VistaPro - Generic Deployment Guide
VistaPro - Generic Deployment Guide
Installation Guide
Disclaimer
This document contains proprietary information and is not intended for public
distribution. All information within this document is the property of Hazen.ai (Ro'yat
Al Haseb Li Taqniyat Al Ma'alomat LLC), unless otherwise stated. All rights reserved.
Content
1. HARDWARE OVERVIEW 3
1.1. CAMERA 3
1.2. IR ILLUMINATOR 4
1.3. PACKAGE CONTENT 5
1.4. ADDITIONAL ITEMS REQUIRED 7
2. CONNECTION OVERVIEW 8
2.1. NETWORK 8
2.2. POWER 9
3. SETTING UP THE SYSTEM 10
3.1. POWERING UP THE CAMERA AND IR 10
4. FIELD DEPLOYMENT 12
4.1. DEPLOYMENT OVERVIEW 12
1. HARDWARE OVERVIEW
1.1. CAMERA
2x M5 x 10
50 mm
Ethernet Port Power Port
1.2. IR ILLUMINATOR
Teltonika RUTX50
3 5G router with Gigabit switch 1
Includes din rail and wall mount
10 SIM 4G/5G 1
2 Hose Clamp 4
6 Network cable 1
Important Note: All electrical and non-electrical components should be used as per local safety standard practice
2. CONNECTION OVERVIEW
2.1. NETWORK
2.2. POWER
IR Cable Layout
4. Field Deployment
4.1. Deployment Overview
Road side pole placed maximum 4 meters away from the 1st lane, with camera height of 5 – 6 meters
and IR lamps placed 1 meter above the camera.
Installation on the kerb-side of the road, on the side of the pavement or sidewalk, and opposite side of
median, or on top of the first lane from kerb-side