TeVii Technology www.tevii.

com

User Manual

Version 2.2

1
 Table of Contents

Ch1. Product Introduction ............................................................................ 3

1-1 Introduction .......................................................................................... 3
1-2 Feature................................................................................................ 3
1-3 System requirements ........................................................................... 3
1-4 Package contents ................................................................................ 4

Ch2. Installation............................................................................................ 5
2-1 Hardware Installation ........................................................................... 5
2-1-1 USB Box ..................................................................................... 5
2-1-2.PCI / PCIe Card.......................................................................... 6
2-2 Software installation ............................................................................. 7
2-2-1 myTeVii and driver installation.................................................... 7
2-2-2 TeViiData installation.................................................................. 11
2-2-3 ProgDVB Pro installation ………………………………………… 14

Ch3. Software Setting ................................................................................... 19

3-1 myTeVii ................................................................................................ 19
3-2 TeViiData ............................................................................................. 30
3-3 ProgDVB Pro……………………………………………………………… 33
3-4 Remote control.................................................................................... 37

Ch4. Trouble Shooting .................................................................................. 40

2
Ch1. Product Introduction

1-1 Introduction

The product is fully compatible for your PC / NB use & enables you to watch digital
radio and TV programs. Please read the instructions carefully before installation.

1-2 Feature

DVB-S/S2 TV and radio program receiving on PC

Real-time and Pre-Scheduled Recording (PVR)
Time-Shifting
Blind scan
HDTV S (MPEG2) / S2 (H.264 / AVC)
DVB Electronic Program Guide (EPG)
Teletext
Subtitles
DiSEqC 1.0/1.1/1.2 support
Full screen display
On screen display
Remote control supported
Fully compatible Windows Media Center(MCE)

1-3 System requirements (recommended platform)

2.0 GHz CPU or above (Core 2 Duo 2.4GHz for HDTV)

256 MB RAM (required), 512 MB RAM (recommended)
Sound card for audio / onboard sound chip
One free USB2.0/3.0 port (for USB models)
One free PCI slot (for PCI models)
One free PCIe slot (for PCIe models)
CD-ROM / DVD-ROM (for driver & application installation)
Windows XP / 7 / 8
Microsoft Direct X 9.0 or above

3
1-4 Package contents

TeVii Digital TV PCI / PCIe Card or USB Box

Remote control (with batteries)
USB cable (for USB models)
IR receiver cable (for PCI / PCIe models)
Power adapter (for USB models)
Quick Start Guide
Software CD (driver and application software)

4
Ch2. Installation

2-1 Hardware installation

2-1-1 USB box

Step 1:
Connect the signal cable (from LNB) & DC power to digital TV product

Step 2:
Connect USB cable to the USB port on PC

5
2-1-2.PCI / PCIe Card

Step 1:
Make sure the computer and peripheral equipments are power off

Step 2:
Plug into PCI / PCIe slot in PC ＆ lock screw tightly of bracket with PC case

Step 3:
Connect the signal cable & IR receiver cable to your digital TV card

6
2-2 Software installation

2-2-1 myTeVii and driver installation

Step 1:
When you insert PCI / PCIe or connect USB Digital TV product to PC,
“Found New Hardware Wizard” dialog will pop out; choose ”No,,not this time” and
click ”Cancel”

Step 2:
Insert driver CD into CD-ROM, installshield will automatically start & the below
window will appear. If the window doesn’t appear, start installshield from driver CD
manually. Click “Install driver & myTeVii”.

7
Step 3:
To start software installation; click “Next” button on each installation step.

Step 4:
Tick ”I accept the terms in the License Agreement” and click “Next”

8
Step 5:
Choose components and click “Next”

Step 6:
Choose Destination Folder and click “Next”

9
Step 7:
Click ”Install”

Step 8:
Installation complete, click “Next”

10
 Step 9:
Completing myTeVii and driver setup, click “Finish”

2-2-2 TeViiData installation

Step 1:
Insert the driver CD into CD-ROM, .The installshield will automatically start &
the window below will appear. If the window doesn’t appear, start installshield from
driver CD manually. Click “Install TeViiData”. (Please install “Driver & myTeVii”
before this step)

11
Step 2:
TeViiData setup, click “Next”

Step 3:
Please choose Destination Folder and click “Next”

12
Step 4:
Click “Install”

Step 5:
Installation completed, click “Next”

13
 Step 6:
Click “Finish”

2-2-3 ProgDVB Pro installation

Step 1:
Click “Install ProgDVB Pro” and the process will be started.
(Please install “Driver & myTeVii” before this step)

14
Step 2:
Click “I Agree”

Step3:
Click “Next”

15
Step 4:
Click “Next”

Step 5:
Click “Next”

16
Step 6:
Click “Next”

Step 7:
Click “Next”

17
Step 8:
Click “Install”

Step 9:
Installation completed, click “Finish”.

18
Notice: For Windows XP user, you have to install Microsoft .NET
Framework 3.5 to make ProgDVB working. You could browse this CD
and install manually or find the latest version from Microsoft website.

Step 10:
ProgDVB Pro registration
To have full version of ProgDVB Pro, please register with valid key comes with
software CD. Without registration, the software will be expired in 21 days.
Go Desktop and double click ProgDVB 6 icon for LNB settings (for the first time use).

Go to “Help” menu and click “Registration” from sub menu.

19
Step 11:
Please make sure your PC is connected to internet to execute online
activation. Fill in the key in CDID box, owner name and e-mail account
, then click “Activation”

Step 12:
Click OK and close ProgDVB Pro

20
 Step 13:
Go Desktop and double click ProgDVB6 Icon, following pop-out
dialog will show that you have successfully registered ProDVB6 under
register name.

Ch3. Software setting

3-1 myTeVii
Step 1:
After driver installation finished, you will see the icon below on Desktop. Run it by double
clicking the icon.

myTeVii icon on desktop

21
Step 2:
After splash-screen, you will see main window of application. Right‐click on video area
(at the first time, it will look like large black window). Pop-up
menu appears: Settings →Tuner Settings & Scan…

Step 3:
LNB/Transponders settings. you will see settings for satellites and transponders.
Find and click on required satellite on the list. Fill appropriate LOF1, LOF2, SW values.
Please read instruction of LNB convertor you use. Don’t forget to click “Apply”
button when you finish satellite LNB parameters setup.

22
Note:
If you see universal (dual-band) Ku LNBF then usual parameters are:
LOF1=10600000, LOF2=9750000, SW=11700000. If you use DiSEqC switch or
motor then click on DiSEqC button and choose appropriate LNB input port.

Step 4:
Click on button “Sel All” (right side of window) to select all transponders or while
holding “Ctrl” key click sequentially on every transponder you want to scan. Click
on button “-=SCAN=-“ to start scanning process.

23
Step 5:
DiSEqC Switch settings: Tick “First DiSEqC Switch” and choose Committed,
LNB1..LNB4 (depend on required port of switch)

Step 6:
Scan Dialog: You can watch scanning process in this window. You may interrupt
scanning by clicking “stop” button. After scanning completed, close scanning
window and the LNB dialog.

24
Step 7:
Right-click on main window to open pop-up menu then follow
steps below: Display → Video On/Off. Make sure there is a tick sign on this
option. If there is no such tick sign then click on it.

Step 8:
Click on any channel name with green “V” sign. You may organize channel view
by clicking on any following buttons “Sat”, “Prov”, NetID”, “Transp”, “Fav”, “All”

Three small buttons “All”, “V”, “R” can filter channels to show TV only, radio only
or all channels.
25
Other setting:
Right-click on video screen. Pop-up menu appears. Follow menu:
Settings → General settings…

Miscellaneous:
You can setup more detail functions, such as Full screen, LNB power turn off,
Database backup, sleep timer…etc

26
Display:
You can set up display options.

Interface:
You can choose preference language on this page.

27
Recording:
Setting recording options such as recording destination, file name format
& recording format.

AutoGraph:
Setting MPEG-2/H.264 AVC decoder you preferred; if you are using Windows
MCE, Microsoft Decoder is recommended.

28
IVR/OSD:
Setting resolution , Aspect Ratio & On-Screen-Display (OSD).

TimeShift:
Setting variants for TimeShift function such as: buffer length, recording speed &
play speed.. etc.

29
EPG:
Setting EPG (Electronic Program Guide)

Shortcuts:
Setting Hotkey & Shortcuts by double clicking the function to change.

30
Volume/Audio:
Setting Audio options

Subtitles:
Setting subtitle language

31
3-2 TeViiData
Step 1:
After driver installation finished, TeViiData icon will appear on Desktop. Run it by
double clicking the icon.

TeViiData icon on your desktop

Step 2:
After splash-screen, you will see main window of application. Please click “New”

32
Step 3:
Fill in the parameters for satellite inuse, for example: Frequency,
Symbol Rate, LNB, Polarity, DiSEqC, 22K, and click “Lock Transponder”

Note:
Once the transponder is locked, you will see Strength & Quality indicators in color
bar and the LockStatus icon turns green.

Step 4:
Click “Network Settings” into this page & insert PID

33
 Step 5:
TeViiData allows you to change MAC Address by yourself, click “Change”, enter
the "MAC Address" you need in the column as below

Step 6:
When you finish all setups, don’t forget to click “Apply”

Note:
TeViiData is a stable and easy satellite internet software, with which you could surf high
speed broadband via satellite, but you need to apply for a valid account from your local
Satellite Internet ISP before using TeViiData.
34
3-3 ProgDVB Pro

Step 1:
Go Desktop and double click ProgDVB 6 icon for LNB settings (for the first time use).

Step 2:
Select LNB setting and click “OK”.

35
Step 3:
Click “OK”

Step 4:
Click “Yes” to start channel searching.

Step 5:
Scanned TV channels will be available to watch after search.

36
3-4 Remote Control
The outlook of remote control and button definitions shown as below:

37
 ProgDVB remote control keys definition

Key Name Default Action OSD

Mute Mute
Power Shut Down
1 1 Channel list
2 2 PIP
3 3
4 4 Information
5 5 Service
6 6 Video
7 7 Audio
8 8 Subtitle
9 9 Options
0 0 Close
Recall Previous Channel
Fav
Vol+ Vol+
Vol- Vol-
Channel+ Channel↓
Channel- Channel↑
Live
Play
Up Up
Down Down
Left Left
Right Right
OK Select
Menu Main Menu
Back Cancel
Play/Pause Play/Pause
>> Fast Forward
<< Rewind
EPG EPG
Rec Record
Timer
Open
Info OSD Info
A/B
Audio Switch Audio
Subs
List Channel List
Mon
Full Screen

Enter
38
 myTeVii & MCE remote control keys definition

Key Name Default Action Live Mode Play Mode OSD MCE Mode
Mute Mute Mute Mute
Power Exit Shut Down Shut Down
1 1 1
2 2 2
3 3 3
4 4 4
5 5 5
6 6 6
7 7 7
8 8 8
9 9 9
0 0 0
Recall Previous Channel Event Into
Fav OSD Favorites OSD File List
Vol+ Vol+ Vol+ Vol+
Vol- Vol- Vol- Vol-
Channel+ Next File Channel+
Channel- Previuos File Channel-
Live Live Mode
Play Play Mode
Up Channel+ Up Up
Down Channel- Down Down
Left Play Speed+ Left Left
Right Play Speed- Right Right
OK Select OK
Menu OSD Menu
Back Cancel Back
Play/Pause Play/Pause Add To scheduler(Watch) Play/Pause
>> Fast Forward Fast Forward
<< Rewind Rewind
EPG EPG EPG
Rec Record Add To scheduler(Record) Record
Timer Sleep Timer
Open Open file
Info OSD Info Program Info
A/B Audio A/B/AB
Audio Switch Audio Switch Audio
Subs Subtitles on/off
List Channel List File List
Mon Next Monitor
Full Screen Full Screen Full Screen
Preset 1 Satellite View Video Library
Preset 2 Provider View Music Library
Preset 3 Transponder View Radio
Preset 4 Favorites View Picture Library
MCE Home
Enter Preset 5 All Channels 39
Ch4. Trouble shooting

My device can’t work correctly.

ANS:
1. Please unplug device from PC and re-insert to another USB port / PCI / PCIe slot
again.
2. Please check device management and see if there is any exclamation mark or not.
3. Please re-install latest driver again.

Windows can’t recognize satellite card hardware correctly.

ANS: You may switch to a different PCI / PCIe slot and try again. Or you may try to clean
golden finger and try again.

Video can be played but Audio failed.

ANS: Please check the sound card setting or the volume setting.

Why my EPG, Teletext and subtitle cannot be shown?

ANS: At some areas, the broadcasters do not provide these services. Please contact your
broadcaster for further information.

Why I can not lock any channel?

ANS:
Please check whether the dish points at the satellite you wish to watch.
Please check the cable between device and the dish are well connected.
Please note that the cable should be connected to "LNB In" F-connector of the card.
Check the settings of satellite; for example, LNB frequency is for C band or Ku band.
Please re-insert the device to another PCI / PCIe slot or USB port again.

Why my S480/S482 can not lock some channels?

ANS: S480/S482 is a dual tuner model and requires more power to drive both tuner devices.
Some old versions mainboard might not supply enough power so tuner cannot lock
all channels completely. We suggest you to take power from a 4-pin connector inside
your desktop PC (same as the one used for Floppy HDD) and connect it to the 4-pin
jack on the upright corner of S480/S482 (shown as the photo below).
40
Caution!!
Connect 4-pin power jack carefully. It must be connected at right direction, please
follow the instruction diagram below. It will damage S480/S482 if connected incorrectly.

(S480/S482 4-pin power connection diagram）

41
Others:
How to find Device Manager on Windows Vista/XP/7?
Step 1 : Click “Start” on the bottom-left corner. (Windows logo on Vista/ XP / 7)
Step 2 : Click right-button on ”Computer” (”My Computer” on Windows XP)
Step 3 : Click on ”Manage” (”Device Manager” on Windows XP)

Step 4 : Double click ”Device Manager”

Step 5 : Double click ”Sound, video and game controllers”
Step 6 : Check whether the driver of TV tuner has been properly installed. If a yellow
Question Mark or Exclamation mark appears, the driver is not well installed.
Please re-install.

42
 How to check Device Manager on Windows 8?

Step 1 : Click Desktop on Start page

Step 2 : Click File Explorer

Step 3 : Right-click on Computer and choose Manage to enter Computer Management

43
 ep 4 : Clickk Device manager
Ste m in Computer Managem ment
Ste
ep 5 : Clickk “Sound, video
v and game
g conttrollers”, then click Te
eVii producct to get pro
oduct
inforrmation.
Ste
ep 6 : Checck whether the driver of TV tune
er has been n properly in
nstalled. If a yellow
quesstion mark or Exclamaation mark appears, the t driver iss not well in
nstalled.
Please re-instaall.

44