Intergraph Smart® Electrical

Installation & Configuration Checklist

Software Version: 2018 (08.00.00)
(Intergraph Smart® Engineering Manager 2018)
Installation of this version is from a DVD or a set of files downloaded from Intergraph's eCustomer web site.
Unless otherwise specified, the topics listed in the Additional Resources column can be found in the Smart® Electrical Installation Guide .
The checklist below applies to the standalone installation of Smart Electrical. For guidelines about using Smart Electrical in an integrated environment, see the SmartPlant Foundation Installation and Configuration Checklist.

Note: To run Smart Electrical you must connect to a site and plant that were created using Smart Engineering Manager. A plant created in Smart Engineering Manager with the Smart Electrical application associated is a prerequisite for being able to use Smart Electrical.

Task No. Tool Task Step / Software Version Comments Additional Resources Notes

Set Up the Database Server

Install Operating System or verify that the installed Supported Operating Systems: Hardware and Software The operating system must be
1.0 Operating System Operating System is compatible with Smart Electrical * Microsoft Windows Server 2012 R12 Recommendations > Smart Electrical installed in the account where you
Database Server recommendations * Microsoft Windows Server 2016 (Standard or Enterprise) Database Server have administrator privileges.
1.1 Operating System Verify that the network can be accessed

Supported Database Platforms: See Smart Engineering Manager

Install Database Software or verify that the installed
* Microsoft SQL Server 2014 Installation and Upgrade Guide: Installing
2.0 Database Platform software is compatible with Smart Electrical
* Microsoft SQL Server 2016 (Standard or Enterprise edition) and Configuring Oracle or Installing and
Database Server recommendations
* Oracle Database 12c R1 (12.1) Configuring Microsoft SQL Server

Create a database to be used with the Smart Electrical

2.1 Oracle or SQL Server
Database Server

Set Up a File Server

File Server and Database Server
can reside on the same machine as
Supported Operating Systems: Hardware and Software
Verify that the Operating System is compatible with long as this machine meets the
3.0 Operating System * Microsoft Windows Server 2012 R2 Recommendations > Smart Electrical
SmartPlant Electrical File Server recommendations requirements for both the
* Microsoft Windows Server 2016 Database Server
Database Server and the File
Server.
3.1 Operating System Verify that the network can be accessed Supports Internet Protocol IPv4 only
See the Smart Electrical Installation and
4.0 Network Share Create a network share
Upgrade Guide
Delivered on the Smart Electrical Installation DVD. To launch the
Configuring Reference Data for Smart Microsoft .Net Framework 4.6.2 is
Smart Electrical Installation setup, click the 'Additional Software' link on the Smart Electrical
5.0 Install Smart Electrical Reference Data Electrical > Install Smart Electrical required for Reference Data
DVD Installation Wizard 'Welcome' page and then click the 'Smart Electrical
Reference Data installation
Reference Data' link.

Set Up the Smart Electrical Workstation Computer

Supported Operating System: Hardware and Software Windows 7 is certified with User
Verify that the Operating System is compatible with
6.0 Operating System * Microsoft Windows 7 Professional and Enterprise SP1, 64-bit Recommendations > Smart Electrical Access Control (UAC) ‘On’ at Level
Smart Electrical Workstation recommendations
* Microsoft Windows 10 Professional and Enterprise Workstation 3 (Default)
6.1 Operating System Verify that the network can be accessed Supports Internet Protocol IPv4 only

Microsoft .Net Framework 4.6.2 is required for launching the setup.exe file for
Smart Electrical and for connectivity when installing Oracle Client. It must be
Loading Smart Electrical Prerequisite
6.2 .NET Framework Microsoft .NET Framework 4.6.2 installed before installing Oracle Client.
Software

Microsoft .Net Framework 4.6.2 is required for working with SmartPlant Electrical.

1
 Intergraph Smart® Electrical
Installation & Configuration Checklist
Software Version: 2018 (08.00.00)
(Intergraph Smart® Engineering Manager 2018)
Installation of this version is from a DVD or a set of files downloaded from Intergraph's eCustomer web site.
Unless otherwise specified, the topics listed in the Additional Resources column can be found in the Smart® Electrical Installation Guide .
The checklist below applies to the standalone installation of Smart Electrical. For guidelines about using Smart Electrical in an integrated environment, see the SmartPlant Foundation Installation and Configuration Checklist.

Note: To run Smart Electrical you must connect to a site and plant that were created using Smart Engineering Manager. A plant created in Smart Engineering Manager with the Smart Electrical application associated is a prerequisite for being able to use Smart Electrical.

Task No. Tool Task Step / Software Version Comments Additional Resources Notes
The client database software must
Set Up the Database Server be of the same version as the
server database software.

Supported Database Client: Oracle 32-bit Client is required for

Install Database Client Software or verify that the Hardware and Software
* Oracle 12c R1 Client (12.1.0.2) both 32-bit and 64-bit Oracle
7.0 Database Platform installed software is compatible with Smart Electrical Recommendations > Smart Electrical
databases.
Database Server recommendations Workstation
For SQL Server, no client installation is required.
Do not use Oracle "light client" as
it does not include some of the
required DLLs.

Smart Electrical Installation Install Prerequisite Software on the Smart Electrical Loading Smart Electrical Prerequisite
8.0
DVD Workstation Software
Hardware and Software Recommendations
Required for viewing the Readme file and the online documentation delivered
8.1 Internet Explorer Microsoft Edge Browser > Smart Electrical Workstation > Software
with the software
Prerequisites
Microsoft XML Hardware and Software Recommendations
8.2 Core Services MSXML 6.0 Service Pack 1 or 6.0 Service Pack 3 > Smart Electrical Workstation > Software
(MSXML) Prerequisites
9.0 Optional Software
Refer to SPEMInstall_Checklist.xlsx
See the Smart Engineering Manager
9.1 Smart Engineering Manager Smart Engineering Manager 2018 Used for new site and plant creation, upgrade and other administrative functions delivered with Smart Engineering
Installation and Upgrade Guide
Manager
Hardware and Software Recommendations
9.2 PDF Reader Required for reading the print documentation delivered with the software > Smart Electrical Workstation > Software
Prerequisites
Hardware and Software Recommendations
*Microsoft Office 2013 (32-bit only) Microsoft Excel is required for working with report templates and generating
9.3 Microsoft Office > Smart Electrical Workstation > Software
*Microsoft Office 2016 (32-bit only) reports.
Prerequisites
Hardware and Software Recommendations
9.4 Citrix Citrix XenApp 7.6 (On Windows Server 2016) Needed for working in a thin-client environment > Smart Electrical Workstation > Optional
Software
9.5 SmartSketch SmartSketch 2016
Hardware and Software Recommendations
9.6 AutoCAD Autodesk AutoCAD 2013 Used for viewing files generated using the 'Save As' feature > Smart Electrical Workstation > Optional
Software
Hardware and Software Recommendations
9.7 MicroStation Bentley MicroStation 8 > Smart Electrical Workstation > Optional
Software

2
 Intergraph Smart® Electrical
Installation & Configuration Checklist
Software Version: 2018 (08.00.00)
(Intergraph Smart® Engineering Manager 2018)
Installation of this version is from a DVD or a set of files downloaded from Intergraph's eCustomer web site.
Unless otherwise specified, the topics listed in the Additional Resources column can be found in the Smart® Electrical Installation Guide .
The checklist below applies to the standalone installation of Smart Electrical. For guidelines about using Smart Electrical in an integrated environment, see the SmartPlant Foundation Installation and Configuration Checklist.

Note: To run Smart Electrical you must connect to a site and plant that were created using Smart Engineering Manager. A plant created in Smart Engineering Manager with the Smart Electrical application associated is a prerequisite for being able to use Smart Electrical.

Task No. Tool Task Step / Software Version Comments Additional Resources Notes

9.8
Integrated Development
Visual Studio 2012 or 2013
Set Up the Database Server
Used for API
Hardware and Software Recommendations
> Smart Electrical Workstation > Optional
Environment (IDE)
Software
Hardware and Software
Recommendations > Smart Electrical
Workstation > Software Prerequisites
SmartPlant License Manager
10.0 Install SmartPlant License Manager
12.00.83.00 Installing the Software > Install
SmartPlant Electrical

Smart Electrical Installation Installing the Software > Install Smart

11.0 Install Smart Electrical Software Delivered on the Smart Electrical Installation DVD.
DVD Electrical