Wallplates and accessories | Designer | Claro and Satin Colors ® ®

4.75 in (121 mm)

Shown actual size:

Maestro dimmers
and 2-gang Claro
wallplate in White (WH).

4.69 in (119 mm)

.30 in
(7.6 mm)
profile

Product family features Ganging and derating

• Can be used in conjunction with the • Designer wallplates use standard ganging
following dimmer(s), switch(es), sensor(s), and • Requires fins to be removed from dimmers for
accessories: Maestro®, Maestro IR®, Maestro proper spacing (“Fins Broken” ganging), see p. 246
Wireless®, Caséta® Wireless, Pico® wireless, Diva®,
• May require derating (i.e., reduction of dimmer
Skylark Contour® and Skylark® controls, and Claro®
capacity due to fin removal), see Derating
and Satin Colors® accessories
Tables, see pp. 250 – 252
• All Lutron wallplates are screwless, seamless,
and have no visible hardware; the front plate
securely snaps into the alignment adapter plate
• Full line of wiring devices in Designer style opening
• Blank inserts available for Gloss (DV-BI-) and
Satin Colors (SC-BI-)
• Customize your designer wallplate with engraving.
Contact customer service to get started;
1.888.LUTRON1

234 Volume 1 P/N 367-1746 REV C www.lutron.com/specificationguide | 1.800.523.9466 |

Wallplates and accessories | Designer | Claro and Satin Colors ® ®

Available finishes
Use BOLD color code in model number (Example: SC-1-PL)
Gloss finishes

WH LA AL IV GR BR BL
White Light Almond Almond Ivory Gray Brown Black

Satin Colors® finishes

SW LS BI ES PD TP ST
Snow Limestone Biscuit Eggshell Palladium Taupe Stone

BG PL SG TQ GS DS GB
Bluestone Plum Sea Glass Turquoise Goldstone Desert Stone Greenbriar

Metal finishes*

MS TC SI HT MR MN SS
Mocha Stone Terracotta Sienna Hot Merlot Midnight Stainless Steel

*Stainless Steel finish wallplates include black plastic trim/adapter, visible from side. Match with separate
Black (BL) or Midnight (MN) controls and accessories.

| 1.800.523.9466 | www.lutron.com/specificationguide Volume 1 P/N 367-1746 REV C 235

Wallplates and accessories | Designer | Claro and Satin Colors ® ®

Wallplates for Maestro®, Maestro IR®, Maestro Wireless®, Caséta® Wireless, Pico® wireless,
Diva®, Skylark Contour® and Skylark® controls, and Claro® and Satin Colors® accessories

1-gang* CW-1-XX1 4-gang* CW-4-XX1

SC-1-XX2 SC-4-XX2
W: 2.94 in (75 mm); H: 4.69 in (119 mm) W: 8.37 in (213 mm); H: 4.69 in (119 mm);
P: .30 in (7.6 mm) P: .30 in (7.6 mm)

2-gang* CW-2-XX1 5-gang* CW-5-XX1

SC-2-XX2 SC-5-XX2
W: 4.75 in (121 mm); H: 4.69 in (119 mm); W: 10.18 in (259 mm); H: 4.69 in (119 mm);
P: .30 in (7.6 mm) P: .30 in (7.6 mm)

3-gang* CW-3-XX1
SC-3-XX2
W: 6.56 in (167 mm); H: 4.69 in (119 mm);
P: .30 in (7.6 mm) Multi-gang dimmer installations may require
derating, see pp. 250 – 252.
*Stainless Steel finish wallplates include black
XX1: Gloss and metal color codes, plastic trim/adapter, visible from side. Match
see p. 235 with separate Black (BL) or Midnight (MN)
XX2: Satin Colors® codes, see p. 235 controls and accessories.

236 Volume 1 P/N 367-1746 REV C www.lutron.com/specificationguide | 1.800.523.9466 |

Wallplates and accessories | Designer | Claro and Satin Colors ® ®

Cable jacks
• F-style, 75-Ohm coaxial cable
• Wallplate sold separately

6-gang* CW-6-XX1 Single cable jack CA-CJ-XX3

SC-6-XX2 SC-CJ-XX2
W: 12.00 in (305 mm); H: 4.69 in (119 mm);
P: .30 in (7.6 mm) Telephone jacks
• 6-conductor telephone jack,
RJ11
Important note
• Wallplate sold separately
Multiple devices with line and low-voltage
can be mounted behind a common
wallplate using a standard barrier backbox.
For more information consult Lutron Application
Note #213, Combining Low-Voltage and Line
Single telephone jack CA-PJ-XX3
Voltage Wiring Devices in a Multi-Gang Box at
SC-PJ-XX2
www.lutron.com/applicationnotes.

Custom engraving available for all New Architectural,

Architectural, Designer and Traditional style
wallplates (except Stainless Steel). For wallplate
engraving schedules, go to
www.lutron.com/engraving.

Multi-gang dimmer installations may require

derating, see pp. 250 – 252.
   * Stainless Steel finish wallplates include black XX1: Gloss and metal color codes,
plastic trim/adapter, visible from side. Match see p. 235
with separate Black (BL) or Midnight (MN) XX : Satin Colors® codes, see p. 235
2

controls and accessories. XX3: Gloss color codes, see p. 235

| 1.800.523.9466 | www.lutron.com/specificationguide Volume 1 P/N 367-1746 REV C 237

Wallplates and accessories | Designer | Claro and Satin Colors ® ®

6-port frame Receptacles

• Shipped with six blanks in • Tamper resistant receptacles
matching colors include tamper resistant shutter
• Connectors and wallplate mechanism (shutters are white)
sold separately • Wallplate sold separately
• Connectors snap in
(no tools required)
• Connectors available in
White (WH), unless noted Receptacles
15 A 125 V CAR-15 -XX1
Field customizable 6-port frame 15 A 125 V SCR-15-XX2
6-port frame CA-6PF-XX1 20 A 125 V SCR-20-XX2
SC-6PF-XX 2
Tamper-resistant receptacles
Connectors for 6-port frame
15 A 125 V CARS-15-TR-XX1
Telephone/network jacks 15 A 125 V SCRS-15-TR-XX2
8-conductor, CON-1P-C3-XX3 20 A 125 V SCRS-20-TR-XX2
RJ45 category 3
8-conductor, CON-1P-C5E-XX3 USB receptacles
RJ45 category 5e • Includes two USB ports
8-conductor, CON-1P-C6-XX 3
• Ports are rated for a minimum of
RJ45 category 6 10,000 insertions and removals

Fiber jacks • Includes 1-gang wallplate

MT-RJ feed through CON-1F-MTRJ-WH
SC simplex CON-1F-SC-WH
LC non-flush mount CON-1F-LC-WH Tamper-resistant USB receptacles
ST-style CON-1F-ST-WH 15 A 125 V CAR-15-UBTR-XX1
15 A 125 V SCR-15-UBTR-XX2
Cable jack
F-style, CON-1C-XX3
75-Ohm coaxial cable

BNC jack
BNC connector, 50-Ohm CON-1B-WH
Connectors only for use with 6-port frame.

XX1: Gloss color codes, see p. 235

XX 2: Satin Colors® codes, see p. 235
XX3: Available in White (WH) and Black (BL)

238 Volume 1 P/N 367-1746 REV C www.lutron.com/specificationguide | 1.800.523.9466 |

Wallplates and accessories | Designer | Claro and Satin Colors ® ®

GFCI Receptacles Receptacles for half dimming use

• Self-testing technology • Top half for dimming
allows GFCI to automatically • Projecting nub prevents
check proper operation every standard plug from being used
30 seconds
• Requires replacement plug for
• LEDs indicate status of GFCI dimming table and floor lamps
protection function
• Bottom half is a general use
• Press reset button to reset GFCI receptacle and will fit standard
after circuit interruption duplex plugs
• Wallplate sold separately • Tamper resistant shutter
mechanism
Tamper-resistant, self-testing GFCI receptacles
15 A 125 V, GFCI CAR-15-GFST-XX1 Half dimming, tamper-resistant receptacles
15 A 125 V, GFCI SCR-15-GFST-XX2 15 A 120/125 V CAR-15-HDTR-XX1
20 A 125 V, GFCI SCR-20-GFST-XX 2
15 A 120/125 V SCR-15-HDTR-XX2
20 A 120/125 V CAR-20-HDTR-XX1
20 A 120/125 V SCR-20-HDTR-XX2
Receptacles for dimming use
• Duplex for dimming both
connected loads
• Projecting nubs prevent standard
plugs from being used
• Requires replacement plug for
dimming table and floor lamps
• Tamper resistant shutter
mechanism

Dual dimming, tamper-resistant receptacles

15 A 120/125 V CAR-15-DDTR-XX1
15 A 120/125 V SCR-15-DDTR-XX2
20 A 120/125 V CAR-20-DDTR-XX1
20 A 120/125 V SCR-20-DDTR-XX2

XX1: Gloss color codes, see p. 235

XX 2: Satin Colors® codes, see p. 235

| 1.800.523.9466 | www.lutron.com/specificationguide Volume 1 P/N 367-1746 REV C 239

Wallplates and accessories | Designer | Claro and Satin Colors ® ®

Replacement plug for dimming Mechanical switches

• This plug required for use with • Paddle turns on/off
Lutron receptacles for dimming • Use with any 15 A load
use—plug will also work in
• General purpose switching of all
standard receptacle
sources and motor loads
• Easily replaces the existing plugs
• No derating if ganged
on lamps
• Wallplate sold separately
Replacement dimming plugs
120/125 V RP-FDU-10-WH General purpose switches
White Single-pole CA-1PS-XX1
120/125 V RP-FDU-10-BR 120/277 V 15 A SC-1PS-XX2
Brown 3-way CA-3PS-XX1
UL/CSA/NOM regulatory approvals. 120/277 V 15 A SC-3PS-XX2
4-way CA-4PS-XX1
Important notes
120/277 V 15 A SC-4PS-XX2
• Receptacles and plugs for dimming use are
UL listed for use with all Lutron wallbox dimmers General purpose switches with locator light
included in this catalog. Single-pole CA-1PSNL-XX3
• If there is only one electrical feed to the 120 V 15 A SC-1PSNL-XX4
receptacle, then the duplex DFDU must be used. 3-way CA-3PSNL-XX3
• If the hot and dimmed hot feeds to the split 120 V 15 A SC-3PSNL-XX4
duplex HFDU are supplied from different circuits 4-way CA-4PSNL-XX3
or split-wired with separate switch-legs, a means
120 V 15 A SC-4PSNL-XX4
to simultaneously disconnect these circuits
must be provided at the panel board where
they originate (NEC 210.7(C) 2002 Edition).
A 2-pole circuit breaker or two single-pole circuit
breakers with an approved handle tie can be
used to accomplish this simultaneous disconnect.
Feed-through dimming panels, which are those
without breakers, are recommended when using
the HFDU.
• For more information on dimming lamps consult
Lutron Application Note #109, Guide to Dimming
Portable Lamps via Receptacles, at
www.lutron.com/applicationnotes.
XX1: Gloss color codes, see p. 235
XX 2: Satin Colors® codes, see p. 235
XX3: Available in Almond (AL), Ivory (IV),
Light Almond (LA) and White (WH)
XX4: Available in Biscuit (BI), Eggshell (ES),
Goldstone (GS), Limestone (LS), Sea Glass
(SG) and Snow (SW)

240 Volume 1 P/N 367-1746 REV C www.lutron.com/specificationguide | 1.800.523.9466 |

Wallplates and accessories | Designer | Claro and Satin Colors ® ®

| 1.800.523.9466 | www.lutron.com/specificationguide Volume 1 P/N 367-1746 REV C 241