Scribd
Upload
8 views2 pages

Active Test

The document outlines procedures for performing active tests on vehicle systems, including checks for T/C interlock relay, warning buzzer, and swing lock solenoid operation. It also describes how to display the program version for various controllers through the analyzer menu. Users are advised on the correct operation of components to ensure safe material handling and vehicle operation.

Uploaded by

bryz4234
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
8 views2 pages

Active Test

The document outlines procedures for performing active tests on vehicle systems, including checks for T/C interlock relay, warning buzzer, and swing lock solenoid operation. It also describes how to display the program version for various controllers through the analyzer menu. Users are advised on the correct operation of components to ensure safe material handling and vehicle operation.

Uploaded by

bryz4234
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

7 DISPLAY 7-113

▪ "ACTIVE TEST 3/3"


NOTICE! When performing "RELIEF SOL" item, make
sure to sit on the seat correctly. If not, OPS is activated
and material handling operation may be limited.
OPTION RLY:
T/C interlock relay forced operation (T/C interlock specifica-
tion vehicle only)
Check that T/C interlock can be enabled and disabled. 7
ON (relay ON): Travel is possible
OFF (relay OFF): Travel is not possible
BUZZER: Warning buzzer forced operation
Check the warning buzzer operation.
ON: Buzzer sounds
OFF: Buzzer stops
SWG TEST LAMP: Swing lock solenoid operation display
Check the swing lock operation states according to travel-
ing and material handling states by OPS light.
Vehicle without swing lock: (Unused)
Vehicle with swing lock:
ON (Indicated):
Operation situation is indicated with OPS light.
OPS light ON: Swing lock operated
OPS light OFF: Swing lock released
OFF (not indicated):
OPS light operates as OPS light (normal operation).
Switch (4): Returning to "ANALYZER MENU" screen
RELIEF SOL:Electromagnetic relief valve forced operation
Check the quality of ERV by any material handling opera-
tion.
ON (SOL ON): Material handling possible
OFF(SOL OFF): Material handling not possible
(Depending on the attachment type, 3 to 5way may be op-
erated.)
(It may be forward tilting due to a load)

Downloaded from www.Manualslib.com manuals search engine


7-114 7 DISPLAY

7.2.3.7 Program Version "VERSION"


Displays program version of each controller.

Operating Procedure
Step 1 Display the "ANALYZER MENU" screen.

Step 2 Press switch (1) 7 times to check that "8. VERSION"


is selected, and press (enter) switch (4) to display
"VERSION" screen.
Switch (4): Returning to "ANALYZER MENU" screen

NOTICE:
Switch (1) Switch (4)
▪ You cannot move directly from "VERSION"
screen to the screen of the other items. Re-
turn to "ANALYZER MENU" screen once, then
move to screen of each item.
▪ "VERSION"
DISPLAY: Displaying program version Program version of
the multifunction display DX
SAS/OPS ECU: SAS/OPS program version
Program version of SAS/OPS controller
ENGINE ECU: Engine program version
Engine controller program version
CAN BRIDGE: Unused
Switch (4): Returning to "ANALYZER MENU" screen

Downloaded from www.Manualslib.com manuals search engine

You might also like