Accelalpha

(v2)

OTM-GTM Practice Exam

Name: Divya Donthula
Score: 99%
Passmark: 90%
Attempted: Friday, December 16, 2022
Attempt Number: 1
Time Taken: 01:03:48
Locked: No
Marking Required: No

Question Type: Correct Actual Answer Answer Given

Multiple Choice What is the
difference between
a BUY Shipment
and a SELL
Shipment?
BUY Shipments are
tendered to third party
carries, and SELL
Weight: 1
Shipments are tendered
to a company¶s private
Fleet.
BUY Shipments are
created by Planners in a
Company domain for
their own shipments,
and SELL Shipments
are created by Planners
in a 3PL COMPANY
domain for their clients¶
shipments.
BUY Shipments are BUY Shipments are
created when you wish created when you wish
to purchase services, to purchase services,
and SELL Shipments and SELL Shipments
are created when you are created when you
wish to charge a wish to charge a
customer for services. customer for services.
BUY Shipments are
created for inbound
(vendor Purchase
Orders) shipments, and
SELL Shipments are
created for outbound
(company Sales
Orders) shipments.

Prepared by Litmos at 12/16/2022 3:20:04 AM 1 of 50

Question Type: Correct Actual Answer Answer Given
Multiple Choice You want to run a
Bulk plan ,order
releases are in the
statuses listed
below identify
which order
releases the bulk
plan will be able to
plan
PLANNING_EXECUTE PLANNING_EXECUTE
Weight: 1
D PARTIAL D PARTIAL
PLANNING_FINAL
PLANNING_PLANNING
HOLD
PLANNING_PLANNED
_FINAL
PLANNING_CREDIT_H
OLD
Question Type: Correct Actual Answer Answer Given
Multiple Choice How can you group
items with similar
characteristics in
OTM?
Weight: 1 Use Equipment Class.

Use Commodity. Use Commodity.

Use NMFC Class.

Use Equipment Group
Profile.
Question Type: Correct Actual Answer Answer Given
Multiple Choice Which action can
you use if you want
Global Trade
Management (GTM)
to automatically
determine and
assign a license to a
Trade Transaction?
Assign License Show
Weight: 1
Options
Reevaluate License

Determine License

Assign License Assign License

Prepared by Litmos at 12/16/2022 3:20:05 AM 2 of 50

Question Type: Correct Actual Answer Answer Given
Multiple Choice You are writing an
order release agent
and need to listen
for an order
modification event
triggered by an
integration update
to the order release.
What is the impact
to the agent
process if you set
the "before persist"
flag on the ORDER -
MODIFIED event?
OTM will persist the
new data immediately
after the agent is
Weight: 1
triggered and then
perform the agent
actions.
OTM stages the new
data but will not perform
the agent actions if the
data is not persisted
properly.
OTM will perform the
agent actions but will
not persist any changes
to the object.
OTM will not persist the
new data but will
perform the agent
actions as long as they
do not require persisting
the new data.
OTM stages the new OTM stages the new
data, will perform the data, will perform the
agent actions, will not agent actions, will not
allow you to use certain allow you to use certain
actions. actions.
Question Type: Correct Actual Answer Answer Given
Multiple Choice While setting up a
transport handling
unit, which option
needs to be used
for defined mixed
(rainbow) pallets?
Weight: 1 At

In In

On

Max
Question Type: Incorrect Actual Answer Answer Given
Multiple Choice Select the two true
statements about
OTM Agents.
Agents can be Agents can be
configured to run configured to run
Weight: 1
multiple times on a multiple times on a
time-based schedule. time-based schedule.
Prepared by Litmos at 12/16/2022 3:20:05 AM 3 of 50
 Agents can be send Agents can be send
alerts when a condition alerts when a condition
has occurred, and then has occurred, and then
can also create or can also create or
change data objects. change data objects.
Agents can send alerts
when a condition has
occurred, but they
cannot create or change
data objects.
Agents "listen" for a
condition to occur.
Question Type: Correct Actual Answer Answer Given
Multiple Choice If you have just
installed OTM,
which domain
would not be
created by default?
Weight: 1 MASTER MASTER

GUEST

SERVPROV

BLUEPRINT
Question Type: Correct Actual Answer Answer Given
Multiple Choice Your customer
needs a new Buy
Shipment Search
Screen where users
do not have the
³Source Pier
Location´and
³Destination Pier
Location´fields.
How can this be
achieved?
Create Manager
Layout- Assign to
Screen Set-Assign to
Weight: 1
Menu Manager-Assign
to User via User Access
Manager.
Create New Screen Set,
Assign to Manager
Layout, Assign to Menu
Manager, Assign to
User via User Access
Manager.
Create New Manager
Layout, Assign to Menu
Manager, Assign to
User via Manage User
Access.
Create New Screen Set, Create New Screen Set,
Assign to Menu Assign to Menu
Manager, Assign to Manager, Assign to
User via Manage User User via Manage User
Access. Access.

Prepared by Litmos at 12/16/2022 3:20:05 AM 4 of 50

Question Type: Correct Actual Answer Answer Given
Multiple Choice Identify two correct
statements about
Contacts.
Contacts are people,
Weight: 1
but not systems.
Contacts are people or Contacts are people or
systems you want to systems you want to
send communications send communications
to. to.
Contacts are mandatory
on Location records.
Contacts can be Contacts can be
associated with associated with
Locations. Locations.
Question Type: Correct Actual Answer Answer Given
Multiple Choice At which three
levels does Match
Rules allow the
Invoice Matching to
occur?
Weight: 1 Shipment location level

Shipment level Shipment level

Order line level

Shipment Ship Unit line Shipment Ship Unit line
level level
Shipment Ship Unit Shipment Ship Unit
level level
Question Type: Correct Actual Answer Answer Given
Multiple Choice While setting up a
compliance rule,
your client finds out
that certain
information is
required and there
is no such field in
the GTM UI. Identify
two ways in which
your client can
capture this
information
effectively in GTM.

Weight: 1 Planning Parameter

Screen Set

Remarks Remarks

User-defined Code User-defined Code

Parties

Prepared by Litmos at 12/16/2022 3:20:05 AM 5 of 50

Question Type: Correct Actual Answer Answer Given
Multiple Choice Which of the
following methods
will allow you to
combine
transaction lines
with matching HTS
codes when
creating a
declaration?
Set up a Declaration
Weight: 1 type profile for your
declaration
Set up an aggregation
constraint set in your
logic configuration
Set up a grouping Set up a grouping
constraint set in your constraint set in your
logic configuration logic configuration
Set up data
configuration in your
logic configuration
Question Type: Correct Actual Answer Answer Given
Multiple Choice Which three
statements are true
when configuring
allocation rules for
OTM Freight
Payment?
The allocation rules in The allocation rules in
the profile can be the profile can be
Weight: 1
sequenced in the sequenced in the
allocation rule profile. allocation rule profile.
OTM uses the first OTM uses the first
allocation rule that allocation rule that
applies. applies.
For a service provider,
one can assign one
allocation rule based on
the planned cost and
another based on the
actual cost.
Allocation rules need to Allocation rules need to
be set up before the be set up before the
allocation rule profiles. allocation rule profiles.
One cannot use the
same rule in more than
one allocation rule
profile.
Question Type: Correct Actual Answer Answer Given
Multiple Choice What are Smart
Links used for in
OTM?
Weight: 1 to view related objects to view related objects
to create linkages for
the User IDs from one
child domain to an
equal child domain

Prepared by Litmos at 12/16/2022 3:20:05 AM 6 of 50

 to create linkages for
the users IDs from one
child domain to its
parent domain, or the
public domain
to access the Actions
menu
to navigate from one
Group on the User
Menu to another Group,
without closing the
active w
Question Type: Correct Actual Answer Answer Given
Multiple Choice Which three
statements are true
regarding tracking
events?
Planners can enter Planners can enter
Weight: 1
tracking events. tracking events.
Service Providers can Service Providers can
enter tracking events. enter tracking events.
Tracking events can be Tracking events can be
created via Integration. created via Integration.
Tracking events can
only reflect pickup and
delivery.
Tracking events can
only be used with
Truckload shipments.
Tracking events always
reflect real time
tracking.
Question Type: Correct Actual Answer Answer Given
Multiple Choice Which output option
from the below is
available for
exporting data
using the CSV
Export function?
Weight: 1 Browser Browser
a file on your database
server
MS Excel

Notepad
Question Type: Correct Actual Answer Answer Given
Multiple Choice After creating a
report, which step
must occur in order
to register the
report for execution
within Oracle
Transportation
Management?
Make a directory
Weight: 1 "BIPCatalogUtil" under
[BI Publisher Home]
Create a new Data
Source pointing to the
BI Publisher database.
Prepared by Litmos at 12/16/2022 3:20:05 AM 7 of 50
 Select the Report Select the Report
System and specify the System and specify the
Report Path. Report Path.
Create a new Data
Source pointing to the
OTM database.
Question Type: Correct Actual Answer Answer Given
Multiple Choice Your client has the
following
requirements:

1. Order Releases
will be obtained
using integration.
2. Multiple Order
Releases will be
bulk planned into
shipment.
3. The shipment
should be screened
for export
compliance to
check if a license is
required and
denied-party
screening.

Which option will

meet the
requirements?

The bulk plan logic

should be modified to
Weight: 1 screen the Order
Release just before the
shipment is created.
The shipment can be
directly screened
without creating a Trade
Transaction.
A Trade Transaction
has to be created using
an Order Release
before the shipment is
created. The Trade
Transaction should be
screened.
A Trade Transaction A Trade Transaction
can be directly created can be directly created
using the shipment and using the shipment and
can go through export can go through export
compliance screening compliance screening
and denied party and denied party
screening. screening.
Question Type: Correct Actual Answer Answer Given
Multiple Choice What two types of
data should you
considering porting
by the CSV import
utility in OTM?
Weight: 1 Static Data Static Data

Prepared by Litmos at 12/16/2022 3:20:05 AM 8 of 50

 Rates Rates

EDI documents

Transactional data
Shipment Status
Updates
Question Type: Correct Actual Answer Answer Given
Multiple Choice You are creating a
Shipment Agent and
you need to Raise
an Event to trigger
another agent for
the Order Release
that is linked to the
shipment. Which
agent action do you
have to use?
RAISE RELEASE
Weight: 1
EVENT
FOR EACH FOR EACH

SCHEDULE EVENT

FOR

RAISE EVENT
Question Type: Correct Actual Answer Answer Given
Multiple Choice Enhanced support
for trade agreement
qualification allows
you to download the
Rules of Origin
content from third-
party content
providers. Each
trade agreement has
its own set of rules,
which include
product-specific
rules and base
rules. Which power
data type is used to
define rules that are
applied at the
classification code
level or across a
range of
classification
codes?
Rules of Origin Rule
Weight: 1
Types
Rules of Origins

Trade Agreements
Rules of Origin Product Rules of Origin Product
Specific Rules Specific Rules
Rules of Origin Rule
Codes

Prepared by Litmos at 12/16/2022 3:20:06 AM 9 of 50

Question Type: Correct Actual Answer Answer Given
Multiple Choice Your customer
needs a new Buy
Shipment Search
Screen where users
do not have the
³Source Pier
Location´and
³Destination Pier
Location´fields.
How can this be
achieved?
Create Manager
Layout- Assign to
Screen Set-Assign to
Weight: 1
Menu Manager-Assign
to User via User Access
Manager.
Create New Screen Set,
Assign to Manager
Layout, Assign to Menu
Manager, Assign to
User via User Access
Manager.
Create New Manager
Layout, Assign to Menu
Manager, Assign to
User via Manage User
Access.
Create New Screen Set, Create New Screen Set,
Assign to Menu Assign to Menu
Manager, Assign to Manager, Assign to
User via Manage User User via Manage User
Access. Access.
Question Type: Correct Actual Answer Answer Given
Multiple Choice Which three
statements are true
when setting up
Match Rules for
Freight Payment in
OTM?
You need to specify at You need to specify at
least one shipment least one shipment
Weight: 1
reference number reference number
qualifier to match to. qualifier to match to.
You could specify You could specify
several shipment several shipment
reference values to reference values to
match to. match to.
BM or Bill Of Lading is a
mandatory shipment
reference number
qualifier to match to.
The match rule will
apply to all invoices,
unless only certain
service providers are
specified on the match
rule.
The matching rule could The matching rule could
be different for different be different for different
service providers. service providers.

Prepared by Litmos at 12/16/2022 3:20:06 AM 10 of 50

Question Type: Correct Actual Answer Answer Given
Multiple Choice Select the three
businesses objects
that can be manage
using the Fleet
Management
module.
Weight: 1 Driver payroll
Driver time off, sick
time, vacations, etc.
Fleet power units Fleet power units

Fleet equipment Fleet equipment

Driver work hours Driver work hours

Question Type: Correct Actual Answer Answer Given
Multiple Choice You are writing an
agent to be
triggered when an
Order Release
Update is received
via integration. You
would like the agent
to check if the Order
Release is on a
shipment and if it is,
you want OTM to
only update the
Order Release.
Which option will
achieve this?
You can use an agent
saved condition to
identify OR ON
Weight: 1 SHIPMENT and use the
ORDER RELEASE -
MOD - FULL IMPACT
action.
You can use an agent You can use an agent
saved condition to saved condition to
identify OR ON identify OR ON
SHIPMENT and use the SHIPMENT and use the
ORDER RELEASE - ORDER RELEASE -
MOD - FUTURE MOD - FUTURE
PROCESSING agent PROCESSING agent
action. action.
You can use an agent
saved condition to
identify OR ON
SHIPMENT WITH
RESOURCES
TENDERED/SECURED
and use the ORDER
RELEASE - MOD - NO
PROCESSING agent
action.
You can use an agent
saved condition OR ON
SHIPMENT and use the
ORDER RELEASE -
MOD - NO
PROCESSING action.

Prepared by Litmos at 12/16/2022 3:20:06 AM 11 of 50

 You can use an agent
saved condition to
identify OR ON
SHIPMENT and use the
ORDER RELEASE -
MOD - NO
PROCESSING action.
Question Type: Correct Actual Answer Answer Given
Multiple Choice You are configuring
a Migration Project
to move a set of
Screen Sets and a
set of EDI Status
Codes from your
OTM test
environment to your
Production
environment. Which
Screen Set IDs will
you be required to
add to your
Migration Project?
BS_STATUS_CODE,
Weight: 1 SCREEN_SET and
MANAGER_LAYOUT
STATUS_CODE and
FINDER_SET
BS_STATUS_CODE BS_STATUS_CODE
and FINDER_SET and FINDER_SET
STATUS_CODE,
FINDER_SET and
MANAGER_LAYOUT
STATUS_CODE and
SCREEN_SET
Question Type: Correct Actual Answer Answer Given
Multiple Choice The recalculation
process in Landed
Cost Simulator will
______.
Calculate charge values
based on the Formula
Weight: 1 Rule Set Group defined
in Logic Configuration
for the lock charges.
Reassign charges
based on the Value Set
Rule Set Group defined
in Logic Configuration.
Calculate charge values Calculate charge values
based on the Formula based on the Formula
Rule Set Group defined Rule Set Group defined
in Logic Configuration in Logic Configuration
for the unlock charges for the unlock charges
Calculate charge values
based on the Formula
Rule Set Group defined
in Logic Configuration
for the lock and unlock
charges

Prepared by Litmos at 12/16/2022 3:20:06 AM 12 of 50

Question Type: Correct Actual Answer Answer Given
Multiple Choice Which is the
technology that
GTM < > Descartes
integration uses?
Weight: 1 Oracle Advance Queue

FTP

database link

httppost httppost

web service
Question Type: Correct Actual Answer Answer Given
Multiple Choice When reviewing
Invoices in the OTM
Payment Invoice
Manager, you have
the option of
selecting the "Pass
Through" checkbox.
Identify the correct
statement about
what the "Pass
Through" checkbox
does.
It allows for more
shipment cost lines to
Weight: 1
be added to the
associated shipment.
It allows for the invoices
from other shipments to
be consolidated onto
this invoice.
It allows for more
invoice amounts to be
allocated to the invoice.
It allows the invoice to It allows the invoice to
be paid without be paid without
consideration for any consideration for any
invoice matching rules. invoice matching rules.
Question Type: Correct Actual Answer Answer Given
Multiple Choice Which four key
components will
you configure to
import rates in
OTM? (Choose
four.)
Weight: 1 Rate Offering Rate Offering

Accessorial
Rate Quality Rate Quality

Rate Service Rate Service

Itinerary

Rate Record Rate Record

Lanes

Prepared by Litmos at 12/16/2022 3:20:06 AM 13 of 50

Question Type: Correct Actual Answer Answer Given
Multiple Choice Your client is
running into the
following issue:

The client had

added a few
countries to a
region by using
CSV upload. This
region is used in
compliance rule for
Sanctions
Screening. The
client also modified
the compliance rule.
The screening for
the parties involved
in BILL TO is
happening for the
newly added
countries, but not
for the SHIP TO
countries.

Identify two reasons

for this.

The region is not The region is not

Weight: 1
formulated. formulated.
A separate compliance A separate compliance
rule is required for each rule is required for each
involved party qualifier involved party qualifier
BILL TO and SHIP TO BILL TO and SHIP TO
to be screened, so the to be screened, so the
compliance rule may be compliance rule may be
missing. missing.
For such a requirement,
a Restricted Parties List
for the sanctioned
countries is required in
addition to the region
requirement, which is
missing.
The compliance rule
may not be properly set
up.
Question Type: Correct Actual Answer Answer Given
Multiple Choice Which three fields
on the user
manager screen
need to be
populated to
provide a new user
access to GTI?
Weight: 1 Account Policy ID

User Role ID User Role ID

Document use Profile

Business Intelligence Business Intelligence
Role ID Role ID

Prepared by Litmos at 12/16/2022 3:20:06 AM 14 of 50

 Business Intelligence Business Intelligence
Application ID Application ID
Question Type: Correct Actual Answer Answer Given
Multiple Choice How would you
create an
association in OTM
if you want to
associate a Match
Rule to a specific
Service Provider
(carrier)?
Create the Rule, then
Weight: 1 assign the Rule to the
Service Provider.
Create the Rule, then
assign the Service
Provider to the Rule.
Create the Rule, assign
the Rule to an
appropriate Rule Profile,
then assign the Service
Provider to the Rule
Profile.
Create the Rule, assign Create the Rule, assign
the Rule to an the Rule to an
appropriate Rule Profile, appropriate Rule Profile,
then assign the Rule then assign the Rule
Profile to the Service Profile to the Service
Provider. Provider.
Question Type: Correct Actual Answer Answer Given
Multiple Choice Select the three
correct statements
regarding Freight
Settlement in OTM.
Invoice checks may be
Weight: 1
printed out of OTM.
Rules for matching, Rules for matching,
approval, and allocation approval, and allocation
are the cornerstones of are the cornerstones of
automation in Freight automation in Freight
Settlement. Settlement.
Freight Settlement in Freight Settlement in
OTM may be used to OTM may be used to
pay invoices to carriers pay invoices to carriers
as well as bill customers as well as bill customers
for freight. for freight.
Invoices in OTM must
be tied to a shipment.
Freight Invoices may be Freight Invoices may be
created within OTM or created within OTM or
interfaced from an interfaced from an
external system. external system.

Prepared by Litmos at 12/16/2022 3:20:06 AM 15 of 50

Question Type: Correct Actual Answer Answer Given
Multiple Choice When configuring
Power Units for a
Fleet, there is
parameter named
"Power Unit Type
ID". Select the three
statements that are
true about this
parameter.
Power Unit Type ID is Power Unit Type ID is
used to group Power used to group Power
Units based on the Units based on the
Weight: 1 PHYSICAL attributes of PHYSICAL attributes of
the unit, for example, the unit, for example,
those containing those containing
sleeper cabs. sleeper cabs.
Power Unit Type ID is
not a required
parameter.
Power Unit Type ID is Power Unit Type ID is
used to group Power used to group Power
Units based on the Units based on the
GEOGRAPHICAL GEOGRAPHICAL
attributes of the unit, for attributes of the unit, for
example, the countries, example, the countries,
regions, states, or regions, states, or
provinces where is can provinces where is can
operate. operate.
Power Unit Type ID is a Power Unit Type ID is a
required parameter. required parameter.
Question Type: Correct Actual Answer Answer Given
Multiple Choice Your customer has
implemented OTM
and has a
requirement to have
a selected menu to
be displayed
separately. How
should you assign
this to a user?
Assign it in User Role
Weight: 1
ID.
Assign it via Manage Assign it via Manage
User Access. User Access.
Assign it in User
Preference and assign
this preference to User.
It is a customization that
OTM does not support.

Prepared by Litmos at 12/16/2022 3:20:06 AM 16 of 50

Question Type: Correct Actual Answer Answer Given
Multiple Choice A new Business
Monitor with an
"OR_NEW" ID was
created to view
Order Releases with
the Status
"Planning_New".
While viewing the
Business Monitor, it
was showing the
Shipment result
page instead of the
Order Release
result page.

What should have

been the Business
Monitor
configuration?

The Business Monitor

Query ID and the Saved
Weight: 1
Query ID Object should
be Order Release.
The Business Monitor
Saved Query ID and the
Screen Set ID Object
should be Order
Release.
The Business Monitor The Business Monitor
Query ID, Saved Query Query ID, Saved Query
ID, and Screen Set ID ID, and Screen Set ID
Object should be Order Object should be Order
Release. Release.
The Business Monitor
Query ID and Screen
Set ID Object should be
Order Release.
Question Type: Correct Actual Answer Answer Given
Multiple Choice Which of the
following are true
when you are
configuring General
Ledger (GL) key
components?
The key component is a The key component is a
basic building block that basic building block that
Weight: 1
is used to assign GL is used to assign GL
codes. codes.
We can define a new
key component type to
be used in the key
component.
One can configure more
than one key
component per domain.
The key component can The key component can
be defined for be defined for
shipments, order shipments, order
releases, and order releases, and order
bases. bases.

Prepared by Litmos at 12/16/2022 3:20:06 AM 17 of 50

 The key components The key components
are used in the GL are used in the GL
lookup key. lookup key.
Question Type: Correct Actual Answer Answer Given
Multiple Choice 10. Given the
information:
Which two options
are correct for
Service Preference
configuration?
(Choose two.)

If the Data Version ID is

not specified, then the
system will throw an
Weight: 1
error during screening
that Data Version ID
needs to be specified
If the Data Version ID is If the Data Version ID is
not specified and if not specified and if
there is a Restricted there is a Restricted
Parties List with a Data Parties List with a Data
Version with the Version with the
³Current´flag set, it will ³Current´flag set, it will
be used for screening be used for screening
It is not mandatory to It is not mandatory to
specify Agency Code specify Agency Code
Exclude Words is used
to specify words to
exclude when ONLY
³Dice´Match Engine is
used.
At the most sixty-four
words can be specified
in Exclude Words
Question Type: Correct Actual Answer Answer Given
Multiple Choice Which two can be
planned into
shipments?
Weight: 1 Order Bases

Ship Unit Lines

Order Movements Order Movements

Order Releases Order Releases

Ship Units
Question Type: Correct Actual Answer Answer Given
Multiple Choice What is the
minimum number of
Legs required on a
Multi-Leg Itinerary?
One for each
Weight: 1 Transportation Mode
required on the Itinerary
Zero

Two Two

One

Three

Prepared by Litmos at 12/16/2022 3:20:07 AM 18 of 50

Question Type: Correct Actual Answer Answer Given
Multiple Choice Which three of the
following are true
about Rate
Preferences in
OTM?
To have non-preferred
rates included in case
the preferred rates are
not always selected, the
Weight: 1
parameter USE RATE
PREFERENCE should
be set to '1. Preferred
Only'.
OTM considers only OTM considers only
preferred rates for preferred rates for
transport modes with transport modes with
preferred rates defined preferred rates defined
if USE RATE if USE RATE
PREFERENCE is set to PREFERENCE is set to
'1. Preferred Only'. '1. Preferred Only'.
Rate Preferences are Rate Preferences are
considered only when considered only when
building shipments if the building shipments if the
parameter USE RATE parameter USE RATE
PREFERENCE is PREFERENCE is
configured. configured.
OTM considers all OTM considers all
applicable rates for applicable rates for
transport modes where transport modes where
a preferred rate has not a preferred rate has not
been defined. been defined.
Question Type: Correct Actual Answer Answer Given
Multiple Choice Which two options
must be defined for
shipment planning?
(Choose two.)
Weight: 1 Equipment Type

Equipment Class
Equipment Group Equipment Group
Profile Profile
Equipment

Equipment Group Equipment Group

Question Type: Correct Actual Answer Answer Given
Multiple Choice How should you set
up permissions for
users to access
data in other
domains?
Assign User Preference
Weight: 1 via Manage User
access.
Assign Access Control
List in User Role.
Use domain Grants. Use domain Grants.
Use Insert User Role in
VPD Profile.

Prepared by Litmos at 12/16/2022 3:20:07 AM 19 of 50

Question Type: Correct Actual Answer Answer Given
Multiple Choice Which statement
explains the
meaning of the term
³foreign key´as it
relates to the OTM
Data Dictionary?
Foreign key objects Foreign key objects
reference Primary key reference Primary key
objects, therefore tables objects, therefore tables
Weight: 1 containing Foreign keys containing Foreign keys
must be loaded after must be loaded after
tables containing tables containing
Primary key objects. Primary key objects.
Foreign key identifies
objects in the Location
tables.
Foreign key refers to
data objects that are
stored in a domain other
than the PUBLIC
domain.
Foreign key objects are
referenced by Primary
key objects, therefore
tables containing
Primary keys must be
loaded after tables
containing Foreign key
objects.
Question Type: Correct Actual Answer Answer Given
Multiple Choice Which business
object do you use to
set up the details of
the classification
data that you want
to download and
configure how it is
mapped from the
content provider's
data to the Global
Trade Management
(GTM) data
structure?
Product Classification
Weight: 1
Category
Content Source

External System

Data Load Type Data Load Type

Question Type: Correct Actual Answer Answer Given
Multiple Choice Which three options
are supported in
Oracle GTM when
creating a
Declaration?
One Trade Transaction One Trade Transaction
Weight: 1
to many Declarations to many Declarations
Many Trade Many Trade
Transactions to one Transactions to one
Declaration Declaration

Prepared by Litmos at 12/16/2022 3:20:07 AM 20 of 50

 One Order Release to
one Declaration
One Trade Transaction One Trade Transaction
to one Declaration to one Declaration
One Order Release to
many Declarations
Question Type: Correct Actual Answer Answer Given
Multiple Choice Identify the object in
which Saved query
cannot be used.
Weight: 1 Business Monitors

Finders (Search pages)

Reports Reports

Automation Agents
Question Type: Correct Actual Answer Answer Given
Multiple Choice You've executed a
CSV upload in
which you have
modified some
existing records,
and created some
new records. There
were no errors
during the upload.
However, OTM is
still retrieving only
the old data, not the
new data that was
just uploaded.

Select the action

that you can take to
address this.

You must reboot the

database server in
Weight: 1
order to commit the
changes.
Rerun the upload, this
time making sure that
you specify the "dd"
command.
You should clear the You should clear the
OTM cache. OTM cache.
Rerun the upload, this
time making sure that
you specify the "uu"
command.
Rerun the upload, this
time making sure that
you specify the "ii"
command.

Prepared by Litmos at 12/16/2022 3:20:07 AM 21 of 50

Question Type: Correct Actual Answer Answer Given
Multiple Choice Which three
methods can be
used to convert
currency rates used
by Oracle
Transportation
Management
(OTM)?
Set the value for the Set the value for the
glog.currency.base glog.currency.base
Weight: 1 property to your property to your
currency storage currency storage
default. default.
Write an API to bring in
rates from an external
source.
Set the exchange rates Set the exchange rates
on Rate Records in on Rate Records in
OTM. OTM.
Update exchange rates Update exchange rates
manually using a CSV manually using a CSV
file. file.
Question Type: Correct Actual Answer Answer Given
Multiple Choice Which three options
are available after a
document has been
assigned to a
Customs
transaction as a
standard
document? (Choose
three.)
Upload the document
Weight: 1
content.
View the document View the document
content. content.
Validate the document Validate the document
content. content.
Generate the document Generate the document
content. content.
Edit the document.
Question Type: Correct Actual Answer Answer Given
Multiple Choice While reviewing
Invoices in OTM,
you want to search
for Invoices based
on the ³Financial
Consolidation
Type´Identify two
Types that you can
choose from.
Weight: 1 SELL

STANDARD STANDARD

PARENT PARENT

SYSTEM

BUY

Prepared by Litmos at 12/16/2022 3:20:07 AM 22 of 50

Question Type: Correct Actual Answer Answer Given
Multiple Choice Your client wants to
screen a Trade
Transaction with a
ship to country of
Syria. Which
functionality in GTM
would enable the
client to meet this
requirement?
Restricted Party
Weight: 1
Screening
Product Classification

License Screening

Sanctions Screening Sanctions Screening

Question Type: Correct Actual Answer Answer Given
Multiple Choice You have created
the following
Workflow Agent in
your OTM test
environment and
you want to move it
to your OTM
production
environment:

Agent Name:
SHIPMENT NOTIFY
Event: LATE
SHIPMENT (New
Custom Event)
Saved Condition:
SHIPMENT IS
INBOUND (New
saved condition)
Actions:
IF SHIPMENT
STATUS IS NOT
CANCELLED (If
uses a new Saved
Condition)
SET INTERNAL
STATUS:
ENROUTE_DELAYE
D
ENDIF

Which Screen Set

ID's do you have to
use in your
Migration Project?

AGENT,
AGENT_EVENT,
Weight: 1
SAVED_CONDITION_
QUERY
AGENT,
CUSTOM_EVENT,
SAVED_CONDITION,
SAVED QUERY
Prepared by Litmos at 12/16/2022 3:20:07 AM 23 of 50
 AGENT,
AGENT_EVENT,
SAVED_CONDITION,
SAVED QUERY
AGENT, EVENT,
SAVED_CONDITION,
SAVED QUERY
AGENT,
CUSTOM_EVENT,
SAVED_CONDITION
AGENT, AGENT,
AGENT_EVENT, AGENT_EVENT,
SAVED_CONDITION, SAVED_CONDITION,
SAVED_QUERY SAVED_QUERY
Question Type: Correct Actual Answer Answer Given
Multiple Choice Which statement is
false about the User
Role?
You can assign multiple
Weight: 1
roles to a master role.
User Role controls data
visibility via a private
database (VPD).
Only one role can be Only one role can be
assigned to one User. assigned to one User.
User Role controls data
visibility via function
security (Level).
Question Type: Correct Actual Answer Answer Given
Multiple Choice In order to be
considered for the
Match Pay process,
what three of the
following SECURE
RESOURCES
statuses must a
shipment be
assigned?
Weight: 1 BOL BOL

Accepted Accepted

Verified

Pickup Notification Pickup Notification

Question Type: Correct Actual Answer Answer Given
Multiple Choice If an agent is
associated with a
shipment, and the
agent also acts
upon the order
releases that are on
that shipment,
which definition is
an example of this?
Weight: 1 Relationship Proofing

Agent Object Linkage

Data Type Association Data Type Association

Referential Integrity

Prepared by Litmos at 12/16/2022 3:20:08 AM 24 of 50

 Parent-Child
Relationship
Question Type: Correct Actual Answer Answer Given
Multiple Choice What should you
enable to generate
an invoice
automatically for a
shipment serviced
by a carrier?
Weight: 1 Self-billing approval rule

Invoice approval rule

Autopay for the carrier Autopay for the carrier

Match rule profile

Question Type: Correct Actual Answer Answer Given
Multiple Choice In the process of
"Adjust shipment
cost scenario," you
select "reversing
and adjusting"
Shipment cost.
What will be
performed by OTM?
The system gives the
Weight: 1 user an option to update
the amount.
The system reverses a
cost by creating a new
cost with a negative
amount that matches
the amount of the
original cost.
The system creates a The system creates a
new cost that negates new cost that negates
the original cost. Then it the original cost. Then it
creates another new creates another new
cost with the new cost cost with the new cost
value. value.
The system takes the
original cost and adds
or subtracts an amount
to it to create the new
cost.
Question Type: Correct Actual Answer Answer Given
Multiple Choice Which of the
following Rate
components defines
how transportation
costs will be
calculated for a per
mile Rate?
Weight: 1 Rate Lane

Rate Record

Rate Distance Rate Distance

Rate Service

Prepared by Litmos at 12/16/2022 3:20:08 AM 25 of 50

Question Type: Correct Actual Answer Answer Given
Multiple Choice In what two ways
can you enable auto
approval for an
Invoice?
Invoice Approval Rule Invoice Approval Rule
Weight: 1
Profile Profile
Match pay with Match pay with
automation agent automation agent
Enabling auto pay on
carrier
Invoice Creation
recurring Process for
Carrier
Question Type: Correct Actual Answer Answer Given
Multiple Choice Which tender
method would you
use to call a Service
Provider on the
phone in order to
notify them that you
have tendered a
shipment to them?
Weight: 1 Manual Manual

Fax

None

Message Center
Question Type: Correct Actual Answer Answer Given
Multiple Choice In the Modeling
Scenario UI, which
three values are
available in the
Modeling Scenario
Data Rule section?
(Choose three.)
Weight: 1 Operand

Saves query filter Saves query filter

Domain name
Date rule instance ID Date rule instance ID

Sequence number Sequence number

Question Type: Correct Actual Answer Answer Given
Multiple Choice Which rate
component defines
how transportation
time will be
calculated for the
Rate?
Weight: 1 Rate Lane

Rate Service Rate Service

Rate Distance

Rate Offering

Rate Record

Prepared by Litmos at 12/16/2022 3:20:08 AM 26 of 50

Question Type: Correct Actual Answer Answer Given
Multiple Choice How would you
create an
association in OTM
if you want to
associate a Match
Rule to a specific
Service Provider
(carrier)?
Create the Rule, assign
the Rule to an
appropriate Rule Profile,
Weight: 1
then assign the Service
Provider to the Rule
Profile.
Create the Rule, assign Create the Rule, assign
the Rule to an the Rule to an
appropriate Rule Profile, appropriate Rule Profile,
then assign the Rule then assign the Rule
Profile to the Service Profile to the Service
Provider. Provider.
Create the Rule, then
assign the Rule to the
Service Provider.
Create the Rule, then
assign the Service
Provider to the Rule.
Question Type: Correct Actual Answer Answer Given
Multiple Choice Which option
represents Original
Invoice Cost field at
Shipment?
The initial invoice The initial invoice
Weight: 1 amount received from amount received from
the carrier. the carrier.
Total Approved Cost on
a sell Shipment.
Total Actual Cost minus
the rebate amount as
defined in the
Secondary Charge
Rules.
Contains the initial
invoice amount adjusted
by any additional
charges or invoices that
the carrier later sent to
you.
Question Type: Correct Actual Answer Answer Given
Multiple Choice Which two
statements are true
with respect to
userID and domain
relationship, during
a standard OTM
installation?
The GUEST userID is
Weight: 1 created in the PUBLIC
domain.
The GUEST userID is
created in the
SERVPROV domain.

Prepared by Litmos at 12/16/2022 3:20:08 AM 27 of 50

 The ADMIN userID is The ADMIN userID is
created in the DBA created in the DBA
domain. domain.
The ADMIN userID is The ADMIN userID is
created in the GUEST created in the GUEST
domain. domain.
The DEFAULT userID is
created in the ADMIN
domain.
Question Type: Correct Actual Answer Answer Given
Multiple Choice After executing the
Approve Multiple
Invoices function,
Oracle
Transportation
Management
displays an
Approve Invoice
results page. Which
four invoice values
are displayed on
this results page?
(Choose four)
Weight: 1 Service Provider ID

Approval Status Approval Status

Invoice ID Invoice ID

Shipment ID

Voucher ID Voucher ID

Amount to Pay Amount to Pay

Question Type: Correct Actual Answer Answer Given
Multiple Choice Which object, when
added to an
Advanced Layout,
will define the data
that is seen when
the user accesses
the advanced
layout?
Weight: 1 Adding a Table Adding a Table

Adding a Menu

Adding a Panel Splitter

Adding a Screen Set

Question Type: Correct Actual Answer Answer Given
Multiple Choice Which two
statements are true
about authority
configuration in
Global Trade
Management
(GTM)? (Choose
two.)
Authority configuration Authority configuration
involves defining the involves defining the
Weight: 1
Authority ID, Name, and Authority ID, Name, and
Description. Description.

Prepared by Litmos at 12/16/2022 3:20:08 AM 28 of 50

 An authority has to be
linked to a region by
using region
configuration
Authorities are Authorities are
regulatory agencies, regulatory agencies,
such as the US Bureau such as the US Bureau
of Industry and Security. of Industry and Security.
An authority has to be
defined in the PUBLIC
domain.
There can be only one
authority defined for a
domain in GTM.
Question Type: Correct Actual Answer Answer Given
Multiple Choice Assume that you
have made changes
to the Default
Parameter Set.
Which statement is
true?
In order to reset all the
changed settings back
to their original settings,
Weight: 1 select "Actions", then
"Utilities", and then "Set
Defaults" from the drop-
down menu.
In order to reset all the
changed settings back
to their original settings,
you should delete the
Parameter Set and
recreate it using the
Default as your
template.
Regardless of your user
role, you won't be able
to save the changes
within the Default
Parameter Set without
renaming it first.
In order to reset all the In order to reset all the
changed settings back changed settings back
to their original settings, to their original settings,
you should review them you should review them
on the screen and be on the screen and be
able to tell which ones able to tell which ones
have been changed, have been changed,
and what the default and what the default
settings were. settings were.
Question Type: Correct Actual Answer Answer Given
Multiple Choice What should you
select in the Date
Emphasis field of
the order release so
that the delivery
dates are set out to
infinity?
Weight: 1 DELV

NONE

BOTH
Prepared by Litmos at 12/16/2022 3:20:08 AM 29 of 50
 SHIP SHIP
Question Type: Correct Actual Answer Answer Given
Multiple Choice Identify three true
statements about
CSV import files.
OTM imports the data to
a database queue. You
must run the Integration
Weight: 1
Manager to refresh the
data tables from the
queue.
OTM imports the data OTM imports the data
directly into the OTM directly into the OTM
tables that you specify tables that you specify
in the CSV file. in the CSV file.
CSV files cannot be
imported into OTM; they
can only be exported
from OTM.
The ³iu´command is a The ³iu´command is a
valid command you can valid command you can
use when importing a use when importing a
CSV file into OTM. CSV file into OTM.
OTM allows you to OTM allows you to
import CSV files both import CSV files both
manually and manually and
automatically. automatically.
Question Type: Correct Actual Answer Answer Given
Multiple Choice What does enabling
"Restriction" on the
Agent Header
screen do?
It allows the user to set
whether the agent is
Weight: 1
active, inactive, or a
reference agent.
It allows the user to
restrict who can view or
edit the agent.
It allows the user to It allows the user to
restrict whether the restrict whether the
agent can be initiated agent can be initiated
by user actions, system by user actions, system
actions, or integration actions, or integration
actions. actions.
It allows the user to
restrict which OTM
objects can initiate the
agent.
Question Type: Correct Actual Answer Answer Given
Multiple Choice Which two
statements about
shipment statuses
are true? (Choose
two.)
ENROUTE_NOT ENROUTE_NOT
STARTED - indicates STARTED - indicates
that the shipment has that the shipment has
Weight: 1
not been picked up from not been picked up from
the initial pickup stop the initial pickup stop
yet. yet.

Prepared by Litmos at 12/16/2022 3:20:09 AM 30 of 50

 ENROUTE_DIVERTED
- indicates that the
shipment was delayed
in leaving the previous
location due to the late
pickup time, and will be
late arriving to the
destination location.
ENROUTE_DELAYED
±indicates that the
shipment was unable to
travel on the planned
route and has taken a
detour.
ENROUTE_ENROUTE ENROUTE_ENROUTE
- indicates that the - indicates that the
shipment is moving shipment is moving
from one location to from one location to
another. another.
ENROUTE_UNLOADE
D PARTIAL - indicates
that the shipment has
reached the final
destination and is in the
process of being
unloaded.
Question Type: Correct Actual Answer Answer Given
Multiple Choice Which are two ways
in which Milestones
differ from Agents?
Agents monitor for a Agents monitor for a
condition to occur, condition to occur,
Weight: 1 whereas Monitors only whereas Monitors only
start and stop based on start and stop based on
a time-based schedule. a time-based schedule.
Agents may be made
up of one or more
Milestones.
Milestones may be
made up of one or more
Agents.
Milestones may be both Milestones may be both
"reactive" (for example, "reactive" (for example,
they monitor for a they monitor for a
condition to occur) and condition to occur) and
"proactive" (for "proactive" (for
example, they can example, they can
initiate before, at, or a initiate before, at, or a
prescribed occurs.) prescribed occurs.)
Question Type: Correct Actual Answer Answer Given
Multiple Choice When a new Service
Provider is created,
OTM automatically
does which of the
following?
OTM associates the
Service Provider
calendar with the
Weight: 1
calendar of the
Corporation ID identified
during setup.

Prepared by Litmos at 12/16/2022 3:20:09 AM 31 of 50

 OTM assigns the
default Calendar
defined in the
Parameter Set.
OTM creates a OTM creates a
corresponding location, corresponding location,
with the location Role of with the location Role of
³CARRIER´ ³CARRIER´
OTM sends an email or
fax to the Service
Provider contact,
depending on the
contact¶s preferred
contact method.
Question Type: Correct Actual Answer Answer Given
Multiple Choice Which two
statements are true
about screen sets
and manager
layouts?
You can have a
background image by
Weight: 1 specifying the image in
the manager layout
Configuration
Using screen sets, you
can build if...then rules
and call different
manager layouts
Using the manager
layout, you can change
the actions on the
results page
Using screen sets, you Using screen sets, you
can change the sort can change the sort
order of columns order of columns
Using the manager Using the manager
layout configuration, layout configuration,
you can limit the you can limit the
number of text boxes number of text boxes
and labels displayed on and labels displayed on
the details page the details page

Prepared by Litmos at 12/16/2022 3:20:09 AM 32 of 50

Question Type: Correct Actual Answer Answer Given
Multiple Choice Shipment# 10059 is
a Multi-Shop
shipment with two
orders. Both orders
are picked up in
New York City. One
of the orders is
dropped off in
Philadelphia,
Pennsylvania, and
the other order is
dropped off in
Baltimore,
Maryland. There is
empty capacity on
this shipment for
you to add another
order (# 1234),
which is picking up
in Philadelphia and
dropping off in
Baltimore. The
status of Shipment#
10059 is ³SECURE
RESOURCES:
NOT_STARTED´

Which shipment
planning option
should you use to
ensure that order
release # 1234 is
assigned to
Shipment # 10059?

Weight: 1 Manual
Move Order to Existing Move Order to Existing
Shipment Shipment
Show Routing Options

Bulk Plan
Question Type: Correct Actual Answer Answer Given
Multiple Choice Which statement is
correcting
regarding the OTM
Parameter Set?
OTM allows more than
one Parameter Set, but
Weight: 1
they must be stored in
the PUBLIC domain.
Parameter Sets are Parameter Sets are
mandatory during Bulk mandatory during Bulk
planning. planning.
If you want to create a
Parameter Set, you
must name it
"DEFAULT".

Prepared by Litmos at 12/16/2022 3:20:09 AM 33 of 50

 OTM allows only one
Parameter Set, and it is
stored in the PUBLIC
domain.
There are less than 30
parameters that can be
changed in the Default
Parameter Set.
Question Type: Correct Actual Answer Answer Given
Multiple Choice Which statement is
false about
shipment cost?
Planned cost field can Planned cost field can
be changed by any be changed by any
Weight: 1
shipment modifications shipment modifications
that may affect the cost. that may affect the cost.
Cost Fixed check box at
shipment indicates that
the cost for this entire
shipment is fixed.
Rate Offering Fixed
check box at shipment
indicates that the rate
offering for this
shipment is fixed and
cannot be changed.
Rate Record Fixed
check box at shipment
indicates that the rate
record for this shipment
is fixed and cannot be
changed.
Question Type: Correct Actual Answer Answer Given
Multiple Choice In which two
situations is
redriving used?
To redrive the shipment
from the first stop of the
Weight: 1
shipment to the location
of the tracking event
To redrive the entire To redrive the entire
shipment shipment
To redrive the shipment
if the tracking event
location is a specific
stop on a shipment
To redrive the shipment To redrive the shipment
from the location of the from the location of the
tracking event to the tracking event to the
next stops of the next stops of the
shipment shipment

Prepared by Litmos at 12/16/2022 3:20:09 AM 34 of 50

Question Type: Correct Actual Answer Answer Given
Multiple Choice When defining a
Region, there is a
parameter called
³Representative
Location´When is
it appropriate to set
a value for
³Representative
Location´"
Use this parameter to
define a range of values
that will be included in
Weight: 1
the region you are
defining, such as a
range of zip codes.
Do it if you are using Do it if you are using
Cooperative Routing Cooperative Routing
and you want the and you want the
location to be location to be
considered in the considered in the
cooperative routing cooperative routing
aggregation. aggregation.
Do it when you want to
create a template
Region that you can use
to quickly create other
regions in the future.
Representative Location
is the location of the
person assigned to the
LOGISTICS Role for the
region.
Question Type: Correct Actual Answer Answer Given
Multiple Choice The company
Planner has a dual
role (Planner and
Documentation). In
which two ways can
you assign multiple
roles to a user?
Add Grantee user in the Add Grantee user in the
Weight: 1
User Role. User Role.
Add User Role Grants Add User Role Grants
in User Role. in User Role.
Add Access Control List
in the User Roles.
Add Multiple Roles in
User Manager.
Question Type: Correct Actual Answer Answer Given
Multiple Choice What is the correct
sequence of setups
to assign a Screen
Set ID to a User?
Always unassign
existing menu and
Weight: 1
create a screen Set ID,
assign it to User.
Create a Screen set ID, Create a Screen set ID,
assign it to Menu assign it to Menu
Manager and assign it Manager and assign it
to User. to User.
Prepared by Litmos at 12/16/2022 3:20:09 AM 35 of 50
 Create a Screen Set ID
and assign it to Domain.
Create a Screen Set ID
and assign it to User.
Question Type: Correct Actual Answer Answer Given
Multiple Choice Identify the
incorrect option
about the
commodity setup.
Specific temperature Specific temperature
controls cannot be controls cannot be
Weight: 1
assigned while defining assigned while defining
a commodity. a commodity.
Incompatible
commodities can be
captured while defining
a commodity.
You can select
transportation modes
while defining a
commodity.
You can link commodity
with equipment types
while defining a new
commodity.
Question Type: Correct Actual Answer Answer Given
Multiple Choice Identify the option
which cannot be
performed by the
Screen Set
Manager.
Define default criteria
Weight: 1
for search fields.
Customize the Results
page columns.
Customize the Actions
menu.
Create multi-panel Create multi-panel
layouts containing layouts containing
tables, maps, Gantt tables, maps, Gantt
charts. charts.
Question Type: Correct Actual Answer Answer Given
Multiple Choice Why is OTM
considered to be
based on an n-Tier
model?
Because the OTM
presentation layer, the
application processing
Weight: 1 layer, and the data
management layers are
logically separate
processes
Because OTM supports Because OTM supports
third party application third party application
integrations (PCMiler, integrations (PCMiler,
Rand McNally, etc.) Rand McNally, etc.)

Prepared by Litmos at 12/16/2022 3:20:09 AM 36 of 50

 Because it supports the
tiered domain structure,
from Public, to Parent,
to Child, to grandchild
domain levels
Because OTM¶s data is
based on whether it is
Master data, Static
data, or Transactional
data
Question Type: Correct Actual Answer Answer Given
Multiple Choice Which of these is a
newly enabled
attribute that allows
you to generate a
Modeling Scenario
utilizing
Sourcing/Proposed
Rates?
Weight: 1 MODELING_DEFAULT
PROPOSED_ATTRIBU
TE_ID
IS_SOURCING_RATE IS_SOURCING_RATE

ACTNE_RATE FLAG
Question Type: Correct Actual Answer Answer Given
Multiple Choice When assigning
rules to service
providers to
support Freight
Payment, which two
statements are
true?
Each service provider Each service provider
can have only one can have only one
Weight: 1
match rule profile match rule profile
assigned. assigned.
One can assign a match One can assign a match
rule profile and an rule profile and an
approval rule profile to a approval rule profile to a
service provider. service provider.
The Autopay check box
should be selected for
the rules to apply.
The rules cannot be
changed once assigned
to a service provider.
Question Type: Correct Actual Answer Answer Given
Multiple Choice Which statement is
true about the
Detect Invalid
Product
Classification
Recurring Process?
It is used to search for
product classification
Weight: 1
codes that are
disapproved for an Item.

Prepared by Litmos at 12/16/2022 3:20:09 AM 37 of 50

 Product classification Product classification
codes may become codes may become
obsolete due to the obsolete due to the
introduction of new introduction of new
codes and the process codes and the process
is used to detect such is used to detect such
codes. codes.
It is used to detect
product classification
codes that are in a
wrong format as
opposed to the one
specified in Business
Number Generator.
The recurring process
to detect invalid product
classification codes can
be run only by using an
agent action.
Question Type: Correct Actual Answer Answer Given
Multiple Choice Identify two objects
that need to be set
up in GTM when
you want to receive
a new tariff
containing
classification data
into GTM.
Weight: 1 Data Load Type Data Load Type
Product Classification Product Classification
Type Type
Content Set

Data Version
Question Type: Correct Actual Answer Answer Given
Multiple Choice When creating an
Itinerary one of the
parameters that can
be set on the
Parameters tab is
the ³INCO Term
Profile ID´What are
INCO Terms?
Incorporation terms that
define the geographies
Weight: 1
that a carrier is licensed
to operate within.
Insurance Company
terms that define the
carrier¶s indemnification
rights and
responsibilities.
International Cargo
Operations terms that
define the classes of air
and ocean vessels
approved for shipping
commercial freight.

Prepared by Litmos at 12/16/2022 3:20:10 AM 38 of 50

 International Commerce International Commerce
terms that define which terms that define which
party owns freight at party owns freight at
each point in the each point in the
shipment process. shipment process.
Question Type: Correct Actual Answer Answer Given
Multiple Choice By default, OTM
installs some
agents at the time of
installation. Identify
two correct
statements.
All agents are inactive.
The Administrator or
other authorized
Weight: 1 persons must review
and activate those they
want to run in their
environment.
All agents are active.
The Administrator or
other authorized
persons must review
and activate those they
want to run in their
environment.
By default, some agents By default, some agents
are active, while others are active, while others
are inactive. The are inactive. The
Administrator or other Administrator or other
authorized persons authorized persons
must review the agents must review the agents
and activate or and activate or
deactivate deactivate
appropriately. appropriately.
OTM will install agents OTM will install agents
into domains such as into domains such as
PUBLIC and PUBLIC and
SERVPROV. SERVPROV.
OTM will install agents
into the designated
³company´domain, but
not into domains such
as PUBLIC and
SERVPROV.
Question Type: Correct Actual Answer Answer Given
Multiple Choice Which three OTM
objects can be used
to create Trade
Transactions in
GTM?
Weight: 1 Order Release Order Release

Invoice

Shipment Shipment

Order Movement

Order Base

Shipment Group Shipment Group

Prepared by Litmos at 12/16/2022 3:20:10 AM 39 of 50

Question Type: Correct Actual Answer Answer Given
Multiple Choice What are two things
that you can do in
order to run a Bulk
Plan that will not
plan any multi-stop
shipments?
Create a Parameter Set Create a Parameter Set
that builds only direct or that builds only direct or
pool shipments. Select pool shipments. Select
Weight: 1
this parameter set as a this parameter set as a
constraint for your Bulk constraint for your Bulk
Plan. Plan.
Create a Bulk Plan Set
that specifies that only
truckload orders should
be created and select
that set for this Bulk
Plan.
Create a Parameter Set Create a Parameter Set
that builds only direct that builds only direct
shipments. Select this shipments. Select this
parameter set as a parameter set as a
constraint for your Bulk constraint for your Bulk
Plan. Plan.
The Bulk Plan option
cannot be configured to
run in this way;
therefore, do not run the
Bulk Plan option.
Question Type: Correct Actual Answer Answer Given
Multiple Choice How does one
execute the
CSVUTIL upload
into OTM?
Run the import just as Run the import just as
Weight: 1 you would for a you would for a
standard CSV file. standard CSV file.
Download CSVUTIL
(freeware) from the
internet, install it to your
PC, and direct it to your
OTM database.
Select CSVUTIL under
Business Process
Automation > Data
Management >
CSVUTIL.
Select CSVUTIL under
Business Process
Automation > Data
Management > Power
Data > CSVUTIL.
In the browser URL
window, point to "server
name"/GC3/html/UTILS,
then select CSVUTIL
from the dropdown list.

Prepared by Litmos at 12/16/2022 3:20:10 AM 40 of 50

Question Type: Correct Actual Answer Answer Given
Multiple Choice Which two
statements are true
about Saved query?
Saved queries can be Saved queries can be
Weight: 1 created from search created from search
page. page.
Saved queries are user
specific, not domain
specific.
Saved queries cannot
be SQL based.
Saved queries contain Saved queries contain
pre-defined search and pre-defined search and
sort parameters. sort parameters.
Question Type: Correct Actual Answer Answer Given
Multiple Choice What must you do
in order to export
data from the
CONTACT table, so
that the data only
includes contacts
with email
addresses ending
with
³#oracle.com´"
Export the data first,
and then use software
Weight: 1 such as MS Excel, MS
Access, or direct SQL to
filter the data.
Use the ³Where´clause Use the ³Where´clause
on the CSV Export on the CSV Export
screen to specify the screen to specify the
³#oracle.com´qualifier. ³#oracle.com´qualifier.
Create a CSVUTIL file
that specifies the
³#oracle.com´qualifier.
The CSV utility is useful
for managing large
amounts of data, but is
not capable of filtering
data during the export
process.
Question Type: Correct Actual Answer Answer Given
Multiple Choice Which three
statements are true,
when setting up
user
signing/approval
authority to support
Freight Payment
rules?
One can specify the set
of service providers that
Weight: 1
the user has approval
limits for.
The user approval rules
cannot be changed for
the user after the
service providers have
been paid.
Prepared by Litmos at 12/16/2022 3:20:10 AM 41 of 50
 Different users can Different users can
have different maximum have different maximum
approval amounts. approval amounts.
If the freight settlement If the freight settlement
process is automated in process is automated in
OTM, then we do not OTM, then we do not
have to set up user have to set up user
approval limits. approval limits.
The approval rule profile The approval rule profile
assigned to the user assigned to the user
sets the maximum sets the maximum
amounts that a user can amounts that a user can
manually approve or manually approve or
adjust in an Invoice. adjust in an Invoice.
Question Type: Correct Actual Answer Answer Given
Multiple Choice Identify the
incorrect option
pertaining to TIHI.
This is configured in This is configured in
Weight: 1
Item Setup. Item Setup.
This configuration will
impact mixed pallet
functionality.
This configuration
captures the number of
layers of boxes/cartons
that can be stacked on
the pallet.
This configuration
captures the number of
layers of boxes/cartons
stored on a layer.
Question Type: Correct Actual Answer Answer Given
Multiple Choice You have created an
agent that is
supposed to
generate an alert
whenever an Order
Release is created.
Alerts are generated
when an Order
Release is created
using OTM's UI
screens, but not
when the orders
come into OTM via
integration.

Where should you

look within the
agent configuration
settings to
troubleshoot and
resolve this
problem?

Weight: 1 Data Type Association

Threshold ID

Restrictions Restrictions

User Role
Prepared by Litmos at 12/16/2022 3:20:10 AM 42 of 50
 Saved Conditions
Question Type: Correct Actual Answer Answer Given
Multiple Choice You've executed a
CSV upload in
which you have
modified some
existing records,
and created some
new records. There
were no errors
during the upload.
However, OTM is
still retrieving only
the old data, not the
new data that was
just uploaded.

Select the action

that you can take to
address this.

Rerun the upload, this

time making sure that
Weight: 1
you specify the "uu"
command.
Rerun the upload, this
time making sure that
you specify the "dd"
command.
You must reboot the
database server in
order to commit the
changes.
You should clear the You should clear the
OTM cache. OTM cache.
Question Type: Correct Actual Answer Answer Given
Multiple Choice Bob is a user in the
³3PL COMPANY´
domain and has
been assigned the
³Admin´User Role
ID. What must you
do to make sure
that Bob has the
authority to view
and plan all the
orders from all the
Client domains
shown?
Do nothing, because Do nothing, because
Bob will automatically Bob will automatically
Weight: 1
be authorized to plan all be authorized to plan all
of the orders. of the orders.
Use OTM¶s VPD to
assign Bob¶s user ID in
each of the Client
domains.
Use OTM¶s to add Bob
to the Planner Role in
the 3PL COMPANY
domain.

Prepared by Litmos at 12/16/2022 3:20:10 AM 43 of 50

 Create a Role in each of
the Client domains with
the same name, and
add Bob¶s user ID to the
Role.
Create a Role in the
3PL COMPANY domain
that has at least
³Default´authority, and
use OTM¶s GRANTS to
assign Bob¶s user ID in
each of the Client
domains.
Question Type: Correct Actual Answer Answer Given
Multiple Choice How would you
export the
CALENDAR table,
and all "child"
tables associated
with CALENDAR?
Run the Export CSV Run the Export CSV
utility in OTM and select utility in OTM and select
Weight: 1
the command the command
"xcsvwpcd". "xcsvwpcd".
Run the Export CSV
utility in OTM and select
the command "xcsvc".
Run the SELECT SQL
command against the
OTM database using
the "/child/all"
parameters.
Run the Export CSV
utility in OTM, select the
command "xcsv", and
check the "Child" box.
Question Type: Correct Actual Answer Answer Given
Multiple Choice Identify two
statements that are
true about multi-
stop itineraries?

Note: Multi-Stop
checkbox was
renamed as 'Pool-
Crossdock Itinerary'
in 2020.
The Multi-Stop (Pool-
Crossdock) Itinerary
Weight: 1
cannot be used to plan
direct shipments.
The Multi-Stop (Pool- The Multi-Stop (Pool-
Crossdock) Itinerary Crossdock) Itinerary
option needs to be option needs to be
checked. checked.
Multi-Stop (Pool-
Crossdock) Itineraries
contain multiple itinerary
legs.
The "Primary" check The "Primary" check
box is mandatory on a box is mandatory on a
Multi-Stop (Pool- Multi-Stop (Pool-
Crossdock) itinerary leg. Crossdock) itinerary leg.
Prepared by Litmos at 12/16/2022 3:20:10 AM 44 of 50
Question Type: Correct Actual Answer Answer Given
Multiple Choice Which SOAP Web
Service should you
use to process
agent actions
against one or more
existing
transactional
objects?
Weight: 1 CommandService

TransmissionService TransmissionService

Workflow Web Services

MessageService
GtmRestrictedPartyServ
ice
Question Type: Correct Actual Answer Answer Given
Multiple Choice Your client has a
requirement to
perform automatic
Sanction Screening
on a Party. Which
two configurations
do you use in GTM
to meet the
requirement?
Weight: 1 Agents Agents

Restricted Party List

Service Preference and
Service Parameter for
Restricted Party
Screening
Compliance Rules Compliance Rules

Business Monitor
Question Type: Correct Actual Answer Answer Given
Multiple Choice If you want to
specify that a
license applies to a
certain SHIP_FROM
country, where do
you do it?
Weight: 1 Regime

Port grid

Involved parties grid

Regions grid Regions grid

Question Type: Correct Actual Answer Answer Given
Multiple Choice In which part is the
Tender Timeout
configured?
On the Service Provider
Weight: 1
Header
On the location role

Prepared by Litmos at 12/16/2022 3:20:11 AM 45 of 50

 On the contact On the contact
associated to the associated to the
Service Provider Service Provider
On the Communication
and Remarks tab
Question Type: Correct Actual Answer Answer Given
Multiple Choice In which of the
following cases is it
useful to use the
³Show Routing
Options´shipment
planning method?
when you want to auto-
tender the shipment
Weight: 1
after planning is
complete
when you want to when you want to
specify the itinerary that specify the itinerary that
you want to use for the you want to use for the
shipment shipment
when you want to
specify the carrier that
you want to receive the
shipment tender
when you want to
override the delivery
constraints on the Order
Base
when you want to view when you want to view
OTM¶s recommendation OTM¶s recommendation
without actually without actually
planning the shipment planning the shipment
Question Type: Correct Actual Answer Answer Given
Multiple Choice "Partner Type" is an
important Party
level information in
GTM
implementation for
Company A. Which
are the three ways
to capture that
information on the
Party master?
Weight: 1 Registration

Flexfields Flexfields

Remarks Remarks

User-defined Codes User-defined Codes

Out-of-box "Partner
Type" field

Prepared by Litmos at 12/16/2022 3:20:11 AM 46 of 50

Question Type: Correct Actual Answer Answer Given
Multiple Choice Your customer has
US and Germany
orders. How would
you setup a User
role with read/write
access for US
orders, and only
read access for
German orders?
Assign multiple User
Weight: 1 Roles while creating
User.
Assign multiple User
Role grants in User
Role.
Access can be Access can be
controlled via VPD controlled via VPD
profile along with profile along with
external Predicates. external Predicates.
Access can be
controlled via Access
Control List and assign
to User Role.
Question Type: Correct Actual Answer Answer Given
Multiple Choice In which two ways
can you determine
which tables have
"parent" or "child"
relationships to the
CONTACT table?
Refer to Power Data
Weight: 1 under Configuration and
Administration.
Export the CONTACTS Export the CONTACTS
table, and use the table, and use the
"scsvwpcd" command. "scsvwpcd" command.
View the data dictionary View the data dictionary
to identify the to identify the
relationships. relationships.
In OTM, navigate to
Configuration and
Administration >
Contacts > Contacts.
Select "Help" and
review the data table
relationships.

Prepared by Litmos at 12/16/2022 3:20:11 AM 47 of 50

Question Type: Correct Actual Answer Answer Given
Multiple Choice 12. When creating a
new Declaration
type in Global Trade
Management (GTM),
which three
processes may
need to be
configured
depending on the
requirements of the
local customs
authority? (Choose
three.)
Define a constraint set Define a constraint set
with grouping criteria with grouping criteria
that identifies how to that identifies how to
Weight: 1
combine Trade combine Trade
Transactions into a Transactions into a
Declaration. Declaration.
Create aggregation Create aggregation
criteria that consolidate criteria that consolidate
Transaction Lines, Transaction Lines,
based on parameters based on parameters
such as tariff code or such as tariff code or
country of origin, into country of origin, into
fewer lines on the final fewer lines on the final
Declaration. Declaration.
Set up a License Code
that defines whether a
license is incremented
or decremented for the
Trade Transaction
Set up a data Set up a data
configuration that configuration that
defines the data defines the data
required to be copied required to be copied
from the Transaction from the Transaction
onto the Declaration. onto the Declaration.
Question Type: Correct Actual Answer Answer Given
Multiple Choice Identify the two
elements that you
must define when
creating an Agent.
Weight: 1 Agent ID Agent ID

Domain Query

Agent Type Agent Type

Saved Condition

Event

Prepared by Litmos at 12/16/2022 3:20:11 AM 48 of 50

Question Type: Correct Actual Answer Answer Given
Multiple Choice When adding a
migration object
group as part of
migration project,
which attribute
setting indicates
how the objects in
the group will be
processed on a
subsequent import?
Weight: 1 Raise lifetime event

Transaction code Transaction code

Screen set ID

Refresh cache
Question Type: Correct Actual Answer Answer Given
Multiple Choice View the exhibit. If
you created a
standard 3PL
domain structure,
which two
relationships would
OTM also create by
default?
SERVPROV domain to
have READ and WRITE
Weight: 1
permission for 3PL
Company domain.
3PL COMPANY domain 3PL COMPANY domain
to have READ and to have READ and
WRITE permission for WRITE permission for
Client 1, Client 2, Client Client 1, Client 2, Client
3, and Client 4 3, and Client 4
subdomains. subdomains.
BLUEPRINT domain to
have READ permission
for 3PL Company
domain.
GUEST domain to have
READ permission for
Client 1, Client 2, Client
3, and Client 4
subdomains.
BLUEPRINT domain to
have READ permission
for Client 1, Client 2,
Client 3, and Client 4
subdomains

Prepared by Litmos at 12/16/2022 3:20:11 AM 49 of 50

Question Type: Correct Actual Answer Answer Given
Multiple Choice Which three
attributes can be
controlled based on
User Preference
setting in Global
Trade Management
(GTM)? (Choose
three.)
Weight: 1 Menu

Business Monitor Business Monitor

Date Format Date Format

Language Language

User Role

Prepared by Litmos at 12/16/2022 3:20:11 AM 50 of 50