Intergraph Smart® Electrical

Installation & Configuration Checklist

Software Version: 2018 (08.00.00)
(Intergraph Smart® Engineering Manager 2018)
Installation of this version is from a DVD or a set of files downloaded from Intergraph's eCustomer web site.
Unless otherwise specified, the topics listed in the Additional Resources column can be found in the Smart® Electrical Installation Guide.
The checklist below applies to the standalone installation of Smart Electrical. For guidelines about using Smart Electrical in an integrated environment, see the SmartPlant Foundation Installation and Configuration Checklist.
Note: To run Smart Electrical you must connect to a site and plant that were created using Smart Engineering Manager. A plant created in Smart Engineering Manager with the Smart Electrical application associated is a prerequisite for being
able to use Smart Electrical.
Task No. Tool Task Step / Software Version Comments Additional Resources Notes

Set Up the Database Server

Install Operating System or verify that the Supported Operating Systems: The operating system must
Hardware and Software
installed Operating System is compatible * Microsoft Windows Server 2012 R12 be installed in the account
1.0 Operating System Recommendations > Smart
with Smart Electrical Database Server * Microsoft Windows Server 2016 (Standard or where you have
Electrical Database Server
recommendations Enterprise) administrator privileges.
1.1 Operating System Verify that the network can be accessed

Supported Database Platforms: See Smart Engineering Manager

Install Database Software or verify that the
* Microsoft SQL Server 2014 Installation and Upgrade Guide:
installed software is compatible with Smart
2.0 Database Platform * Microsoft SQL Server 2016 (Standard or Enterprise Installing and Configuring Oracle or
Electrical Database Server
edition) Installing and Configuring Microsoft
recommendations SQL Server
* Oracle Database 12c R1 (12.1)
Create a database to be used with the Smart
2.1 Oracle or SQL Server
Electrical Database Server

Set Up a File Server

File Server and Database
Server can reside on the
Verify that the Operating System is Supported Operating Systems: Hardware and Software same machine as long as
3.0 Operating System compatible with SmartPlant Electrical File * Microsoft Windows Server 2012 R2 Recommendations > Smart this machine meets the
Server recommendations * Microsoft Windows Server 2016 Electrical Database Server requirements for both the
Database Server and the
File Server.
Supports Internet Protocol IPv4
3.1 Operating System Verify that the network can be accessed
only
See the Smart Electrical Installation
4.0 Network Share Create a network share
and Upgrade Guide

Delivered on the Smart Electrical Installation DVD. To

Configuring Reference Data for Microsoft .Net Framework
Smart Electrical launch the setup, click the 'Additional Software' link on
5.0 Install Smart Electrical Reference Data Smart Electrical > Install Smart 4.6.2 is required for
Installation DVD the Smart Electrical Installation Wizard 'Welcome' page
Electrical Reference Data Reference Data installation
and then click the 'Smart Electrical Reference Data' link.

Set Up the Smart Electrical Workstation Computer

Supported Operating System:
Verify that the Operating System is Hardware and Software Windows 7 is certified with
* Microsoft Windows 7 Professional and Enterprise SP1,
6.0 Operating System compatible with Smart Electrical Recommendations > Smart User Access Control (UAC)
64-bit
Workstation recommendations Electrical Workstation ‘On’ at Level 3 (Default)
* Microsoft Windows 10 Professional and Enterprise
Supports Internet Protocol IPv4
6.1 Operating System Verify that the network can be accessed
only
Microsoft .Net Framework 4.6.2 is required for launching the setup.exe
file for Smart Electrical and for connectivity when installing Oracle
Client. It must be installed before installing Oracle Client. Loading Smart Electrical Prerequisite
6.2 .NET Framework Microsoft .NET Framework 4.6.2
Software
Microsoft .Net Framework 4.6.2 is required for working with
SmartPlant Electrical.

1
 Intergraph Smart® Electrical
Installation & Configuration Checklist
Software Version: 2018 (08.00.00)
(Intergraph Smart® Engineering Manager 2018)
Installation of this version is from a DVD or a set of files downloaded from Intergraph's eCustomer web site.
Unless otherwise specified, the topics listed in the Additional Resources column can be found in the Smart® Electrical Installation Guide.
The checklist below applies to the standalone installation of Smart Electrical. For guidelines about using Smart Electrical in an integrated environment, see the SmartPlant Foundation Installation and Configuration Checklist.
Note: To run Smart Electrical you must connect to a site and plant that were created using Smart Engineering Manager. A plant created in Smart Engineering Manager with the Smart Electrical application associated is a prerequisite for being
able to use Smart Electrical.
Task No. Tool Task Step / Software Version Comments Additional Resources Notes

The client database

software must be of the
same version as the server
database software.
Install Database Client Software or verify Supported Database Client:
Hardware and Software Oracle 32-bit Client is
that the installed software is compatible * Oracle 12c R1 Client (12.1.0.2)
7.0 Database Platform Recommendations > Smart required for both 32-bit and
with Smart Electrical Database Server
Electrical Workstation 64-bit Oracle databases.
recommendations For SQL Server, no client installation is required.
Do not use Oracle "light
client" as it does not include
some of the required DLLs.

Smart Electrical Install Prerequisite Software on the Smart Loading Smart Electrical
8.0
Installation DVD Electrical Workstation Prerequisite Software
Hardware and Software
Required for viewing the Readme file and the online documentation
8.1 Internet Explorer Microsoft Edge Browser Recommendations > Smart Electrical
delivered with the software
Workstation > Software Prerequisites

Microsoft XML Hardware and Software

8.2 Core Services MSXML 6.0 Service Pack 1 or 6.0 Service Pack 3 Recommendations > Smart Electrical
(MSXML) Workstation > Software Prerequisites
9.0 Optional Software
Refer to SPEMInstall_Checklist.xlsx
Used for new site and plant creation, upgrade and other administrative See the Smart Engineering Manager
9.1 Smart Engineering Manager Smart Engineering Manager 2018 delivered with Smart Engineering
functions Installation and Upgrade Guide
Manager

Hardware and Software

Required for reading the print documentation delivered with the
9.2 PDF Reader Recommendations > Smart Electrical
software
Workstation > Software Prerequisites

Hardware and Software

*Microsoft Office 2013 (32-bit only) Microsoft Excel is required for working with report templates and
9.3 Microsoft Office Recommendations > Smart Electrical
*Microsoft Office 2016 (32-bit only) generating reports.
Workstation > Software Prerequisites

Hardware and Software

9.4 Citrix Citrix XenApp 7.6 (On Windows Server 2016) Needed for working in a thin-client environment Recommendations > Smart Electrical
Workstation > Optional Software
9.5 SmartSketch SmartSketch 2016
Hardware and Software
9.6 AutoCAD Autodesk AutoCAD 2013 Used for viewing files generated using the 'Save As' feature Recommendations > Smart Electrical
Workstation > Optional Software

Hardware and Software

9.7 MicroStation Bentley MicroStation 8 Recommendations > Smart Electrical
Workstation > Optional Software

Hardware and Software

Integrated Development
9.8 Visual Studio 2012 or 2013 Used for API Recommendations > Smart Electrical
Environment (IDE)
Workstation > Optional Software

2
 Intergraph Smart® Electrical
Installation & Configuration Checklist
Software Version: 2018 (08.00.00)
(Intergraph Smart® Engineering Manager 2018)
Installation of this version is from a DVD or a set of files downloaded from Intergraph's eCustomer web site.
Unless otherwise specified, the topics listed in the Additional Resources column can be found in the Smart® Electrical Installation Guide.
The checklist below applies to the standalone installation of Smart Electrical. For guidelines about using Smart Electrical in an integrated environment, see the SmartPlant Foundation Installation and Configuration Checklist.
Note: To run Smart Electrical you must connect to a site and plant that were created using Smart Engineering Manager. A plant created in Smart Engineering Manager with the Smart Electrical application associated is a prerequisite for being
able to use Smart Electrical.
Task No. Tool Task Step / Software Version Comments Additional Resources Notes

Hardware and Software

Recommendations > Smart
Electrical Workstation >
Software Prerequisites
SmartPlant License
10.0 Install SmartPlant License Manager
Manager 12.00.83.00
Installing the Software > Install
SmartPlant Electrical

Smart Electrical Installing the Software > Install

11.0 Install Smart Electrical Software Delivered on the Smart Electrical Installation DVD.
Installation DVD Smart Electrical