Slatted Floor
Slatted Floor
FRP Runner, Sow Slats 600 X 800 & 600 X 600, Weaner Slat 600 X 600,
Complementary Slats 200 X 400 & 200 X 600
Cement Slat Size 2.30m L X 0.40m W X 0.09m H
1.1 FRP Runner Fibber Reinforced Plastic, Delta Beam
H 120mm with End Cap 350
meters
Length - 5.00 m X 12 No’s = 60.00m
Length - 8.25 m X 35 No’s = 288.75m
1.2 SOW SLAT 600 x 800 Anti-Slip surface, Greater
Comfort, Better grip for SOWS, Comfortable and
112
nonaggressive, Very hygienic, suitable for Animal No's
Weight 350Kgs. Farrowing, Gestation, Boar,
Finisher and Passages Area – 53.76 Sq. m
1.3 SOW SLAT 600 x 600 Anti-Slip surface, Greater
Comfort, Better grip for SOWS, Comfortable and
82
nonaggressive, Very hygienic, suitable for Animal No’s
Weight 350Kgs. Farrowing, Gestation, Boar,
Finisher and Passages Area – 29.52 Sq. m
1.4 WEANER SLAT - 600 x 600 - Comfort of the 232
No's
Piglets and is safe for their hoofs – 83.52 Sq. m
1.5 COMPLEMENTARY SLAT - 200 x 600 - Comfort of
18 No's
the Piglets and is safe for their hoofs – 2.16 Sq. m
1.6 COMPLEMENTARY SLAT - 200 x 400 - Comfort of
16 No's
the Piglets and is safe for their hoofs – 1.28 Sq. m
1.7 Cement Slat – 2.30m X 0.40m Comfort and Safe for
the Gestation Sows, Floors always maintain Dry and
24 No’s
hygiene – 22.08 Sq. m Actual. 21.76 Sq. m in Flooring
2. Farrowing Crate (Farrowing Room – 8 NOS) Area EACH SIZE 2.4M X 2.0M
2.1 Farrowing Crate
• Sows Friendly & most suitable, Solid Hot Dip
Galvanized Pipes for long life and won’t
Corrosion
• 2.1m L X 0.6m W expendable up to 1.0m H
• Study Front Frame for Side Walls Fixing Door 08 No’s
accommodate for SS Feeder
• accommodate Adjustable Back Door
• Water Pipe Height Adjustable with Stainless Steel
Bite Nipple Drinker
• Anti-Crush Bar on both Sides for Sows
• Easy side Bars adjustable for Lactation depending
on the Piglets Growth
• Stainless Steel J Type Feeder Capacity of 10
Litters Fitted on Front Door. Easy to Clean and
Smooth Surface
• Feeding with FEEDING BALL connected with
110mm X 2mm X 700mm Transparent Pipe
2.2 Farrowing Crate PVC PEN Divider: PVC Divider
Height 0.5m, Thick 35mm, GI Fitting, Back Door, 08 No’s
Side walls connect with Crate (Rooms)
2.3 Mini Hopper Pan - Feeding pan for suckling
Piglets to Per-starter and Starter Feed Capacity 6 08 No’s
Litters, 5 Face Feeding Outlets
2.4 Piglet Drinking Bowl: Plastic make SS Nipple
Drinker Long Center Needle, 1/2" male Thread and 08 No’s
1/2" GI Pile 1m Long with male Thread
2.5 Heating Lamp Protection - Red Plastic cover 1320
X 655 X 511mm Left & Right with IR Lamp100w & 08 No's
Rubber Mate Size 400 X 1200
3.Wall Panels, SS Feeder & SS Nipple Drinker (Nursery Room – 8 Nos)
Area SIZE 3.6M X 3.0M
3.1 Wall Panels: PVC Profiles 35mm Thickness, Height 45 meters
1.0m, Length as per requirements, Gray Color,
includes Hot Dipped 30mm Square Pipe 2 lines above
750mm PVC Profile
3.2 Stainless Steel Feeder – Double Side Feeder 04 No's
1200mm L X 640mm H X 300mm Top X 440mm
Bottom, Weight 38 Kgs, 8 Feeding Faces suitable for
Weaners weight 8 to 30 kgs
3.3 Stainless Steel Nipple Drinking: Small Size 24 No’s
Stainless Steel Nipple Drinker Fitted with
Stainless Steel 45 Degree Elbow & 1/2" X 1m
Height GI Pipe & Fittings each Room 3 No’s
4. Wall Panels, GI Weld Mesh & Plumbing Points (Boundary Wall)
Area covered – 4 Sides
4.1 Wall Panels:
• Ventilated GREEN Color Panels
• Size 1.0 m Height X 50mm Thick
64 meters
• Light Weight, Extremely Durable, Smooth, Non-
Porous Surface, Corrosion Resistant
• Front side Double side opening Door
4.2 GI Weld Mesh
• GI Weld Mesh Fixed above the PP Panels for 4
Feet Height 900 Sq.ft
• Mesh Size 3” X 3”, Wire thickness 3mm
• Frame making with 30mm CP Square Pipe
4.3 Plumbing
• Total Drinking Provisions – Farrowing 20 No’s,
Gestation 12 No’s and Nursery 30 No’s
• Main Line with 1” UPVC Pipes
40 Nos/Point
• Sub Lines in ½” HTPE Pipe
• All the Drinking Nipples are individually
Controlled by ½” UPVC Ball Valve
• Necessary Quality Fittings