-minute Lock FeatureOpen Door with fake password

Identification

Basic Contents

Front

(Front Body, install on the outside of the door)

The contents of this product may be subject to change without notice for performance or quality improvement.

Basic Contents

Pull down Emergency Cover

Front (Front Body)

Back (Main Body)

Installation Template

Lock case

Fingerprint Operation Lamp

Keypad (10-Key)

Dead Bolt Jam Lamp

Lever

Fingerprint Cover

Battery Change Lamp

Emergency Power Supply

Terminal

Reset button

Emergency Cover

9V Emergency battery
(Optional)

Back

4 Batteries
Screws

(Back Body, install on the inside of the door)

Battery Cover

Slot for Remote control

module(Option)

Registration button

Strike Plate

Users Guide

Option

Remote control
Remote control module

Directions

Components Overview

Battery Change Lamp

Forced Lock Switch

Manual thumb turn

Lever

1.5V AA Alkaline Batteries

Auto / Manual Lock button

Volume Control Switch

Lock case
Automatic Locking Sensor
Dead Bolt
Latch Bolt
Safe handle button

To Use Password

How to Use

Passwords should be selected from 4 to 12 digits. [*] and [#] are not allowed.

To Register Password
Order
1 Press
button

Play

(Registration)

Fingerprint
Fingerprint Guide

Description
Open the battery cover in the back body and
press (Registration) button once.

Directions

How to Use

To change modes: Please refer to page 19.

Normal Mode : It enables you to make separate registration, and open a door through the registered
fingerprint or password.
Security Mode : It enables you to make separate registration and deletion, and open a door only when
the fingerprint number and the fingerprint match.

Repeated Operations
2 Enter the password

Enter the password you wish to register. (4 to 12 digits)

3 Press
button

Press the (Registration) button in the back body again to

complete the password registration.

(Registration)

Play

Description

1 Touch with palm

Touch the keypad of the front body gently with your palm.

2 Enter password

Enter the registered password in the keypad.

3 Touch with palm

Touch the keypad of the front body gently with

your palm or press [*] button to end.

Note
Make sure to leave the door open when registering a password because you may accidentally lock
a door while trying to register or change a password the first time.
The previously registered password will automatically be deleted when the new password is registered.
When registering a password, the registered password will be displayed on the keypad
(Smart Pad) in sequential order and, then, be disappeared.

10

Press and lift up the Guide

Bar on the fingerprint cover.

To Open Door with Password

Order

You will see the fingerprint cover

being raised and start to open.

When the fingerprint cover is

completely open, the lamp will
be on.

Start sweeping your fingerprint

through the sensor.

Complete your fingerprint

registration.

Note
You may register up to 20 fingerprints. (The same applies to Normal/Security Mode)
Note that you may not register 20 fingerprints depending on the state of the previously registered fingerprints.
Scan-type fingerprint modules do not recognize fingerprints with water or foreign materials and
set off alarm sounds.
Make sure to register a password just in case you fail to register a fingerprint.
Make sure to leave the door open when registering a password because you may accidentally lock
a door while trying to register or change a password the first time.
If an error occurs during registration, the process reverts back the beginning (entering fingerprint).
If no more input is made for 20 seconds after registering at least 1 fingerprint, the registration will be complete.
Duplicate fingerprints may be registered. Same fingerprints can be registered repeatedly.

11

How to Use

Normal Mode: Use Fingerprint

Security Mode: Use Fingerprint

It enables you to make separate registration, and open a door through the registered fingerprint or password.

It enables you to make separate registration and deletion, and open a door only when the fingerprint number and the fingerprint match

To Register Fingerprint

To Register Fingerprint

Order
1 Press
button

Play

Description

(Registration)

Order

Description

Open the battery cover in the back body and

press (Registration) button once.

1 Press
button

2 Press number 2 button

Enter the password
Enter button

Press the number 2 button according to the voice guide.

Press the password and then the [#] button on the keypad.

2 Press number 2 button

Enter the password
Enter button

Press the number 2 button according to the voice guide.

Press the password and then the [#] button on the keypad.

3 Register fingerprint
- 3 times

After the operation lamp is on, sweep your fingerprint

3 times through the fingerprint sensor according to
the voice guide.

3 Press fingerprint
number

Enter 4-digit fingerprint number to register.

4 Register fingerprint
- 3 times

After the operation lamp is on, sweep your fingerprint 3 times

through the fingerprint sensor according to the voice guide

4 Press
button

Press the (Registration) button in the back body again to

complete the fingerprint registration.

(Registration)

( Press [#] button to continue the fingerprint registration process.)

5 Press
button

To Open Door with Fingerprint

Order

Play

Open the battery cover in the back body and

press (Registration) button once.

(Registration)

Press the (Registration) button in the back body again to

complete the fingerprint registration.

(Registration)

( Press [#] button to continue the fingerprint registration process.)

To Open Door with Fingerprint

Description

Order

Play

Description

1 Lift the fingerprint

cover open

Lift open the fingerprint cover and wait for the operation
lamp to light on.

1 Touch with palm

Touch the keypad of the front body gently

with your palm.

2 Enter fingerprint

Sweep the registered fingerprint through the fingerprint

sensor in the front body.

2 Press fingerprint
number

Enter the registered fingerprint number in the keypad.

Make sure to examine if the door opens normally with the

registered password or fingerprint after the registration is
complete.

3 Enter fingerprint

Sweep the registered fingerprint through the

exterior fingerprint sensor.

Check if the door opens!

12

Play

Directions

How to Use

13

How to Use

Remove Fingerprint

Lock Door

You may only delete each fingerprint separately in the Security Mode.

To Delete All Fingerprints

Order
1 Press
button

Play

To Close Door from Outside

Description

Order

Open the battery cover in the back body and

press (Registration) button once.

Auto Lock status

2 Press number 3 button

Enter the password

Press the number 3 according to the voice guide and then,

the password on the keypad.

Manual Lock status

3 Press
button

Press the (Registration) button in the back body again

to delete all fingerprints.

(Registration)

(Registration)

Directions

How to Use

Play
5 Sec

Description
The built-in Auto Lock sensor automatically locks
a door within 5 seconds after the door was closed.

Touch the keypad in the front body gently with your

palm to lock a door.

To Close Door from Inside

Order

To Delete Each Fingerprint

Order
1 Press
button

14

(Registration)

Play

(Security mode only)

Description
Open the battery cover in the back body and
press (Registration) button once.

2 Press number 4 button

Enter the password
Enter the

Press the number 4 according to the voice guide and then,

the password and [#] on the keypad.

3 Registered fingerprint
number

Enter the fingerprint number to delete on the

keypad.

4 Press
button

Press the (Registration) button in the back

body again to delete a single fingerprint.

(Registration)

Auto Lock status

Manual Lock status

Play
5 Sec

Description
The built-in Auto Lock sensor automatically locks
a door within 5 seconds after the door was closed.

Turn the Manual Open/Close Device to Close side to

lock a door.

Note
Even after a door was locked by the Auto Lock function,
please check again if the door was completely closed and locked.

15

Settings

Open Door from Inside

Safe Handle Feature

The default setting is Safe Handle Setting.

The technology to prevent a forced attempt to drill a hole in the door and unlock the Doorlock has been applied.

To Open Door from Safe Handle Setting

To Release Safe Handle Setting

Keep pressing the Safe Handle

button. And then, lower and push
the handle at the same time. The
Safe Handle button is found on the
interior handle.

1 Open the battery cover and

take out a hex wrench.

(Closed)

(Open)

2 Keep pressing the Safe Handle button.

Turn the set bolt found in next to
the handle to clockwise.

To Open Door from Safe Handle Setting Locked

To Set Safe Handle

Lower and push the interior

handle at the same time.

1 Open the battery cover and

take out a hex wrench.

(Closed)

(Open)

Directions

Settings

2 Turn the set bolt found in next to the

handle to Counter clockwise until the
Safe Handle button comes out.

To Open with Manual Device for Emergencies

Volume Setting Feature

Turn the Manual thumb turn to Open
side. Keep pressing the Safe Handle
button. And then, lower and push the
handle at the same time. The Safe
Handle button is found on the interior
handle.

It enables you adjust the volume of various sounds from the product.

Volume Setting
Order
(Closed)

(Open)

To set volume switch

Note
Make sure to fully familiarize yourself with the operations for the Manual Device and
the Safe Handle in preparation for emergencies.

16

Play

Description
The operation sound loudness is adjusted according to
the Volume Switch Setting.
(2 : Louder / 1: Lower / 0 : Mute )

Note
Be careful that the set bolt wont detach when modifying the Safe Handle Setting.
Even when the operation sound is set asMute,the error and alarm sounds will go off.

17

Settings

Auto / Manual Feature

Change to Fingerprint Mode

Auto Lock setting locks a door within 5 seconds after the door is closed.

The default setting is Normal Mode.

To Set Auto/Manual Feature

Fingerprint Mode Setting

Order

Play

Order

Description

Auto Lock Setting

Be the back body Auto/Manual Setting button

released to set Auto

Manual Lock Setting

Be the back body Auto/Manual Setting

button pressed to set Auto

1 Press
(Registration)
button and button

Play

Directions

Settings

Description
Open the battery cover in the back body.
Press (Registration) button and then, [#] button.

Security Mode Setting

Press number 1 and 1 button
Enter the password

Press the number 1 and then, 1 again on the keypad.

Enter the registered password.

Normal Mode Setting

Press number 1 and 3 button
Enter the password

2 Press
button

Voice / Melody Feature

(Registration)

Press the number 1 and then, 3 again on the keypad.

Enter the registered password.

Press (Registration) button again to set

Security Mode or Normal Mode.

You may select the operation sound that is set off when the door is open and closed.

To Set Voice/Melody Feature

Order

Description

1 Press
(Registration)
button and button

Open the battery cover in the back body.

Press (Registration) button and then, [#] button.

2 Enter number 2 and

2 on the keypad

Enter the number 2 and then, 2 again on the keypad.

3 Press
button

18

Play

(Registration)

Press (Registration) button again in the back body.

Note
Even after a door was locked by the Auto Lock function, please check again if the door was completely locked.
It is advised to keep a written fingerprint number(4 digits) list just in case for a separate fingerprint deletion at
Security Mode.
If more than 1 fingerprint is registered after the Security Mode is set, you may not open a door with a password.
(If the fingerprint module is out of order use a password.)

19

Safety Feature

Forced Lock

Alarm Feature

Outside Forced Lock Setting - Fingerprint

Order

Play

Description
Enter the registered fingerprint on the fingerprint sensor
when the operation lamp(LED) is on.

1 Enter fingerprint

Press the [#] button for 5 seconds.

(A beeping sound sets off for 3 times.)

2 Press button for

5 seconds

The alarm sound continues for 30 minutes or until it is disarmed.

Break-in / Damage Alarm

Break-in: When someone tries to Break-in by opening
a door when it is locked, the alarm will go off.
Damage: When the front body was damaged
due to forced separation or drilling,
the alarm will go off.
Release Trespass/Damage Alarm

Outside Forced Lock Setting - Password

Order

Play

1 Touch with palm

Enter the registered password on the keypad.

Press the [#] button for 5 seconds.

(The beeping sound sets off for 3 times.)

3 Press

button for
5 seconds

High Temperature Alarm

When there
s fire, it detects the temperature of the inside.
It not only goes off an alarm but also releases the lock
status automatically.
Even when the Inside Forced Lock mode is set,
the High Temperature Alarm releases the lock status
automatically.
Release High Temperature Alarm

Inside Forced Lock Setting

Order
Set / Release Inside
Forced Lock Switch

Play

Method Enter the registered password.

Method Enter the registered fingerprint.
Method Press the interior button for 5 seconds.

Description
Touch the keypad of the front body gently with your palm.

2 Enter password

Directions

Settings

Method Enter the registered password.

Method Enter the registered fingerprint.
Method Press the interior button for 5 seconds.

Description
When the door is closed, move the Inside Forced Lock
Switch to LOCK position so that a red sticker can be seen.

Note
If a door is open when the Auto Lock is not properly operated, the Trespass Alarm might go off.

Note
If you try to open a door with the handle or the Manual Open/Close Device from inside when the Outside Forced Lock is set,
the alarm goes off.
If the Inside Forced Lock is set, any attempt to open a door from outside whether itd be a fingerprint or a password wont work.
When setting the Outside/Inside Forced Lock, enter the number on the keypad (Smart Pad) and
the numbers will flicker from left to right one by one and repeat twice.

20

If the Back Body is exposed to direct sunlight for a long time, the temperature sensor may operate and go off an alarm.
Even when the Inside Forced Lock mode is set, the lock status will automatically be released if the High Temperature
Alarm goes off.
If the alarm goes off due to damage, fire, or trespass, the numbers on the keypad will light up clockwise.
(It repeats the status for 30 minutes with alarm sound.)

21

Safety Feature
3-minute Lock Feature
At 3-minute Lock mode, no button, besides those in the back body, will work.

3-minute Lock Mode Display

If a password or a fingerprint that is yet
to be registered is entered for 5
consecutive times, 3-minute Lock mode
is on and nothing will work for 3 minutes.

2 minute
passes.

1 minute
passes.

To Release 3-minute Lock

Method Press the Back body button.
Method Turn the Back body handle.

3 minute Lock starts.

2 minutes left.

1 minutes left.

The number [3]

lights up.

The number [2]

lights up.

The number [1]

lights up.

Open Door with fake password

Extra Features

It is the most effective feature when you are concerned about your password being accidentally exposed
when you have company or in the similar situations.

Option

To Open Door with fake password

24

Remote Control Module

Order

Play

Description

Remote Control

Emergency Power
1 Touch with a palm

Touch the keypad with your palm gently.

26

Emergency Power Supply for

Discharged Batteries

2 Enter the fake password

and a password

Method Enter the fake password password

Method Enter the password fake password

3 Touch with a palm

Touch the keypad with your palm gently or

press [*] button to end.

Note
3-minute Lock mode wont affect any alarm and is sustained even after the product is rebooted.
Once 3-minute Lock mode is on, the fake PIN code mode wont work until the next normal verification
(fingerprint verification, normal password, open door from inside). In this case, please open a door with your correct password.

22

Product Specification

27

Option

Remote Control Module

Remote Control

Buy the Remote control Module and install it to link the remote control.

Not only FSK method but also the wireless encryption algorithm has been applied.

Extra Features

Option

To Register Remote Control

Order

Remote control Module

Install Remote Control Module

1 Remove batteries

2 Install Remote Control Module

Open the battery cover

in the back body
and remove
all batteries.

Equip the Remote control Module

to the slot.

Play

Description

1 Press
(Registration)
button and button

Open the battery cover in the back body.

Press (Registration) button and then, [#] button.

2 Enter number 0 and

5 on the keypad

Enter the number 0 and then, 5 button on the

keypad.

3 Register fingerprint

4 Press
button

Press the SET button of the remote control

Press the (Registration) button in the back

body again to complete the procedure.

(Registration)

To Release Remote Control

3 Insert batteries

4 Confirm the installation

Insert all the batteries by

checking the [, ]
connector.

If you hear ating-a-ling

sound, the Remote control
Module has been installed
correctly. Close the
battery cover.

Order

Ting-a-ling

Note
The operation status may only be examined through the remote control.

24

Play

Description

1 Press
(Registration)
button and button

Open the battery cover in the back body.

Press (Registration) button and then, [#] button.

2 Enter number 7 and

5 on the keypad

Enter the number 7 and then, 5 again on the keypad.

3 Press
button

Press the (Registration) button in the back body again

to complete the procedure.

(Registration)

Note
The wireless encryption algorithm resorts to the floating ID technology where the wireless
password is changed every time the remote control is operated.

25

Specifications

Emergency Power Supply for Discharged Batteries

Specifications

You may open a door by contacting the 9V battery

To Supply Emergency Power

Order

Parts

Play

Description

1 Contact the
9V battery

Open the emergency cover. Keep contacting the 9V

battery onto the emergency power supply terminal.

2 Touch with a palm

Touch the keypad gently with your parm.

Front (Front Body)

72(W) x 283(H) x 27(D)mm,

Zinc die-casting

Back (Main Body)

78.4(W) x 295.4(H) x 37(D),

Fiber-glass

Lever
Battery

3 Enter password

Press each number of your password.

Lock case
Option

4 Enter

button

Press [*] button.

(Once the motor is fully operated, you may detach the 9V battery.)

Specifications

Remote Control

Extra Features

Emergency Power

Remarks
Operating temperature :
-15~55 (5~131F)

Zinc die-casting
4EA 1.5V AA alkaline batteries
(Operating voltage: 4.5 ~ 6 V)

Last up to 1 year
(10 times used a day)

Steel and SUS304

Wireless

Optional

Battery life may vary depending on temperature, moisture levels,

frequency of use and the quality of the batteries.
Please make sure that all parts are included when purchasing the product.
Optional products may not be available depending on your country or local dealer.

To Replace Battery
1 Expiry Period
The product uses four 1.5V(LR6) alkaline AA batteries.
They may sustain 1 year if used 10 times a day.
(Users are advised to use authentic alkaline batteries.)

2 Low Battery Alarm

You must replace all 4 batteries for the following cases:
* The Low Battery Lamp on the front body lights on
* The Low Battery Lamp on the back body flickers red
* The alarm melody goes off
(a nursery rhyme starting with ting-a-ling melodies)
* The voice guide goes off Please
(
replace batteries.
)

One-on-one real-life size

1.5V(LR6) alkaline AA battery

Low Battery Lamp (red)

front body

back body

Note
The battery duration varies in the temperature, humidity, the number of use, and the quality of the battery.

26

27

28

MEMO

MEMO

MEMO

29

30

MEMO

MEMO

MEMO

31