Scribd
Upload
19 views2 pages

Cisco Packet Tracer

This document outlines the configuration and analysis of various Application Layer Protocols in Cisco Packet Tracer, including HTTP, DNS, FTP, DHCP, and Email services. It provides step-by-step instructions for setting up each service on the Server0 device, as well as methods for testing and analyzing packet interactions using Simulation Mode. The configurations include enabling services, creating user accounts, and verifying network functionality through commands and web access.

Uploaded by

tuugu0705
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
19 views2 pages

Cisco Packet Tracer

This document outlines the configuration and analysis of various Application Layer Protocols in Cisco Packet Tracer, including HTTP, DNS, FTP, DHCP, and Email services. It provides step-by-step instructions for setting up each service on the Server0 device, as well as methods for testing and analyzing packet interactions using Simulation Mode. The configurations include enabling services, creating user accounts, and verifying network functionality through commands and web access.

Uploaded by

tuugu0705
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Cisco Packet Tracer: Application

Layer Protocols Configuration


This document contains the steps to configure and analyze Application Layer Protocols in Cisco
Packet Tracer. The services to be configured are HTTP, DNS, FTP, DHCP, and Email (SMTP/POP3).
The process includes setting up the network, configuring services, testing, and analyzing packet
interactions in Simulation Mode.

1. HTTP Server Configuration


Steps to configure the HTTP server on the Server0 device:
1. Open Server0 and go to 'Services' tab.
2. Enable 'HTTP' service.
3. Add a simple webpage for testing.
4. On PC0, open 'Web Browser' and enter the URL 'http://192.168.1.2'. The webpage should
load successfully.

Packet Analysis:
1. Use 'Simulation Mode' to capture HTTP GET and Response packets.

2. DNS Server Configuration


Steps to configure the DNS server on Server0 device:
1. Open Server0 and go to 'Services' tab.
2. Enable 'DNS' service.
3. Add the DNS record:
Name: www.mynetwork.com
IP: 192.168.1.2
4. On PC0, open 'Command Prompt' and type 'nslookup www.mynetwork.com'. It should resolve
to 192.168.1.2.

Packet Analysis:
1. Use 'Simulation Mode' to capture DNS query and response packets.

3. FTP Server Configuration


Steps to configure the FTP server on Server0 device:
1. Open Server0 and go to 'Services' tab.
2. Enable 'FTP' service.
3. Create a user account with:
Username: user1
Password: password123
4. On PC0, open 'Command Prompt' and type 'ftp 192.168.1.2'. Log in with the credentials.
5. Use the 'get' command to download a test file.

Packet Analysis:
1. Use 'Simulation Mode' to capture FTP command and data packets.

4. DHCP Server Configuration


Steps to configure the DHCP server on Server0 device:
1. Open Server0 and go to 'Services' tab.
2. Enable 'DHCP' service.
3. Configure the following settings:
IP Pool: 192.168.1.100 - 192.168.1.200
Gateway: 192.168.1.1
DNS Server: 192.168.1.2
4. On PC0 and PC1, configure the 'IP Configuration' to DHCP.
5. Verify that PCs receive IP addresses dynamically.

Packet Analysis:
1. Use 'Simulation Mode' to capture the DORA (Discover, Offer, Request, Acknowledgment)
process.

5. Email (SMTP/POP3) Server


Configuration
Steps to configure the Email server on Server0 device:
1. Open Server0 and go to 'Services' tab.
2. Enable 'SMTP' and 'POP3' services.
3. Add users:
User1: [email protected]
User2: [email protected]
4. On PC0, open 'Email Client' and send an email from '[email protected]' to
'[email protected]'.

You might also like