Scribd
Upload
105 views2 pages

Anytek Fingerprint Lock Manual Optimized

The document provides instructions for using a fingerprint lock, including charging via USB, recording fingerprints, and deleting fingerprints. It details the indicator light statuses for various functions and specifies that only the administrator can authorize and delete fingerprints. Additionally, it includes technical specifications such as recognition time and battery capacity.

Uploaded by

robbiek0751
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
105 views2 pages

Anytek Fingerprint Lock Manual Optimized

The document provides instructions for using a fingerprint lock, including charging via USB, recording fingerprints, and deleting fingerprints. It details the indicator light statuses for various functions and specifies that only the administrator can authorize and delete fingerprints. Additionally, it includes technical specifications such as recognition time and battery capacity.

Uploaded by

robbiek0751
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

指纹锁

FINGERPRINT LOCK

Fingerprint 2 Years Water Resistant

Ⅰ.USB Interface: Ⅱ.Indicator


The product is charged by USB. Use 3-color indicator. Different indicator represents
Please fully charge the product different devices and status.
for the first time.
Please check the details as below chart:

4 Indicator status Function


Low power Red light flash
Charging Red light always on

3 Full charged Lights off


2
Green light flash Fingerprint collection mode

Green light always on Successful to collect


fingerprint
1
Administrator fingerprint
Blue light always on
authorization
Green light flash Unlocked successfully
Components: Delete fingerprint mode
Red light always on
1.USB Port 2.Fingerprint Reader
Red light flash Failed to collect fingerprint
3.LED Light 4.Lock Beam

Ⅲ.Description Of First Administrator’ s Fingerprint Record

5.It records unsuccessful


when red light flash

6.Total of 10 times of collection


1.Long press 2.Left your finger 3.Start record 4.Record 10 times
was successful, with a loud
sensor 3 when blue light the fingerprint with the same finger,
sound "Di" ,and green light
seconds flash when green and the blue light and
flash continuously,the
light flash green light flashes
administrator's fingerprint was
recorded successfully.
5.It records successful
when blue light flash

Ⅳ.Number 2 to 10 Fingerprint Recording Instructions

5.It records unsuccessful


when red light flash

1.Long press 2.Administrator 3.Start record the 4.Record 10 times 6.Total of 10 times of collection
sensor 3 authorize fingerprint fingerprint when with the same finger, was successful, with a loud
seconds when blue light flash green light flash and the blue light and sound "di" ,and green light flash
continuously. green light flashes continuously, the fingerprint was
recorded successfully.
5.It records successful
when blue light flash
Remarks:
1. The first and second fingerprints are the administrator fingerprint by default.
2. Collecting the second to tenth fingerprints requires administrator fingerprint authorization.

Ⅴ.Description Of Delete Fingerprint Ⅵ.Specifications


Support 360 degree angel
fingerprint recognize
Resolution: 508DPI
ESD: +/-12kV air, +/-8kV contact
FRR: <1%
FAR: <0.002%
Recognize time: <300mS
Battery: 3.7V 300mAh
Charger: 5V 1A
1.Long press 2.Administrator 3.The fingerprint was
sensor 10 authorize fingerprint deleted successfully
seconds when red light flash when green light flash
continuously continuously and sound
continuously

Remarks:
Only the administrator can delete the fingerprint and delete all the fingerprints at once.

Ⅶ.Low voltage
When the voltage ≤3.5V, the red indicator flash fast for 15s. If keep in the status of low batter, it will alarming per minute.
一、USB接口： 二、指示灯
设备通过数据线连接USB进行充电。 采用3色指示灯，指示灯不同颜色，不同状态代表设备不同
（首次使用请先给设备充满电。） 状态。详情见下表：

状态 指示灯状态
4 电量低 红灯闪烁

充电中 红灯长亮

充满电 灯灭
3
2 绿灯闪烁 指纹采集模式

绿灯长亮 指纹采集成功
1
蓝灯长亮 管理员指纹授权

绿灯闪烁 解锁成功

红灯长亮 清除所有指纹模式
部件识别： 红灯闪烁 指纹采集失败
1.USB接口 2.指纹采集器
3.LED指示灯 4.锁梁

三、首次（管理员）指纹录入说明

5. 红灯亮，采集失败。

1. 长按3秒。 2. 蓝灯亮， 3. 绿灯闪烁, 4. 同一手指采集10次, 6. 累计10次成功采集，


松开手指。 开始采集指纹。 不同角度，不同方向 “嘀”一声长响，绿灯长亮，
采集，期间蓝绿灯闪烁。 管理员指纹采集成功。

5. 蓝灯亮，采集成功。

四、第二个到第十个指纹录入说明

5. 红灯亮，采集失败

1. 长按3秒。 2. 蓝灯长亮， 3. 绿灯闪烁, 4. 同一手指采集10次, 6. 累计10次成功采集，


管理员指纹 开始采集指纹。 不同角度，不同方向 “嘀”一声长响，绿灯长亮，
录入授权。 采集，期间蓝绿灯闪烁。 当前指纹采集成功。

备注：
1. 默认第一第二枚指纹为管理员指纹。 5. 蓝灯亮，采集成功。
2. 采集第二到第十枚指纹需要管理员指纹授权。

五、删除指纹说明 六、规格参数

支持360°任意方向按压式指纹识别；
分辨率508DPI；
ESD：+/-12kV空气，+/-8kV接触；
FRR：<1%；
FAR：<0.002%；
识别时间：<300mS；
电池容量：3.7V 300mAh
1. 长按10秒。 2. 红灯长亮， 3. 绿灯长亮并长响， 充电电压：5V 1A
管理员指纹授权。 指纹删除成功。

备注：
只有管理员才能删除指纹，并且是一次性删除全部指纹。

七、低压
当电压等于或低于 3.5V 时红色指示灯会快闪 15 秒；如一直处于低电状态，每隔一分钟，就报警一次。

You might also like