Material Specifications MAT0101

COLOR REQUIREMENTS AND COLOR CONTROL

1. SCOPE

1.1 This specification identifies the appearance properties (color, gloss and surface conditions) for
paint materials, plastics and decals used on CNH products and parts (Table 1). Colors specific only to
decals are listed in Table 2. These requirements apply to all CNH facilities and to suppliers providing
parts to CNH.

1.2 Performance requirements for paint materials and finish painted parts relative to colors
designated in this specification are provided in applicable CNH Material Specifications for metals
plastics, and decals.
1.4 This specification replaces New Holland FNHA-2-J-005.00 Color Designation and Case MS-1
Paint, General Requirements. It does not cover surface finish acceptance criteria; continue to reference
applicable sections of former CNH Company and local standards for these requirements.
1.5 This specification may involve hazardous materials, apparatus, and procedures. This
specification does not claim to address all the safety, health, and environmental issues associated with
its use. Specification users bear responsibility for consulting appropriate safety, health, and
environmental practices, and determining the applicability of regulatory limitations prior to use,
application, or subsequent removal of paint materials supplied to this specification.
2. DESIGNATIONS ON DRAWINGS

2.1 Color designation, performance class and corresponding part numbers must be specified on the
Engineering drawing.
2.2 Figure 1 provides an example of how color and performance class may be specified on the
engineering drawing. See also CNH DWGA110 for additional details related to specifying paint color and
performance classes on drawings.

(Engineering Parts List directly above the Drawing Title Block)

86628054 SPECIFICATION, CL 3 PAINT PERF. STD 86628044
86609757 COLOR, AG RED STD 86628042
878xxxxx BASE PART NAME

Figure 1: Example - How to List Color and Performance Class on Drawings

3. RELATED STANDARDS
CNH DWGA110 (86641291) Requirements for Painted Parts
CNH ENS0605 (48158413) Regulated Substances
CNH MAT0103 (86628044) Paint Material Requirements – Metal Parts
CNH MAT0103Q (48158409) Approved Paint Materials for Metal Parts
CNH MAT0103S (47406457) Process Paint Materials for Metal Parts, Supply Requirements
CNH MAT0105 (87021657) Paint Materials on Plastic Parts, Performance Requirements
CNH MAT0105S (87021659) Paint Materials on Plastic Parts, Initial Supply Requirements
CNH MAT0105Q (87021658) Approved Paint Materials for Plastic Parts,

ISSUED BY ECN NO. NAME

J. HANSEN 03JUN24 35390307 COLOR REQUIREMENTS AND COLOR CONTROL

APPROVED BY REV. PAGE CNH NUMBER

T. SHAH 03JUN24 BE 1 OF 12 86628042

THE INFORMATION HEREON IS THE CONFIDENTIAL AND PROPRIETARY PROPERTY OF CNH INDUSTRIAL N.V. AND/OR
ITS SUBSIDIARIES OR DIVISIONS. ANY USE, EXCEPT THAT FOR WHICH IT MAY BE LOANED, IS PROHIBITED.

UNCONTROLLED COPY When Printed

 Material Specifications MAT0101

3. RELATED STANDARDS (continued)

CNH MAT0110 – 0499: Individual Paint Material or Color Specifications
CNH MAT0350 (87692734) Pressure Sensitive Decal (Marking) Materials
CNH MAT3004 (87523703) Integrally Colored Plastic (ICP) Performance Requirements
CNH MAT3004Q (87523704) Approved Integrally Colored Plastic (ICP) Materials
CNH MTM0110 (86628049) Heat Resistance of Paint
DuPont Standard Colors
Federal Standard 595B - Colors
Munsell Color Systems
New Holland FNHA-4-007 (86529862) Surface Requirements
RAL Standard Colors
4. COLOR DESCRIPTION AND DESIGNATION
TABLE 1: CNH COLOR DESIGNATIONS (Paint Material, Plastics, and Decals)

Part ID Code Gloss (2) Color Standard-Source /

Color Description
Number (Reference) 60°/20 Unique Spec Number (3)
Blue
NH Blue RAL5017 STD 86628042 86575407 --- 50 10 @ 60° RAL840 HR - 5017
NH Blue RAL5024 STD 86628042 87652311 90 / NA RAL 5024
NH Blue STD 86628042 (New NH Blue) 86593620 --- 90 / NA Contact Materials Engineering
NH Blue M3635D STD 86628042 86505504 M-3635-D 50 10@ 60 RAL Design Series – 240-70-30
NH Blue M1639A STD 86628042 86505485 M-1639-a 90 / NA RAL 841 GL – 5017
NH Medium Blue STD 86628042 86513226 NH 2AC 5 5 @ 60° RAL Design Series – 240-50-40
NH Violet – Blue STD 86628042 86511865 NH-22 85 15 @ 60° RAL 841 GL – 5002
Case Translucent Blue 86628042 (Warning Lights) 86629846 MS 40-22 RAL Design Series – 270-20-10
Intense Blue STD 86628042 87015898 Contact Materials Engineering
Blue Green STD 86628042 87024450 Kobelco 90 @ 60° RAL Design Series – 190-60-45
Power Blue STD 86628042 84467154 90 @ 60° CNH; Restricted Application (4)
Signal Violet RAL4008 STD 86628042 47675100 RAL4008 90 @ 60° RAL 841GL 4008
Ulisse Blue STD 86628042 47980894 --- Contact Materials Engineering
Dynamic Blue 91833609 90 / NA Contact Materials Engineering
Red
Ag Red STD 86628042 (Previously Case Red) (1) 86609757 MS-3 90 / 80 Contact Materials Engineering
NH Red STD 86628042 86511877
NH-18 90 / NA Contact Materials Engineering
OBSOLETE replaced by Ag Red (86609757) (OBSOLETE)
NH Red RAL2002 STD 86628042 86575408 --- 90 @ 60° RAL 841 GL – 2002
Case Translucent Red STD 86628042 (Warning Lights) 86629847 MS 40-20 RAL 841 GL – 3001
NH Terracotta STD 86628042 86505495 TA-19 90 @ 60 RAL Design Series – 040-30-40
Whaler Red STD 86628042 87015899 CNH
Flame Red STD 86628042 87020911 RAL3000 90 / NA RAL 841 GL – 3000
Traffic Red STD 86628042 87591055 Kobelco 90 @ 60 RAL 841 GL 3020
Case Viper Red STD 86628042 51533040 90 @ 60 CNH; Restricted Application (4)
CNH Metallic Terracotta 86628042 51598234 CNH; Restricted Application (4)
Yellow and Tan
Case Power Tan STD 86628042 (1) 86609760 MS-42 90 / 80 Contact Materials Engineering
NH Bright Yellow STD 86628042 86572648 --- 90 / NA Contact Materials Engineering
NH Translucent Yellow 86628042 86643495 50 10 @ 60° RAL 841 GL – 1023
Light Tan STD 86628042 86631900 50 10 @ 60° Contact Materials Engineering
Yellow Mark IV STD 86628042 87024451 Kobelco 90 @ 60° Contact Materials Engineering
Dynamic Yellow 91833610 90 / NA RAL 841 GL – 1023
(1) Color requirements in individual color specifications are superseded by MAT0101 and MAT0103 color and performance requirements.
(2) Gloss levels are minimums for paint materials unless a range is specified. For decals consult part drawings to verify proper gloss level. For
integrally colored plastic (ICP) materials and parts, gloss shall meet requirements specified per CNH MAT3004.
(3) See Section 5.2-5.5 for explanation of the method for obtaining Color Standards
(4) Restricted Application; contact CNH Materials Engineering before specifying this color for any application.

NAME REV. PAGE CNH NUMBER

COLOR REQUIREMENTS AND COLOR CONTROL BE 2 OF 12 86628042

UNCONTROLLED COPY When Printed
 Material Specifications MAT0101

TABLE 1 (continued): CNH COLOR DESIGNATIONS (Paint Material, Plastics, and Decals)

Part ID Code Gloss (2) Color Standard-Source /

Color Description
Number (Reference) 60°/20 Unique Spec Number (3)
Gray
NH Gray RAL7043 STD 86628042 84392927 --- 20 @ 60° RAL 840 HR 7043
NH Gray RAL7037 STD 86628042 86603711 --- 50 5 @ 60° RAL 841 GL 7037
NH Gray RAL7024 STD 86628042 86572647 --- 90 / NA RAL 841 GL 7024
NH Gray RAL7046 STD 86628042 87651941 90 / NA RAL 840 HR 7046
NH F-H Gray STD 86628042 86570829 F/H 1.1 90 / NA Federal STD 595 – 26270
Cab Interior Gray STD 86628042 86512347 Superseded to
NH-7D 5 5@ 60°
Superseded (Superseded) Slate Gray (86629853)
Wheat STD 86628042 86614422 MS 40-26 Contact Materials Engineering
Light Wheat STD 86628042 47926201 --- 10 @ 60° Contact Materials Engineering
Dark Wheat RAL DS 080 30 05 STD 86628042 84403003 --- 20 @ 60° RAL Design Series 080 30 05
Case Graphite Gray STD 86628042 (1) 86609761 MS-37 90 / 80 Federal STD 595 – 26008
Case Trim Gray – Light STD 86628042 86629849 MS 40-10 RAL 840 HR 7037
Case Trim Gray Dark STD 86628042 (Dupont 45875L) 86629850 MS 40-11 RAL 840 HR 7011
Case Medium Gray 86628042, (Rubber Parts, DuPont C8439LH) 86629851 MS 40-12 RAL 840 HR 7024
Case Dawn Gray STD 86628042 86629852 MS 40-25 Federal STD 595 - 16081
MS40-28 /
Slate Gray STD 86628042 86629853 RAL 840 HR 7015
RAL7015
CNH CE Gray STD 86628042 86981868 90 / NA Contact Materials Engineering
CNH Dark Gray STD 86628042 (3) 84433810 MS-49 90 / NA Contact Materials Engineering
CNH Gray RAL7004 STD 86628042 47406484 RAL7004 20 @ 60° RAL 840 HR 7004
Fiat Anthracite 650 STD 86628042
(Previously referenced as color 86629853) 47914784 --- CNH; Restricted Application (4)
Fiat Light Gray 670 STD 86628042 CNH; Restricted Application (4)
(Previously referenced as color 47406484) 47914785 ---
Fiat Gray 672 STD 86628042 47914787 --- CNH; Restricted Application (4)

FPT Engine Dark Gray STD 86628042 47472130 RAL7021 / NA RAL 841 GL 7021

Light Gray STD 86628042 87591054 Kobelco 90 @ 60° RAL 841GL 7042
Seat Gray STD 86628042 87037374 10 @ 60° Contact Materials Engineering
8-N Gray STD 86628042 84130983 90 @ 60° Contact Materials Engineering
Granite Crystal STD 86628042 47959255 CNH; Restricted Application (4)
Black
CNH Black STD 86628042 (1) 86600186 M1724P/MS-45 40 3 @ 60° Contact Materials Engineering
NH Black M1724G STD 86628042 86505493 M-1724-G 20 3 @ 60° RAL 840 HR 9011
RAL 840 HR 9011 /
CNH Heat Resistant Black STD 86628042 86629854 MS-16
see MAT0141(86630224)
Heat Resistant Black, High Corrosion Resistance RAL 840 HR 9011 /
87034371
STD 86628042 see MAT0143(87034370)
CNH Hi Temp Ceramic Black STD 88628042 87034363 RAL 841 GL 9011 /
see MAT0142(87034361)
Black RAL9005 STD 86628042 86629856 MS 40-13 RAL 840 HR 9005
Black High GL STD 86628042 87026672 Kobelco 90 @ 60° RAL 841 GL 9005
Grayish Black STD 86628042 84406259 Kobelco 90 / NA Kobelco (KCM)

(1) Color requirements in individual color specifications are superseded by MAT0101 and MAT0103 color and performance requirements.
(2) Gloss levels are minimums for paint materials unless a range is specified. For decals consult part drawings to verify proper gloss level. For
integrally colored plastic (ICP) materials and parts, gloss shall meet requirements specified per CNH MAT3004.
(3) See Section 5.2-5.5 for explanation of the method for obtaining Color Standards
(4) Restricted Application; contact CNH Materials Engineering before specifying this color for any application.

NAME REV. PAGE CNH NUMBER

COLOR REQUIREMENTS AND COLOR CONTROL BE 3 OF 12 86628042

UNCONTROLLED COPY When Printed
 Material Specifications MAT0101

TABLE 1 (continued): CNH COLOR DESIGNATIONS (Paint Material, Plastics, and Decals)

Part ID Code Gloss (2) Color Standard-Source /

Color Description
Number (Reference) 60°/20 Unique Spec Number (3)
Silver and Chrome
Case Silver STD 86628042 (1) 86609759 MS-19 50 / 20 Contact Materials Engineering
Star Bright Silver STD 86628042 47952775 RAL 9023 RAL 840 HR 9023
Fiat Silver STD 86628042 84467155 90 @ 60 CNH; Restricted Application (4)
Silver Anodized STD 86628042 47425531 50 @ 60 CNH; Restricted Application (4)
Ciclo Multichrome STD 86628042 47959258 125 @ 60° CNH; Restricted Application (4)
White
NH White STD 86628042 86512107 NH-23 50 10 @ 60° RAL 840 HR 9003
NH White STD 86628042 (Bianco) 86511879 TA-21 90 / NA Contact Materials Engineering
MS-22-2 /
Steyr White STD 86628042 86629827 80 / NA RAL 841 GL 9018
RAL9018
Green and Brown
Brown RAL8002 STD 86628042 87742366 90 @ 60° RAL 841GL – 8002
NH Ginger M3605D STD 86628042 86505503 M-3605-D 50 10 @ 60° RAL 840 HR 8008
NH Dryer Green STD 86628042 86511875 NH-11E 90 / NA RAL Design Series – 160-60-20
NH Green M5020D STD 86628042 86505506 M-5020-D 50 10 @ 60° RAL Design Series – 140-60-70
NH F-H Green STD 86628042 86529933 3258 C 85 15 @ 60° RAL Design Series – 180-70-40
Green – DuPont 651D STD 86628042 86837126 MS 40-1 Superseded to
Superseded (Superseded) Concord Green (86629861)
Case Translucent Green STD 86628042 (Warning Lights) 86629859 MS 40-19 RAL 841 GL 6005
Steiger Green STD 86628042 86629860 MS-22-1 RAL Design Series – 110-70-70
Concord Green STD 86628042 86629861 MS-22-3 RAL 841 GL 6002
Green RAL6018 STD 86628042 87742367 -- 90 @ 60° RAL 841GL – 6018
Diverse Green STD 86628042 91700046 -- 90 @ 60° Contact Materials Engineering
Orange
NH F-H Orange STD 86628042 85804148 NHI-125 90 / NA RAL Design Series – 50-50-70
CNH Orange RAL2011 47362762 -- 90 / NA RAL 841 GL 2011
Orange STD 86628042 86570828 F/H 0.1/ 90 / NA RAL 841 GL 2009
RAL 2009
Red Orange RAL2008 51590935 -- 90 / NA RAL 841 GL 2008
Case Omaha Orange STD 86628042 86630219 MS 40-14 Federal STD 595 – 12246
(GSA Fed Std 595, Color 12246)
Case Translucent Orange STD 86628042 (Warning Lights) 86630220 MS 40-21 RAL 841 GL 2011
(1) Color requirements in individual color specifications are superseded by MAT0101 and MAT0103 color and performance requirements.
(2) Gloss levels are minimums for paint materials unless a range is specified. For decals consult part drawings to verify proper gloss level. For
integrally colored plastic (ICP) materials and parts, gloss shall meet requirements specified per CNH MAT3004.
(3) See Section 5.2-5.5 for explanation of the method for obtaining Color Standards
(4) Restricted Application; contact CNH Materials Engineering before specifying this color for any application.

NAME REV. PAGE CNH NUMBER

COLOR REQUIREMENTS AND COLOR CONTROL BE 4 OF 12 86628042

UNCONTROLLED COPY When Printed
 Material Specifications MAT0101

TABLE 1 (continued): CNH COLOR DESIGNATIONS (Paint Material, Plastics, and Decals)

Part ID Code Gloss (2) Color Standard-Source /

Color Description
Number (Reference) 60°/20 Unique Spec Number (3)
Safety Colors
Safety Red 91835193 50 10 @ 60° RAL 840 HR 3020
Safety Orange 91835194 50 10 @ 60° RAL 840 HR 2011
Safety Yellow 91835195 50 10 @ 60° RAL 840 HR 1023
NH White (also listed under white color) 86512107 NH-23 50 10 @ 60° RAL 840 HR 9003
Safety Brown 91835196 50 10 @ 60° RAL 840 HR 3011
NH Blue RAL 5017 (also listed under blue color) 86575407 50 10 @ 60° RAL 840 HR 5017
Safety Green 91835203 50 10 @ 60° RAL 840 HR 6024

Safety Colors – Superseded

ANSI Safety Red STD 86628042 86505500 25093 / 50 10 @ 60° Munsell 7.5R 4.0/14 (25093)
(superseded) (superseded) MS40-6 Superseded to Safety Red
(91835193)
ANSI Safety Yellow STD 86628042 86505501 25144 / 50 10 @ 60° Munsell 5Y 8.0/12 (25144)
(superseded) (superseded) MS40-24 Superseded to Safety Yellow
(91835195)
ANSI Safety Orange STD 86628042 86505502 22120 / 50 10 @ 60° Munsell 5YR 6.0/15
(superseded) (superseded) MS40-23 Superseded to Safety Orange
(91835194)
ANSI Safety White STD 86628042 86629835 MS40-7 50 10 @ 60° Munsell N9
(superseded) (superseded) Superseded to NH White
(86512107)

(1) Color requirements in individual color specifications are superseded by MAT0101 and MAT0103 color and performance requirements.
(2) Gloss levels are minimums for paint materials unless a range is specified. For decals consult part drawings to verify proper gloss level. For
integrally colored plastic (ICP) materials and parts gloss shall meet requirements specified per CNH MAT3004.
(3) See Section 5.2-5.5 for explanation of the method for obtaining Color Standards`
(4) Restricted Application; contact CNH Materials Engineering before specifying this color for any application.

NAME REV. PAGE CNH NUMBER

COLOR REQUIREMENTS AND COLOR CONTROL BE 5 OF 12 86628042

UNCONTROLLED COPY When Printed
 Material Specifications MAT0101

TABLE 1 (continued): CNH COLOR DESIGNATIONS (Paint Material, Plastics, and Decals)

Part ID Code Gloss (2) Color Standard-Source /

Color Description
Number (Reference) 60°/20 Unique Spec Number (3)
Primer Colors
Case Yellow Primer STD 86628042 86629829 MS-43 NA Contact Materials Engineering
Case Tan Primer STD 86628042 86629830 MS-43 NA Contact Materials Engineering
Case White Primer STD 86628042 86630221 MS-43 NA Contact Materials Engineering
Case Red Oxide Primer STD 86628042 86629828 MS-43 NA Contact Materials Engineering
Black Primer STD 86628042
86629831 MS-43 NA Contact Materials Engineering
(Previously designated Case Black Primer)
Case Gray Primer STD 86628042 86629832 MS-43 NA Contact Materials Engineering
Gray Primer STD 86628042 86837074 RAL 1015 NA RAL 840 HR 1015
CNH Dark Gray Primer STD 86628042
47867137 Superseded to
(Previously designated as color 84433810) NA
(Superseded) Black Primer (86629831)
Superseded by Black Primer (86629831)
CNH CE Gray Primer STD 86628042 47867142 NA Contact Materials Engineering
NH Dryer Green Primer STD 86628042 86511875 NH-11E NA RAL Design Series – 160-60-20
NH Taupe Primer STD 86628042 86505487 NA Contact Materials Engineering

Conductive Primer Colors

Contact Materials Engineering /
Case Conductive Black Primer STD 86628042 86629836 MS-47 NA
see MAT0130 (86630222)
Contact Materials Engineering
Case Conductive Gray Primer STD 86628042 86629837 MS-47 NA
see MAT0130 (86630222)

Textured Colors
Textured Black, Level 5 STD 86628042 87041284 Contact Materials Engineering

Clear Top-Coats
Semi-Gloss Clear 84489001 CNH; Restricted Application (4)

Metallic Colors
Gray Metallic STD 86628042 87024452 Kobelco 80 @ 60° Contact Materials Engineering
Granite Crystal Metallic-86628042 47959257 90 @ 60° CNH; Restricted Application (4)
Gunmetal Gray STD 86628042 90423670 90 @ 60° Contact Materials Engineering
NH Silver Metal STD 86628042 86511866 NH-19 85 15 @ 60° Contact Materials Engineering
Sand Metallic STD 86628042 87028602 90 @ 60° Contact Materials Engineering
Zinc Gold Metallic STD 86628042 87049221 85 @ 60 Contact Materials Engineering
Clean Blue STD 86628042 91833593 Hydro Blue www.thierry-corp.com
AY112-MBJ
WRK

(1) Color requirements in individual color specifications are superseded by MAT0101 and MAT0103 color and performance requirements.
(2) Gloss levels are minimums for paint materials unless a range is specified. For decals consult part drawings to verify proper gloss level. For
integrally colored plastic (ICP) materials and parts gloss shall meet requirements specified per CNH MAT3004.
(3) See Section 5.2-5.5 for explanation of the method for obtaining Color Standards`
(4) Restricted Application; contact CNH Materials Engineering before specifying this color for any application.

NAME REV. PAGE CNH NUMBER

COLOR REQUIREMENTS AND COLOR CONTROL BE 6 OF 12 86628042

UNCONTROLLED COPY When Printed
 Material Specifications MAT0101

TABLE 1 (continued): CNH COLOR DESIGNATIONS (Paint Material, Plastics, and Decals)

Part ID Code Gloss (2) Color Standard-Source /

Color Description
Number (Reference) 60°/20 Unique Spec Number (3)
Service Colors
Case Power Red STD 86628042 86629838 MS-24/MS-2 RAL 841 GL 2002
Ag Red STD 86628042 (Previously Case Red) (1) 86609757 MS-24/MS-3 90 / 80 Contact Materials Engineering
Case Power Tan STD 86628042 86609760 MS-24/MS-42 Contact Materials Engineering
Case Silver STD 86628042 86609759 MS-24/ MS-19 Contact Materials Engineering
Case Graphite Gray STD 86628042 86609761 MS-24/ MS-37 Contact Materials Engineering
Case Brown STD 86628042 86629839 MS-24/ MS-44 RAL 841 GL 8016
Case Black STD 86628042 86600186 MS-24/ MS-45 Contact Materials Engineering
Case Power White STD 86628042 86629842 MS-24/ MS-7 RAL 841 GL 9001
Case Power Yellow STD 86628042 86629843 MS-24/MS-11 Munsell 5YR 6 10
Case Concord Green STD 86628042 86629844 MS-24/MS22-3 RAL 841 GL 6002
Case Desert Sunset STD 86628042 86629845 MS-24/ MS-6 Contact Materials Engineering
Case Gray Primer STD 86628042 86629832 MS-24/ MS 43 Contact Materials Engineering
Case Red Oxide Primer STD 86628042 86629828 MS -24/ MS-43 Contact Materials Engineering

Non-CNH Colors
Gehl Red STD 86628042 86544595 GR 90 / NA RAL 841 GL 3001
Gehl Gray STD 86628042 86544596 GG 90 / NA Munsell 7.5YR 3 5
Miller Ag Bag Blue STD 86628042 48134827 90 @ 60 CNH Restricted Application (4)
Miller Nitro Red STD 86628042 48134839 90 @ 60 Contact Materials Engineering
Miller Gloss Black STD 86628042 48134840 90 @ 60 Contact Materials Engineering
Sumitomo Red STD 86628042 87047471 LinkBelt 90 @ 60 RAL 841 GL 3013
Sumitomo Gray STD 86628042 87047472 LinkBelt 90 @ 60 RAL 841 GL 7044
Sunbelt Rental Green 86628042 86587683 90 @ 60 RAL Design Series – 150-50-60
Special Order Colors
WT 0069 Vancouver WHITE 86628042 86837096 WT 0069 Contact Materials Engineering
WT 0619 Newport WHITE 86628042 86837097 WT 0619 RAL 841 GL 9001
WT 5638 Virginia ORANGE 86628042 86837098 WT 5638 RAL 841 GL 2000
WT 5651 Colorado ORANGE 86628042 86837099 WT 5651 RAL 841 GL 2010
YELLOW STD 86628042 (Industrial Yellow) 86505488 M 5771A Contact Materials Engineering
WT 6020 Alabama YELLOW 86628042 86837100 WT 6020 Contact Materials Engineering
WT 6113 Carolina YELLOW 86628042 86837101 WT 6113 RAL 841 GL 1037
WT 6642 Airport YELLOW 86628042 86837102 WT 6642 RAL Design Series – 085-80-60
NY Yellow 86628042 (New York Yellow) 86639766 217223(PPG) Contact Materials Engineering
WT 6675 SB YELLOW 86628042 86837125 WT 6675 Contact Materials Engineering
WT 6684 School Bus Yellow 86628042 85805527 WT 6684 Contact Materials Engineering
26280 Lincoln GREY 86628042 86837103 26280 Contact Materials Engineering
WT 5185 Kansas ORANGE 86628042 86837104 WT 5185 RAL 841 GL 2002
Bright YELLOW STD 86628042 (NH Bright Yellow) 86572648 Contact Materials Engineering
WT 7600 Lime YELLOW 86628042 86837105 WT 7600 RAL Design Series – 095-80-70
WT 6695 NC Yellow STD 86628042 85805526 WT 6695 RAL 841 GL 1023
White STD 86628042 85805524 RAL9010 RAL 841 GL 9010
WT 0071 New York WHITE STD 86628042 86837927 WT 0071 RAL 841 GL 1001
Orange RAL2004 STD 86628042 87324880 RAL2004 90 @ 60 RAL 841 GL 2004
WT 3029 Desert Brown STD 86628042 47368294 WT 3029 Contact Materials Engineering
Indiana Yellow STD 86628042 47395709 90 @ 60 Contact Materials Engineering
Illinois Orange STC 86628042 47395882 90 @ 60 Contact Materials Engineering
Alaska School Bus Yellow STC 86628042 47395883 90 @ 60 Contact Materials Engineering
(1) Color requirements in individual color specifications are superseded by MAT0101 and MAT0103 color and performance requirements.
(2) Gloss levels are minimums for paint materials unless a range is specified. For decals consult part drawings to verify proper gloss level. For
integrally colored plastic (ICP) materials and parts gloss shall meet requirements specified per CNH MAT3004.
(3) See Section 5.2-5.5 for explanation of the method for obtaining Color Standards
(4) Restricted Application; contact CNH Materials Engineering before specifying this color for any application.

NAME REV. PAGE CNH NUMBER

COLOR REQUIREMENTS AND COLOR CONTROL BE 7 OF 12 86628042

UNCONTROLLED COPY When Printed
 Material Specifications MAT0101

The colors in Table 2 are only applicable for use with decals.

TABLE 2: CNH COLOR DESIGNATIONS (Specific to Decals Only)

Part ID Code Gloss (1) Color Standard-Source /
Color Description
Number (Reference) 60°/20 Unique Spec Number (2)
Decal Only Colors
Brushed Chrome STD 86628042 86631901 0 Contact Materials Engineering
Frosted Chrome STD 86628042 90450604 Contact Materials Engineering
Mirror Chrome STD 86628042 87037572 Contact Materials Engineering
Smooth Silver 91833611 Contact Materials Engineering
Vent Gray STD 86628042 90450612 Contact Materials Engineering

Dark Red STD 86628042 90450606 Contact Materials Engineering

Light Red STD 86628042 90450609 Contact Materials Engineering

Dark Yellow STD 86628042 90450610 Contact Materials Engineering

Light Yellow STD 86628042 90450611 Contact Materials Engineering

White Reflective STD 86628042 86632227 Contact Materials Engineering

CIH Tri-Stripe White STD 86628042 48034860 Contact Materials Engineering

(1) For decals consult part drawings to verify proper gloss level.
(2) See Section 5.2-5.5 for explanation of the method for obtaining Color Standards

5.0 COLOR CONTROL, SOURCES, DISTRIBUTION

5.1 COLOR PANEL CONTROL

5.1.1 The responsibility for CNH color panels (color masters and color standards) shall be with the
CNH Materials Engineering group. They have worldwide responsibility for the manufacture, color
matching, inventory, distribution, and tracking of CNH color panels. See Diagram 1, which illustrates the
basic steps involved in new and ongoing color control and provides contact information to request CNH
color control panels.

5.1.2 The color masters and color standard panels shall be of minimum size of 50 X 100 mm (2 X 4
inches). The panel can be made of steel, plastic, durable paper, or cardboard. Panels shall be large
enough to provide enough viewing area to compare the color of the color panel to an actual CNH product
to determine if there is a visual color match. These panels may also be measured with a color
spectrophotometer and be used as a standard reference. Color panels shall be stored in an enclosure to
protect the panel from abrasion or excessive exposure to light. Freezer storage -20 C(-4 F) of color
panels to prevent deterioration is recommended.

5.1.3 The color components of the color control panel shall be in a resin base, which minimizes the loss
of the gloss, and shall maintain the color for an extended period. This resin base shall be primarily in the
form of paint. A mixture of predetermined pigments shall be blended into the resin base to create the
color coating of the panel. The resin base and pigment combination shall have an aging durability of at
least 2.0 years exposure in Florida and shall meet or exceed applicable performance Class 3
requirements. Color panels shall have a life expectance of 5 years from the time of manufacture and
shall be replaced or re-certified at the time of expiration. Color panels that are re-certified will obtain a
time extension of no more than 2 years from the previous expiration date.

NAME REV. PAGE CNH NUMBER

COLOR REQUIREMENTS AND COLOR CONTROL BE 8 OF 12 86628042

UNCONTROLLED COPY When Printed
 Material Specifications MAT0101

5.1.4 The color panel shall duplicate a gloss level as determined from the initial color sample. The
deviation in gloss on the color panel shall be less than 3%. Color panels are evaluated for acceptance
by comparison to the color electronic centroid. Color master panels shall have a Delta E of 0.200 or less
from the original color centroid. Color standard panels shall have a Delta E of 0.200 to 0.400 from the
original color centroid. Color is measured in D 65 light, 10 observer, specular UV component included,
large area of view and aperture on CIE Lab coordinates. Gloss is excluded from this reading.
5.2 CNH COLOR PANELS

5.2.1 CNH color panels are developed and available for primary brand identity colors and limited
unique colors including certain metallic colors. Colors with CNH color panels are identified in Table 1
column 5 with the “CNH” code. All other colors in Table 1 are controlled with industry standard color
systems as indicated in column 5.

5.2.2 The CNH Materials Engineering group will maintain a library of CNH color panels and has sole
responsibility for the distribution of these color panels to authorized personnel upon request.

5.2.3 CNH color panels are available through, the Color Engineer, CNH Materials Engineering group,
see Diagram 1. The Color Engineer is responsible to control and track the distribution of all CNH color
panels. Remote locations may be established to assist with distribution of CNH color panels.

5.3. INDUSTRY COLOR STANDARDS

Industry color standard codes for secondary CNH colors are identified in Table 1 column 5. These colors
will be compared to the designated industry standard for color match and control in CNH applications.
Industry color standards used are RAL, Federal and Munsell. CNH facilities, groups and suppliers must
purchase these industry standards for color control. Information to obtain these designated color
standards in Table 1 is available over the internet from the following sources. Contact CNH Materials
Engineering for assistance if necessary.

RAL Color Standards

North America: www.dorncolor.com
Rest of World: https://www.ral-umwelt.de/
Federal Color Standards
All locations: www.fed-std-595.com
Munsell Colors
All locations: www.xrite.com/top_munsell.aspx?action=products&CategoryID=22&Type=Parent

5.4 COLORS WITH NO INDUSTRY STANDARD

Where “Contact Materials Engineering” is indicated for a color in Table 1 column 5, no industry color
standard or CNH color master is readily available. For these colors contact CNH Materials Engineering
for assistance.

NAME REV. PAGE CNH NUMBER

COLOR REQUIREMENTS AND COLOR CONTROL BE 9 OF 12 86628042

UNCONTROLLED COPY When Printed
 Material Specifications MAT0101

5.5 CNH COLOR MASTER PROCESS

5.5.1 After receiving the original color sample, the CNH Materials Engineering group shall determine
the electronic color centroid, assign a color control part number and submit a color sample to the
manufacturer of the CNH color master. The manufacturer shall measure the original color master and
develop the color formula within the criteria specified in section 5.1. The color shall be blended so that
the color variation shall be less than 0.20 Delta E from top to bottom or from side to side. Visible
metamerism is not permitted for a color sample when observed under CIE Illuminant light sources: D65,
daylight; A-10, incandescent; and F02-10, (CWF) cool white fluorescent. After the product has been
produced, the CNH color master standards shall be submitted to CNH Materials Engineering group for
evaluation.

5.5.2 CNH Materials Engineering shall evaluate the prepared CNH color master standards. If approval
is granted, the approval shall be provided in writing and a copy retained with a CNH color master for
future reference.

5.5.3 For the manufacture of future batches of CNH color masters it is recommended that the color
match should be in the same color quadrant as the original color master batch. Future batches shall be
within 0.20 Delta E of the original CNH color master centroid.

5.5.4 A label shall be affixed to the backside of the prepared color master and color standard panels
and shall contain information similar to that seen in Figure 2. All CNH color panels shall have serial
numbers for identification and record keeping.

FIGURE 2: Label Types for Color Master and Color Standard Panels

NAME REV. PAGE CNH NUMBER

COLOR REQUIREMENTS AND COLOR CONTROL BE 10 OF 12 86628042

UNCONTROLLED COPY When Printed
 Material Specifications MAT0101

5.6 PRODUCTION COLOR APPROVAL

5.6.1 Color verification of initial batches shall be performed on all colored parts, whether painted or
integrally colored (e.g., Plastic). For a painted part, hide shall be determined prior to having any color
check. After hide is determined, then the thickness of paint to provide hide plus 1.0 mils (0.001 inches),
(0.0254 mm) shall be applied to the color test panel and both visual and spectrophotometer color shall be
evaluated.

5.6.2 Labeled Color Master or Standard panels provided by CNH Materials Engineering, or Industry
Standards are the only allowable standards to be used for color development, matching, or verification
for both numeric and visual evaluation.

NAME REV. PAGE CNH NUMBER

COLOR REQUIREMENTS AND COLOR CONTROL BE 11 OF 12 86628042

UNCONTROLLED COPY When Printed
 Material Specifications MAT0101

DIAGRAM 1 CNH COLOR CONTROL FLOW DIAGRAM

Color Selection by:

New and Ongoing Color - Styling Committees
Control - Marketing
- Product Management

New and Ongoing Color Control

CNH ME receives sample
Responsibility
of the selected color.
--CNH Materials Engineering (CNH ME)

CNH ME evaluates color sample,

establishes electronic color centroid,
designates color control part number

CNH ME submits original color master

to producer of color masters.

Color master producer matches

color and submits the sample for
color review to CNH ME

Is color
acceptable? Modify Formulation
No

Yes

CNH ME requests the

manufacture of color masters.

Color master supplier

produces color master panels
and submits to CNH ME

CNH ME reviews master panels for correct

color tolerance and creates labels indicating
an identification number and color To request CNH color panels
coordinate values contact CNH ME:
John Fornadel, Plastics / Color Engineer
phone: 717-355-1622
Color masters distributed to e-mail: [email protected]
OEM and suppliers on request. or
Jesika Wilhelm, Paint Specialist
phone: 717-355-3774
Suppliers are responsible for batch to batch color e-mail: [email protected]
control of production paint, decal and plastic
materials. Receiving plant verifies color match.

NAME REV. PAGE CNH NUMBER

COLOR REQUIREMENTS AND COLOR CONTROL BE 12 OF 12 86628042

UNCONTROLLED COPY When Printed