131

In the box Power On (First Time User) Single Earbud Usage LED Indicators / Functionalities Charging The Case Charging The Earbuds
1x User Manual Step 1: To automatically switch the earbuds on (Smart Power
1 1x pair of Ear-Buds 4 Step 1: Please note that both the earbuds can be used in mono Step 1: Please insert the earbuds back inside the charging case in
On) simply open the lid of the charging case. When you open the Step 1: To charge the case, plug one end of the charging cable into the
Get. Set. mode. Use either of the two options; Smart Power On or Manual

131
2 1x Charging Case 5 1x Charging Cable lid of the case, our IWP™ (Insta Wake N’ Pair) Technology enables
case and the other end into a USB port/adapter correct orientation.
the earbuds to power on automatically, get connected and enter Power On for switching on the desired earbud

Play.
into the connection mode
3 2x Pairs of Additional Earmuffs Long press the MFB on either earbud for 2 seconds Step 2: Flashing white LEDs indicate that the charging case is being
2 Seconds Step 2: A solid white LED will indicate that the earbuds are being
OR Step 2: The selected earbud will automatically enter the connection to activate Voice Assistant charged. Once the charging case gets fully charged, the LEDs turn into
mode. charged. Once fully charged the LED turns off
Product Overview To manually switch the earbuds on (Manual Power On), long
press the Multifunction Button (*MFB) on both earbuds for 3
solid white
Step 3: Turn on Bluetooth on your phone/media device and search Step 3: Once the earbuds are fully charged, the charging case
seconds until the LED starts to flash in blue 3 Seconds Long press the MFB on both earbuds for 3 seconds
automatically switches off to save power.
1 MFB (Multi Function Button) 3 Charging Port for ‘Airdopes 131’ to connect to manually Power On (Blue LED)
Step 2: Both the earbuds will automatically pair with each other.
Get ready to get yourself soaked in / Power Button The earbuds will enter into the Connection Mode
Notes: Note:
musical bliss with your very own pair of 2 Indicator Lights Step 3: Turn on the Bluetooth functionality on your 5 Seconds Long press the MFB on either earbud for 5 seconds • Before using the ear-buds for the first time, it is recommended to
phone/media device and scan • To switch to Stereo mode, simply take out the other earbud from in order to manually switch off the earbuds (Red LED) fully charge the ear-buds. Also, please keep the lid of the charging
boAt Airdopes 131. Please consider this Step 4: Search for ‘Airdopes 131’ and pair accordingly. Enter
the case. It will automatically power on and pair with the previously
case closed while charging and use a 5V/2A adaptor
selected earbud, hence enabling Stereo usage.
manual as your guiding map towards the ‘0000’ as the passkey if asked.
Triple Tap Triple tap the MFB on both earbuds to perform the
reset (Red LED)
shores of musical bliss. Knowledge of 1
3
Congratulations! Your earbuds are now connected successfully
via Bluetooth Bluetooth
• You cannot skip tracks or return to the previous tracks in Mono
mode.
Bluetooth and device connectivity is
essential for steering this boat and Power On (Subsequent Usage) Airdopes 131
therefore we strongly recommend 2
3 IWP Technology: The next time you when you open the lid of the
case, our IWP™ (Insta Wake N’ Pair) Technology enables the
thorough reading of this manual; you may earbuds to power on automatically, and get connected to the
previously connected device.
also refer to the same at times when you Notes:
face any sort of difficulty in future. • Pairing mode lasts for 5 minutes. If the pairing time is missed
then you will need to reconnect the ear-buds and follow the
above mentioned procedure

• Airdopes 131 remembers previously connected devices; once

switched on, the ear-buds automatically reconnect to the MFB
previously connected device (Multi Function Button)
Note - The LED lights located on the charging case indicate the battery status
of the case.
3

131
Voice Assistant Factory Reset Common Problems with Solutions Specifications Warning
Smart Power Off Basic Functions
Step 1: Long press the MFB on either earbud for 2 seconds to • Please follow the instructions to operate
activate the voice assistant • Please charge the ear-buds with input power below 5V/2A in order
Get. Set.
Bluetooth Version V5.0
Step 1: After usage, remove both the earbuds from your ears Voice Assistant: Long press the MFB on either earbud for 2 seconds to Perform the Factory Reset in case you face any difficulty while to protect the battery
If only one earbud is functioning: Driver Size 13mm
• Please don’t use the ear-buds in extreme temperatures

Play.
Step 2: The respective voice assistant screen pops up and activate the voice assistant operating your Airdopes 131
SNR 90dB • Please don’t use the product near water
you may place your commands at ease Step 2: Place the earbuds back inside the charging case in correct
Step 1: Keep both the earbuds inside the case in their correct Music Playtime Up to 3 Hours (Up to 12H with Case) • Please keep the product away from heat sources, as the
orientation and close the case lid Answer/Hang Up Call: Single press the MFB on either earbud to answer orientation heat may damage it
Tips: You may try the following commands, Talk Time Up to 3 Hours
an incoming call and once again to hang up an ongoing call • Don’t jam the ports such as charger port, LED port, etc.
Standby Time 100 Hours • It is recommended to utilize the product below the
Step 3: The earbuds will automatically switch off (and enter into Step 2: Triple tap the MFB on both earbuds to perform the reset. Red Simply insert the earbuds back into the
• What is the weather? Transmission Range 10m maximum volume in order to protect hearing and extend
Reject Call: Long press the MFB for 2 seconds to reject incoming calls. LED blinks for 1 sec to indicate the same case and take them out or perform the
• Play a song charging mode.) THD <5% the ear-buds’ service life.
• Set a reminder Factory Reset • Never disassemble or modify the device to avoid any permanent
Step 3: After the reset, close the lid of the carry case Bluetooth Profile HSP, HFP, A2DP, AVRCP
damage or danger
Play/Pause Music: Single press the MFB on either earbud to play a song Frequency 20Hz-20000Hz
• Do not use the device during a thunderstorm to avoid irregular
Step 4: Congratulations! Your Airdopes 131 has been reset and ready
or to pause one Battery Earbuds 40mAh x2 function or risk of electric shock
to establish connection again.
Battery Charging Case 650mAh • Don’t use harsh chemicals to clean the device
Manual Power Off Next Track: When playing music, double press the right earbud’s MFB in Charging Time 2 Hours
order to skip to the next song on the playlist
If earbuds are not in scan mode: Advisable: The earbuds start at a 100% volume and it may need to
Step 1: Long press the MFB on either earbud for 5 seconds in order to be reduced when the earbuds are switched on at first. This can be
manually switch off the earbuds. Please note that this powers off both
Previous Track: When playing music, double press the left earbud’s MFB
in order to return to the previous song on the playlist
Troubleshooting done by using the volume control on the phone/ media device.
the earbuds
Potential Problem Solution
Note: Volume cannot be controlled via earbuds and can only be
Step 2: Please keep the earbuds back into the charging case to charge Simply insert the earbuds back into the If one earbud is not working Perform the Factory Reset
adjusted via phone/media device Charging norms & Precautionary Guidelines:
the earbuds case and take them out or perform the If earbuds are not in connection/ Perform the Factory Reset
scan mode
“What is the weather?” Factory Reset If earbuds disconnect during phone Charge the earbuds or perform the
1) Charger/Brick/Adapter : 5V/2A
call Factory Reset 1) Cable/Wire : Standard Cable (35 Strands
“Play a song” If there are other exceptions in Place the earbuds back into the @0.10mm diameter/strand)
“Set A Reminder” usage charging case and try using them
gain or perform the Factory Reset Any other accessory can be paired up with the product as long as the
specifications are as per above norms.