Scribd
Upload
6 views1 page

Modify Commands

The document outlines various commands used in a drawing application, including Erase, Move, Copy, Join, Trim, Extend, Offset, Fillet, Chamfer, Explode, Rotate, Array, Mirror, Stretch, Scale, and Lengthen. Each command serves a specific function, such as modifying object shapes, sizes, or arrangements. These commands are essential for manipulating objects within the drawing environment.

Uploaded by

Krako Tram
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
6 views1 page

Modify Commands

The document outlines various commands used in a drawing application, including Erase, Move, Copy, Join, Trim, Extend, Offset, Fillet, Chamfer, Explode, Rotate, Array, Mirror, Stretch, Scale, and Lengthen. Each command serves a specific function, such as modifying object shapes, sizes, or arrangements. These commands are essential for manipulating objects within the drawing environment.

Uploaded by

Krako Tram
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Erase: Erase command is used to erase any object that has been drawn

Move: Move command is used to move objects at specified distance and direction from the
original.

Copy: Copy command is used to copy objects at a specified distance and direction from the
originals

Join: Join command is used to combine lines, arcs, elliptical arcs, polylines, 3D polylines,
splines, and helixes by their endpoints into a single object

Trim: Trim command is used shorten objects to meet the edges of other objects.

Extend: Extend command is used to increase the length of objects to meet the edges of
other objects

Offset: Offset Command is used to create Concentric Circles, parallel lines and parallel
curves.

Fillet: Fillet command is use to create a rounded corner by creating an arc that is tangent to
two selected objects

Chamfer: Chamfer command Is used to connect two objects with an angled line in 2D, or
creates an angled face between the adjacent faces of a 3D Solid. It is used to create
chamfer.

Explode: Explode command is used to convert an compound object such as a polyline,


dimension, hatch, or block reference into individual elements

Rotate: Rotate command is used to rotate objects in a drawing around a specific base point

Array: Array command is used to create copies of selected objects to be arranged in a


pattern called an array.

Mirror: Mirror command is used to flip objects about a specific axis to create a symmetrical
image. It flips objects about an axis called mirror line to create a mirror image

Stretch: Stretch command is used to lengthen and shorten parts of the model.

Scale: Scale command is used to make an object uniformly larger or smaller

Lengthen: Lengthen Command is used to change the lengths of object and the included
angle of arcs

You might also like